134,853 used machines on RESALE, but how to find them? Machine Search
Safe / Data backup cabinet, Lampertz, S 120 DIS – used - : Price: 650.-€ (net), ex location! Manufacturer: Lampertz Type: dis-data safe Year of Make: 1989 Audit report: 43011 Grade: S 120 DIS Fable No. 28069 S3 Curb weight: 650kg Typgepr. according to RAL-RG 626/7 External dimensions: Width approx. 80cm Depth: approx. 83cm Altitude: approx. 1,325m 1 key available Condition: good Available: immediately Location: Frankenberg camp / Saxony
Ultrafilter Laserpac LP 0072 Compressed Air Treatment Dryer Industrial adsorption dryer and CO₂ cleaner from the premium manufacturer Ultrafilter (Donaldson) This system has been specially developed for applications that require absolutely high-purity compressed air – ideal for the operation of laser cutting systems, the pharmaceutical and food industries or electronics production. The system not only removes moisture in a 5-step process, but also cleans the compressed air extremely efficiently from oil vapors, particles and carbon dioxide (CO₂). Technical data at a glance: - Manufacturer: Ultrafilter (Donaldson) - Model: LP 0072 - Power supply: 230 V / 50 Hz - Medium: Compressed air - Volume flow rate (at 5.5 bar g): Inlet approx. 36.3 m³/h | Discharge min. 13.5 m³/h - Operating pressure: min. 5.5 bar g | max. 16 bar g - Temperature range (medium/environment ...
Key data: 170 mm
Twin-screw extruder Make : COPERION ( Werner & Pfleiderer ) Gearbox make : P.I.V Type : ZSK 170 W 1920/1750 Year of construction : 2021 / 2002 / 1986 Screw diameter : 172 mm Screw speed : 4,9 - 49 min-1 Max. torque : 17,500 Nm Main engine : 216 kW Since 2021 a total of over €420,000 has been invested in new components and factory overhauls (some of which were previously unused) The extruder was in use until Aug / 2023 and has already been dismantled ready for transport. The components are partly redundant and date from the years 1986 - 2021. The scope of delivery consists of : Twin screw degassing Coperion DSE 180 - Year of manufacture 2021 ( 180 t€ ) Main gearbox P.I.V - 1 x year of manufacture 2002, factory overhauled ( 233 t€ ) in 2021, unused - 1 x year of manufacture 1986, factory overhauled in 2016, used 2021 - 2023 Main engines Siemens, ...
used
die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist dringend erforderlich, falls nicht schon vorhanden.. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.
Key data: 30 mm, 700 mm
Radial drilling machine Manufacturer Danube Type DF130 / Danuflex 130 Digital Year of construction 2003 Spindle speed 40 - 3600rpm Feed rate 0.05 - 0.55 mm/rev Column diameter 170mm Quill stroke 170mm Table size 630 x 1200mm Table load 1000kg with 3D button Heidenhain Instruction manual available.
die Steuerung ist vorbereitet für Kompressor-Gleichlaufsteuerung. inkl. · Drucktaupunkt-Steuerung ·Mit einer Drucktaupunkt-Steuerung können Sie den Trockner im starren oder variablen Zyklus betreiben. Im starren Zyklus erfolgt die Umschaltung nach einer festgelegten Zeit (in der Regel nach 5 Minuten). Im variablen Zyklus erfolgt die Umschaltung abhängig vom erreichten Drucktaupunkt und der Beladung des Trockenmittels. Die Adsorptionszeit im variablen Zyklus beträgt maximal 60 Minuten. Neugerät Achtung: Das Gerät wird ohne Vor-, und Nachfilter geliefert. Ein Vorfilter ist in den meisten Fällen dringend erforderlich. Siehe Optionen unten. (Bild: Katalogbild) Erforderlich: Vorfilter (lose beigefügt) - Euro 3.600,- + MwSt. Nachfilter (lose beigefügt) - Euro 3.600,- + MwSt.
Used spiral mixer DIOSNA, type: SP 160 D -In good bakery condition- - Stainless steel frame, spiral and boiler - up to 160 kg dough / approx. 100 kg flour - 2 forward gears / speeds - 1 reverse gear - 2 timers - Automatic transition from gear 1 to gear 2 - Emergency stop - Condition: Technically very good, runs very smoothly - Ready for immediate use - Video can be sent The mixer is in good used condition and is immediately ready for use. Inspection and test run are possible by arrangement.
used
Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmGeneral2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Work spindle (right)Spindle diametre on front bearing90 mmSpindle bore45 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Shank diametre according to DI ...
