door used for sale

-rack oven Winkler Compact -for 58x78cm trays -with gas burner -with drive-on ramp -Door hinge on the right -analogue manual control -Electrical connected load: 3kW

Used electrically heated rack oven WP Rototherm for 58x78cm trays immediately available in stock. -Model: REC 1020 -for 58x78cm trays -with exhaust hood -with digital control -with drive-on ramp -Door hinge on the right -Year of construction: 1999 -Fuel: electric -Electrical data: 48 kW 400V / 230V 50Hz

-rack oven Winkler Compact -for 58x78cm trays -with gas burner -with drive-on ramp -Door hinge on the right -analogue manual control -Electrical connected load: 3kW -Year of construction: Ü08/ 2007

rack oven Wachtel Compact 1.8 Revolution from 2015 with gas burner and 2 rack trolleys with 18 shelves each for 58x78cm baking trays. The stove is completely assembled and immediately available in the warehouse in Bielefeld. Trade-in and delivery available, more pictures and details on request. -Year of construction 2015 -with gas burner -Door hinge on the left -with exhaust hood including fan -with digital control -for 60x80 or 58x78cm trays

Aluminum Casthouse for sale:, Tilting rotary drum oven MASTERmax-: 3TB9, Capacity: 9 to 19 tons., Burner power: 3 MW, Electrical connection load: 88 kW, Typical power consumption: 400 - 450 kWh/t. for mixed scrap, Throughput: up to 70 t. Scrap/day/3 shifts, Complete with 2.0t linear charging machine. load, automatic natural gas/oxygen burner, weighing system and SIEMENS SIMATIC S7 PLC control., 2 pieces – spout distribution channel from the rotary drum oven to the holding ovens, Striko Westofen holding oven HR-T 10,000 500, Capacity: 10 tons, Burner: 3 gas/air burners with a total of 1.3 MW Melting capacity: 500 kg/h, Electrical connection load: 23 KW, Complete casting furnace for alloying and casting with ramp for charging ingots and alloying elements, automatic bath temperature control, flushing blocks with nitrogen/argon flow control, hydraulic manual tilt and SIEMENS SIMATIC S7 PLC ...

turning diameter: 410 mm turning length: 800 mm greates pass round over bed: 700 mm control: Heidenhain ERGOline spindle passage: 0 mm spindle speed:: 25- 5000 U/min spindle motor: 25 kW max. torque on the spindle: 280 Nm no. of tools in turret 1: 12 VDI 40 driven stations: 12 VDI 40 speed of driven tools: 4000 U/min drive milling spindle: 5,6/ 11,3 kW y-axis: +/- 60 mm sup spindle: 15 kW Spindlespeed subspindle: 20- 6000 U/min rapid traverse: 30/22,5/30 m/min tail stock: Gegenspindle/Subspindle range L-W-H: 4,7 x 2,7 x 2,0 mm weight of the machine ca.: 6,5 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck SMW 315 BH main spindle - 3 jaw chuck SMW 250 BH sub spindle - chipconveyor - oil mist collector LTA - automatic door - coolant pistol The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The U2PRW mitre and drill is designed for processing slats and furniture fronts made of solid wood or MDF. The machine tool operates in a semi-automatic cycle. During one cycle, the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in a jammed plane or edge of the element. – made in Poland TECHNICAL PARAMETERS: Max. height of the material to be cut: 60 mm Max. width of the material to be cut at an angle of 45° 70 mm Max. material width at 90° 150 mm Max. length of cut material 2200 mm Min. length of cut material at 45° 455 mm main saw diameter 250 or 300 mm scoring diameter 100 mm Max. bottom cutter diameter 35 mm Max. bottom milling depth 15 mm seating diameter of face drills and bottom milling cutter 10 mm Drill head (face drilling): 4 spindles spindle axial spacing 32 ; 32 ; 40 mm Linear spindle system Max. face d ...

BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1880 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...

Work table, baker's table, mobile with beech wood worktop 2 x Drawer block left and right centre with hinged door and intermediate floor Stainless steel Approx. dimensions: 2000 x 800 x 900 mm, WxDxH Occasion

In stock, In stock, Warranty 12 months -Temperature max: 300°C -Inside WxDxH 1000 x 1000 x 1500 mm -Capacity 1500 liters -Control Eurotherm Nanodac (controller and recorder) -Color Panel -Entry lanes -Exhaust fan -Recirculating fan -motorized exhaust air and supply air flaps -Security door switch -Heating capacity 24 KW -Connection 400 V , 3 phase -not suitable for solvent-based substances -incl. documentation, CE declaration Also available with other features as a new device. Delivery time approx. 9-10 weeks! Give us a call!

nominal power: 29,8 kW; air flow: 2400m³/h; combustion chamber depth: 580 mm; slide-in door: 330 mm x 330 mm; designed for room volumes: ca. 600 m³; aproximate surface to heat up: ca. 120 m²; floor space: 600 mm x 800 mm x 1900 mm; weight: 230 kg; diameter flue pipe: 160 mm; hot air delivery pipes: 2 x 200 mm; modes: automatic and manual; Chimney guideline value: 200 mm;

nominal power: 49,9 kW; air flow: 4900 m³/h; combustion chamber depth: 650 mm; slide-in door: 370 mm x 350 mm; designed for room volumes: ca. 1000 m³; aproximate surface to heat up: ca. 220 m²; floor space: 720 mm x 1000 mm x 1900 mm; weight: 300 kg; diameter flue pipe: 160 mm; hot air delivery pipes: 2 x 200 mm; modes: automatic and manual; Chimney guideline value: 200 mm;

Key data: 650 mm, 600 mm, 500 mm

CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of construction: 2003 Travel : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable With the following accessories: NC Swivel Rotary Table Ø 630 mm Vertical tool changer with 32 magazine slots Linear axes standard version Coolant system Manual Cab Door , Manual Cab Canopy Laminated glass - safety pane Electr. iTNC handheld control module 3 D Probe Heidenhain Spindle Oil Cooler Chip Sweeping Gun Modification SRT 630 paral. T –Grooves 14 H7 4 Pieces of Height Adjustable Machine Shoes Operating instructions

HAAS VF-1 CNC vertical machining center built in 2014 in the United States is distinguished by its excellent milling precision and accuracy, making it able to stand up to even the most intensive production requirements. This highly efficient and reliable machine features a robust, steel design with compact dimensions that effectively dampens any vibrations and ensures maximum stability of the machining process. Behind the sliding door, there is a large work area with a T-slot table, a 20-position tool magazine and a powerful spindle. All tools taken from the magazine are continuously measured by a measuring probe to prevent damage or tool breakage. The HAAS VF1 vertical milling center is also equipped with an intuitive HAAS CNC control that allows the creation of machining programmes in just a few steps. The VF-1 CNC machining center weighs 3539 kg. Technical specifications of the  ...

GeneralUniversal Turning Machines; Control: Siemens 840D SL Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTransverse stroke182,5 mmTurning diameter200 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmMain drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWTorque (100% DC)112 NmSpeed range- 5000 rpmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...

GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Cross450 mmLongitudinal500 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-18000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre ...

Code: 0195 Brand: FRAMAR Model: MBO-T9 - CE Standard Electronic horizontal chisel mortising machine for slots of different lengths and depths for window, shutter, balcony and door posts - CE Standard Technical data Tool motor power Hp 3 Hydraulic system motor power Hp 0,5 Worktable longitudinal stroke mm 350 Worktable transversal stroke mm 150 Head vertical stroke mm 80 Worktable dimensions mm 1000 x 250 Worktable height mm 850 Programmer and display for reading data and storing the various programs inserted N° 4 hydraulic pressors for clamping the pieces Aluminium guides with compensating stops Overall dimensions mm 1400 x 1200 x 1200 h Weight kg 580

CHICKEN GRILL ALTO-SHAAM - AR-7EVH ,HAXEN- CHICKEN GRILL approx. 28 chickens Professional Grilled Chicken Oven with Rotisserie Function Mountingfree-standing Number of furnaces / chambers 1 Makes perfect cooking the center of attention. The AR-7EVH electric rotisserie oven can be displayed anywhere in the customer's field of vision, without the constraints of the necessary hoods. It has an integrated ventilation system that has been fully tested and certified by UL for safety and hygiene. A powerful CFM fan pulls steam and smoke out of the furnace chamber to filter out greasy fumes, smoke and odors. Checked cleaned New Door seal

FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 400 mm - filtering surface 1.206 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (45mm + 8mm), - Nr 1 discharge slide (under the valve), - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the various power supplies, - Machine status reporti ...

FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 500 mm - filtering surface 1.916 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (45mm + 8mm), - Nr. 1 discharge slide (under the valve), - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the various power supplies, - Machine status report ...

FULLY AUTOMATIC DOCTOR BLADE SCREENING SYSTEM, Materials filtered : PP-LDPE-LLDPE-HDPE-PS-EPS-XPS-ABS-TPU, Components and technical features, - Filter diameter 700 mm - filtering surface 3.807 sqcm, - Machine central body derived from a single piece, - Electric motor and gearbox, - Nr. 2 scraping impellers for scraping operation complete with blades, - Nr. 2 Breakers for scraping operation (80mm + 8mm), - Nr 1 discharge slide (under the valve), - Nr. 2 hydraulic pistons for lid opening, - laser screens from 60 to 300 my (mesh from 230 to 50, - Punched screen from 400 to 2.000 my (mesh from 40 to 10), Electrical panel adaptable to UL/CSA standards, - 1 inverter for motor management, - 1 filter for inverter, - 3 thermoregulators and static relays for resistance management, - 3 thermocouples, - 2 interceptors with Melt probe for alarm and cleaning management, - Fuse protection for the vario ...

GeneralHorizontal machining centre - Horizontal milling head; Control: 3D-Control Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmPackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)CabineFull protection cabinDirect measuring systemDirect path measuring systemNC swivel rotary tableNC swivel rotary table with pallet carrier max. table load: 600 kg / 1,323 lbs rotation B axis: 360° swivel range A axis: 25° / -200° range X / Y / Z-axis: 800 x 1,095 x 1,050 mm / 31.5 x 43.1 x 41.3 in axis kinematics A / BRotary pallet storage RS 12Rotary pallet storage RS 12 incl. 10 ...

I sell the vacuum wood dryer ISVE for about 5m3 of wood. Chamber Long 6m x Dia. 1,60m Trolley system. Wagon and plate condition very good ! Door to one side. Condition very good, worked very little Trolleys, plates and fans without any problems. Available soon.

COMAFER briquetting machine model DINAMIC 70/200: - briquette diameter 70mm - hourly production from 100 to 200 kg/h - hydraulic power unit HP 12,5 , volt 380 - loading hopper diameter D=1200mm - with inspection door - with level probe - Overall dimensions approx. 2 x 1.3 m x H=1.5 - weight about 1400 kg - year 1996 , CE standards AVAILABILITY FROM APRIL 2024

Mazak OPTIPLEX 3015 NEO 10kW Beam Shape Laser Cutting Machine + Automation Loading and Unloading System with 8 Regall Bearing Locations CST3015 Publisher: Mazak Type: OPTIPLEX 3015 NEO 10kW Beam Shape Year of construction: 11/2022 Commissioning: 05/2013 Condition: New, Exhibition Machine Availability: Immediately, by arrangement Operating hours (as of 01.2024): – CNC Power On Time approx. 636h – Laser Power On Time approx. 287h – Auto Operation Time approx. 60h – Auto Cutting Time approx. 19h – Cutting time approx. 17h Scope of delivery complete incl. installation and commissioning (Mazak Germany): – Basic machine with laser resonator Beam Shape CFX-10000 (10kW) – Built-in nozzle camera – Conveyor belt for material scrap – Zus. Laser protection screen (side 1) – Zus. Laser protection screen (side 2) – Oil mist mist – Roller lift table (ma ...

CNC Press Brake LVD PP 135/42 MNC 95 LVD 4-axis CNC press brake, 4000mm 135 tons, year of manufacture:1993 Installed power: 14KW. The machine is in perfect working order. It is equipped with a Safe laser (to increase productivity). It is fitted with a servo-controlled door providing safe access to the rear of the machine. The following spare parts are supplied with the machine (complete numerical control, motor/variator for the stop axes, incremental rulers for the Y axis). The machine is sold without tooling (possibility of trial runs with our tools).

