doosan 510 used for sale

Machine has been used only 300 hours Machine is still under warranty Machine is like new condition X Y Z = 2500mm x 950mm x 850mm

Machine Details Warehouse number 1105-03648 Machine type CNC lathe - inclined bed machine Make DOOSAN DAEWOO Type PUMA 200 M Year of construction 1999 Control type CNC Control FANUC O T Storage location FRANCE Country of origin KOREA Delivery time by arrangement Freight base from location Price Technical details Turning diameter 290 mm Turning length 600 mm Control FANUC O T Bore diameter 66 mm Spindle speed 45-4500 rpm Revolver 12 COMPARTMENT Pinole diameter 80 mm Spindle head ASA - A 2 - 6 front bearing diameter 90 mm Tailstock pinole diameter 80 mm Centering bore mt - 5 Pinole travel 100 mm Axialkraf 12 , 5 - 500 kgf Sauter tool system driven tools 6 Number of tools max. 12 Total power requirement 36 kVA Machine weight approx. 4.2 t Information Equipment and accessories: Chip conveyor, C-axis, 12x star turret with AGW. TOOLS AND C AXIS FANUC O T ...

Multi axis 5 axis simultaneous Capto C63 tool holder Number of magazine: 40

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Doosan PUMA 280LM CNC lathe with C axis Length . 1050 mm Chuck size : 12 inch 5 live tools(4 horizontal + 1 vertical) Machine is in good working condition

Double turret Double spindle Spindle speed : 5000 rpm Number of axis : 8 Tool capacity : 12 + 12 Spindle motor power : 22 Kw Fanuc control unit

Control Fanuc ... Series 0i Clamping table surface ... 1000x450mm Axis X ... 800mm Axis Y ... 450mm Axis Z ... 510mm Spindle speed ... 0-8000 rpm. controlled axes ... 3 ISO 40 Machine weight ... 5000kg The machine is in good condition, possible to test under power.

Doosan Puma 400L CNC Lathe 15 inch chuck Machine has been purchased December 2013 Max Turning Dia: 560 mm

Doosan Puma MX 2500 S cnc lathe 7 axis Tools are on machine Machine is in very good condition

Machine Details Warehouse number 1105-03706 Machine type CNC lathe Make DOOSAN DAEWOO Type LYNX 210 Year of construction 2004 Control type CNC Control Fanuc 21-T Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from location Technical details Turning diameter 460 mm Turning length 300 mm Control Fanuc 21-T Turning diameter over bed 460 mm Turning diameter above the face carriage 280 mm Travel - x 160 mm Travel - z 330 mm Center width 335 mm Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Speed range - main spindle 42 - 4,000 rpm Spindle nose A2-6 Spindle passage 51 mm Spindle bore 65 mm Spindle cone 1/20 Drive power - main spindle 7.5 kW Tool slots upper turret 10 . Shaft diameter 32 (round) mm Shaft diameter 20 (square) mm Pipe diameter max. 50 mm Chuck diameter 200 mm Coolant tank 87 l Total power ...

Doosan S 400 15 inch CNC lathe Fanuc control unit Machine is in good working condition

Doosan Puma GT2100B CNC lathe 10 inches 2 axis 10 station turret X axis : Q390mm Z. axis: 525mm Chip conveyor Machine is in very good condition

On offer is a DOOSAN lathe, year 2006, type PUMA 160, FANUC computer, USED ONLY 50 WORKING HOURS

Manufacturer DOOSAN Model PUMA 700 LM Year 2005 CNC FANUC 21i TD Capacities Ø Swing over bed 1.030 mm. Ø swing over saddle 800 mm Max turning diameter 900 mm. Max turning length 3.200 mm. C Axis and Driven Tools INCLUDED Chuck size 24” Bar working diameter 164mm. Travels and feedrates X travel 470 mm. Z travel 3.235 mm. Rapid traverse rate X/ Z Axis 12/10 m/min Main spindle Max spindle speed 1500 rpm Speed ranges 2 Main spindle power 75/60 kW Main spindle torque 11.004 Nm Spidle nose A1 – 15 C Axis. Positioning Precision 0,001º Turret No of tool stations 12 Turret tool size 32 x 32 mm Max boring bar size 80 mm. Turret Indexig Time 0.25 s. Rotary tool motor power 11 kW Max rotary tool speed 3.000 rpm. Tailstock Tailstock travel 3.135 mm. Quill diameter 160 mm Quill travel 150 mm Quill bore taper #6 Equipment 3 Jaw-Hydraulic chuck Ø600 mm I ...

Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER

Type: Engine, Type number: DAEWOO PO34TI GENERATOR 50 KVA

Doosan LEO 1600 CNC Lathe Fanuc control unit 6 inches Machine has been used only on aluminium Machine has very low working hour Max. Turning diameter mm (inch) 320 (12.6) Max. Turning length mm (inch) 303 (11.9)

; Gross weight [kg]: 9370; Engine: Doosan DP222CC (E); Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

Doosan Puma 280L CNC Lathe Swing over bed mm. 630 Turning length : 1200 mm

FANUC 18iTB CNC X Axis travel 250 mm Y Axis travel 100 mm Z axis travel 580 mm Powered tool station No. 12 Self-centering chuck Diam 254 mm Spindle speed Rpm 35 -3500 Spindle power 15/22 kW C axis travel ° 360 Tool dimensions 25×25 mm Tool rotation speed Rpm 50-5000

CNC Fanuc Oi-TC Rotating diameter on the bench 510 mm Rotating diameter on the carriage 290 mm Maximum turning diameter 250 mm Maximum turning length 510 mm Turning diameter from bar 51 mm X axis travel 175 mm (160 + 15) Z axis travel 550 mm Spindle speed Rpm 6000 Spindle motor Kw 12 ASA A2#5 spindle connection

Doosan Puma 700XLY CNC Lathe Fanuc control unit Max. turning diameter : 900 mm Machine is in excellent condition Year : November 2017

Machine weight: 4200 kg Circulating diameter above the bed: 600 mm Revolving diameter above support: 400 mm Spindle speed - range: 45-4500 Max. workpiece weight: 120/300 kg Max. turning diameter: : 300 mm Max. turning length in chuck:: 510 mm Max. diameter of turned bar:: main spindle/counter spindle: 65/34

Manufacturer DOOSAN Model PUMA 3100L Year / Month 2013 / 07 CNC FANUC i SERIES Capacities Ø Swing over bed 850 mm. Ø over front door 720 mm. Ø swing over cross-slide 670 mm Max turning diameter 525 mm. Max turning length 1280 mm. Chuck size 12.5” Bar working diameter 102 mm. Travels and feedrates X travel 293 mm. Z travel 1.280 mm. Rapid traverse rate X/ Z Axis 30 m/min. Main spindle Max spindle speed 2.800 rpm Speed ranges 2 Main spindle power 22 kW Main spindle torque 6.605 Nm Spidle nose A2 – 11 Turret No of tool stations 10 Turret tool size 25 x 25 mm Max boring bar size 50 mm. Indexing Time 0,15 s Tailstock Quill diameter 100 mm Quill travel 100 mm Quill bore taper MT#5 Equipment Chip conveyor INCLUDED 3 Jaw-Hydraulic chuck Ø315 mm INCLUDED Automatic Tool pre-setter INCLUDED Hydraulic steady rest SMW Autoblock SLU-X-3.2-MS Others T ...

Doosan DNM 650 II Vertical Machining Center Machine is in good condition

Inv. Num. : 7400 Type: GT 2100 Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC Maximum turning length: 562 mm Max. turning diameter: 390 mm Maximum turning diameter over bed: 600 mm Maximum travel length in the X-axis: 230 mm Maximum feed rate in the Z-axis: 580 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Number of tools: 10 pieces Length: 3890 mm Width: 1628 mm Height: 1700 mm Weight: 3500 kg Equipment: Technical Documentation Conveyor Shovel Collets Bake Knife Collet head Universal three-jaw head Cutter head with 10 positions Programmable tip/spring 2023/3: Replacement of bearings in the spindle

Turning diameter: 600 mm Turning length: 340 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: FANUC Chipconveyor High pressure coolant system Samchully 3 chuck Tool eye Part catcher Specifications Metric US Standard Max. turning Ø600 mm X-Axis205 mm Z-Axis340 mm Spindle bore65 mm Speedrange4500 Rpm Spindle power15 kW ATC / revolver12 Chip conveyorYes Tool eyeYes Pinole taper4 Mk Stroke pinole360 mm Quill Ø65 mm

Turning diameter: 770 mm Turning length: 2155 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Fanuc SMW Autoblock chuck Tool eye SMW Autoblock steady rest Chip conveyor Ca. 11.000 Cutting hours Max. turning Ø: 770mm X-Axis:         357mm Z-Axis:         2155mm Spindle bore:   132mm Speedrange:     2000Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:7.5kW Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   6Mk Stroke pinole:  120mm Length:         5702mm Width:          2440mm Height:         2292mm Weight:         9700kg

