doosan d used for sale

Vertical machining center DOOSAN DNM 650, control system FANUC

The machine is in good technical condition, a visit and test drive is possible by prior arrangement. - Spindle passage 65 mm - without driven tools, with replaced bearings and belts.

This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details.

This 4-axis DOOSAN HM 8000 was manufactured in 2007. It features an impressive X/Y/Z axis travel of 1250 x 1000 x 1000 mm and a maximum load capacity of 1600 kg. The machine includes a tool magazine capacity of 90 positions and operates with a spindle speed of 20 - 6,000 RPM. If you are looking to get high-quality machining capabilities, consider the DOOSAN HM 8000 horizontal machining centre we have for sale. Contact us for further details.

Torni CNC, Doosan Puma TW2600, 2016 (low hours), complete with robot, it can be inspected in our warehouse in Gussago BS

This 5-axis DOOSAN PUMA 2000SY was manufactured in 2006. It features a sub-spindle and a Y-axis for enhanced machining capabilities. The machine includes a bar feeder and 10 motorized driven tool holders, providing versatility for various applications. With a total operating time of 8836 hours, this horizontal turning machine represents a valuable opportunity for high-quality turning capabilities. Reach out for further details regarding this machine.

CNC Table Type Horizontal Boring Mill Doosan DBC 130II. S/No. MB0003-000435 New in 2013 Control Fanuc 31i-MA Spindle Dia. : 130mm Travel : XYZ – 3000/2000/1600 mm W – 700 mm Rotary Table (1/1000 ͦ) Size : 1600 x 1600 mm 2 Pallets Spindle Speed : 2500 rpm Tool type : BT50 ATC : 80 tools

Key data: 376 mm, 760 mm, 3500 1/min

Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic Tailstock.: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6000 kg

Key data: 370 mm, 712 mm, 3500 1/min

DOOSAN LYNX300M (34000euro) -:CNC FANUC - Chuck diameter: 250 mm - Diameter over bed: 651 mm - Max. turning diameter: 370 mm - Max. turning length: 712 mm - Spindle bore: 76 mm - Spindle speed: 3,500 rpm - C-axis - Main spindle motor: 15 kW - Rapid feeds X/Z: 30/24 m/min - BMT 55 turret: 12 positions - Rotating tool speed: 5,000 rpm - Machine weight: 4.5 t - Overall dimensions: 3 x 1.8 x 1.7 m

Key data: 376 mm, 760 mm, 3500 1/min

Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore.: 86mm With jacket tube.:78mm Revolver head.: 12 main positions 12 secondary positions, BMT65 connection, Sub spindle: 4500 1/min Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw Tool speed max=5000 1/min X movement range.: 260mm Z axis movement range.: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed.: 30m/min Automatic tool measurement with probe arm Weight.: 6450 kg

Accessories: Loading bucket KSW 3.5 m³, 2,600 mm Loading bucket KSW 2.1 m³, 2,600 mm Quick coupler KSW L70

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: DOOSAN, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/doosan-gv158ti-used/731, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

turning diameter over bed: 1030 mm turning diameter over slide rest: 800 mm turning length: 3200 mm turning diameter: 900 mm control: FANUC 31i B : 165 mm spindle cone: ASA A1-15 travel -x axis: 470 mm travel -z axis: 3235 mm rapid travel - longitudinal/face: 12 / 10 m/min Measuring Speed: 3 - 1500 1/min spindle drive: 45 / 37 kW max. workpiece weight between centres: 7300 kg max.workpiece weight:each extra steadyrest: 1600 kg tail stock: tailstock adjustment: 3135 mm tailstock quill diameter: 160 mm tailstock quill stroke: 150 mm tailstock quill taper MT: 6 total power requirement: 64,44 kVA weight of the machine ca.: 22 t dimensions of the machine ca.: 7,36 x 2,77 x 2,78 m High-precision turning centre - 3-jaw chuck dia. 800 mm - FANUC 31iB CNC control - Tailstock - Hydraulic steady rest - 12-station tool turret (32 x 32 mm) - Chip conveyor - Coolant system - Tool setter - CE The da ...

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: FANUC 31i-B spindle turning speed - stepless: 15000 U/min spindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kW pallet table size: 500 x 500 mm workpiece weight: 500 kg distance spindle center to table: 80 - 810 mm Rapid Travel X / Y / Z-Achse: 60 m/min dimension of workpiece: 800 x 1000 mm total power requirement: 80 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,45 x 2,68 x 2,88 m Horizontal CNC machining centre - CNC control FANUC 31i-B - Tool changer 60-fold (BT 40 Big Plus) - 2 pallet changer(pallet 24-M16) - Table / Pallet indexing Full B axis. - Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m. - Coolant/Filtering Unit - Chip Conveyor - Exhauster The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroj je v dobrém technickém stavu, po předchozí dohodě možnost odzkoušení.

Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm

Control: Siemens Sinumeric 828 D Turning length: 1,600 mm Turning diameter: 900 mm X axis travel: 470 mm Z axis travel: 1,650 mm Speed: 3 – 1,500 rpm Tool turret: 12 places (all driven) Tool holder: BMT 85P Equipment: Self-centering bezel Conveyor Touchsetter 3-jaw chuck Programmable tailstock Aspirator Coolant pump 20bar with cyclone filter Oil mist extraction

x-travel: 1270 mm y-travel: 670 mm z-travel: 625 mm CNC-control: SIEMENS 828 D table-size: 1300 x 670 mm max. table load: 1000 kg spindle taper ISO: SK 40 spindle turning speed range: 12000 U/min feed stepless: 8000 mm/min rapid traverse: 36 / 36 / 30 m/min drive capacity - spindle motor: 18,5 kW tool change unit: 30 Pos. total power requirement: 40 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,20 x 2,45 x 2,40 m chip conveyor: 4,10 x 0,65 x 1,50 coolant: 3,60 x 2,20 x 0,80 m - Siemens 828D CNC control - Direct drive spindle: 12,000 rpm - Two-contact clamping system in the BIG-PLUS spindle (SK40 spindle taper) - Oil cooling of the spindle head - Thermal compensation system (software) - Tool magazine: 30 tools - RENISHAW tool and workpiece probe - Internal cooling via the spindle centre: 12 bar - External cooling with air and cooling lubricant - Internal thread spi ...

This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information.

This DOOSAN PUMA 240B was manufactured in 2008. A robust horizontal turning machine featuring a 4500 rpm spindle speed and a 12-tool turret for efficient operations. Equipped with Fanuc Control and main dimensions of X242 mm and Z580 mm. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA 240B machine we have for sale. Contact us for more information.

This DOOSAN PUMA GT2100 was manufactured in 2015. A robust horizontal turning machine featuring a main 8 inch chuck, X242 mm and Z580 mm travel, and a 4500 rpm spindle speed. It holds up to 12 tools on the turret. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA GT2100 machine we have for sale. Contact us for more information.

This 3-axis DOOSAN Puma 2600M was manufactured in 2011. A robust horizontal turning machine featuring a Fanuc I Series control system, it offers a maximum turning diameter of 376 mm and a length of 760 mm. Spindle speed reaches up to 3,500 rpm. Includes chip conveyor, tool holders, and driven tools. If you are looking to get high-quality turning capabilities consider the DOOSAN Puma 2600M machine we have for sale.Contact us for more information.

This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information.

This DOOSAN PUMA 240B was manufactured in 2005. A robust horizontal turning machine featuring a 4500 rpm spindle and a 12-tool turret. Ideal for precision machining tasks. If you are looking to get high quality turning capabilities consider the DOOSAN PUMA 240B machine we have for sale. Contact us for more information.

