doosan d used for sale

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: ARI, butterfly valve ZESA with handwheel -Connection: DN200 -Quantity: 1 piece -Dimensions: 330/120/H500 mm -Weight: 14.5 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN40 -Width: 200 mm -Nominal pressure: PN10 -Dimensions: 200/150/H214 mm -Weight: 6.7 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Short cones: 11 -Recess: Ø 199 mm -Weight: 36.5 kg

Two-jaw chuck, 2 jaw chucks, vice, face plate -Chuck size: Ø 250 mm -Short taper: 11 -Rezess: Ø 199 mm -Weight: 35.8 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 270 mm -Throughout: Ø 85 mm -Short taper: 6 -Recess: 157 mm -Weight: 38 kg -with: signs of usage but functional

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 50 mm -Weight: 13.5 kg

We sell 4 pieces of used welding units, welding rectifiers, brand Lincoln DC400, year: 1993, functional, in need of easy repair, only for export For purchase of 4 pieces Price per piece 500,00 E net Single price 600,00 E net

Sorort available used injection line

Immediately available Elevated main start valve

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 209 mm -Weight: 21 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 250 mm -Passage: Ø 70 mm -Short cones: 8 -Weight: 28 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 -Throughout: Ø 80 mm -Weight: 25.9 kg

Immediately available used camshaft

Immediately available used camshaft

Used Double Z-blade mixer, Capacity: 100 kg. New 2009.

Table dimensions: 1000 x 1000 mm table load: 4000 Kg swivelling range: 105 Grad turning speeds: 0,15 - 1,5 U/min height adjustment: 1010 - 1836 mm hollow spindle diameter: mm welding current: 1000 Ampere max. torque on the faceplate: 8000 Nm total power requirement: 6,0 kW dimensions of the machine ca.: m Characteristics: • Made in EU • Self-locking gear, therefore no leading and trailing at eccentric load • Hydraulic height adjustment allows almost limitless positioning • Electronic quality components from Schneider / Siemens / Delta • Frequency-controlled stepless speed of the turntable • High stability through a heavy and compact design • CE certificate • Very good value for money • Standard version comes with remote control and dual foot pedal • 3 years warranty (see warranty conditions) • Hydraulically height adjustable with locking system (for fall protection) ...

Connecting Rod With New Bushing And Used Immediately Available

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 36 kg

Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Three-jaw lining, 3-jaw lining -Feed size: Ø 200 mm -Passage: Ø 56 mm -Rezess: Ø 75 mm, Ø 103 mm -Weight: 17.9 kg

Dough sheeter Rondo Doge SFA 612 -automatic sheeting machine with reel -Manufacturer: Rondo -Model: Doge SFA 612 -mobile on castors -with touch display -Band length 160cm -Band width: 64cm

Immediately available completely overhauled in-store air coolers, we also have used ones in stock

Immediately available new cylinder liner with APR ring

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Passage: Ø 80 mm -Recess: Ø 210 mm -Weight: 18.5 kg

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 160 mm -Passage: Ø 41mm -Weight: 8.7 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 310 mm -Passage: Ø 110 mm -Bayonet: short cone flange cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Weight: 47.2kg

-Spiral mixer Diosna SP 120 D -Type: SP 120 D -mobile -for max. 75kg flour or for max. 120kg dough -with 2 automatic timers -Boiler diameter 75cm -Boiler capacity approx. 180 liters -Machine mobile on castors with a swivel castor -Locking by 2 brakes -Spiral and kettle made of stainless steel -400 volt frequency 50 Hz -Weight of the machine approx. 550 kg -Boiler capacity: 180 liters

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Three-jaw chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Passage: Ø 54 mm -Weight: 12.6 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Feed size: Ø 200 m -Through hole: Ø 54 mm -Short cones: 5 -Bolt circle: 105 mm -Weight: 16.2 kg

Three-jaw chuck, 3-jaw chuck -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

See appendix for the current complete inventory list. Sellers of different models, types and sizes. For deep freezing, plus cooling and air conditioning. With or without defrosting, different slat widths. Models such as: SG, SP, DE, DZ, DF, DP Price on request Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at Website: frigocom.at

Sorfort available in recon or used injection pump

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 190 mm -Passage: Ø 56 mm -Weight: 10.6 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Passage: Ø 56 mm -Weight: 9 kg

Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Hole circle: 156 mm -Passage: Ø 54 mm -Weight: 12.7 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 190 mm -Admission recess: Ø 160 mm -Passage: Ø 56 mm -Weight: 10 kg

WE OFFER AN NICE CONDITION DMU 70 EVO MACHINE IS ON POWER WORKING DAILY ORDERS IN SHORT WE PROVIDE VIDEO OF WORKING

Cutting lenght 6000 mm Cutting thickness 13 mm

Immediately available used injection pump

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange for: three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: 250 mm -Cone diameter: 106 mm -Bolt circle: Ø 4 x 160 mm -Weight: 8 kg

Flange mount -Chuck flange for: jaw chuck -Outer diameter: 270 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 21 kg

Immediately available used injection pump

Flange mount -Chuck flange for: jaw chuck -Outer diameter: 215 mm -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 9 kg

Shaft vice, machine vice -Clamping diameter: 95 mm -Dimensions: 290/200/H225 mm -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Key data: 500

ORMAL (DIEFFE) dowel cutter model TT500 with: - fast-moving blade D=500mm - Blade motor 7.5 hp, Volt 380 - cutting section from 40x40mm to 130x140mm - Automatic loader with transport clamp for the bars - magazine length 5 m (open at the back, can carry longer bars) - production capacity up to 45 cuts per minute of 80x80xL=80mm dowels - overall dimensions approx. 6 x 1.8 m - complete with electrical panel CE standard machine