doosan turning used for sale

Turning diameter: 570 mm Turning length: 650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 21 iTB MAKE   DOOSAN TYPE    PUMA 240 MB YEAR   2004 SPECIFICATIONS Swing over bed Ø  570 mm Control    FANUC 21 i TB Swing in the gap Ø  370 mm Distance between centres   650 mm Spindle bore   77 mm Spindle speeds / ranges  3500 Rpm Power   18.5 Kw DIMENSIONS Length   3430 mm Width    1800 mm Height    1800 mm Doosan PUMA 240 MB Ø 570 with Live tools, we have also some other cnc lathes for sale

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

; Gross weight [kg]: 1340; Engine: Doosan DN03-OOG01; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 108

; Gross weight [kg]: 5650; Engine: Doosan DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

; Gross weight [kg]: 3600; Engine: Doosan DP126LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 625

; Gross weight [kg]: 4200; Engine: Doosan DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800

; Gross weight [kg]: 4800; Engine: Doosan DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

; Gross weight [kg]: 2100; Engine: Doosan P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 285

; Gross weight [kg]: 6250; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1250

; Gross weight [kg]: 1950; Engine: Doosan P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

Machine has been used only 300 hours Machine is still under warranty Machine is like new condition X Y Z = 2500mm x 950mm x 850mm

Multi axis 5 axis simultaneous Capto C63 tool holder Number of magazine: 40

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Doosan PUMA 280LM CNC lathe with C axis Length . 1050 mm Chuck size : 12 inch 5 live tools(4 horizontal + 1 vertical) Machine is in good working condition

Double turret Double spindle Spindle speed : 5000 rpm Number of axis : 8 Tool capacity : 12 + 12 Spindle motor power : 22 Kw Fanuc control unit

Doosan Puma 400L CNC Lathe 15 inch chuck Machine has been purchased December 2013 Max Turning Dia: 560 mm

Doosan Puma MX 2500 S cnc lathe 7 axis Tools are on machine Machine is in very good condition

Diesel forklift Machine Brand: DOOSAN Designation: D90S-5 Year of production: 2012 Counter Reading (mtg): 7970 Empty weight (Kg): 12197 Lifting capacity (kg): 9000 Height. lift. (mm): 3100 Lateral fork travel Mast type: STD UDT review until March 2022 Fuel type: diesel After a large technical inspection for over PLN 30,000 (we have invoices for everything) - new tires - new fore fore fore - regeneration of actuators, - gearbox: discs + sealants - brakes: discs and bearings - all oils, liquids and filters Technical condition: used, very good

Doosan S 400 15 inch CNC lathe Fanuc control unit Machine is in good working condition

Doosan Puma GT2100B CNC lathe 10 inches 2 axis 10 station turret X axis : Q390mm Z. axis: 525mm Chip conveyor Machine is in very good condition

On offer is a DOOSAN lathe, year 2006, type PUMA 160, FANUC computer, USED ONLY 50 WORKING HOURS

Manufacturer DOOSAN Model PUMA 700 LM Year 2005 CNC FANUC 21i TD Capacities Ø Swing over bed 1.030 mm. Ø swing over saddle 800 mm Max turning diameter 900 mm. Max turning length 3.200 mm. C Axis and Driven Tools INCLUDED Chuck size 24” Bar working diameter 164mm. Travels and feedrates X travel 470 mm. Z travel 3.235 mm. Rapid traverse rate X/ Z Axis 12/10 m/min Main spindle Max spindle speed 1500 rpm Speed ranges 2 Main spindle power 75/60 kW Main spindle torque 11.004 Nm Spidle nose A1 – 15 C Axis. Positioning Precision 0,001º Turret No of tool stations 12 Turret tool size 32 x 32 mm Max boring bar size 80 mm. Turret Indexig Time 0.25 s. Rotary tool motor power 11 kW Max rotary tool speed 3.000 rpm. Tailstock Tailstock travel 3.135 mm. Quill diameter 160 mm Quill travel 150 mm Quill bore taper #6 Equipment 3 Jaw-Hydraulic chuck Ø600 mm I ...

