doosan d used for sale

Manufacturer: Polar Model: DCM DCC-M Type: Die Cutter with Counter Pressure Year of Manufacture: 2010 Feeding: Hand feeding per stack Delivery: Inline banding system Technical Specifications - Minimum format for die cutting: 50 x 50 mm - Maximum format for die cutting: 170 x 250 mm - Minimum format after die cutting: 46 x 46 mm - Maximum format after die cutting: 166 x 246 mm - Minimum pile height: 35 mm - Maximum pile height: 120 mm - Minimum height of punch knife: 65 mm - Maximum height of punch knife: 145 mm - Maximum power of die cutting: 50 kN - Minimum power of die cutting: 7 kN - Maximum capacity depending on material: 8 measures per minute - Compressed air demand: 670 l/min Find more here - .ucymachines/ Contact us at - sales@ucymachines

Spiral mixer DIOSNA, type: SP 120 D -completely overhauled- - for 120 kg of dough and 75 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 digital time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - Condition: Very good, as good as new, ready for use immediately - 6 months warranty The spiral mixer has been completely overhauled and is in very good condition. Inspection and test run are possible by arrangement.

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spind ...

Syringe Dispenser Diluter HAMILTON MICROLAB 715-DIL 600 Series recent equipment that was used in demonstration only. ML635-BZ Unit With ML700 Advanced Controller Accuracy: ±1% Dimensions (WxDxH): 177.8 x 139.7 x 266.7 mm Power supply frequency: 50/60 Hz Max. voltage240 V No. of syringes ; 2 Weight 5.9 kg

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

240V, 50HZ, 0.75KW, 2.8A, 1420RPM FACTORY F40

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW8CNSWH75X753 -Pmax: 350 bar -Number: 1x valve available -Dimensions: 237/46/H70 mm -Weight: 2.1 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW8CNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 290/65/H100 mm -Weight: 2.3 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D41VW 34 C 4 NJW 75 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 240/95/H185 mm -Weight: 10.8 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW8FNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Dimensions: 165/45/H70 mm -Weight: 2.3 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 165/48/H70 mm -Weight: 1.6 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW14FNSWH75X753 -Pmax: 350 bar -Quantity: 1x valve available -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

CONTROLS   conventional WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 150 mm   material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1   spindle revolutions (max): 610 /min GRINDING SPINDLE 2   spindle revolutions (max): 610 /min COMPONENT-FEEDER   Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS   space requirements -left/right-: 5230 mm   space requirements -front/back-: 4460 mm   total height: 3600 mm   total weight approx.: 11000 kg Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

Tube film width: 60-215mm, film thickness: 0.06-0.12mm, max. tube film roll diameter: 300mm, film core diameter: 76mm, bag length: 60-600mm, output at bag length 100mm and film thickness 0.06mm: 15 pcs/min, print image dimensions: 300x213mm, print length: max. 300mm, optional print length: up to 600mm, table dimensions: 880x460/600mm, table height: 850mm, connected load: 2.3kW, fuse protection: 10A, supply pressure: 6bar, rel. humidity: 25%-85%, noise emission: 75dB(A), length: 1200mm, width: 1200mm, height: 1550mm, weight: 250kg, with documentation. An on-site inspection is possible.

Rack Trolley for Daub Thermo Roll 86x85cm - Rack trolley for Thermo Roll oven - Extra deep rack trolley - with 10 pads

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

On offer is a flour storage and dosing system from professional bakery production, used. It is an interconnected industrial plant for the storage, dosing and weighing of flour. The plant is designed as a functional system and is suitable for bakeries, food production and industrial dough production. Extensive documentation available (including manufacturer's documentation, explosion protection documentation). Plant components: - 3 flour silos (REIMELT/ Daxner) outdoor area, metal version) - 2 REIMELT flour dosing and weighing systems - Hoppers, dosing devices, discharge units - Pneumatics, pipes, valve technology - Weighing units and controls Modernization: Extensive technical overhaul and investment in the plant (piping, components, etc.). The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. A viewing is expressly recom ...

BIG Adapter Genie/Terex on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable hitch, - Net weight approx. 190 kg

Paper drill Dürselen Corta PB 04 N; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke adjustable; max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drill belt; Optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; endless drill band.

Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.

used Dräco coil carriage, smooth-running spindle, optimal tension, very easy to drive Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Belt width :1000 mm Coil weight load capacity: 1000 kg Colour: blue Weight: 110 kg Dimensions: 1300 x 750 x 1000 mm Coil inner diameter (min.): 250 mm Coil inner diameter (max.): 515 mm Coil outer diameter (max.): 1100 mm Coil width (min.): 1000 mm Clamping range :280 - 510 mm

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

Water Dosing Unit, Deltamatic, Type D 60 - 80

Rheon Free divider

A refrigeration system / drinking water storage tank from the companies DK-Kälteanlagen / Daxner is offered Technical data: Manufacturer: DK-Kälteanlagen GmbH Emsdetten/ Daxner Model/ Type: KWE 950 with Aggr. SIL AGD 4590 ZTZ Year of Make: 2022 Capacity: 950 ltr. Max. operating overpressure: 6 bar Max. operating temperature: 95 degrees C Standards: DIN 4753, DIN 1988 Refrigerant: R 449A Corrosion protection: Two-layer enamelling The device is part of a complete sourdough plant, which is offered in a separate advertisement. It is currently with our customer in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, w ...

Key data: 333 KW, 1500 1/min

Was used as a power generator. The generator broke, the customer bought a new one! Built in 2015. Hours : 4600 Normal state No sardines ! More pictures by mail.

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Key data: 57900 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Automatic dough divider and rounder Fortuna Automat A3-30 is a reliable and efficient solution for fast and precise dividing and rounding of dough. This machine processes up to 30 dough pieces per cycle, significantly improving production efficiency and ensuring consistent results. The dough weight range of 32 to 70 g allows flexibility for various bakery products. The machine is equipped with three plates and an automatic head tilting function, making operation easier and increasing productivity. Robust construction and high-quality manufacturing ensure stable operation, long service life and easy maintenance, making this machine ideal for professional use. Technical specifications: Manufacturer: Fortuna Model: Automat A3-30 Machine type: Automatic dough divider and rounder Capacity: 30 pieces per cycle Dough weight range: 32 – 70 g Number of plates: 3 Functions: Automatic h ...

Key data: 4000 KW, 11000 V

Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

Very clean and brand-new 110 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 110 kVA Prime power: 100 kVA Frequency: 50 Hz Voltage: 400/230V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Large integrated fuel tank New condition Year of manufacture: 2025 Applications: Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supply ...

Very clean and brand-new 170 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 170 kVA Prime power: 155 kVA Frequency: 50 Hz Voltage: 400/231V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Integrated fuel tank – 380L New condition Year of manufacture: 2026 Applications Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supp ...

ACME 8 Dough Sheeter Model 8 115V Includes: 9' and 12" Plates, Light and Heavy Moulding Chains Full Refurbished All New: Bearings, Belt, Drive Belt, Idler Gears, Molding Rails, Paint

The Rondo SSO 617 reversible dough sheeter is a high-quality commercial kitchen equipment designed for rolling and cutting dough in a professional setting. This durable and reliable machine from the trusted brand Rondo is specifically built for restaurant and food service establishments, making it a valuable addition to any baking and dough equipment collection.

Cleaned and tested, it has new belts and new scrapers overall in perfect condition.

The AM Manufacturing S300 Scale-O-Matic Combination Dough Divider Rounder is a commercial kitchen equipment designed for baking and dough preparation. This electric floor model, made in the United States by AM Manufacturing, combines dough dividing and rounding capabilities in a single machine. Perfect for restaurants and food service establishments, this product efficiently helps in creating consistent and precise dough portions for various baking needs. Comes complete and in great condition.

A Haffner double mitre saw with robust construction is available. Saw units: 2, indexing positions: 90°/45°/22.5°, unit inclination: 45°, saw blade diameter: 330mm, motor power: 1.1kW, max. cutting length: 3000mm, max. cutting width: 130mm, max. cutting height: 120mm. An on-site inspection is possible.

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

0.5 KW 380 V 16 A Discs D 200 mm Swivelling sanding pads Length 0.30 m Width 0.78 m Height 1.10 m Weight 40 kg Color: Green

1.2 HP 0.9 KW 380 V 16 A 2900 rpm Discs D 200 mm Swivelling sanding pads Coolant Setup Length 0.52 m Width 0.90 m Height 1.20 m Color: Green Weight 50 kg

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva -new/148, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

The drying/conveying system for plastics - Piovan DP615 The drying/conveying system for plastics with 2 molecular sieves, 3 silos Warm air generator with a doubled molecular sieve Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Silos are hermetically insulated, with a capacity of 150 liters, with their own control system Silos can work separately and independently with different materials and temperatures. Silos have a heating and temperature maintenance function 3x Piovan Easy3 vacuum conveyors

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

Display Diane PP450.0571-K01 | Jenbacher original 541065 - NEW OPTIONAL ITEM: Interface card 3IF779.9 B&R -Jenbacher original 442076 - NEW = 740,00 €