134,074 used machines on RESALE, but how to find them? Machine Search
New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!
turning diameter: 376 mm turning length: 760 mm control: FANUC I-Series Plus greates pass round over bed: 780 mm swing diameter over slide rest: 630 mm max. turning diameter: 376 mm spindle turning speed range: 4000 U/min spindle drive motor: 22 / 15 kW spindle nose: ASA A2-8 spindle bore: 81 mm bar material dia.: 76 mm c-axis: 0,001 ° chucking diameter: 255 mm Number of tools: 12 St. travel -x axis: 260 (72 + 188 ) mm travel -z axis: 830 mm travel -y axis: 105 (+/- 52,5) mm diameter of quill: 100 mm quill stroke: 100 mm tailstock taper MT: MT 5 total power requirement: 41,98 kVA weight of the machine ca.: 6,1 t dimensions of the machine ca.: 4,0 x 2,5 x 2,2 m CNC control FFANUC I-Series Plus - chip conveyor - driventools 5000U/min, 7,5kW - C-axis - hydraulic unit - tailstock - coolant 7 bar - bar loader interface Capto C3 straight chair: 2 Capto C3 90° chair: 1 ER20 Capto chuck: 10 ER ...
x-travel: 2100 mm y-travel: 1500 mm z-travel: 1500 mm Number of pallets: 2 size of pallet: 1250 x 1250 mm dimension of workpiece: 2000 x 1725 (H) mm feeds: 0,1 - 12000 mm/min rapid traverse: 24000 mm/min spindle motor: 26/22 kW spindle turning speed range: 10 - 6000 U/min Tool magazine positions: 60 fach tool taper: BT 50 control: Fanuc 31i-MB workpiece weight: 3000 kg total power requirement: 69 KVA total wight: 29 t dimensions of the machine ca.: 10,5 x 5,8 x 4,1 m - CNC control FANUC 31i-MB 4-Axis (X,Y,Z,B) - 2 pallets 1250mm - chip conveyor - High pressure through spindle coolant (Hydtec) - ATC 60 tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1100 mm y-travel: 650 mm z-travel: 550 mm Control: Fanuc 31i-MB distance spindle nose and table: 150 - 700 mm Main spindle:: turning speed range - main spindle: 10 - 20000 min/-1 power capacity - main spindel: 22 / 11 kW max. Torque: Nm tool taper: BT 40 work table:: table surface area: 1200 x 650 mm max. table load: 800 kg Tool-Presetter:: number of toolpositions: 30 pos. tool taper: BT 40 feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1500 mm/min total power requirement: 48,55 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,65 x 3,30 m CNC Machining Center Vertical - CNC control Fanuc 31i-MB - ATC 30-fold (BT 40) - Chip Conveyor - Tool Measure - Mold Optio n - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hours in picture Find more here - .ucymachines/ Contact us at - sales@ucymachines
Key data: 320 mm, 305 mm, 5000 1/min
FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder
DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)
This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details.
- Doosan natural gas/biomethane CHP 250 kW -Gas pressure control system - ORCAN Low Temperature ORC 15 kW Net - Heat meters - EEG 2012-8 years remaining term - Installed in concrete sound hood - with workshop room - 800 kVA compact transformer station 20/0.4 kV - Fiber optic connection - Camera system (10 cameras+recorder) - Grounds approx. 500 sqm fenced
This 3-axis DOOSAN VC 3600 was manufactured in 2018. It features an X-axis travel of 520 mm, Y-axis travel of 360 mm, and Z-axis travel of 465 mm. The machine includes a table size of 650 × 375 mm and a load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 3600 vertical machining centre we have for sale. Contact us for further details.
This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine.
The machine is in good technical condition, testing is possible after prior agreement. The machine is offered without a divider.
This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details.
control: FANUC Series 31i Model 5 turning diameter: 540 mm turning length: 1040 mm c-axis: indexing: 0.001 ° turning speeds: -5000 U/min tool taper: ASA A2-6 Top turret tool hodler:: 12 y-travel: 170 (+/- 85) mm rapid traverse X-axis: 36 / 24 m/min rapid traverse Z-axis: 36 / 26 m/min Overall size: 8000 x 3000 x 3000 mm weight of the machine ca.: 12000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details.
x-travel: 1050 mm y-travel: 570 mm z-travel: 510 mm Control: Siemens 828D Main spindle:: turning speed range - main spindle: 12000 min/-1 power capacity - main spindel: 16,5 / 11 kW max. Torque: 141 Nm tool taper: BT 40 distance spindle /table: 150 - 775 mm work table:: table surface area: 1300 x 570 mm max. table load: 1000 kg tool magazin:: number of toolpositions: 40 pos. tool taper: BT 40 max. tool diameter: 80 mm max. tool length: 300 mm max. tool weight: 8,0 kg change-time tool to tool: 1,2 sec change-time chip to chip: 3,2 sec feeds:: rapid traverse ( X / Y / Z ): 36 / 36 / 30 m/min workpiece height max.: 590 mm total power requirement: 40,9 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,5 x 3,1 x 2,98 m 3-axis vertical CNC machining center - Siemens 828D CNC control and workshop-oriented programming support Shop Mill - 40-tool tool changer (BT 40) - Bas ...
This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details.
turning diameter: 420 mm turning length: 1350 mm spindle passage: 101 mm control: Siemens SL 828D ShopTurn number of controlled axis: 4 turning speed range: 3000 U/min power requirement: 22/18,5 kW rapid speed: 30 m/min number of tapers in turret head: 12/24 BMT 65 number of driven tools in turret: 12 BMT 65 Spindel speed of driven tools: 5000 U/min Spindelpower on driven tool: 7,5/5,5 kW y-axis: +/- 65 mm tail stock: MT-5 weight: 8,0 t dimensions: 5,7 x 2,3 x 2,32 m Heavy CNC- lathe with driven tools and Y- Axis in very good condition. First instalation: 03/2023 Appr. 5400 h Power on. - 2x 3-jaw chuck Ø 325 + 400 mm - some fixed tool holders - Tool pre- setter - chip conveyor - 4x driven tool holders - 2 + 2 driven toolholders with Capto C4 - oildust collector - band filter system with appr. 1000 ltr. - hydr. steady moveable wit turret SMW Autoblock SLU-X3.1 (Ø 20- 165 mm) - 3 colour ...
control: FANUC 21i TB turning diameter: 355 mm turning length: 1330 mm c-axis: indexing: 0.001 ° turning speeds: -2800 U/min tool taper: BMT 65 Top turret tool hodler:: 12 rapid traverse X-axis: 16 m/min rapid traverse Z-axis: 24 m/min Overall size: 4000 x 2000 x 2100 mm weight of the machine ca.: 6700 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 4-axis DOOSAN NHP6300 was manufactured in 2014. It features an impressive X-axis travel of 1,050 mm, Y-axis travel of 900 mm, and Z-axis travel of 1,000 mm. The machine includes a maximum pallet load of 1,500 kg and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP6300 horizontal machining centre we have for sale. Contact us for further details.
The machine is in good technical condition; testing is possible by prior arrangement. 400 operating hours; condition comparable to a new machine. The lathe comes with accessories and is ready for immediate operation. Equipment: driven tools, chip conveyor, 20-bar high-pressure pump, 250mm hydraulic chuck, 12-station turret, modern FANUC i-Series CNC control, sets of soft jaws, bar feeder, regular maintenance history, and documentation.
- Tool eye - SMW 3 chuck 630-165 mm - SMW Steady rest 85 - 350 mm - LNS Chip conveyor - DORMATEC Air Filter 30 m3
CNC lathe Type: LYNX 220 C Manufacturer: Doosan Year: 2008 Control: Fanuc Hours: 17100 Spindle overhaul in 2025 Max. turning diameter: 320 mm Max. turning length: 305 mm Swing diameter over bed: 510 mm Swing diameter over slide: 290 mm X: 175 mm Z: 330 mm Spindle speed: 4000 rpm Spindle passage: 76 mm Bar capacity: 65 mm Turret: 12 positions Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines
CONTROLS CNC controls FANUC 31I MODEL A BASIC FUNCTIONS number of spindles: 2 number of turrets: 2 live positions: yes number of c-axes: 2 number of y-axes: 1 WORKING RANGE TURNING turning diameter (max): 230 mm worpiece length max.: 700 mm MAIN SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 5000 /min c-axis: yes COUNTER SPINDLE spindle revolutions (min): 50 /min spindle revolutions (max): 6000 /min c-axis: yes X/Z SLIDE tool fixture: Turret ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2800 mm space requirements -front/back-: 1630 mm total height: 2200 mm total weight approx.: 9000 kg ATTACHMENTS (TURNING) chip conveyor: yes coolant unit: yes band filtration unit: yes coolant through ...
This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details.
The machine is in good technical condition; testing is possible by prior arrangement. Max. turning diameter: 350 mm. Max. turning length: 500 mm. Max. bar turning diameter: 79 mm. Max. spindle speed: 3,500 rpm. Chuck size: 10″ (254 mm). Spindle motor power: 18.5 kW. Additional equipment: 1x Morse taper 2 adapter, 1x Morse taper 3 adapter.
control: FANUC 21i-TB Control x-axis: 390 mm z-axis: 780 mm spindle taper: A2-11 number of spindle speeds: 2000rpm engine output: 37 kW weight of the machine ca.: 9000 kg dimensions of the machine ca.: 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: DOOSAN Model: PUMA GT 3100 M Year: 2023 Condition: Used Stock number: 9431 Control system: FANUC i-Series Maximum turning length: 725 mm Maximum turning diameter: 376 mm Maximum turning diameter over bed: 720 mm Maximum turning diameter over support: 590 mm X-axis travel: 260 mm Z-axis travel: 830 mm C-axis travel: 360 Maximum spindle speed: 2800 1/min Maximum workpiece weight: 1000 kg Number of all tools: 12 pieces Number of driven tools in the turret: 12 pieces Number of axes: 3 pieces Max. rod diameter: 102 mm Weight: 5650 kg Equipment: Powered tools Baking (2 pieces) Suction
Manufacturer: DOOSAN Model: DNM 400 A Year: 2011 Condition: Used Stock number: 9438 Control system: FANUC Work table length: 920 mm Work table width: 435 mm Maximum table load (uniform): 600 kg Maximum vertical spindle speed: 12000 1/min X-axis travel: 762 mm Y-axis travel: 435 mm Travel Z-axis: 510 mm Machine height: 2509 mm Machine length: 2093 mm Machine width: 1962 mm Machine weight: 5000 kg
Manufacturer: DOOSAN Model: PUMA 2600 Year: 2012 Condition: Used Stock number: 9439 Control system: FANUC Maximum turning length: 1245 mm Max. turning diameter: 376 mm Maximum spindle speed: 2800 1/min Weight: 5400 kg
CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines
turning diameter: 310 mm turning length: 450 mm control: Fanuc O-TC total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Fanuc O-TC 12-fold revolver (VDI30) 3-jaw chuck main spindle 3-jaw chuck sub spindle chip conveyor tool measuring device coolant device Technische Daten / technical details: Umlaufdurchmesser über Bett / rotary diameter over bed 500 mm Umlaufdurchmesser über Planschlitten / rotary diameter over sledge 310 mm max. Drehdurchmesser / max. turning diameter 310 mm max. Drehlänge / max. turning lenght 450 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 450 mm Drehzahl / spindle speed 4500 UpM /rpm Werkzeugrevolver / turret head 12 fach /holes Stangendurchlass Hauptspindel / bar diameter main spindle 50 mm Eilgang X / rapid feed X 24 m/min Eilgang Z / rapid feed Z 30 m/min. Antriebsleistung Hauptspindel / d ...
DOOSAN MX2100ST turning center, year 2022, equipped with FANUC 31i-B5 control. This multi-tasking lathe offers X1/Z1 travels of 565/1,050 mm, Y-axis ±85 mm, and B-axis indexing. Main and counter spindle each deliver 22/18.5 kW at 5,000 rpm with A2-6 nose and 8 chuck; 76 mm spindle bore accommodates bar stock up to ø65 mm. BMT55P turret with 12 driven tool positions (5,000 rpm) plus 80-station Capto C6 ATC with 12,000 rpm milling spindle (18.5/15/11 kW) and 2.0 s tool change. Single Swiss owner; delivered complete with LNS Sprint 565 S2 bar feeder (3.2 m, ø3â€34 mm), 55-bar high-pressure coolant to milling spindle, electric tool-measuring arm, parts catcher, oil-mist extraction and HAINBUCH TOPlus/Mando workholding.
Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 310 mm, 450 mm, 4500 1/min
Stock No.: 4034 CNC LATHE Manufacturer: DOOSAN, Type: S-310 Serial No.: TLNE-1094, Year of manufacture: 2000 Specifications: Max. circumferential diameter 310 mm dia. Max. turn. About bed 500 mm Dia. Turning length 450 mm Main motor power 9/11 kw Main spindle speed range 45-4500 rpm Hole through drawing tube 65 mm dia. X axis movement 200 mm Z ash movement 450 mm Tool turret with 12 VDI 30 stations Total power consumption 36 kva Control Fanuc 18-T Accessories: Hydr. Chuck Main Spindle Kitagava HS-10 - 250 Various tool holders. Chip conveyance. Cooling water system. Dimensions: Length: 3350 mm, Height: 1900 mm, Width: 1800 mm, Weight: 3200 kg
General Manufacturer: Doosan Type: Lynx 2100LMSA Year of manufacture: 2018 Control: Fanuc iSeries Travel: X 205 mm Z 560 mm Rapid traverse X/Z: 30/36 m/min Capacity Turning diameter: max. 300 mm Turning length: max 510 mm Main spindle Spindle speed: 6,000 rpm Spindle power: 15 kW Spindle Torque: 127 Nm Revolver Number of tools: 12 Dimensions and weight Dimensions: L 2,805 mm x H 1,693 mm x W 1,595 mm Weight: approx. 3,600 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Boss 552 32 L Bar Feeder, Year 2018 Sub-spindle AGW Tool holder BMT45 Parts catcher
General Manufacturer: Doosan Type: Puma 2100MS Year of Make: 2011 Control: Fanuc iSeries Travel: X 260 mm Z 590 mm Rapid traverse X/Z: 30 m/min Capacity Turning diameter: max. 406 mm Turning length: max. 520 mm Main spindle Spindle speed: 4,500 rpm Spindle power: 7.5 kW Revolver Number of tools: 12 Dimensions and weight Dimensions: L 3,415 mm x H 1,900 mm x W 1,863 mm Weight: approx. 5,560 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Iemca Master 80 HF 33 L Bar Feeder, Year 2011 Sub-spindle AGW Tool holder BMT45 Parts catcher
travel -x axis: 1.630 mm travel -y axis: 762 mm travel -z axis: 650 mm control: FANUC 0I-MD Spindle speed: 12.000 min -1 weight of the machine ca.: 13 t Milling machining centers - vertical | DOOSAN - DNM 750 equipped with 30-way tool changer, ITC (20 bar) and chip conveyor. The machine only has 13.686 spindle hours. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM750 | DNM-750 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC bar-fed lathe, year 2010, CNC 18i - TB. Used machine in good condition. More info & price on IndustrialBuyer.
CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2014 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. Control: FANUC Series 31i Model A Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6 chuck Speed up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° Milling spindle: Capto C5 interface Speed up to 12,000 rpm Chain magazine for milling spindle: 40 positions for Capto C5 tools Revolver: 16 tool positions Bar feeder Belt conveyor for finished parts workpieces. Tool holders Machine in good condition, fully functional. Find more here - .ucymachines/ Contact us at - sales@ucymachines
twin-spindle chucking lathe, year 1999, CNC 18-T. Used machine in good condition. More info & price on IndustrialBuyer.
Manufacturer: DOOSAN Model: PUMA MX 1600 ST Year: 2014 Condition: Used Stock number: 9512 Control system: FANUC Maximum turning length: 899 mm Max. turning diameter: 330 mm Maximum turning diameter over bed: 680 mm Maximum main spindle power: 15 kW Maximum spindle speed: 6000 1/min Weight: 11500 kg Equipment: Tool Holder Bar Feeder Strip workpiece remover Grips 2x universal chuck
Engine Brand: Poyaud Diesel, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 2001 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 441 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 220/380 , Generator Amps: 1375/760 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/poyaud-diesel-b6l85-generator- 500kva-used/42331, , = More information =, , Empty weight: 5.000 kg, Type number: B6L85 GENERATOR 500KVA
Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de
Motor in exchange DEUTZ Type= BF4M1013E in KHD-AT scope of delivery with warranty immediately available from stock. info@miw-zeven.de
We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de
NEW diesel engine Scania Dc13-72A incl. Starter to exchange give old Scania engine DC12 Power: 1500/1800 326/372 kW MIW GmbH Motoren-Instandsetzungs-Werk North-West-ring 8 D-27404 Zeven/Germany Tel:0049(0)4281 950583 Fax:0049(0)4281-950585
maximum number of results exceeded
please refine your search
