doosan d used for sale

Intergas dosing unit DSD 500, type A, foaming unit and gas dosing station At the moment we have an intergas dosing unit for sale. This was a part of a project. Therefore the machine was used only very limited. - Operating hours: well below 100h - Weight: approx. 500kg Find more here - /

Drais Dissolver for sale. Manufacturer: Drais Model: RSV 40-3/VAAS Year: 1981 In the photos are also two containers that are included in the scope of delivery. Find more here - / Contact us at -

2x Wood drying chamber dry chamber energy saving system 606 economy It is run until 2018. The heating system can be purchased in addition - wood chips with 400 KW heating capacity and boiler , etc. - Same year of construction. The solar system/panels on top can also be purchased. Find more here - / Contact us at -

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious PRIENAI is new SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT Basic descriptions: Overall Length – 12,9 m. Moulded Breadt ...

Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious ALYTUS was operated for up to 400 hours – (Registered in the Lithuanian register) SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIP ...

Dissolving station for copper cyanide The dosing system was designed according to drawing no. A10690 for the preparation of calcium cyanide and copper cyanide solution. The tank has a volume of approx. 1170 litres and is filled with water via an angle seat valve and with beads/scales/flakes via a feed screw. The dilution water is filled via a solenoid valve and a downstream angle-seat valve for volume adjustment. A spray nozzle in the aeration and deaeration dome prevents vapours from escaping when filling the tank. The water supply is shut off by a ball valve and the flow rate is adjusted by an angle seat valve. The extraction is switched on or off via the control unit. The feed screw first conveys the dry material into a two-stage shredder. From there, the dry material enters the container. The quantity of dry material conveyed is regulated via a slide valve on the feed screw. A su ...

; Gross weight [kg]: 803; Engine: Perkins 404D-22TG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 13396; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

; Gross weight [kg]: 16583; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

; Gross weight [kg]: 12692; Engine: Cummins KTA50-G23; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

; Gross weight [kg]: 9613; Engine: Cummins KTA50-G3; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger

; Gross weight [kg]: 1500; Engine: Kohler KDI2504TCRCAC-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 250

; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250

; Gross weight [kg]: 1550; Engine: Deutz TD2.9L4-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : Coolant heater and battery charger; Water Tank Volume [l]: 250

; Gross weight [kg]: 670; Engine: Battery System: LiFePO4; Accessories: Battery, Control Panel, AC output sockets: 2x 32A (1 for parallel), AC Input sockets: 1x 15kW, DC input: 1x 30kW

Dividing head DECKEL Center height 90 mm Spindle Passage in Pull Tube 25 mm Gear ratio 40 : 1 Weight approx. 41 kg

Standard equipment: Tapping device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP push button Thermal overload protection Spindle stop Drilling protection with electr. Hedge Connection cable with Schuko plug 3-year warranty for single-shift operation Continuous/normal drilling capacity (mm) 6/8 (in E335/ST60) Tapping capacity (pitch dependent) M5 Spindle B12 Drilling depth (mm) 60 Projection (mm) 220 Column diameter (mm) 70 Usable work surface (W x L) (mm) 300 x 250 T-slot size (arm), spacing (mm), dimension width (mm) Cross grooves, number 2, 14/26 Drill head height adjustment by hand Feed (mm/revolution) by hand Drilling depth stop ring (positive fit) Drilling depth indicator digi ...

PART NUMBER: 7540 Specifications: - max disc diameter 350mm - spindle diameter 30mm - up/down adjustable dial - electric brake - shield guard - max cutting height for the blade 350mm - 100mm - min saw spacing 250mm - max saw blade spacing (edge saw blade spacing) 2500mm - max cutting length 2170mm - electric saw spacing - with a scorer - max scorer disc 130mm - spindle diameter 20mm - power of the scoring motors 2×0.75kW - main motor power 2x4kW - bottom bracket motor power 0.37kW - 2 types of rotation speed 3000,4500 rpm - extraction spigot diameter 2x120mm, 2x80mm - total dimensions length/width/height 4500x3000x1600mm - weight about 1100kg Advantages: – Polish production – electric saw spacing – DTR documentation – very good condition – used double saw Net price: 32900 PLN Net price: 7651 EUR depending on the price 4.30 EUR (Prices ...

Caterpillar 3412 - Used - 900 kVa - 2WJ

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Spindle bore87 mmDiametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWMain drive 1Drive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range25 - 5000 rpmAccuracy at point stopping0,01 degreeFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive s ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose220h5 mmSpindle diametre on front bearing160 mmSpindle bore102 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)580 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (40% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the a ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmWeight approx.3000 KgDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

General2-Axes Universal Turning Center with driven tools, C-axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmBar diametre80 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (40% DC)25,5 kWDrive power (100% DC)17 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,26 x 2,44 x 1,95 (4,5 x 2,44 x 1,95) mWeight approx.6300 KgDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable data exchange  ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

RACK (CPU-1 / CPU-P) RS-12470974

AKR-KNOCK CONTROL RS - 12404594

AKR-KNOCK CONTROL RS - 12473957

AKR-KNOCK CONTROL RS - 12473965

SERV-SPEED GOVERNOR RS - 12404590

I/O PRINTED BOARD RS - 12404593

SERV-SPEED GOVERNOR RS - 12511709

SPEED GOVERNOR RS - 12470911

SPEED GOVERNOR RS - 12470916

SPEED GOVERNOR RS - 12470914

STEP-TRIGGERING CARD RS - 12404591

ID3763 Sandvik Pantera DP1100i Year of construction 2014 approx. 11.060 hours/hours Blasting hole drill rig, with rod changer, cab with safety grille, radio, roller blinds for cab windows, TIMi – rig alignment instrument, hydraulic tail supports, central lubrication system, all servicing carried out by Sandvik, good condition, the last hammer service was carried out 300 operating hours ago & the last safety inspection in January 2026. Blast hole drilling rig, with rod changer, cab with protective grille, radio, roller blinds for cabin windows, TIMi – carriage alignment instrument, hydr. Bottom supports at the rear, central lubrication system, all service done by Sandvik, good condition, the last hammer service was carried out 300 hours ago & the last safety inspection in January 2026

I/01 MODUL CAMBUS RS - 12404582

I/01 MODUL CAMBUS RS - 12404583

I/01 MODUL CAMBUS RS - 12404585

A-IN INPUT VOUCHER RS - 12404597

Key data: 4000 KW, 11000 V

Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...

Key data: 1800 KW, 2250 kVA, 415 V

Diesel Generator 5 x CAT 3516B 2000 kVA / 50 Hz – 2023 Never Installed Never installed, surplus CAT 3516B skid mounted diesel generating sets. Engine is coupled with 2000 kVA / 415 V / 50 Hz Leroy Sommer DSG 74L1 brushless synchronous alternator with a flexible coupling, and both mounted on a rigid base frame. These units are designed for standby and prime duty. Main engine control panel EMCP, 24V electric starting system. Technical data Engine type CAT 3516B – 16-cylinder, 1500 rpm diesel engine Alternator Leroy Sommer 2000 kVA / 415V / 50Hz Power factor 0.8 Manufacturing year 2023 Operating hours Zero, never installed Number of units available 5 pcs Prime rating 2000 kVA (1600 kW) Stand by rating 2240 kVA (1800 kW) Control system EMCP 4.2

Key data: 3 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...

Pressure: 16 bar Motor: 0,04 kW Free air delivery: 0,93 m³/min Measurement (WxHxD): 525 x 1075 x 216 Weight: 36 kg Compressed air connection: 1/4

Pressure: 16 bar

Pressure: 14 bar

Key data: 588 KW, 380 1/min

In very good condition Rotating Removed due to scrapping of ship

Multi spindle drilling machine Brand: VITAP Type: ALFA DIGIT New machines - QUICK CHANGE SPINDLES - Side reference fences with digital electronic readouts and with manual exclusion for the execution of the system 32 mm drilling holes - Pneumatic cylinder for horizontal/vertical positioning of the boring group - Front caliper with digital electronic readouts - Nr. 2 alu fences with 2 stops each (1500 mm. each) - Quick change fitting of the alu fences with stops - 2 safety clamps inclined 4 degrees - 6 positions turret to adjust the drilling depth (0-80mm) - Height regulation of the boring group by mechanical digital position indicator - Automatic vertical-horizontal depth difference device (10 mm) - Drilling speed adjustment from the panel control - Strengthened steel structure for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropne ...

Stripe breaking device IMA