doosan 510 used for sale

Turning machining center Doosan type PUMA 1500 SY, bu, 2008 year, Fanuc CNC, overall dimensions 3118 1705, weight 4800 kg, power consumption 39.5 kVA, 4 pieces available!

; Gross weight [kg]: 4200; Engine: Doosan DP158LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 800

This DOOSAN 5100LB Lathe was made in 2018. It is equipped with a Fanuc Series OiT control unit and has 2 axis. The machine has a spindle speed of 1500 rpm.

Description: PDF Data Sheet attached in the 'Documents' section Machine declared with approximately 4500 working hours. Equipped with : ACE HP 5100 Evacuator, YOM 2014, 338 kg NANACON CIL1101 refrigeration unit Transformer JEIL TRANS, YOM 2014, 334 kg High pressure unit HIPRECO KHS-230/400214-00244 Not included in sale : ALLMATIC parts holder not included with sale. HEPA filter LNS not included with sale. z-motion: 750 mm, max. workpiece weight between centers: 500 kg, x-motion: 850 mm, y-motion: 700 mm, control: FANUC Series 31i-MODEL B, pallet table size: 500x500 mm, numbers of pallets: 2, taper: ISO#40, 7/24 Taper, toolchanger positions: 80, feed range: 60,000 mm/min, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 4,500 x 3,000 mm

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

DAEWOO MARINE ENGINE V180 TI + GEARBOX 1800 RPM 600 HP

Control: FANUC 18 M Technical data Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Table divisions (B): 1 ° Pallets: Length: 450 mm Width: 450 mm Time of changing palets: 12.5 sec Transport weight: 300 kg Tool changer: Number of tools: 40 Tool diameter: 100 mm Tool lenght: 300 mm Max. tool-weight: 6 kg Time of tool changing: 1.6 / 4 sec Spindle nose:: MAS BT 40 Horizontal spindle speeds: number (steps): 2 stepless from: 120-3000 rpm up to: 3000-12000 rpm Feed range: 1 - 15000 mm/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Spindle motor: AC 22/18.5 kW Feed motor: 3.8 kW Total power required: 45 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 3048 mm Width: 4051 mm Height: 3180 mm Various accessories: Internal coolant supply (cts): 20 bars  ...

Key data: 1030 Fanuc, 1650 21 i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T 3 Chuck Kitagawa 630 mm Chip conveyor Tool eye Tool holders in Revolver Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Key data: 1030 Fanuc, 1650 18i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

Key data: 850 Fanuc, 1350 Oi, 12

Turning diameter: 850 mm Turning length: 1350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         1.350mm Spindle bore:   102mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5000Rpm Power live tools:7,5 kW Chip conveyor:  Yes  Stroke pinole:  5mm Quill Ø:        100mm Length:         4.500 mm  Width:          2.105 mm  Height:         2.300 mm  Weight:         7.500 kg 

MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM

Key data: 390 Fanuc, 800 18i-TB, 12

Turning diameter: 390 mm Turning length: 800 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-TB Gantry loaded Bar feeder Double chuck 250 mm Axis X1 / X2 / Z1 / Z2 / C1 / C2 / Y / B Axis Max. turning Ø:  390mm X-Axis:          255mm Y-Axis:          120(+60/-60) mm Z-Axis:          800mm B Axis:          800° Spindle bore:    76mm Speedrange:      3500Rpm Spindle power:   26kW Subspindle speeds:4000Rpm Subspindle power:26kW ATC / revolver:  12 Speed live tools:4000Rpm Chip conveyor:   Yes  Tool eye:        Yes  Length:          4.000 mm  Width:           3.200 mm  Height:          ...

Support / Pratzen/ Traverse N83ymlcr from a MobilExcavator Doosan with a total weight of approx. 16-19to. The attachment part is almost unused and was track suspension immediately after the new purchase of the excavator. It can be mounted in place of the clearing shield or on the opposite side. The exact year of construction and the type of excavator are not known.

Turning diameter: 570 mm Turning length: 1330 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18-T Max. turning Ø: 570mm X-Axis:         282mm Z-Axis:         1.330mm Spindle bore:   77mm Speedrange:     3500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  100mm Quill Ø:        100mm Length:         4.000 mm  Width:          2.000 mm  Height:         2.100 mm  Weight:         6.700 kg 

Turning diameter: 900 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: OT DOOSAN - PUMA 450 CNC Lathe Ø 900 x 1000 mm MACH - ID 6351 Make: DOOSAN Type: PUMA 450 Control: Fanuc OT YOP: 1997 Max. turning Ø    900 mm X-Axis    370 mm Z-Axis    1.075 mm Spindle bore       117 mm Speedrange         2000 Rpm Spindle power    37 kW ATC / revolver    12 Chip conveyor      yes Pinole taper          6 Mk Stroke pinole       150 mm Quill Ø     150 mm Dimensions Length      6.200 mm Width        2.460 mm Height       2.800 mm Weight      14.000 kg

Turning diameter: 670 mm Turning length: 3190 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc MACH - ID 6090 Make:DOOSAN Type:PUMA 3100 ULY Control:FANUC YOP:2010 Hours:5800 Max. turning Ø   670 mm X-Axis      293 mm Y-Axis      130 mm Z-Axis       3.190 mm Spindle bore     102 mm Speedrange       2800 Rpm Spindle power      25 kW Speed live tools       5000 Rpm Control          Fanuc Chip conveyor       Yes Tool eye         Yes Pinole taper        Mk 4 Mk Dimensions Length        6.600 mm Width         2.880 mm Height ...

Table length: 920 mm Table width: 435 mm Longitudinal X: 762 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Fanuc CNC Model: i Series MACH-id    5565 MAKE         DOOSAN TYPE            DNM 400 - II YOP             2014 SPECIFICATIONS X - Travel       762 mm Y - Travel       435 mm Z - Travel        510 mm Table Length     920 mm Table Width      435 mm Table load         600 Kg Feed rate  X-Axis        10.000 mm/min. Feed rate Y-Axis          10.000 mm/min. Feed rate Z-Axis          10.000 mm/min. Spindle Taper       ...

Turning diameter: 320 mm Turning length: 350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi-Tc MACH-id     5463 MAKE         Doosan Korea TYPE           Lynx 220 YOP             2009 SPECIFICATIONS Max. turning Ø    320 mm X-Axis         175 mm Z-Axis          330 mm Spindle bore       51 mm Speedrange       4000 Rpm ATC / revolver        12 Control    FANUC Oi-TC Chip conveyor         yes Tool eye       yes Pinole taper        4 Mk Stroke pinole        80 mm Quill Ø       65 mm DIMENSIONS Length  &nbs ...

Table length: 790 mm Table width: 435 mm Longitudinal X: 635 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Fanuc MACH-id     5414 MAKE         DOOSAN TYPE           DNM 400 A YOP             2010 SPECIFICATIONS X - Travel      635 mm Y - Travel      435 mm Z - Travel       510 mm Table Length         790 mm Table Width           435 mm Table load              400 Kg Feed rate X-Axis        30.000 mm/min. Feed rate Y-Axis         30.000 mm/min. Feed rate Z-Axis          30.000 mm/min. Spindle Taper  &n ...

Turning diameter: 510 mm Turning length: 650 mm Turret positions: 12 CNC Brand: Fanuc MACH-id     5372 MAKE          DOOSAN TYPE            LYNX 220 LM YOP              2008 SPECIFICATIONS Max. turning diameter Ø       510 mm DBC Turning length        650 mm X-Axis       175 mm Y-Axis       650 mm C-Axis        360000 ° Spindle bore      51 mm Speedrange        5000 Rpm ATC / revolver       12 Speed live tools      6000 Rpm Control            FANUC Chip conveyor        Yes Tool eye          Yes Pinole taper ...

Turning diameter: 780 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: i Serie MACH-id   5069 MAKE        DOOSAN TYPE           PUMA 2600 L YOP             2011 SPECIFICATIONS Swing        780 X-Axis      260 mm Z-Axis       1350 mm Control      FANUC i Serie Chip conveyor        Yes Tool eye        Yes DIMENSIONS Length        3600 mm Width          2000 mm Height         2000 mm

Turning diameter: 630 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21i-TB MACH-id    4209 MAKE        DOOSAN TYPE          PUMA 280 M YEAR         2008 SPECIFICATIONS Swing over bed    630 Swing                  500 X Axis                  242 Z Axis                   680 Controll                  Fanuc 21i-TB Tool changer          12 Chip conveyor        Yes Swing over bed Ø      630 mm DIMENSIONS Length       4000 mm Width         2550 mm Height  ...

Table length: 790 mm Table width: 435 mm Longitudinal X: 635 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Fanuc CNC Model: Oi MACH-id   4216 MAKE       DOOSAN TYPE         DNM 400 A YEAR        2010S PECIFICATIONS X - Travel       635 mm Y - Travel       435 mm Z - Travel        510 mm Controll      FANUC Oi Table Length x Width      790 x 435 mm Table load in kG     400 Kg Spindle Taper       ISO 40 kW power on spindle      11 kW Spindle speeds / ranges     8000 Rpm ATC tool changer    20 Number off controlled axis  3 DIMENSIONS Length        &nbs ...

Turning diameter: 510 mm Turning length: 320 mm Turret positions: 0 CNC Brand: Fanuc MACH-id    4217 MAKE         DOOSAN TYPE           LYNX 220 L YEAR          2013 SPECIFICATIONS Swing over bed Ø   510 mm Control        FANUC Swing over cross slide     290 mm Distance between centres      320 mm Spindle bore      45 mm Spindle speeds / ranges    6000 Rpm Power      15 Kw DIMENSIONS      Length      2400 mm Width       1600 mm Height       2000 mm

Table length: 1200 mm Table width: 540 mm Longitudinal X: 1020 mm Cross Y: 540 mm Vertical Z: 530 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Fanuc MACH-id    4218 MAKE        DOOSAN TYPE          MYNX 5400 / 50 YEAR         2010 SPECIFICATIONS X - Travel        1020 mm Y - Travel          540 mm Z - Travel           530 mm Controll            FANUC Table Length x Width          1200 x 540 mm Table load in kG         800 Kg Spindle Taper        BT 50 kW power on spindle        15 kW Spindle speeds / ranges      8000 Rpm ATC tool changer     24 Co ...

Turning diameter: 780 mm Turning length: 1310 mm Turret positions: 0 CNC Brand: Fanuc MACH-id   4219 MAKE       DOOSAN TYPE         2600 L YEAR       2012 SPECIFICATIONS Swing over bed Ø       780 mm Swing over cross slide     630 mm Distance between centres      1310 mm Spindle bore      76 mm Spindle speeds / ranges     3500 Rpm Power        22 Kw DIMENSIONS Length      3600 mm Width       2000 mm Height      2000 mm

Turning diameter: 510 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18 T MACH-id   4139 MAKE       DAEWOO - Korea TYPE         PUMA 200 LMA YEAR        09.1999 SPECIFICATIONS Swing over bed Ø     510 mm Control        FANUC 18 T Swing over cross slide      330 mm Distance between centres        550 mm Spindle bore     46 mm Spindle speeds / ranges        6000 Rpm Power           11 Kw DIMENSIONS Length     2660 mm Width      1700 mm Height     2000 mm Chip conveyotr Coolant system Large tooling package

Turning diameter: 510 mm Turning length: 440 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T MAKE    Doosan Korea TYPE      PUMA 200 M YEAR     1999.09 SPECIFICATIONS Swing over bed Ø   510 mm Control    FANUC 18 T Swing over cross slide    330 mm Distance between centres    440 mm Spindle bore  76 mm Spindle speeds / ranges    4500 Rpm Power   10 Kw DIMENSIONS Length   2660 mm Width     1700 mm Height    2000 mm incl. revolver and live tools !incl. chip conveyorincl. tailstockincl. large toling packageincl. kitagawa 3 chuck B 210 chuck ?free Aug 2018Doosan Puma 200 m for sale, we have also some other cnc lathes with live tooling.  

