doosan d used for sale

Key data: 400 KW, 500 kVA, 400 V

MODEL: EQ-VP500400 GENERATOR ENGINE: Volvo Penta TAD1345GE FREQUENCY (HZ): 50 VOLTAGE(V): 400V/230V GENERATOR POWER: 500(kVA) / 400(kW) CYLINDERS: 6 FUEL TYPE: DIESEL COOLING: WATER-COOLED WEIGHT: 3400kg DIMENSIONS L/W/HEIGHT (MM): 320011501800 The engines are new, complete including control, diesel tank, exhaust and batteries. Network monitoring, grid feed-in Soundproofed Immediately ready for use. Control: Deep Sea Electronics (DSE) Alternator: Leroy-Somer Additional: Automatic Transfer Switch (ATS) 63A/100A ABB & Schneider Disconnectors GenCloud Connect with a phone or computer Single-phase valve 50°C-55°C Radiator External Diesel Tank Lubricating Oil Heater Water Heating Dispatch: Worldwide transport including unloading is possible for an extra charge To be able to quote an exact freight price, please send us an inquiry with your details and full address ...

Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price

REMONNAY re-cutting machine Type DR8/225 Cutting height 225 mm, 7 stalk adjustment variable with mechanization, S-separation and saddle conveyor Feed roller table with reversing and alignment feeder Extraction device with cross-cut saws with side goods separator and pull-off roller aisle incl. electric control cabinet and control

Rated power at 50%ED: 63kVA Short-circuit current: 31kA Electrode force: 730daN / double stroke Extension: 500mm --- - Electrode arm top-straight D45/25/500g - Electrode arm bottom-straight D45/2/500g --- Welding control: MPS 10 (5-times, 8-program) --- Spring pull on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Type: Ruhle SR2 with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 180 cm Height: 125 cm Delivery time: 10 working days after advanced payment

- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg

Machine details 1105-02953 Machine type Machining Center - Vertical Make DECKEL-MAHO (DMG) Type DMC 64V Built 2002 Control type Cnc Location Haguenau Origin Germany Delivery Right away Freight base from stock Price On request Technical details x-Way 640 mm y-way 600 mm z-way 500 mm Control HEIDENHAIN TNC 530 Machine weight approx. 8 t Information 1 gebr. CNC vertical BAZ Fabr. DECKEL-MAHO Type DMC 64V linear, Y.O.M. 2002 1 used CNC Vertical Milling Center DECKEL-MAHO type DMC 64V linear, built 2002 WITH 2 AXIS PART APPARAT INCLU CNC Control HEIDENHAIN TNC 530 30-fah tool changer Conveyor 30-fold ATC chip conveyor Technical data / technical details: X-Way / X-travel 640 mm Y-way / Y-travel 600 mm Z-way / Z-travel 500 mm Spindle holder / spindle taper SK40 Speed range / spindle speed 0-12000 rpm Feed range X , Y , Z / feed range X , ...

Item number 90045-0337 Engine control card, engine control

Dimac packing machine Capacity: 35 packages / min, shrink film. After major renovation, technical condition like new

Control SIEMENS Sinumerik 840D Specifications: Workspace - Max. rotation and turning diameter 2,000 mm - Max. turning height 2,000 mm - Face plate diameter 1,600 mm - Max. face plate load 11,200 kg - Chisel slide travel (vertical) 1,400 mm Smallest plunger diameter 330 mm Plunger cross-section 250 x 210 mm - Drive power of the main motor 71 kW - Crossbar adjustment 1,170 mm - Crossbeam support of central face plate to the right 1,170 mm - From the middle of the face plate to the left 25 mm Speed of faceplate: - Number of transmission stages 2 - 1 level 3.15-80 min-1 - 2 Level 12.5-315 min-1 - Lifter and support hydrostatically guided Feeds - X and Z 0.1 2000 mm/min - Rapid traverse X and Z 6,000 mm/min - Weight approx. 24,000 kg - Voltage 400 V 50 Hz - Connected load 175 kW - Space requirement L = 10,000 mm B = ...