Type: Engine, Type number: DAEWOO PO34TI GENERATOR 50 KVA

Doosan LEO 1600 CNC Lathe Fanuc control unit 6 inches Machine has been used only on aluminium Machine has very low working hour Max. Turning diameter mm (inch) 320 (12.6) Max. Turning length mm (inch) 303 (11.9)

; Gross weight [kg]: 9370; Engine: Doosan DP222CC (E); Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

Doosan Puma 280L CNC Lathe Swing over bed mm. 630 Turning length : 1200 mm

FANUC 18iTB CNC X Axis travel 250 mm Y Axis travel 100 mm Z axis travel 580 mm Powered tool station No. 12 Self-centering chuck Diam 254 mm Spindle speed Rpm 35 -3500 Spindle power 15/22 kW C axis travel ° 360 Tool dimensions 25×25 mm Tool rotation speed Rpm 50-5000

CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection

Doosan Puma 700XLY CNC Lathe Fanuc control unit Max. turning diameter : 900 mm Machine is in excellent condition Year : November 2017

Machine weight: 4200 kg Circulating diameter above the bed: 600 mm Revolving diameter above support: 400 mm Spindle speed - range: 45-4500 Max. workpiece weight: 120/300 kg Max. turning diameter: : 300 mm Max. turning length in chuck:: 510 mm Max. diameter of turned bar:: main spindle/counter spindle: 65/34

Turning diameter: 575 mm Turning length: 1300 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T SPECIFICATIONS Swing over bed Ø  575 mm Control   Fanuc 18 T Swing over cross slide   370 mm Distance between centres  1300 mm Spindle bore77 mm Spindle speeds / ranges  3500 Rpm DIMENSIONS Length   4000 mm Width  1980 mm Height  2098 mm The used lathe Doosan Puma 250 LMB type with CNC Fanuc 18 T  

Manufacturer DOOSAN Model PUMA 3100L Year / Month 2013 / 07 CNC FANUC i SERIES Capacities Ø Swing over bed 850 mm. Ø over front door 720 mm. Ø swing over cross-slide 670 mm Max turning diameter 525 mm. Max turning length 1280 mm. Chuck size 12.5” Bar working diameter 102 mm. Travels and feedrates X travel 293 mm. Z travel 1.280 mm. Rapid traverse rate X/ Z Axis 30 m/min. Main spindle Max spindle speed 2.800 rpm Speed ranges 2 Main spindle power 22 kW Main spindle torque 6.605 Nm Spidle nose A2 – 11 Turret No of tool stations 10 Turret tool size 25 x 25 mm Max boring bar size 50 mm. Indexing Time 0,15 s Tailstock Quill diameter 100 mm Quill travel 100 mm Quill bore taper MT#5 Equipment Chip conveyor INCLUDED 3 Jaw-Hydraulic chuck Ø315 mm INCLUDED Automatic Tool pre-setter INCLUDED Hydraulic steady rest SMW Autoblock SLU-X-3.2-MS Others T ...

Doosan DNM 650 II Vertical Machining Center Machine is in good condition

Doosan Puma 400 LMB CNC Lathe C axis Distance between centers: 2000 mm Max turning diameter: 700 mm

Table diameter: 0 mm Turning diameter: 580 mm Turning height: 450 mm Motor power: 0 HP/kW Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: I Series Make Doosan Type PUMA VT 450 Year 2008 FANUC i series Centre height (mm)Swing = 580 Center distance (mm)Height = 450 Spindle bore Speeds 2500 Rpm ATC 12 positions Chip conveyor High pressure coolant  

Table length: 920 mm Table width: 435 mm Longitudinal X: 762 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 828 D Make Doosan DNM 4 Type DNM 400 II Year 2014 Siemens 828 D Table length (mm) L = 920 Table width (mm)W = 435 Longitudinal X (mm) X = 762 Cross Y (mm) Y = 435 Vertical Z (mm) Z = 510 Bt40/12.000/18.5 kW ATC 30 positions 20 Bar coolant- High pressure coolant 20 Bar - LNS chip conveyor - Siemens SINUMRIK 828 D - Taster Renishaw TS 27R - Robot interface for UR 10  

This DOOSAN PUMA TT1800SY lathe was made in the year 2011. It is equipped with a FANUC 31i-Model A control unit. The machine has a spindle speed of 5000 rpm.

This DOOSAN 5100LB Lathe was made in 2018. It is equipped with a Fanuc Series OiT control unit and has 2 axis. The machine has a spindle speed of 1500 rpm.

This Doosan MX2000S lathe was made in the year 2007 and has 15000 hours. It is equipped with a Fanuc Series 16i-TB control unit and has 9 axis. The machine has a spindle speed of 5000 rpm.

This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit.

This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

; Gross weight [kg]: 3100; Engine: Doosan P126TI-II; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 2985; Engine: Doosan P126TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 5950; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000

Turning diameter: 500 mm Turning length: 450 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe