doosan d used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 160 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27 x 292 mm -Weight: 0.3 kg/piece

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston diameter: 50 mm -Piston rod: 20 mm -End position cushioning: adjustable on both sides -Max. Pressure: 12 bar -Dimensions: 300/64/H64 mm -Weight: 1.95 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 125 mm -Piston diameter: 16 mm -Piston rod: 6 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 20 x 236 mm -Weight: 0.15 kg/piece

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 50 mm -Piston diameter: 20 mm -Piston rod: 8 mm -Dimension: Ø 27 x 205 mm -Weight: 0.25 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston diameter: 40 mm -Piston rod: 16 mm -Max. Pressure: 12 bar -Dimension: Ø 46/205 mm -Weight: 1.5 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 25 mm -Piston diameter: 10 mm -Piston rod: 4 mm -Dimension: Ø 15 x 111 mm -Weight: kg

Key data: 630 mm, 560 mm, 560 mm

Year of construction 2003 Heidenhain control MC 422 18200 Spindle hours NC rotary table installed in rigid table 1000 x 600 mm Controlled B-axis 24-fold tool changer Workspace Tool holder SK40 Motor spindle 12000 rpm Incl. coolant system, chip conveyor (auger) Top condition! Machine weight 6500 kg Transport dimensions: 3.5 x 2.7 x 2.21 m

Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm -Weight: 29 kg

Double hydraulic pump, oil pump, gear pump -Kracht: gear feed pump -without: drive -with: clutch bell for the drive -Dimensions: 490/250/H345 mm -Weight: 19 kg

Sprockets, duplex sprocket, sprocket -Number of teeth: 23 teeth -Diameter: 345 mm -Total width: 120 mm -Tooth width: 30 mm -Socket: O 90 mm -Number: 3x sprockets available -Price per piece -Weight: 50 kg -other sprockets: in stock

Sprockets, duplex sprocket, sprocket -Sprocket pitch: Duplex 1 1/2 x 1 -Number of teeth: 25 teeth -Diameter: 318 mm -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Short cone mount for: bayonet disc attachment -Cone size: 6 -Cone: Ø 106 mm -Bolt circle: Ø 133.4 mm -Through hole: Ø 54 mm -Weight: 15 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...

Dadaux TITANE 45 Liter Cutter Stainless Steel used Stainless steel cutter with 6 cutter head and knife shaft brake Two speeds for knife shaft and bowl Machine has the following defects: Screw for plaster opening is missing 4 feet missing Noise protection cover broken Main switch toggle broken Lamp cover of the control panel is missing Bowl runs slightly out of round The shortcomings have already been taken into account in the pricing Video about test run available

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm -Weight: 8.1 kg

Since we don't use this device enough, we sell this super forklift with Volvo engine!

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the co ...

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN16 -Dimensions: 230/165/H310 -Weight: 11.4 kg/piece

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -without: drive -Connection: DN50 -Width: 230 mm -Nominal pressure: PN10 -Dimensions: 230/163/H254 mm -Weight: 9.4 kg

Lid Maho DMC 64 V linear Year of construction 2003 The MMC was overhauled in October, as well as the rectifier. The spindle motor has been overhauled - The encoder is new as well as the glass scale in X. Location: Bochum

three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories -Weight 14.4 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Short taper: 6 -Weight: 28 kg

2-component mixer Capacity: 20,000 ltr.

x-travel: 800 mm y-travel: 400 mm z-travel: 300 mm digital readout: Heidenhain table surface area: 1000 x 520 mm turning speed range: 40 x 2000 U/min spindle taper: SK 40 total power requirement: 2,2 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1700 x 1600 x 1800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm digital readout: Heidenhain 3 Achsen spindle taper: SK 40 spindle turning speed range: 50 - 2500 U/min table-size: 650 x 375 mm weight of the machine ca.: 1,5 t dimensions: ca. mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 -Gradient: 2.5 mm -Weight: 33.3 kg

three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Throughout: Ø 70 mm -recess recess: Ø 194 mm -Weight: 20 kg

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Copy part head, copy head, part head -Copy head rail for: lathe -Dimensions: 100/81/H1747 mm -Weight: 43 kg

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 3000 rpm -Power: 2.9 kW -Construction: B5 -Diameter shaft: Ø 19 mm -Number: 1 piece of motors available -Price: per piece -Dimensions: 295/115/H190 mm -Weight: 10 kg

resistance, wire potentiometer, resistor -Types see pictures -Price: complete -Number of packages: 2 -Weight: 1 kg

Immediately available in recon order used

Available in recon order used

Immediately Overhauled and Used Cylinder Head

Refurbished and Used Cylinder Heads

Sorfort available Refurbished and Used Cylinder Heads

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 9 mm -Length: 24.6 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 6.65 kg

Winch rope, crane rope, hoist rope, wire rope -Wire rope: Ø 7 mm -Length: 18 m -for: electric wire rope hoist -Also other crane ropes: available -Weight: 3.8 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 50 mm -Hole spacing: 388 mm -Tip height: 153 mm -Drawing: in the photos -Dimensions: 430/90/H360 mm -Weight: 14 kg

Sorfort available Refurbished and Used Cylinder Heads

Bezel, stick, lynette -max. Passage: Ø 30 mm -Tip height: 175 mm -Drawing: in the photos -Dimensions: 425/130/H390 mm -Weight: 10.8 kg

Bezel, stick, lynette -Max. Passage: Ø 30 mm -Tip height: 225 mm -Drawing: in the photos -Dimensions: 425/130/H440 mm -Weight: 12.5 kg

Mill Plus Control Built in 1998 24-fold tool changer Working area 500 x 380 x 380 mm Rapid traverses 10000 m/min Rapid traverse 30 m Direct displacement measuring system Tool holder SK40, ISO DIN 69871 max. spindle speed max. 15000 rpm (Kessler) Angle table 800 x 480 mm, load 500 kg Spindle concentricity 300/0.01 mm Weight 3500 kg Machine dimensions: 2.45 x 1.76 x 2.38 m Coolant Injection El. Handwheel The machine is in very good technical condition. Runs quietly and precisely.

Bezel, stick, lynette -Max. Passage: Ø 128 mm -Edition: gunmetal -Dimensions: 500/85/H740 mm -Weight: 35 kg

Bezel, stick, lynette -max. passage: Ø 240 mm -Tip height: 290 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 760/130/H610 mm -Weight: 125 kg

Sorfort available in recon or used injection pump

Sorfort available completely overhauled lubricating oil pump

Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg