door used for sale

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...

Paint Booth Drying Booth Paint Spraying System Manufacturer: LUTRO Interior dimensions: LxWxH = approx. 750x500x400 cm Bolted steel construction with sandwich panels Room volume: approx. 150 m³ 2 exhaust walls on the front side as well as supply air ceiling with 4 fields 4 explosion-proof luminaires on each side, 4 fluorescent tubes each Front fully openable with segment door Lid of the cab can be opened in the middle to the entrance with overhead travelling crane 2 entrance doors on the side complete with control cabinet Extraction motors, etc. Heating system for heating the supply air Airless Sprayer

HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg

Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...

General SKUR1226 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW No.15972 Year of construction1974 Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel Information Floor space2,2x3,5 m Weight5000 Kg Floorspace2,3x2,2 M Total height2,3 MPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0837 LocationBarneveld MakeInox Maurer AG (CH) Type6900 ltr. No.12226 Year of construction1992 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6900 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity6900 ltr Vessel sizesdia. 1980x2300mm Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 80mm (4x). dia.200mm (2x) Outletdia. 80mm Max. temperature-30/200 degr.C With jacket(320 ltr) Half coil jacketed1.4306 Max. temperature-20/200 degr. C With propellor stirrercheck Motor1.3 kW, 230/400 Volt, (EX) Speed mixing shaft945 rpm Information Mounted on legscheck Weight1900 Kg Floorspace3,0x2,6 M Total height2,8 M ATEX compatiblecheckPressure vesselsInox-maurerTanks > P ...

General SKUR0847 LocationBarneveld MakeInox Maurer AG (CH) Type6875 Ltr. No.12458-6 Year of construction1992 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6875 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity6875 ltr Vessel sizesdia. 1980x2300mm Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 50mm (4x) dia. 300mm (2x) Outletdia. 80mm Max. temperature-30/200 degr.C With jacket(120 ltr) Half coil jacketed1.4306 Max. temperature-30/200 degr. C With propellor stirrercheck Motor1.3 kW, 380 Volt, (EX) Speed mixing shaft935 rpm Information Mounted on legscheck Weight1600 Kg Floorspace3,0x2,5 M Total height2,9 M ATEX compatiblecheckPressure vesselsInox-maurerTanks > Pre ...

General SKUR0821 LocationBarneveld MakeDe Drietrich & Cie (FR) No.18913 Year of construction1985 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume3425 Ltr. Pressure3.2 Bar Specified Features - Pressure vessel MaterialGlass Capacity3425 ltr Vessel sizesdia. 1550x1700mm Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 80mm (4x) dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr.C Information Mounted on legscheck Floorspace2,0x2,0 M Total height2,3 M Weight1400 KgPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Bar ...

General SKU045C405 LocationBarneveld MakeHalvor Forberg A/S Larvik TypeF-1000 No.1904 Year of construction1997 Pressure Working pressure0.5 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor30 KW Specified Features - Paddle dryer Paddle dryer(1x) Double shaftcheck Capacity3500 Ltr, Useful capacity 1000 Ltr Trough sizes1350x1695x1400mm InletDia: 300mm ManholeFull acces via door OutletDia: 590mm With jacketcheck 31 Ltr. Max. temperature150°C With adjustable packing glandscheck Motor30 KW, 380/660 Volt Speed mixing shaft± 32 Rpm MaterialStainless steel 1.4401 (316) Information Floorspace3,7x2,3 M Total height3,4 M Weight10.000 KG Extra Specifications-- RECONDITIONED -- Minerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAn ...

General SKUR1227 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW Year of constructionunknown, manufacturer plate is missing Main Features Inlet diameter710 mm Specified Features - Pin Mill MaterialMild steel Pin Mills Pin disc millcheck 2 Driven rotorscheck Rotor sizedia 710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm Inlet120x400mm Feeding with rotating valvecheck Information Floorspace2,3x2,2 M Total height2,3 M Weight3500 KgPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR0836 LocationBarneveld MakeHANAG AG (CH) Type4413 Ltr. No.11897.3 Year of construction1992 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4000 Ltr. Pressure3.2 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity4413 ltr (4000 ltr. nett) Vessel sizesdia. 1780x1700mm Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 50mm (4x) dia. 300mm (2x) Outletdia. 80mm Max. temperature-30/200 degr,C With jacket(116 ltr) Half coil jacketedcheck Max. temperature-30/200 degr. C With propellor stirrercheck Motor2,2 kW 220/380 Volt (Ex) Speed mixing shaft203 rpm Information Mounted on legscheck Weight1250 Kg Floorspace2,2x2,2 M Total height2,9 M ATEX compatiblecheckPressure v ...