DISPERMAT H-drive Type: 4V30M Power: 0.37 kW Speed: 1400 rpm freely adjustable adjustable even in standstill Life-long lubrication

Key data: 2300 , 400

Entire biogas plant for sale. - 2x Mesophilic digesters - 1x Thermophilic fermenter - 3x Buschmann mixers - 60,000 tons/year - Maximum input; 350 tons of solid product and 500 tons of liquid product/week - Activated carbon filter - Gas pretreatment line - 1x Guascor HGM560 Bio gas generator - 1x Waukesha APG1000 Bio gas generator - 1x Cummins (dual fuel) - 1x Gasanalyzers - Drycoolers - Valveplatform - Hyganisation units - Control cabinets etc etc - Transformers (1x2500kVa/ 1x 1500kVa) - All equipment belonging to the biogas plant is in the price. There is an option to also take buildings and other attributes. The biogas plant will not be operational until July 2024. There is an option to supply other CHPs or to overhaul the old CHPs. The plant is open for inspection and everything is negotiable!

Pressing force: 160 kN Impact stroke: 100 mm Mounting height: 350 mm Hole in the table: 100 mm Pushhole bore: 32 mm Stand passage: 650 mm Table size: 630 x 400 mm Hydraulic pressure: 280 bar electr. Connection: 380 V, 5.5 kW Space requirement: 1550 x 1050 x 2400 mm Weight approx.: 3 t

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg

BOEHRINGER VDF DUS 1000 CNC lathe was built in 1993 in Germany. The machine, designed for machining workpieces with a maximum diameter of 1000 mm, delivers excellent turning results during even the most intensive challenges, thanks to its extremely stable design and reliable components. The spindle is driven by an stepless AC motor, which allows efficient turning in two different, optimally adapted speed ranges. All axes, on the other hand, have powerful servo drives, guaranteeing excellent dynamics and positioning accuracy throughout the machine’s lifetime. This is rounded off by an intuitive SIEMENS CNC control with many functions for easy operation and programming. The BOEHRINGER VDF 1000 DUS lathe weighs approximately 10100 kg. Technical specifications of BOEHRINGER VDF DUS 1000 metal lathe - turning diameter above the bed: 1000 mm - turning diameter over transverse slide: 710 ...

Diosna spiral mixer Model: SP80 D Serial: 9611-2118 80kg stainless bowl, stainless dough hook, two speeds, two timers, 3Ph

- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...

Cooling compressor, Cooling compressors, Double compressor, Tandem compressors Manufacturer: DWM Copeland Type: DR6J1-4000-EWM Built: 1989 Condition: Used Weight: approx. 450 kg For more data, see also the photos All information without guarantee

DETROIT DIESEL 8V 71 TI 380 HP - 2100 RPM Listing ID 20093 Make DETROIT Model 8V 71 TI - 24V STARTER - Serial No. Cylinders 8 V / Inline V Power 380 HP RPM 2100 RPM General Info Condition: Runner Application: Marine Weight (kg): 1300 KG Cooling : Water Cooled WITH EXPANSION TANK Dimension 150 x 120 x 140

GEARBOX INFO Listing ID 20102 Make TWIN DISC Model MG 5202 SC Serial No. 3AE 190 Power RPM REDUCTION 2.48:1 General Info Condition Runner Application Marine Weight (kg) 750 KG

DETROIT DIESEL 6 71 TI 485 HP - 2500 RPM Listing ID 20095 Make DETROIT Model 6-71ti - 24V STARTER - Serial No. 6A 0474626 Cylinders 6 V / Inline INLINE Power 485 HP RPM 2500 RPM MAX RPM 2700 General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / WATER COOLED TURBO / HEAT EXCHANGER Turbo WET Dimension 130 X 100 X 120

Storg BvbA The Storg BvbA plant has the following scope of supply 2x demountable mesophilic digisters 1x thermophilic digester consisting of concrete. However, only the roof can be dismantled 3x Buschmann mixers incl stainless steel piping, control cabinet and frequency controllers 1x Active carbonfilters 1x Guascor HGM560 (1,300kWe) 1x Waukesha APG1000 (1,000kWe) 1x Cummins Diesel (1,000kWe) 1x Gas pretreatment line + gas analyses stations 2x Transmorfators (1250KVa + 2500KVa) 4x Emergency coolers 2x Hygienysation line (15.000L Incl mixers and HEX inside tanks 1x Scales 1x Hydro unit 1x Stainless steel mixing tank 10,000L incl mixers 3x Silo (150T) 1x Command block compressed air system + Spare parts Walking floors, piping, grinders, gas analyzer, Vogelsang pumps, flowmeters, shredders, HDPE Urea tank, waterlocks and control boxes, screws are included in this price  ...

DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20096 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry

Diosna SP 240 A DL with 3 bowls -Machine after overhaul - New bearings, new V-belts, new switches, new buttons, - 2 speed - 2 o'clock for 30 minutes - 3 boilers - For 240 kg dough

DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20097 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry

The Daub Automatic Hanseat is a multi-deck oven for batchwise, stepwise and continuous baking production with thermal oil technology

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Used pressure filter for diatomaceous earth, Diemme, type FA 10. Filtration area 10m2. New 1986. Stainless steel.

Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used Top Special price For your info - The current new discounted price of a similar product is € 1955 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Used - top condition The part was purchased from a company's spare parts warehouse, was only used for a very short time and is in very good condition. Standard cylinder with locking unit, DNC-125-500-PPV-A-KP, 163494, Festo, used-Top, consists of: - Standard cylinder DNC-125-PPV-A (current discounted new price € 419 excl. VAT) - Locking unit KPE-32 (current discounted new price € 1536 excl. VAT) - and a longer piston rod Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, wh ...

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Linear drive, stroke 420mm, DGPL-80-420-PPV-A-KF-B, 161797, Festo, used tested Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used and tested! The part was purchased from a spare parts warehouse of a company, was tested by us and checked for leaks. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions appl ...

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

IMA OVERWRAPPING MACHINE, MODEL BFB DIVISION 3711 Year of construction: 2016 Production reaches 110 cycles/min handling somewhat larger sized products. Changeover procedures are fast and easy, to avoid unwanted downtime. High quality individual or multiple over wrapping for regular product Complete with a device to lift the film-driving rollers during product elevation These machines enable the use of extremely thin films and avoid the film sliding around the product, thus obtaining the perfect over wrapping finish The equipment uses standard Siemens electrical components and a Siemens PLC. The steel frame is oil-tight and lubrication is by means of oil bath. TECHNICAL SPECIFICATIONS Electrical frequency: Hz 50 Operating voltage: Volt 380 Air pressure: bar 6 DIMENSIONS Net weight: Kg 1500 Length approx.: mm 6400 Width approx.: mm 1735 Height approx.: mm ...

ID NO 20109 MARINE DIESEL ENGINE Reference number 20109 Brand DETROIT Model 12V71 Power 382 HP RPM 1800 MAX RPM 1950 Serial number 12VA 085003 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 30 Flywheel INCLUDED Governor Exhaust system WET Turbo NONE Cooling system HEAT EXCHANGER Starter INCLUDED Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO PANEL Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) APPROX 2500 KG

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Max. size= 0 x 0 cm, Availability= 082023, Air humidification water treatment system DAN FUGT with 2 nozzles LOT Loaded in truck or container

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

DEUTZ SBV 6 M 628 - 882 kW - 1200 HP - 926 RPM Reference number 20116 Brand DEUTZ Model SBV 6M 628 Power 1200 HP 882 KW RPM 926 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor HYDRAULIC Exhaust system DRY Turbo WET Cooling system WATER COOLED Starter YES- AIR Remarks RUNNING ENGINE FEATURES Raw water pump INCLUDED Expansion tank Heat exchanger DIMENSIONS LxWxH (cm) 3200 mm x 1500 mm x 2450 mm Weight (kg) APPROX 11000 KG

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Mobile Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Offer via gebr. Suhner Shaft Grinding Machine Rotovar DKM 7 Flexible Shaft Machine Shaft Grinding Machine Grinding Rotovar DKM7 Range: Wave A, 1000-12000 rpm. Wave B, 4600-40000 rpm. (400 V, 50 Hz, 3 Ph, 3.2 kW) incl. accessories 1 belt grinding head 1 brush grinding head Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.

Generator set MAN 315VA 7mpm39i2n Type D2866LXE 310 kW with control cabinet

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...