CNC laser cutting Bysprint 3015 Bylaser 2200 used very little, only for prototyping. Working range: X-axis - 3000mm Y-axis - 1500mm Z-axis lift - 70mm Machining accuracy: VDI 3441 machining tolerance ± 0.1 Finding tolerance ± 0.05 Edge detection accuracy: Detection tolerance ± 0.05 Finding tolerance ± 0.2 Load bearing capacity: Interchangeable lifting table 890kg Fixed plate table 3500kg Power supply to the machine: Three-phase, + PE 50/60Hz electrical connection. Machine: cos. 0.91 , 100AT , 4 poles 3x400/480V Air emission filter: cos. 0.8 , 25AT , 4 poles 3x400/480V Cooling water: Water flow rate 95 Water starting temperature 19°C Water temperature constant ± 1 K Impurities

Stainless steel work table with drawers and can opener with sliding door 2.00x1.00x 0.80m On behalf of the customer

Tool trolley with drawers and tool set HBM MACHINES GREYLINE article number: 9404 width ( without handle ): 800 mm depth: 460 mm height: 820 mm ( without castors ) Material: sheet steel 6 drawers: width: 540 mm, depth: 400 mm, height: 70 mm drawers with 245-piece tool set 1 drawer: width: 540 mm, depth: 400 mm, height: 200 mm drawer is damaged ! left side with perforated wall, right side with storage compartment with door further damage to the handle and the upper shelf 2x swivel castors with parking brake, 2x fixed castors used, tested ! Tool set as good as new ! Dimensions: 880 x 500 x 970 mm

Mori Seiki NL 2500 SMC. Year 2008. 5-axis machine. Subspindle. Turret with 12 stations, all of them motorized. C axis on both spindles. Integrated main head motor 18.5 KW. Integrated 11 KW sub-spindle head motor. Direct motor powered tools 5.5 kW. Engine starting torque 640 N/M. Motors without belts or steps. Main head size A2-8. Secondary head size A2-6. Bar pitch 80 mm. 250 mm main spindle plate with metric system. 170 mm subspindle plate with metric system. Prismatic guides on all axes. Main head speed 4,000 rpm. Motorized tools speed 6,000 rpm. Turning diameter 755 mm. Machinable diameter 365 mm. Machinable length 755 mm. Oil cooler for both Daikin heads. Mapps 4 conversational automatic scheduling system. Automatic effort control and tool consumption monitor. Rapid movement speed 30 m/min in the X and Z axis. Turret change indexin ...

Used overhauled Compressor Siad Low and High pressure System for 1850 CBM Used Compressor SIAD Impianti Booster compressor completely overhauled in 2022 like new and ready for delivery Machine has 1850 CBM of power Complete replacement of the Baty and replacement of bands bearings gaskets valves ATLAS Copco ZR4 screw overhaul with replacement of air filter oil filter and vapor filter ACS Z oil shuttle KIT intake KIT exhaust silencer filter flexible coupling replacement greasing of engine bearings and general compressor control The Booster equipment has been overhauled to be immediately reused by any purchaser who has an immediate need The machinery is guaranteed a 12 month or 2000 hour warranty on all replaced components Only HP LP tank and dryer need to be added The two machines Booster equipment and LP compressor Atlas were purchased by the same company where they increased its compres ...

New Palletizer ROBOT ARM PALLETIZER Automatic palletizing group specially designed for high speed applications with Fast Pack Formation Table at High Elevation Speed suitable for 72 000 cans hour line for 250 ml slim cans with 6 4 configuration on 1200 1000 mm pallets Package infeed height H 2000 mm Designed for pallet dimensions 1000x1200mm Max standard pallet height 1900mm Pallet transfer height H 500mm Machine is composed of Fast Pack Formation Table at High Elevation Mechanism to turn packs automatically at inlet of the palletizer according to the predetermined configuration of each layer It is controlled by the PLC and The device is equipped with a turner which turns the product of 90 if required Intermediate Table Consists of conveyor table a product pushing device to pallet lifter Driven by a geared motor The translation of the layer from the performer to the palletiser is carried ...

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](https://www.germanplast.eu/listings/4115725-drying-system-for- vertical-mixers)

INDUSTRIAL CONFIDENTIAL SHREDDER Type: Single-Shaft Shredding System Manufacturer: ERDWICH Model: M400/1-400 Condition: Used, very good condition, serviced. Power: 2.2kW 400v 50Hz 3Phs Screen Perforations: 12mm Description: Premium German designed and built heavy-duty, industrial, single-shaft shredder. Used for the size-reduction, destruction of confidential documents and materials, such as identification card and passports. Principle of Operation: Fully self-contained size-reduction solution, material is loaded, via the gas strut assisted door, at the top of the shredder. Material is shredded by a series of cutting tools, mounted to a rotor which passes through a static knife until small enough to pass through a perforated screen and discharged at the base of the machine. The shredder has both pneumatic pusher ram (introducing material to the rotor) and H²0 misting ( ...

01 Product to be filled CSD 02 Type of Bottle RoundBottles 03 M O C of the Bottle PET Bottles 04 Fill Volume Bottle sizes 500ml 05 Type of Caps Screw Caps 06 Type of Labels BOPP 07 Output required 416 Bottles Per Minute on 500 ml BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION Used blow molding machine for PET bottles with production capacity up to 25 000 bph with the 500ml format Year of construction 2007 Used blower complete with Octagon tipper Air recovery system preform hopper This machine is immediately available for sale and in case of request we can carry out pre production maintenance Detached from production in fully functional status is excellent opportunity for used equipment We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request Air conveyor system NEW used revised 2024 NEW RINSER FILLER SCREW CAPPER SPORT CAPPE ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mm4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pocketsMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingDrive power (100% DC) 28 kWSpeed range - 18000 rpmTorque (40% DC) 110 NmTorque (100% DC) 84 NmDrive power ( ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Cross600 mmLongitudinal560 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mm4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapersMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingDrive power (100% DC) 28 kWSpeed range - 18000 rpmTorque (40% DC) 1 ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mm4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapersMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingDrive power (100% DC) 28 kWSpeed range - 18000 rpmTorque (40% DC) 1 ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mm4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapersMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingDrive power (100% DC) 28 kWTorque (40% DC) 110 NmTorque (100% DC) 8 ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinDirect measuring systemDirect path measuring systemNC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine)Table surface 400 x 400 mm4. Axes (swivelling range) 360 x 0,001 degreeMaximum load (table centre) 500 KgTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapersMotor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active coolingDrive power (100% DC) 28 kWTorque (40% DC) 110 NmTorque (100% DC) 8 ...

VERTICAL MIXER 20 m3 capacity, total height approx 7.000 mm including transmission group (can be customized), max Ø 2.400 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, max electric level indicator, paddle type, automatic lubricating kit, electric motor 15 kw, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance, drawings and instructions manual in English., Possible additions: wheeled slide, feeding screw and hopper, extraction auger, b ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 30.000 lt. (or bespoke) vertical mixers which fill each other through the endless screw conveyor., for each mixer :, total height approx 9.500 mm including transmission group, max diam. 2400 mm.(standard transport) - 2 x LKW for the whole system, constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, loading hopper with conveying screw, bottom discharging on the other mixer, side discharging pipe to big bag with valve mm.at 2.500 mm from ground, electric level indicator, paddle type, electric motor 22 kw, complete with cont ...

Our VERTICAL MIXER 5 to 30 m3 are used to blend different batches of one material and grant a more homogeneous quality within one lot., Please see our attached [PDF](https://drive.google/file/d/1kQKOuxvrbrpfSZBrVxh2jrXbJ7StrQMp/vi ew?usp=drive_link) and photos for different sizes availables., Another important task they are used for, is to complete cooling of materials after a heat related process, like regranulation or agglomeration, in order to avoid the possibility that materials, due to residual heat, clog into lumps., Our standard mixers for plastic materials are constructed in sturdy electro-welded steel, painted on the outer surface with an anti-rust layer and a protection coating. Installed in a sheltered, dry place they will perform at their best for years ., - inner auger diam.350 mm., - lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover,  ...

Nakamura Take WT 300 MMY. 2 turrets. 2 twin heads. 9-axis controlled turning and milling center. Facing headstock machine. Upper turret with Y axis with +- 60 mm. Lower turret with C-axis driven tools. Both turrets with 12 stations each and all of them motorized. Possibility of setting with 24 tools in each turret. Motor power of both heads 15 Kw. Power of milling motors 5,5 Kw. Speed of both heads 4.000 rpm. Speed of motorized tools 5.000 rpm. Bars loader of 1,5 meters. Interface for any brand and model of loader. Front bucket type parts collector installed in the door. Rear parts collector gantry robot type with 3 Kg. capacity clamp. Cutting power 320 N/M. Distance between heads 980 mm. MQ system for tool clamping. Main spindle bar pitch 70 mm. Size of heads A2-6. Rapid traverse speed 25 m/min in X and Z axes. Indexing time for turret chan ...

GeneralUniversal Turning Machines; Control: Siemens 840D SL Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke160 mmLongitudinal stroke450 mmClamping chuck diameter max.210 mmMain drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore68 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist extra ...

Single-shaft shredder particularly suitable for secondary shredding, granulation of pre-shredded material. Application: Commercial waste for thermal or recyclable recycling, e.g. paper, cardboard, art and foams, rubber, leather, textiles, floor coverings. etc. Lindner Komet 2800, overhauled machine 02/2024 Year of construction 2015 Control cabinet with FÜ ABB, dustproof with dry cooler Control panel: new Drive motors : ABB 2x160 kW Paint New/RAL: 5003/7001 Rotor bearings/squeegee/shaft seals : new Wear plates: stainless steel R+L New Knife holder: new All knives/screws : new Sealing ring rotor: new Sealing ring wall: new Terminal strip top: new Terminal strip bottom: Refurbished Counter knife carriage: Recycled Scraper comb beam with sheets: new Gaskets, brackets, bolts, locking bolts: used very well preserved Adjustment screws (counter knife, scraper comb): new Slidi ...

Paint Booth Drying Booth Paint Spraying System Manufacturer: LUTRO Interior dimensions: LxWxH = approx. 750x500x400 cm Bolted steel construction with sandwich panels Room volume: approx. 150 m³ 2 exhaust walls on the front side as well as supply air ceiling with 4 fields 4 explosion-proof luminaires on each side, 4 fluorescent tubes each Front fully openable with segment door Lid of the cab can be opened in the middle to the entrance with overhead travelling crane 2 entrance doors on the side complete with control cabinet Extraction motors, etc. Heating system for heating the supply air Airless Sprayer

HAMLET - E35 Control - CNC Center height: approx. 200mm Center width: approx. 950mm Max. circulation over bed: approx. 410mm Max. circulation over face cuts: approx. 200mm Max. circulation offset approx. 440mm Max. workpiece weight: approx. 900kg Speed range from approx. 1-3000 rpm Two speed gears Spindle head according to DIN: 55027 Spindle diameter: 90mm Spindle bore: 54mm Schunk/Rota lining: approx. 200mm Flat stroke: approx. 230mm Longitudinal stroke: approx. 950mm Multifix with inserts Chisel cross-section 25x25mm Tailstock quill taper: MK 4 D33lx09vs Coolant system Sliding door/feed guard Dimensions: LxWxH 2.3x1.4x1.7m Machine weight 2100 kg

Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...

General SKUR1226 LocationBarneveld MakeAlpine Augsburg (D) Type710-CW No.15972 Year of construction1974 Main Features Motor55 KW Inlet diameter710 mm Specified Features - Pin Mill Pin disc millcheck 2 Driven rotorscheck Rotor size710mm Number of pins on house side:186 Number of pins on door side:278 Pin diameter10mm With hoppercheck Inlet120x400mm Feeding with rotating valvecheck Motor(2x) size unknown ca. 55 kW each Pin Mills MaterialMild steel Information Floor space2,2x3,5 m Weight5000 Kg Floorspace2,3x2,2 M Total height2,3 MPin MillsAlpineMills > Pin MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!