Slijphoek: 40 tot 180 graden 3,6 kW Max dia: Ø 2 > 50 mm Number of rotations grindingwheel: 2880 rpm Weight: 400 kg
bore capacity in steel (diameter): 40 mm throat: 250 mm bore stroke: 125 mm spindle taper: MK 4 spindle turning speed range: 50 - 2500 U/min : 550 mm : 230 mm table surface area: 820 x 240 mm connected load frequency: 400 V total power requirement: 0,8 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control Working areaSwing diameter over guide ways580 mmClamping chuck diameter max.250 mmWork spindle (left)Spindle bore73 mmBar diametre65 mmSpindle diametre on front bearing120 mmMain drive 1Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmMax. torque (40% DC)168 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)168 NmWork spindle (right)Spindle bore45 mmSpindle diametre on front bearing90 mmMain drive 2Drive power (100% DC)12,6 kWDrive power (40% DC)16,2 kWSpeed range- 5000 rpmTorque (100% DC)48 NmMax. torque (40% DC)62 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)62 NmSlide 1Longitudinal stroke465 mmTransverse stroke185 mmY axis, vertical+/- 40 mmTool holder 1Number of tool stations12 Shan ...
General SKU291Y517 MakeFryma Koruma Mounted on framecheck Main Features MaterialStainless steel Motor1.65 KW Inlet diameter30 mm Specified Features - Deaerators De-aeratorcheck Vacuum de-aeratorcheck Vessel capacity± max. 280 l. Vessel diameterø 640 mm Cylindrical height500 mm Conical height1000 mm With centrifugal disccheck Motor1,1 kW 220/380 V 1420 rpm With vacuum pumpcheck Motorcheck With product pumpcheck Motor0,55 kW 220/380 V 1400 rpm MaterialStainless steel 1.4552 General LocationBarneveld With switch(as is) Floorspace0,7 x 1,60 m Total height2,20 mDeaeratorsNew arrivalsFryma KorumaDe-aerators > DeaeratorsNew arrivalsBrand > Fryma Koruma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...
Danube DR 23 - High Radial Drilling Machine -Drilling capacity / steel approx. 28mm -Projection approx. 700mm -Morse taper MK 3 -Speed range 70-1550 rpm - Gearbox -Feed range 0.075-0.3mm -Drilling depth 130mm -Tapping device -Drill chuck -Hydraulic clamping -Documentation Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900Kg
Gentilin Clinic Dry 6/90 HS – Professional dental compressor with membrane dryer & sterile filter (YOC 2018) High-quality oil-free piston compressor of the Clinic Dry series from Gentilin (Italy). Model: CLINIC DRY 6/90 HS Serial number: DKHS69025 0001 /18 Technical data: • Power: 3 kW • Voltage: 400 V / 50 Hz / 6.5 A • Speed: 1,400 rpm • Max. operating pressure: 10 bar • Tank: 90 liters stainless steel (AISI 304) • Operating mode: S1 – 100% continuous operation • Weight: 89 kg • Equipment HS version: membrane dryer + sterile filter (0.01 μm) → very dry and germ-free compressed air • Hour meter: 339 hours (white) / 95 hours (red) – extremely little run! The compressor is fully operational and in very good condition. Ideal for dental practices, dental labs, CAD/CAM or medical applications where the highest air quality is required (suitable ...
EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer, The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 71
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2100; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 289
RATING TYPE STANDBY:, Output available with varying load for the duration of the interruption of the normal source power. Average, power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage, of 500 hours per year.; Gross weight [kg]: 11481; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: battery charger and coolant heater; Water Tank Volume [l]: 1000
Compressor met Abac-droger Diesel-oil (1) -- Naphte (2) -- Electr (3): electric Max output: 11 bar voltage: 380 volt Volume flow rate: 653 liter/min Power imput: 5,5 hp / 4 kW Volume (L): 270 liter Length: 1575 mm Width: 680 mm Height: 1150 mm
Mixing and kneading machine with bottom pressing and shaping Diameter 225cm x H 62cm for approx. 2700l/1,000kg flour with automatic cut-to-length machine with tilting and run-out table completely stainless steel with platform and stairs - dismantled available from STOCK
Dürselen Corta PB 04 Paper drilling machine Age: 1999 4-spindle Drill hole diameter: 3-15 mm Drilling distance: 31.7 – 293 mm Max. stacking height: 50 mm
Complete heavy-duty roller conveyor system from previous door production for self-dismantling or with separate dismantling by agreement, Approx. 75 linear metres Heavy-duty roller conveyor elements without drive, Roll lengths 500mm, roll diameter 100mm Stands, can be dismantled into individual sub-segments, of which 6 elements L5800 W600 H320mm standing up to H459mm with end-stop rocker, 2 elements L3000 W600 H320mm standing up on H450mm with end-stop rocker, 7 Elements L3800 W600 H320mm with End Stop Rocker 1 element L3050 W1150 H450mm 2 cross carriages L2800 B800 H450mm with rope stop 1 cross carriage L2400 B1150 H450mm with one-sided stop 1 cross carriage L2100 B1200 H450mm with single-sided stop 1 movable roller conveyor element L3800 W800 H 400mm with rope stop & stanchion pockets Complete acceptance
The machine is functional and currently still under power, incl. loading magazine Irco Breuning Simag 42.1 for rods max. 3200mm, incl. many tool holders also driven (list can be requested), please contact me if you are interested or have any questions.
Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz /Power 50 Hz 5,5 kW Schallpegel 50 Hz / Noise Level 50 Hz 76…77 dB(A) Gewicht / Weight +/- 95kgs
Key data: 32 mm, 850 mm
Radial drilling machine Manufacturer: Danube Type DR32 Drilling capacity: Maximum 32 mm in steel. Tool holder: MK 4 (Morse taper). Speed range: Approx. 41 to 1,800 rpm Quill stroke: 190 mm to 200 mm. Projection: Flexibly adjustable from approx. 240 mm to 850 mm Table size: 1,200 x 600 mm Typical functions Tapping device: Integrated automatic for cutting threads (e.g. up to M26 in steel). Feeds: Automatic quill feed in several stages Coolant device: Integrated pump and coolant trough directly on the work table. Machine is in a used condition, clamping Z axis makes noises when driving up and down. Otherwise the machine is ok.
Big lot of spare parts for an Andritz Decanter Centrifuge. Large stock of original ANDRITZ decanter centrifuge spare and replacement parts, mainly new and unused old stock. The lot includes a wide range of stainless-steel shafts, rotating components, flanges, bearing housings, covers, seals, rings, bushes, fasteners and other mechanical parts. Many components are supplied in their original ANDRITZ packaging with identification labels and part numbers. Several precision-machined components are manufactured from stainless steel, including parts marked AISI 316. SKF bearings and other branded components are also included. Ideal for ANDRITZ decanter owners, service companies and maintenance departments requiring genuine or hard-to-source spare parts., Type of Machine: Spare parts decanters, Weight: 670 kg, Dimensions: 120 x 80 x 150 cm
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1750; Engine: Deutz TCD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 125A, 63A, 32A, 16A, Sockets: (230V) 4x 16A; Water Tank Volume [l]: 250
DYNAJET 350th & 500th – Available for Immediate Delivery DYNAJET 350th and DYNAJET 500th hot-water high-pressure units currently available from stock. We can offer both brand-new machines and pre-owned units, depending on your requirements and budget. • DYNAJET 350th • DYNAJET 500th • Hot-water high-pressure technology • Professional and industrial applications • Available from stock • Immediate delivery Please contact us for further information, technical details, pricing and current availability.
2 pieces dough divider RHEON, type: Twin DIvider 400 VX 202 incl. lifting tipper BMTEC Dough-friendly division from rye dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - 2 pieces of machines + lifting device from BMTEC - Condition: Good, ready to use Visits and test runs are possible by arrangement.
The depalletizer separates pallets, multi-layer containers (e.g. blown bottles / bottle blanks) into a transport container up to the next connected machine. Capacity: 13,000 b/h Control: Siemens Connection: 3x400 V, N, 50 Hz Protection class: IP 54 Power (electr.): 27 kW Current: 49 A Condition: well-maintained, fully functional Availability: from week 43 2026
Overview This KOSME DEPACK B B1F A/67-Rf is a depalletizer for empty containers such as blown bottles, built in 2013. It takes containers delivered in several layers on pallets, removes them layer by layer and transfers them to the downstream machine in the line. It handles containers from 100 to 500 ml at up to 13,000 containers per hour. Full pallets run in on pallet chain conveyors, a gantry-type depalletizing head clears the layers and removes the tier sheets. The machine is enclosed by safety fencing with light curtains and access protection. It is controlled by a Siemens PLC from a separate control cabinet outside the machine and operated from a KOSME touch panel. The machine is format-dependent, with several formats set up. Technical data Manufacturer: KOSME Model: DEPACK B B1F A/67-Rf Year of manufacture: 2013 Machine type: depalletizer for empty containers Output: up to 13,000 c ...