This 3-axis DOOSAN PUMA 3050 LM lathe was manufactured in 2024. It features a robust 12-position BMT55 Servo Power Turret, a powerful main spindle motor at 18.5/15 kW, a spindle speed of 3.000 rpm, and a milling spindle speed of 5000 rpm. The machine includes a 12 hydraulic chuck, chip conveyor, and a FANUC - 0iPLUS control system. Ideal for precision, the DOOSAN PUMA 3050 LM machine we have for sale represents a significant opportunity. Contact us for further details regarding this turning machine.

This DOOSAN PUMA 215 turning machine was manufactured in 2011. It features a swing over bed of 510mm, a workpiece diameter of 270mm, and a length capacity of 522mm. Equipped with a DOOSAN FANUC i Series CNC system, it offers rapid traverses of 16 m/min in X and 20 m/min in Z. A great opportunity to buy this DOOSAN PUMA 215 turning machine. Contact us for further details regarding this vertical turning machine.

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information.

This 3-axis DOOSAN DNM 500 vertical machining center was manufactured in 2010. It features a large table size of 1200x540mm, capable of handling loads up to 800 kg. The machine operates with a speed of 36 m/min and includes a BT40 tool holder. Ideal for robust milling operations, the DOOSAN DNM 500 machine we have for sale represents a significant opportunity. Contact us for more information.

This 3-axis DOOSAN DNM 415 vertical machining center was manufactured in 2015. It features a 765 x 450 x 510 mm travel range, a 920 x 435 mm table size, and a 24-station tool changer. The spindle operates at 10,000 RPM with a 15 KW motor. Includes a Fanuc Series 01-MC controller and a chip conveyor. Ideal for precision machining. Contact us for further details regarding this vertical machining center.

This 5-axis DOOSAN Lynx 2100LSYA lathe was manufactured in 2020. Featuring a SIEMENS SINUMERIK 828D control, it offers spindle speeds up to 6000 rpm and includes a sub-spindle for versatile operations. With a max turning diameter of 300 mm and length of 510 mm, it also has driven tools and rapid traverse rates up to 36 m/min. Consider this Doosan Lynx 2100LSYA lathe, ideal for advanced turning tasks. For more information, please reach out to us.

This DOOSAN PUMA 300 C horizontal turning machine was manufactured in 2006. It features a 12-inch chuck, a maximum turning diameter of 350 mm, and a maximum turning length of 760 mm. The spindle supports a speed of up to 3,500 rpm with a bar capacity of 76 mm. Ideal for precision turning, it also includes a servo indexing tool post with 12 tools. Contact us for more information about this machine.

travel -x axis: 1.050 mm travel -y axis: 570 mm travel -z axis: 510 mm control: HEIDENHAIN - TNC620 number of spindle speeds: 12.000 U/min tool taper: BT 40 table dimension (L x W): 1300 x 570 mm numbers of positions in the tool changer: 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 mm, 850 mm, 800 mm

For sale Doosan 5-axis machining center type 850 LSR. equipped with a Fanuc control system, Key technical data (VCF 850LSR Travel (X/Y/Z): 3000 / 850 / 800 mm Table dimensions: 3500 x 870 mm Maximum table load: 3500 kg (incl. integrated turntable) Integrated rotary table (C-axis): Ø 800 mm B-axis (spindle inclination): 220° (+110° / -110°) Spindle speed: 12,000 rpm (standard) Spindle power: 18.5/22 kW (Fanuc) Spindle taper: BT40 (BIG-PLUS) Tool magazine: 60 stations (chain magazine) Rapid traverse (X/Y/Z): 40 m/min Machine weight: approx. 24,000 kg The machine is available from stock, subject to prior sale. For more information; Send an e-mail to chrismachinematch.nl

This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2006. It is a multi-spindle turning machine featuring twin spindles and twin turrets, equipped with a Fanuc 18i-TB control. Key specifications include a maximum turning diameter of 330 mm, turning length up to 500 mm, and bar capacity of 76 mm. Main spindle speed reaches 3500 RPM, while the sub-spindle can go up to 6000 RPM. If you are looking to get high quality turning capabilities consider the DOOSAN Puma TT 2500 SY machine we have for sale. Contact us for more information.

Key data: 700 mm, 5050 mm

CNC Turning Milling Center Manufacturer: Doosan Type 700XLY ll Year of construction 11/20 IBN 2021 Control Fanuc iSeries Plus max. turning length 5050mm max. turning diameter 900mm 12-fold tool turret, all 12 of which are driven Full Y-axis and C-axis Switch-on hours approx. 25,000 on 22.05.25 Spindle hours approx. 5,000 on 22.05.25 Machine is in a very good condition. As accessories there are A large bezel SMW Three-jaw chuck 630mm Face Plate 800mm div. Powered Tools Various steel holders Accessories had cost 80,000 euros Machine is sold due to the poor order situation

This 4-axis DOOSAN H310T was manufactured in 2006. It features a maximum turning diameter of 310 mm and a turning length of 230 mm. The machine is equipped with twin spindles and twin turrets, allowing for efficient machining operations. With a spindle speed of up to 3,500 rpm and a robust construction, this CNC turning center is designed for high productivity. If you are looking to get high-quality turning capabilities, consider the DOOSAN H310T machine we have for sale. Contact us for further details.

This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information.

A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.

Inv. Num. : 9033 Type: PUMA ST32G Producer: DOOSAN Created: 2018 Parameters: Control System: FANUC Series 31i Model B Switch-on hours: 4,360 h Hours: 2,443 h Maximum turning diameter: 32 mm Max. turning length: 320 mm Maximum spindle speed: 8000 1/min Axis Z: 320 mm Rapid traverse X/Y/Z: 32 m/min Spindle diameter: 32 mm Length: 2640 mm Width: 1400 mm Height: 1840 mm Weight: 3500 kg Equipment: Technical documentation Chip conveyor High-pressure cooling 70 bar IEMCA BOSS 338 Bar Feeder Oil mist extraction Losma

Key data: 800 mm, 450 mm, 510 mm

Doosan DNM 4500 Vertical Machining Center (VMC) Year of construction: 2016 Condition: Used – in very good working condition Well-maintained Doosan DNM 4500 vertical machining center, ideal for precision milling and general machining. Technical specifications: X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 510 mm Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min Spindle speed: up to 8,000 rpm Spindle power: 18.5 kW Spindle torque: 117.8 Nm Tool changer: 30 positions Table size: 1,000 mm Max. workpiece weight: 600 kg Machine weight: approx. 5,000 kg The machine has been regularly maintained and is in good condition. Inspection under power is possible.

This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details.

This 6-axis DOOSAN M1013 collaborative robot was manufactured in 2021. It features a payload capacity of 10 kg and a reach of 1,300 mm, making it suitable for various applications. The machine includes a stable construction with an aluminum plate and a rotary table for enhanced functionality. If you are looking to get high-quality automation capabilities, consider the DOOSAN M1013 collaborative robot we have for sale. Contact us for further details.

This 4-axis DOOSAN LYNX 2100 LSY was manufactured in 2019. It features a Y-axis for multi-tasking operations, a 12-station turret with live tooling, and a hydraulic 3-jaw chuck. The machine is equipped with a bar feeder system, allowing for efficient serial production. If you are looking to get high-quality turning and milling capabilities, consider the DOOSAN LYNX 2100 LSY turn-mill centre we have for sale. Contact us for further details.

The machine is in good technical condition, after prior agreement it is possible to test it. approx. 3000 hours of TRIPS 550X400

This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details.

The machine is in good technical condition, after prior agreement it is possible to test it. Fanuc i Series, Dmax320mm, X175 Z330, 5,000rpm, 12 tool positions, Tool measuring system, Part catcher, 4 jaw inserts,, Clamping pliers, many accessories

Horizontal turning machine manufactured in 2002. This DOOSAN S 550 L features a maximum workpiece diameter of 550 mm and a spindle power of 22 kW. It includes a programmable tailstock and a 12” 3-jaw chuck, enhancing operational efficiency and precision. If you are looking to get high-quality turning capabilities, consider the DOOSAN S 550 L machine we have for sale. Contact us for further details.