General SKUR0867 LocationBarneveld MakeP.Spiess-Tschudin AG (CH) TypeFZS 80 F16 Mach.No.unknow, manufacturer plate is missing Main Features MaterialStainless steel Motor5 KW Surface2.5 m2 Specified Features - Nutsche filter Filter surface2.5 m2 Vessel sizesdia. 1750x400mm Top connectionsinspection door 450x350mm (2x) dia. 40mm (1x) dia. 30mm (1x) With stirrercheck Motor5,0 kW, 380 Volt (Ex) Stirrer can be liftedcheck MaterialCeramic, Stainless steel Information Year of construction1967 Mounted on legscheck Floorspace2,1x 2,0 M Total height4,0 M Weight2600 Kg ATEX compatiblecheck Extra Specificationsbottom provided with permeable tiles ( Silexith) wall with ceramic tiles inspection hatch in the wall 400x300mm Minerals & inorganicAPIBiopharmaceuticalAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedLubricants & oleoOther chemicalStarch ...

General SKUR0820 LocationBarneveld MakeDe Dietrich & Cie (FR) Type3425 Ltr. No.55320 Year of construction1985 Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume3425 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass Capacity3425 ltr Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 80mm (4x). dia. 200mm (2x) Outletdia. 80mm Max. temperature100 degr.C With propellor stirrercheck Motorcheck Information Mounted on legscheck Weight1450 Kg Floorspace2,4x2,0 M Total height2,3 MPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld,  ...

General SKUR0838 LocationBarneveld MakeInox Maurer AG (CH) Type6875 Ltr. No.12458-4 Year of construction1992 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6300 Ltr. Pressure3.2 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity6875 ltr (6300 ltr. nett) Vessel sizesdia. 1980x2300mm Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 50mm (4x) dia. 300mm (2x) Outletdia. 80mm Max. temperature-30/200 degr.C With jacket(120 ltr) Half coil jacketed1.4306 Max. temperature-20/200 degr.C With propellor stirrercheck Motor1.5 kW, 400 Volt, (EX) Speed mixing shaft945 rpm Information Mounted on legscheck Weight1600 Kg Floorspace3,0x2,5 M Total height2,9 M ATEX compatiblecheckPressure vesselsInox-maurerTanks >  ...

Used Palletizer AVE PAM 60 TECHNICAL DATA CONTAINER TYPE Bundle containing PET bottles PRODUCT Water PRODUCTION 14 pallets h PALLETS DIMENSIONS 800 1200 FORMAT NUMBER AND COMPOSITION 1 0 5L bottles Format 4 3 Pack size 290x205xh 205mm Bundles per layer on 800 1200 18 pallet No of layers 7 2 0 5L bottles Format 3 2 Bundles per layer on a 800 1200 36 pallet Number of layers 7 3 1L bottles Format 3 2 Pack size 265x177xh 290mm Bundles per layer on a 800 1200 21 pallet No of layers 4 5 4 1 5L bottles Format 3 2 Pack size 265x177xh 340mm Bundles per layer on a 800 1200 21 pallet No of layers 4 5 5 2L bottles Format 3 2 Pack size 285x190xh 355mm Bundles per layer on 800 1200 18 pallet N layers 4 The PAM60 palletizer is suitable for the automatic palletization of products such as shrink wrapped cartons or bundles The fully automatic work process is managed by a P L C SIEMENS S6 DESCRIPTION OF WO ...

box pasteurizer for the simultaneous pasteurization of four pallets, with temperature control and timer, Additional title: 4 pallets, Steam consumption: 250 kg/batch, Length: ca. 4,0 m, Width: ca. 1,5 m, Height: ca. 2,3 m, Features: control cabinet with temperature control and timer ventilators, folding door, various connections

Year of construction: 2009 Condition: good (used) Turning diameter over face slide: 580 mm Turning length: 1,000 mm Turning diameter: 360 mm Spindle bore: 80 mm Motor power: 22,000 W Spindle speed (max.): 3,000 rpm Spindle speed (min.): 20 rpm X-axis travel: 260 mm Z-axis travel: 1,000 mm Total weight: 7,500 kg Equipment: Documentation/manual, infinitely variable speed Okuma LB3000 EX MC1000, OSP P200L, Big Bore main spindle, automatic door on the left side, BMT60 turret with 12 driven tool stations (direct drive), NS tailstock, CE declaration of conformity, documentation, chip conveyor, coolant system with 8 bar, German/English documentation Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom including demonstration and acceptance, loading, transport, assembly and commissionin ...

Container from 2004, 20 fd standard storage or sea containers from 2004, complete (closed model), left door is welded, signs of wear. 1 available. 40 fd, 6,058 x 2,438 x 2,591 [m] Manufacturer:– Type: Standard container 20 fd Content [m3]: 33,1 Year of construction: 2004 Weight [kg]: 2.250 Dimensions LxWxH [cm]: 6,058 x 2,438 x 2,591

Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

A used rack oven Wachtel Compact 1.8 KHV Stir from 2013 with gas burner is for sale and immediately available in our warehouse in Bielefeld. The stove is fully assembled in our warehouse. Rack Oven Rotary Oven Wachtel Compact 1.8 KHV Stir - Year of construction 2013 - with gas burner - Door hinge on the right - with exhaust hood including fan - with digital control - for 60x80 or 58x78cm trays - Operating voltage: 400 volts -Control voltage. 230 volts - Frequency: 50 Hz - Power 2.5 kW -20 pieces in stock -External dimensions approx.: 158x170x280cm WxDxH Trade-in and delivery possible, further pictures and information on request

Year of construction: 2009 Condition: good (used) Turning length: 1,000 mm Turning diameter: 650 mm Equipment: Documentation/Manual Okuma LU-45 MC-1000, control OSP P200L, turning length 1000 mm, double turret VDI50, A-turret with driven tools 12 pieces, B-turret 10 tool positions, tailstock, touch setter, gradation for oil mist, door automatic, belt filter system with coolant cooling, tool package Footprint 4800 x 3400 mm Delivery: free loaded truck 100% payment before loading upon invoicing. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe both electronically  ...

General SKUR0831 LocationBarneveld MakeMetkon AG (CH) Type6300 ltr. No.3363 Year of construction1991 Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Main Features MaterialStainless steel Volume6300 Ltr. Pressure3.2 Bar Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Capacity6300 ltr Vessel sizesdia. 1980x2300mm Dished topcheck Dished bottomcheck Manholeinspection door dia. 500mm Top connectionsdia. 50mm (4x) dia. 200 (2x) Outletdia. 80mm Max. temperature-30/200 degr.C With jacket(120 ltr) Half coil jacketed1.4306 Max. temperature-30/200 degr.C With propellor stirrercheck Motor1,3 kW. 220/380 Volt (Ex) Speed mixing shaft935 rpm Information Mounted on legscheck Weight1562 Kg Floorspace2,8x2,5 M Total height2,8 M ATEX compatiblecheckPressure vesselsMetkon AGTanks > Pressure vesselsBrand > Me ...

A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: STEEL, STAINLESS STEEL, BRASS, ALUMINIUM Condition: USED - 16 000h Laser Type: Fiber Laser Laser Power: 15 ...

On and off when needed Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power about 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated drive bearings, 0,4 kw ventilator for belt cooling with air conveyor, Steam vacuum vent 4 kW Discharging hopper complete with 200 mm diam. diagonal auger for agglomerated material 1,5 kW drive.size Z x ...

BBA BA200K D300 , , - Machine is unused, -Equipped with floats for automatic switching, - Suction : DN250, -Press : DN300, , MAX capacity : 640m3/h, MAX head : 32 MWC, MAX free passage : 105mm, , for and by: sewage, dredging and shipping, rental companies, seawater, chemical industry, calamities and civil engineering., , Throughput capacity: 640 m3/h, Max dirt passage: 105 mm, Motor brand: Deutz, Max. head: 33 MWK, Max dirt passag: 1800 rpm, Weight: 2650 kg, , = More information =, , Year of manufacture: 2018, Applicable material: Water, Empty weight: 2.500 kg, Height: 140 cm, Cargo space capacity: 10.668 l, Technical condition: very good, Visual appearance: very good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to  ...

Complete signmaking equipment Made in USA for fast producing channel letters! For EU customers we provide FREE SHIPPING to your door! The machines are in operating condition, ready to use. 1. Multifunction Automatic CNC Metal Channel Letter Bending Machine (Flange & Notch functions) CNC metal channel letter bender capable for fully automatic channel letter fabrication, whereby producing cuts, bottom notched flange and bending of channel letters returns. It is capable to make aluminium channel letters with trim cap. We can provide well written manual in English and training on our premises if asked. 2. Norlok Letterlok 4000 Automatic Clincher Machines for Aluminium Channel Letters Norlok Letterlok 4000 Clincher is particularly designed for fastening the letter returns and letter backs. It uses newest technique power to connect metals without drilling, spot welding and  ...

The machine for the production of polyurethane foam (polyurethane foam) MODEL BLCR35 is intended for mixing and feeding a two-component polyurethane system for the production of rigid foam with self-extinguishing properties into a mold (door leaf). The BLCR35 model is a low pressure foaming equipment. The mixing head is cleaned by flushing with a cleaning agent dichloromethane (dioctyl phthalate can also be used for cleaning).

VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual

turning diameter: 140 mm turning length: 170 mm control: Mitsubishi Meldas 635 spindle passage: 42 mm : 140 mm turning speed range - grinding spindle: 80 ~ 8.000 U/min drive capacity - spindle motor: 11 / 7,5 kW : 0,001 ° spindle bore: 55 mm A-Axis: turning speed range - spindle: 60 ~ 6.000 U/min drive capacity - spindle motor: 3,7 / 2,2 kW : 42 mm : 2 pos turret (x-stations): 12 : 2 x 12 pos : 45 ~ 4.500 min -1 Turning Speed of the Rolls: 1 kW rapid traverse X-axis: I 24 m/min rapid traverse X-axis: II 18 m/min rapid traverse X-axis: III 20 m/min rapid traverse Z-axis: 24 m/min total power requirement: 14 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,4 x 1,6 x 2,0 m - CNC control Mitsubishi Meldas 635LCC - Collet holder for main spindle - Pick-up spindle - Collet chuck holder for pick-up spindle - Pick-up spindle indexing - 2 12-position turrets with driven tool ...

Working area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12100 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4 ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 199200 € : 3924.24 € : 4 kW : Manueller Tisch : 20 mm : 10 mm : 12 mm : 6 mm : 10 mm : 3.048 x 1.530 mm : 3048 mm : 1530 mm : 125 mm : 3.048 x 1.524 mm : 127 kg/m² : 90 m/min : 90 m/min : 127 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 6600 kg FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with ...

Offer 22550 Specifications: - Galvanized design with attached crane eyes made of flat iron - Usable inner area approx. 4 m² - Floor load per m² approx. 500 kg - Built-in shelving with three shelves - Inner width 2000 mm - Interior depth 2000 mm - Internal height 2000 mm - Door opening W 1300 x W 1890 mm - Space requirement approx. W 2100 x D 2150 x H 2250 mm - Height with crane eyelets approx. H 2450 mm - Weight approx. 300 kg

HELLER MC16 4-axis horizontal milling center YOM 2000 4-Axis SIEMENS CNC Path Control, Model SINUMERIC 840 D Longitudinal X-axis 630 mm Vertical Y-axis 630 mm Cross Z-axis 630 mm NC rotary table Tilting B axis 360.000 x 0,001 ° Pallet size 400 x 500 mm Max. workpiece size Ø x height 720 x 800 mm Max. workpiece weight 500 kg Pallet exchange time 9 sec. Turning Speed B axis 40 rpm/min Tool holder cone HSK 63 Tool size Ø x lg. x weight 150 x 227 x 12 mm/kg Spindle speeds, infinitely variable 45 – 24,000 rpm Feeds / quick feeds XYZ: 1 – 60,000 mm/min Feed force 10.000 nm Spindel torque 48/72 nm Spindle drive 30 kW Total electrical load, approx. 60 kW - 400 V - 50 Hz Total weight 12.5 tons Accessories / Special Features : -Separate standing 80 position Rack-Type tool Magazine with tool placement door and double Swivel gripper, own SIEMENS PC-Control with screen To ...

A transformer in a SwiBox control cabinet is offered here. It is fully wired with terminal blocks and an Allen & Bradley CAT140-CMN-6300 SER C motor circuit breaker. There are three 4x10mm² cables with open ends. One FLEX-JZ in and two AWM 2587 out. The control cabinet has the compartment with transformer, terminal blocks and motor protection at the bottom and a 19" compartment at the top. The cabinet is 120cm high and 100cm deep. Everything is in very good condition. The front door opens a bit hard. PRI: 3 x 400V SEC: 3 x 208V, 3x60A 50/60Hz

Stainless steel switch cabinet, baying cabinet, 600x2300x600mm TS8452.600, Rittal, used Top Special price The current price of a similar product is € 3.280 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.1, bayed enclosure, TS8452.600, Rittal, used-Top: - Baying cabinet width 600mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. left side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - Incl. Rittal enclosure fan SK 3240.100 and limit switch - In ...

Stainless steel switch cabinet, baying cabinet, 800x2300x600mm TS8450.600, Rittal, used Top Special price The current price of a similar product is € 3.600 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Stainless steel enclosure Nr.3, bayed enclosure, TS8450.600, Rittal, used-Top: - Baying cabinet width 800mm, height 2000mm, depth 600mm, - incl. cable routing shelves (raised floor) 200mm high - total height of enclosure + raised floor + adjustable feet = 2300mm - Material stainless steel 1.4301 - Incl. right side panel, rear panel and front door - Incl. mounting panel St galvanised (we can remove the mounting panel on request) - incl. 1 assembly panel St galvanised in the area of the trans ...

VERTICAL MIXER, 5.000 lt.capacity, total height approx 4.500 mm including transmission group, max Ø 1.800 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 7,5 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power : 7.5

TECDAKI sleever line with GRAHAM steam tunnel Description The Sleevtec300 machine for shrink sleeves (sleves), applies up to 300 units per minute, for a minimum length of 20 mm, these sleeves can be guarantee seals or decorative labels for bottles, cans and various containers, with diameters from 25 to 120 mm . Structure in Stainless Steel and anodized aluminum. Height-adjustable application head according to container format. Circular cutting system. Adjustable parameters via membrane keyboard with LCD screen: - Reading between impressions or macula. - Programmable length. - Outlet speed of the sleeve. - Acceleration and braking ramp. - Application delay. - Partial and total counter. Open door alarm that stops the entire system. External alarm input. Alarm output for peripheral systems. Outer diameter of standard coils of 400 mm. Unwinder with brake and built-in tension ...

Automatic electric machine with easily adjustable and controlled motorized welding bars, by schneider electric brushless motor. Standard double door, standard mechanical closing. Servo-assisted L-bar automation, sealing bar temperature adjustment, 10 adaptable programs, feeding conveyor belt, motorized adjustment of the height of the triangles and of the sealing bar of the product height, adjustable closing as standard for package small products

5-axis CNC vertical machining center Chiron Control system: SIEMENS SINUMERIK 840D Axis travel: X axis 800 mm, Y axis 630 mm, Z axis 550 mm Spindle speed: 12,000 rpm Spindle power (max.): 22.5 kW Torque (max.) 140 Nm NC-rotary round table: Swivelaxis technology with NC-round table by 280 mm, A-axis +/- 110°, C-axis 360° Load capacity of the rotary table (max.): 320 kg Tool magazine: 40 positions Spindle taper: HSK-A 63 Tool: o 75 mm Tool length: 320 mm Tool weight (max.): 4 kg Dimensions Machine weight: 7,800 kg Accessories: Chip conveyor, Direct scales position sensor, KNOLL cooling unit and filter device with filter belt and 900 liter tank, high-pressure cooling 70 bar, preparation for workpiece measurement, touch probe, hydraulic workpiece clamping 200 bar, oil separator, pneumatic automatic opening door, extraction with air filter.

Chain stemmer. Stülpfräe Handle / door lock cutter

Key data: 600 mm, 1000 mm, 4000 1/min

CNC lathe Monforts Type: RNC 5 High-quality high-performance lathe with a wide range of performance in universal 2- to 3-axis machining, with a turning length of 1,000 mm and a circulation diameter above bed of 600 mm. The RNC series meets all requirements; Various spindle assemblies and drive variants, Y-axis, hard turning package, automatic loading and unloading equipment, tool and workpiece measurement, tailstock and steady rest are all options available. Available with Fanuc or Siemens control. Turning diameter 600 mm Turning length 1000 mm Control MCS 800 (Siemens 840 C) Spindle speed 1 4000 1/min Spindle speed 2 4000 1/min Drive power L / R 18/24 kW Torque at the spindle 630 nM C-axis 0.001° Revolver No. 1 stations / of which driven 12/12 VDI 40 Turret No. 2 stations / of which driven 12/12 VDI 40 Speed range - milling 3000 1/min Drive power - milling spindle 8. ...

Key data: 560 mm, 260 mm, 4000 1/min

MHC - Horizontal Pick-up Machine at call The MHC PickUp is a high-performance lathe with automatic tool handling for series production. It can optionally be equipped with bar feeder and with workpiece loading and unloading. The horizontal design allows turning diameters of up to 520 mm and workpiece lengths of up to 260 mm. Optionally available with Fanuc or Siemens control. The technology platform of the MHC PickUp is the Monforts tool machine DNC. The precise, reliable machining of the of the clamped workpiece by turning, drilling, milling via an overhead tool turret. In addition to bar loading, it is optional to equip with fully automatic workpiece loading and unloading. This is particularly important in the high-volume serial production offers significant time and cost advantages because manual In some cases, work steps are eliminated and throughput times ar ...

Marking Hero - Fiber Laser 30W Marking area: 110 x 110 mm Workpiece size max: WxHxD: 550 x 450 x 350 mm Laser Type: Fiber 30 Watt Wavelength: 1064 mm Marking speed max. 7000 mm/sec Z-axis motorized H: 700 mm Repeatability/Lens: +/- 0.001 mm Line thickness min. approx. 0.01 mm Power supply 240 V/50 Hz. External dimensions: 110 x 80 x 200 cm Front door: manual Available in stock from the end of April Price net plus VAT

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

x-axis: 2000 mm y-axis: 1500 mm z-axis: 750 mm burner heads: 1 3 D laser capacity in Watt: 2700 3D laser cutting and welding system TruLaser Cell 7020 Machine no. A0421A0099 Type: L13 standard equipment - X = 2000, Z = 750mm, B = +/- 135°, C = n x 360° - Laser TruFlow 2700 - Position laser diode - Stationary, rotatable pendant control panel - Teach panel - Teach software - Magnetic clutch, head detection - Laser power control - Power Cycles - Logbook function - focus line - Nitrogen jet aeration - Network connection including installation via teleservice - Analog modem for teleservice - Lighting boom - Documentation twice Deviating from this standard equipment or in addition the machine TruLaser Cell 7020 is equipped with: With the following configuration: Frequency 50Hz Voltage 400 V0 Electrical regulation IEC Language operating instructions German Number of operating instructions 2 p ...

turning diameter: 850 mm turning length: 1500 mm control: Siemens 840D centre distance: 1500 mm centre height: 450 mm turning dia. over face-slide: 690 mm spindle diameter: 200 mm spindle passage: 128 mm power capacity: 65 kW turning speeds: 7-1950 U/min Torque: 7908 Nm rapid traverse: 10 m/min x-travel: 510 mm z-travel: 1480 mm Tool changer: ja workpiece weight: 800 kg total power requirement: 110 kW weight of the machine ca.: 17,5 t dimensions of the machine ca.: 11 x 4,2 x 3,3 m CNC turning and milling center Max Müller MDW 20 M C axis Driven tools Tool changer Tool magazine Automatic sliding door on the left Oil mist extraction Belt filter system The machine is technically and optically in very good condition. A viewing and demonstration is possible by appointment. The technical Data is manufacturer or operator information and therefore for us not binding. We reserve the right to m ...

Briquetting machine make Por series A 6 Complete with 36 sleeve filter, aspirator and connection ring to the machine Engine power HP 10 (kW 7.5) Briquette diameter 60 mm Maximum briquette length 50 mm with flat punch Number 14 cycles per minute Production 0.819 m3/h (+/- 10%) with maximum humidity 17% (purely indicative data which may vary based on the physical structure of the material) Dimensions: Height 1430 mm / Front 1660 mm / Depth 1100 mm / Weight 760 kg Inspection door with viewer Automatic start/stop level sensor Electromechanical panel

Lockable flap, full view door WIELAND Type V4 R9.211.0170.0 Size: 100 x 80 mm lockable, 2 keys New ! Dimensions (flap): 102 x 82 x 31 mm Dimensions (packaging): 110 x 85 x 37 mm