Turning diameter: 850 mm Turning length: 3190 mm Turret positions: 12 CNC Brand: Fanuc 2 x SMW Autoblock chuck Tool eye SMW Autoblock steady rest Chip conveyor Ca. 1000 Cutting hours Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         3190mm Spindle bore:   115mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:7.5Rpm Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   5Mk Stroke pinole:  120mm Quill Ø:        120mm Length:         6585mm Width:          2280mm Height:         2315mm Weight:         12300kg

Doosan Puma 400 LMB CNC Lathe C axis Distance between centers: 2000 mm Max turning diameter: 700 mm

Turning diameter: 600 mm Turning length: 560 mm Turret positions: 12 CNC Brand: Fanuc Chipconveyor High pressure coolant system Samchully 3 chuck Tool eye Part catcher Max. turning Ø:600mm X-Axis:        205mm Z-Axis:        560mm Spindle bore:  65mm Speedrange:    4500Rpm ATC / revolver:12 Pinole taper:  4Mk Stroke pinole: 580mm Quill Ø:       65mm Length:        2570mm Width:         1600mm Height:        1700mm Weight:        3400kg Superior Machining PerformanceEquipped with a 15 kW (20.1 Hp) high-power motor and machine structure, and further enhanced spindle and axis ball screw stiffness, the Lynx 2100 Series offers excellent cutting capability up to a maxim ...

Turning diameter: 790 mm Turning length: 3150 mm Turret positions: 12 CNC Brand: Fanuc Max. turning Ø: 790mm X-Axis:         352mm Z-Axis:         3150mm Spindle bore:   115mm Speedrange:     2000Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:7.5kW Chip conveyor:  Yes Tool eye:       Yes Pinole taper:   6Mk Stroke pinole:  120mm Quill Ø:        120mm Length:         7024mm Width:          2276mm Height:         2335mm Weight:         12050kg

Doosan G15S-2 Forklift truck Serial: DG01041 Runs on LP GAS, up to 1500Kgs lift capacity, max lift height 4730mm, treble masts, tilt forwards and backwards, with sideshift, comes with fork extensions

CNC Lathe PUMA TT 1500 SY Manufacturer: DOOSAN Year: 2015 Control Fanuc ... Fanuc 31i Turning diameter ... 230mm Turning length ... 120mm Inclined bed Axis Y ... 100mm Counter spindle Spindle bore ... 51mm Tool turret... 24 driven tools... 12 Circumferential diameter above bed ... 300mm Spindle speed ... 60-6000 rpm controlled axes... 8 Axis C ... 360° Axis X ... 165mm Axis Z ... 470mm workpiece weight... 70kg L x W x H ... 3500x2080x2070mm Machine weight ... 8500kg The machine is in very good condition, possible to test under electricity.

This DOOSAN PUMA TT1800SY lathe was made in the year 2011. It is equipped with a FANUC 31i-Model A control unit. The machine has a spindle speed of 5000 rpm.

This Doosan MX2000S lathe was made in the year 2007 and has 15000 hours. It is equipped with a Fanuc Series 16i-TB control unit and has 9 axis. The machine has a spindle speed of 5000 rpm.

This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit.

This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.

Machine Details Stock number 1105-03821 Machine type machining center - vertical Make DOOSAN Type DNM 650 II Year of construction 2015 Control type CNC Storage location FRANCE Country of origin Korea Delivery time ON REQUEST Freight base from stock HAGUENAU FRANCE Technical details x-travel 1270 mm y-travel 670 mm z-travel 625 mm CNC control SIEMENS 840 D Table size 1300 x 670 mm table load 1000 kg Spindle holder ISO SK 40 Spindle speeds 8000 rpm Feed infinitely variable 8000 mm/min Rapid traverse 36 / 36 / 30 m/min Drive power - spindle motor 18,5 (15 min) kW Tool changing device 30 items. Operating voltage 380 V Total power requirement 40 kVA Machine weight ca. 8,5 t Space requirement approx. 3.20 x 2.45 x 2.40 m Chip conveyor 4.10 x 0.65 x 1.50 Coolant device 3.60 x 2.20 x 0.80 m Information Excellent condition! LIKE NEW with internal coolant supp ...

This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

; Gross weight [kg]: 3100; Engine: Doosan P126TI-II; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 2985; Engine: Doosan P126TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470

; Gross weight [kg]: 5950; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000

; Gross weight [kg]: 9370; Engine: Doosan DP222CC; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

very good condition inspection possible video available

The DOOSAN TT 1800 SY lathe, manufactured in 2006, features a FANUC Series 18i-TB control. It boasts robust features such as a sub-spindle, driven tools, dual C-axes, a Y-axis, and twin turrets. Additional amenities include a parts conveyor and a chip conveyor. Note, the automatic bar feeder requires some adjustments for optimal performance. Reach out for more information about this DOOSAN TT 1800 SY lathe.

; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1500