doosan d used for sale

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Admission recess: Ø 168 mm -Passage: Ø 55 mm -Weight: 12 kg

Direct current, gear motor -Power: 6.8 kW -DC motor: Manufacturer Baumuller type DSG 71-M -Gearbox: manufacturer Nord type 32-2AZ-IEC 90 -Translation: 1: 25.88 -Hollow shaft diameter: 40 mm -Speed: 4000 rpm/155 rpm -Tachometer: Manufacturer Stegmann type DG 60 XSR -Weight: 85 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Weight: 18 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 195 mm -Passage: Ø 62 mm -Weight: 9 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Weight: 22 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 160 mm -Throughout: Ø 46 mm -Weight: 9 kg

Immediately available used injection pump

-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper

Sell a Hilti DAG 230-D. Sold incl. the diamond disc. The machine is in good condition, functional and tested.

Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Spiral Kneader Dough Machine Diosna Model: SP 120 A with extendable tank wagons Kneading machine for max. 120 kg dough Cover with timer and 2 gears Lifting and lowering via control Connection 400V, 16A-CEE plug Used machine for export More spiral mixers in stock!

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg

Stick electrodes 3.2 x 350 -Type: FOX DCMS Kb -Price: per package -Number: 5 packages available -Weight per package: 4.3 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 950 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Dimensions: 385/280/H230 mm -Weight: 36 kg

PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 125 mm -without: interchangeable jaws -Passage: Ø 32 mm -Number: 1x feed available -Price: per piece -Weight: 5.4 kg

Control: iTNC 530 Max.travel range: X 500 mm Y 450 mm Z 400 mm A +5 / - 110? - manual C nx 360? - manual Spindle speed ? 10000 rpm Taper ? SK 40 Tool changer ? 16 positon measuring probe for parts set up 3 axis + 2 axis (dividing head) Tool pr

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 0.85 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 600/420/H1140 mm -Weight: 222 kg

Control: iTNC 530 Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Twin Pallets Coolant tank:2500l With spindle cooling, mea

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 930 rpm -Shaft: Ø 24 x 50 mm -Construction: B3 B14 -Flange: Ø 160 mm -Protection class: IP 33 -Dimensions: 355/260/H195 mm -Weight: 25 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 2.2 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 350 x 50 mm -Operating voltage: 380 volts -Dimensions: 760/490/H1140 mm -Weight: 238 kg

Control: Mill plus Max.travel range: X 765 mm Y 460 mm Z 560 mm B +30? / -120? C nx 360? Clamping table: 630 x 500 mm Spindle speed ? 12000 rpm Taper ? HSK 63 Tool changer ? 120 positon Four Pallets Coolant tank:2500l machine has spindle cool

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1430 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Number: 2 motors available -Price: per piece -Dimensions: 320/277/H215 mm -Weight: 25 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft: Ø 22 x 50 mm -Construction: B3 -Price: per piece -Number: 1x available -Dimensions: 350/280/H205 mm -Weight: 30 kg

Control: Heidenhain Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine

electric motor, three-phase motor -Power: 0.25 kW -Speed: 700 rpm -Shaft: Ø 19 x 40 mm -Design: B3 -Protection class: IP 54 -Dimensions: 275/210/H160 mm -Weight: 11 kg

Control: Mill plus Max.travel range: X 1250 mm Y 1000 mm Z 1000 mm B -30? / +180? C nx 360? Clamping table: 1000 x 800 mm Spindle speed ? 10000 rpm Taper ? HSK 100 Tool changer ? 120 positon Twin Pallets Coolant tank: 2000l machine has spindl

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun -mobile version: -Connection: 1/2 inch -Cooling unit output: 0.33 kW -Water volume flow: 500 l / h -Dimensions: 895/600 / H1020 mm -Weight: 156 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 55 mm -Weight: 11 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par

Pressure measuring device, flow measuring device, measuring and control technology -Manufacturer: Fischer Mess- und Regeltechnik -Type: DE45N50041PK03MW -Number: 4x measuring devices available -Price: per piece -Dimensions: 90/100/H70 mm -Weight: 0.3 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 130 mm -Through hole: Ø 37 mm -Weight: 3 kg

Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa

with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha

Pressure measuring device, flow measuring device, measuring and control technology -Manufacturer: Fischer Mess- und Regeltechnik -Type: DE45D90041PK03MW -Number: 1x measuring devices available -Price: per piece -Dimensions: 90/100/H70 mm -Weight: 0.3 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 195 mm -Passage: Ø 61 mm -Weight: 11 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 165 mm -Passage: Ø 47 mm -Weight: 7 kg

Ball valve, ball valve internal thread -Pressed brass -Internal thread: 2 inches -full: passage, full ball -Number: 63x ball valves available -Price: per piece -Weight: 2.1 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 160 mm -1 set: outside jaws -Passage: Ø 42 mm -Weight: 11.2 kg

Three-phase motor, electric motor -Power: 1.8 kW -Speed: 1420 I/min -Shaft: Ø 20 x 50 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 345/249/H260 mm -Weight: 28 kg

Three-phase motor, electric motor -Power: 0.75/2.5 kW -Speed: 1430/2860 rpm -Shaft: Ø 25 mm -Construction: B14 -Protection class: IP 44 -Dimensions: 390/195/H250 mm -Weight: 19.35 kg

three-phase motor, electric motor -Manufacturer: Dietz, electric motor type DR 90L/4n -Power: 1.5 kW -Speed: 1720 rpm -Shaft: Ø 24 x 50 mm -Design: B3 -Protection class: IP 33 -Number: 2x motor available -Price: per piece -Dimensions: 325/240/H175 mm -Weight: 18 kg/pc.

Electric motor, three-phase motor -Power: 0.3 kW -Speed: 1330 rpm -Construction: B14 -Protection class: IP 65 -Dimensions: 247/140/H200 mm -Weight: 7 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 2850 rpm -Shaft: Ø 19 x 100 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 355/200/H220 mm -Weight: 12.5 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 28 x 80 mm -Design: B3 -Dimensions: 440/320/H270 mm -Weight: 60 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 215 mm -Throughout: Ø 67 mm -Weight: 14 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg