doosan d used for sale

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 1160 x 1000 x 1175mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 25mm (s) total power requirement: 30 kW weight of the machine ca.: 13950kg t dimensions of the machine ca.: 4510 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 18,5 kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: 4760 x 1660 x 1140mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 20mm total power requirement: 37+22 kW weight of the machine ca.: 39 t dimensions of the machine ca.: 6684 x 2280 x 2375mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt. mm double T-iron on the x-axis: unbkt. mm U-iron on the x-axis: unbkt. mm total power requirement: 55+15 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 3850x3050x82800 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 7,5 kW weight of the machine ca.: 2,35 t dimensions of the machine ca.: 1580 x 1200 x 1410 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: siehe TD mm double T-iron on the x-axis: siehe TD mm U-iron on the x-axis: siehe TD mm total power requirement: 120 kW weight of the machine ca.: 78 t dimensions of the machine ca.: 6100 x 5150 x 4300mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: siehe TD mm plate thickness: siehe TD mm pre-bending: 16mm total power requirement: 22 kW weight of the machine ca.: 16,65 t dimensions of the machine ca.: 5560 x 2060 x 2050mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: 0 mm with milling disc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmBar diameter max.65 mmTurning diameter500 mmWork spindle (left)Diametre of spindle nose170h5 mmSpindle noseFlat flange Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

sheet width: 3100 mm plate thickness: 12 mm distance between columns: 3260 mm back stop - adjustable: 3 - 1250 mm power capacity: 37 kW voltage: 400 V weight of the machine ca.: ca. 14 t dimensions of the machine ca.: 4,00 x 4,00 x 2,20 m CNC-controlled plate shear www.kefischer.de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale are several screw jacks from the manufacturer NEFF Gewindetriebe GmbH, type C3-RF-6-T30x6, in various designs. These are new or unused components. Basic technical data (slightly different depending on the model): - Type: C3-RF-6-T30x6 - Size: C3 - Ratio: i = 6:1 - Stroke: 300 mm - Installation position: vertically upwards - Spindle type: rotating spindle - Trapezoidal lead screw: TGS-R-30x6-RH - Operating torque: approx. 6.1 Nm / Starting torque: approx. 8.5 Nm - Total lengths: 450 mm or 496 mm depending on the model - Special designs: Models with bellows and adapter available - Spindle nut: Bronze, Ø 60 mm Hint: There are several variants available. Details on the execution can be requested individually.

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

DEPA Compressed Air Diaphragm Pump Manufacturer: Alfa-Laval Type: DL40-UL-T-T Item #: 09855 Year of construction: 1999 LBH: 350 x 460 x 700 mm

Coutant Lambda Power s DRP-480

Diosna D160 2G Lifting Kneading Machine used Boiler and kneading arm tinned Protective grille welded in one place two speeds Boiler was ground by the previous owner in some places does not affect the function, but should be mentioned Machine has been in stock at a dealer for a long time, is therefore dusty and dirty and should therefore be thoroughly cleaned before use Video about test run and other pictures available

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 20 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2110009 Type of machine Shear Make DARLEY Type GS 3100/20 Build in 1987 Type of control Incl. electric guide sheet widht 3100 mm Plate thickness 20 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3000 mm plate thickness: 10 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 4,15 x 3,55 x 2 m Brand: Durma Type: DHGM 3010 Year of make: 2002 Knife length: 3.000 mm Plate thickness: 10 mm Electric backstop Machine dimensions (lxwxh): 4.150 x 3.550 x 2.000 mm Machine weight: 9.800 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spare parts for injection moulding machines Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Demag, Arburg and Krauss Maffei Valves / Proportional Valves Krauss Maffei / Rexroth MNR R900972653 + R900703217 + ZDR 6 DP0-45_40YM W80 MNR R900323180 Krauss Maffei 4WRAP-6 W7-02-21=24K4/M-561=KM / 6250961 00559499 / 00559137 Krauss Maffei 6252527 00559085 Krauss Maffei / Bosch 0 811 402 511 Krauss Maffei SDDB-3-PP-6 S520 + 6252570 Krauss Maffei 6253211 + SDDB-3-PP-6 S520 Arburg 4WRE 10 EA32-13/24Z4/M-425 Nr.41447 Arburg DBETB-10/180 41446 Arburg DBETB-10/25 41494 Arburg HS 1171-X168 176407 Arburg HS 1171-X112 160576 Arburg LS 1171 X112-10 / 83.745 Arburg Mod D681Z4807 Type: P80HXZR5HEA2-X + Mod D633-7396 TYPE A02KO4F0HXY Arburg Mod D681Z4877 Type: P80HXZR5HEA2-X + Mod D633-7468 Type A02KO4F0HXY Arburg Mod D681Z4707B Type P80HXUR5VEA2-X + MOOG Mod D633-7330  ...

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

Spare parts for injection molding machines Spare parts electric Demag Demag Sigmatek DKL 022 KD. 06792862 Demag Dias DTO 163 KD. 06792165 Demag Sigmatek DKL 012 KD. 06792865 Demag Dias DAO 041 KD. 06796265 Demag Dias DEC 181 KD. 06792665 Demag Sigmatek DKL 025 KD. 06793265 Demag Dias DAM 122 KD. 06792265 Demag Dias DDM 163 KD. 06792365 Demag Sigmatek DKL 013 KD. 06793065 Demag Dias DDM 164 KD. 06792465 Demag Dias DM 321 KD. 06014866 Demag Dias AO 041 KD. 06001466 Demag Dias AI 281 KD. 06001166 Demag Dias TO 323 KD. 06013666 Demag Dias DI 32W KD.06715565 Demag Dias PS 242 KD. 06029066 Demag Dias CP 126 KD. 06730365 Demag Dias AI 381 KD. 06013466 Demag Slides AO 081 KD. 06015066 Demag Dias DCP 642 KD. 06791765 Demag Sigmatek DKL 002 KD. 06111966 Demag Dias DAM 124 KD. 07024865 Demag Dias DDM 163 00733445 Demag Dias DEC 161 KD. 00703303 Demag Dias DAI 883 KD. 06 ...