Six identical Rodenstock DNEye Scanner 2+ units are available, five of them available from January 2027, printer: black-and-white printer, screen type: TFT LCD touchscreen, screen size: 10in, WSVGA, 1024x600pixels, spherical measurement range: -20dpt to +20dpt at 12mm vertex distance, cylinder range: 0-8dpt, axis: 0-180°, pupil measurement range: 2-7mm, 3 zones, number of measurement points: 1,400points at 7mm pupil, measurement method: Shack-Hartmann, number of rings: 24, number of measurement points: 6,144, number of analyzed points: 100,000, diopter range: 37.5-56dpt, reproducibility: 0.03mm, method: Placido disc/keratoscope, measurement wavelength: 455nm, no UV light, measurement range: 150-1300µm, precision:
The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.; Gross weight [kg]: 889; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE50GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103
Excellent condition. Manufactured 2022/2023. Fully functioning, taken from closed down bakery. Pastaline P40EL divider Pastaline Kali rounder Combination stand
Key data: 27 mm, 36 , 1200 U/min
Warehouse – No. 2875 1 used, in 2026 Partially overhauled and function-tested compounding granulation line, consisting of: Brabender grav. Dosage 2-components (expandable, optional vs. surcharge) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 control stand-alone Extruder Twin Screw Leistritz Type ZSE 27 HP Synchronous, seal-combing, segmental screw and barrel with intensive cooling. Screws 2x Ø 27 mm- 36 L/D with 8 cylinder zones with 3x degassing zones, 1x vacuum pump 1.5 kW Screw speed up to 1,200 rpm.-1 – adjustable Extruder drive 33.8 kW - Heating capacity 9.8 kW installed Mass pressure sensor Control Macromatex III MAAG Gala Underwater Pelletizer Type LPU Model SLC 5, incl. Polymer start-up valve with hydraulics Perforated plate 20°, granulator SLC 5 with drive 1.5 kW Water Box - Temperate water system with Granule Centrifugal Dryer Type 1150, Driv ...
Die casting machine Frech DAW 80F RC, built in 2003,
Die casting machine Frech DAW 125 S DV, built in 1999,
Offer 26188 Technical data: - Brush diameter up to approx. 120 mm - Brush width up to approx. 90 mm - Shaft mount 20 mm each - Manual height adjustment of the top brush by handwheel - Drive per motor 400 V / 2.5 kW - Space requirement approx. W 650 x H 1150 x D 450 mm - Weight approx. 80 kg
Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.
2016 Mettler-Toledo Garvens CM 3570 DMS metal detector and checkweigher – used, Combined metal detection and checkweighing system for food processing., This Mettler-Toledo Garvens CM 3570 DMS combines metal detection and checkweighing in a single unit. Products first pass through the metal detector, fitted with the familiar Profile system, before being weighed on the conveyor belt, with the weighing unit rated for a maximum of 750 grams at an accuracy of 0.1 gram. Products rejected for metal contamination or incorrect weight are automatically removed from the line. Operation runs through the colour touchscreen control panel on the housing, with adjustable product profiles for quick changeovers between items. The machine was built in 2016 and is finished in stainless steel with a clear plastic guard around the conveyor belt., Located in Emmeloord, the Netherlands. Available immediately ...
Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table, welding fixture, circumferential seam welding machine -Manufacturer: Carl Cloos, Welding rotary device type CD 100 SR -Turning length: 1030 mm -Turntable: Ø 500 mm, tiltable -Peak height: 375 mm -Speed: electrically continuously variable 0-3.5 rpm -Control: via foot pedal -Burner stand: manually adjustable -Tailstock: with pneumatically operated quill, 90 mm stroke -Transport dimensions: 2025/800/H1350 mm -Weight: 400 kg
Key data: 1250 mm, 250 mm
used Dräco Collagen Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Belt width 1250 mm Coil weight load capacity 1500 kg Color: Blue Weight 110 kg Dimensions 1550 x 750 x 1000 mm Coil inner diameter (min.) 250 - 515 mm Coil outer diameter (max.) 1100 mm
Places cups into your packs automatically, This machine by Steven BV of Joure (NL) was built to place small cups, for example with sauce or dressing, into packs automatically. Cups come from the supply bin at the top and are guided down through the chutes. The frame stands on castors and its height is set with a handwheel, so it can be positioned over an existing conveyor., The rating plate shows it was built in July 2016, machine number 16016, supply 400 V., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/steven-bv-cup-dosing-machine/, Type: Cup dosing machine, Power supply: 400 V, Controls: Mitsubishi touchscreen, Dutch menus, Construction: Stainless steel frame on castors, height adjustable with handwheel
maximum number of results exceeded
please refine your search