Turning diameter: 770 mm Turning length: 2000 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 MACH-id   3976 MAKE       DOOSAN TYPE         PUMA 400 LMC YEAR        2008 SPECIFICATIONS Swing over bed Ø   770 mm Control     FANUC 21 Swing over cross slide   590 mm Distance between centres   2000 mm Spindle bore   166 mm Spindle speeds / ranges    1500 Rpm Power    30 Kw DIMENSIONS Length   5500 mm Width     2200 mm Height    2400 mm- C Axis 0.001 Gr- Live tooling 11 kW- Large package jaws- Optional 10 set live tooling- SMW Autoblock steady rest- Chip conveyor- Tool eye- New EUR 240.000 ( incl. all options)

Turning diameter: 570 mm Turning length: 650 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 21 iTB MAKE   DOOSAN TYPE    PUMA 240 MB YEAR   2004 SPECIFICATIONS Swing over bed Ø  570 mm Control    FANUC 21 i TB Swing in the gap Ø  370 mm Distance between centres   650 mm Spindle bore   77 mm Spindle speeds / ranges  3500 Rpm Power   18.5 Kw DIMENSIONS Length   3430 mm Width    1800 mm Height    1800 mm Doosan PUMA 240 MB Ø 570 with Live tools, we have also some other cnc lathes for sale

Diesel forklift Machine Brand: DOOSAN Designation: D90S-5 Year of production: 2012 Counter Reading (mtg): 7970 Empty weight (Kg): 12197 Lifting capacity (kg): 9000 Height. lift. (mm): 3100 Lateral fork travel Mast type: STD UDT review until March 2022 Fuel type: diesel After a large technical inspection for over PLN 30,000 (we have invoices for everything) - new tires - new fore fore fore - regeneration of actuators, - gearbox: discs + sealants - brakes: discs and bearings - all oils, liquids and filters Technical condition: used, very good

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

; Gross weight [kg]: 1340; Engine: Doosan DN03-OOG01; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 108

Turning diameter: 575 mm Turning length: 1300 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T SPECIFICATIONS Swing over bed Ø  575 mm Control   Fanuc 18 T Swing over cross slide   370 mm Distance between centres  1300 mm Spindle bore77 mm Spindle speeds / ranges  3500 Rpm DIMENSIONS Length   4000 mm Width  1980 mm Height  2098 mm The used lathe Doosan Puma 250 LMB type with CNC Fanuc 18 T  

; Gross weight [kg]: 5650; Engine: Doosan DP180LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

; Gross weight [kg]: 3600; Engine: Doosan DP126LB; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 625

; Gross weight [kg]: 4800; Engine: Doosan DP180LA; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1000

Table diameter: 0 mm Turning diameter: 580 mm Turning height: 450 mm Motor power: 0 HP/kW Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: I Series Make Doosan Type PUMA VT 450 Year 2008 FANUC i series Centre height (mm)Swing = 580 Center distance (mm)Height = 450 Spindle bore Speeds 2500 Rpm ATC 12 positions Chip conveyor High pressure coolant  

; Gross weight [kg]: 2100; Engine: Doosan P086TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 285

Table length: 920 mm Table width: 435 mm Longitudinal X: 762 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 828 D Make Doosan DNM 4 Type DNM 400 II Year 2014 Siemens 828 D Table length (mm) L = 920 Table width (mm)W = 435 Longitudinal X (mm) X = 762 Cross Y (mm) Y = 435 Vertical Z (mm) Z = 510 Bt40/12.000/18.5 kW ATC 30 positions 20 Bar coolant- High pressure coolant 20 Bar - LNS chip conveyor - Siemens SINUMRIK 828 D - Taster Renishaw TS 27R - Robot interface for UR 10  

; Gross weight [kg]: 6250; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1250

Turning diameter: 500 mm Turning length: 450 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe  

Turning diameter: 550 mm Turning length: 513 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan PUMA Type 240 MB Year 2007 FANUC 21i TB Doosan Puma 240 MB Centre height (mm) Swing = 550 Center distance (mm) DBC = 513 Spindle bore Bore = 76 ATC 12 Position Speeds 4500 / 11 kW Live tooling 5.5 kW / 5000 Rpm Bar feeder IEMCA 65 mm Bar feeder interface Chip conveyor 7 Bar Coolant Tool eye Tool Gripper Tool managment  

; Gross weight [kg]: 1950; Engine: Doosan P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

Turning diameter: 510 mm Turning length: 322 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Fanuc Oi Mate - TC Max. turning Ø:510mm X-Axis:        175mm Z-Axis:        330mm Spindle bore:  45mm Speedrange:    6000Rpm Spindle power: 15kW ATC / revolver:12 Chip conveyor: Yes  Length:        3.325 mm  Width:         1.600 mm  Height:        1.655 mm  Weight:        2.900 kg