doosan d used for sale

RECON Part number: 0210 5215 Counter clockwise ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

I am offering them a complete vertical packaging plant. Multihead weigher by Ishida Vertical flow of Hassia Redatron and Bosch Bosch cartoning machine If you are interested, please contact me.

RECON Part number: 0215 4064 / 0400 5112 / 0400 3113 Air start ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

Machine type: Forklift / Forklift Manufacturer: Still Model: R33 Built: between 75 and 80 Condition: ready for use (used) Price 7,450 net plus VAT Location Warstein, Germany Reference M-STI-0121 Description We offer you a used forklift from the manufacturer Still Technical data: Capacity: 6t Weight: approx. 9t Engine hours: 9986h Width: approx: 2250mm Fork length 2000mm Tine adjuster max 2100mm tine outside Lighting: Headlights and Rear Lights UVV Test: 01/2022 Mercedes Motor The forklift is in use with us, jumps immediately in any weather. No electronics. Operating hours may still vary, as the forklift is in use. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a ...

Exchange engine overhauled without starters, alternators, incl.fuel injection-system Lombardini LDW1404/Deutz F4M1008F MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring8 D-27404 Zeven Tel:0049(0)4281-950583 Fax:0049(0)4281-950585 miw-zeven.de info@miw-Zeven.de

Moog valve by Husky injection molding machine, with open/close block, used, functional

Moog valve for injection, used, functional

One used 2650 KVA AEG 5250V alternator ( generator end ) for sale. The alternator is in a good running condition. He was driven by a AEG Kanis G20 back pressure steam turbine. The location is our warehouse in solingen, germany. Brand: AEG Type: DKBH 4565/04 voltage: 5250V Electrical power: 2650 KVA RPM: 1500 rpm Year of construction: 1983 Weight: 8 tons Price on request: Here you can download the alternator pictures: (6 MB) abc.stromerzeuger-discount.de/Generator_2650KVA_5250_Volt_AEG/Generato r_DKBH_4565-04_AEG_2650_KVA_AEG_5250_Volt.zip Call us : 0163/5263546

Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet

KALMEIJER Pastry moulding rolls (standard A,B + C rolls)for KGM Christmas motifs used, good condition, different motifs: Spekulatius sorted German males Skat Nikolaus with fir tree (special roller)

Panasonic AC Servo Motor Driver MSDA043A1A

Firing piston with guide bush, 1542 x D170 / D115mm, Oleopress, new -50% Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of an aluminium die casting company and has never been in operation, is completely as new and in the original packaging. Suitable for the Oleopress aluminium die casting machine OL. Technical data: - Total length 1542 mm - Piston rod D115 mm - Piston bronze D170 mm x 110 mm with 5 new piston rings - Guide bush bronze, AD 145 with 2 O rings, length 118 mm, - flange guide bush AD 185 x 18mm, pitch circle D 165 z=8

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

Oil tank double-walled 1000 L fresh oil tank - year of production 1998 - material St 37 / 2 - double-walled Incl. oil pump and all fittings and pipes, cables, etc. Transport can be arranged at low cost.

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM

Cabins of disassembly for the following machines: ISEKI SG incomplete ISEKI SF 300 330 333 ISEKI TX ISEKI 5000 / 5100 Gutbrod 2850 AS incomplete SABO 1502 Voss incomplete Ransomes 350 D incomplete Ransomes Commander 3510 Ransomes fairway 405 Shibaura CM reform Reform Muli - only door right side Kramer Tremo - only door right side

RECON - pn. 0405 2497 - standard size, polished - flange diam. 178mm - incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Duker Rex RK 45, 45 liters bowl cutter with brand new noise reduction cover, 2 knife speeds, mixing 2 speeds, 2 separate bowl speeds. You are very welcome to test the machine in our facility in Koblenz, Germany.

IKA works DIS Pax reactor DR 3-13/4, 18.5 kW, 3.000 rpm, capacity up to 20.000 litres / hour, maximum pressure 2.5 bar.

Acoustic enclosures Aerzener Delta in different sizes in stock, short delivery time.

RECON Part number: 0215 3299 incl. GL test Diam.: 123,50mm / 97,75mm (2nd/1st stage) incl. gearwheel and counterweights ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Camshaft Deutz 528-6 RECON Part number: 0206 5541 (0206 5542 + 0206 5543) Left engine, clockwise ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us