domino a used for sale

different Stapling and stitching machines Agrafix - Hohner - Berhmer - Grapha, in good condition, available immediately

Riveting machine (2 heads) Arno Model 105 Year 1980 Head distance 30 - 450 mm Available direct

Reinbacker- rope turning lathe chuck up your part- twin routers transverse your material as lathe slowly rotates your material several passes give you a straight or tapered spiral like a rope turning or straight or spiral flutes

1300 KW KK&K CFR3 G5A tandem condensing steam turbine 40 bar inlet pressure from 1997 with 50.000 running hours in very good working condition for sale. Scope of supply: controlpannel, turbine with generator, documents. turbine: KK&K type: CFR3 G5A el. power: 1300 KW steam inlet pressure: 40 bar manufactured: 1997 generator: AEM type: SE 500 M4 powerrating: 1830 KVA volts: 400 volts Hz: 50 Hz price on request: Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2014 Serial number 50229 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  More items - new and used - can be found in our shop! International shipping costs on request!

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108217o and the serial number is HT451218. The spare part number is 325766. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2002, has a rated speed of 40200 rpm and is cooled by oil. Please do not hesitate to contact us with any questions or for more information. We look forward  ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108217o and the serial number is HT453586. The spare part number is 325766. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any q ...

Used Kiener Skinetta ASK 450 Overwrap / bundle machine Manufacturer: Kiener Skinetta GmbH ( Germany ) Type: ASK 450 Year: -83 / -89 Control panel Multi-tier Speed: up to 25 cycles / min. Leaflet feeding unit Infeed conveyor: 1200 mm x 180 mm Steel rod conveyor 1000 mm x 450 mm Film width: 40 - 450 mm Film material: PE,PP Sealing width: max 450 mm Sealing height: max 290 mm Power: 380 v., 5 kW Air: 6 bar Heat blower 4 pcs Overall dimensions: 1300 mm x 110 mm x 1900 mm Weight: 300 kg

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108218o and the serial number is HT453186. The spare part number is 325767. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The Model TPS57E01 was manufactured in 2002, has a rated speed of 40200 rpm and is cooled by oil. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any ques ...

Alternative, new box bellows for Trumpf L3030 Siemens -from German production (it is not an original by Trump) -Y-axis (C) -Mapping: Trump ID: 1667805 / 939016 -New part

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model TPS57E01. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1108218o and the serial number is HT450595. The spare part number is 325767. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The TPS57E01 model has a rated speed of 40200 rpm and is cooled by oil. The nominal power in kW is not available (nv). Please do not hesitate to contact us with any questions or for more informat ...

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2013 Serial Number 50138 Weight 1900kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1107605o and the serial number is HT497310. The spare part number is 547404. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The model RR131-14 was manufactured in 2008, has a rated speed of 75000 rpm and is cooled by water. The nominal power in kW is not available (nv). Please note that there is a small damage to the  ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1104951o and the serial number is HT408414. The spare part number is 228455. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a rated speed of 75000 rpm and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any ...

For sale is a completely overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent condition, almost as good as new. The internal reference number or SAP no. is 1112574o and the serial number is HT456448. The spare part number is 243318. We kindly ask you to check that this spare part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a rated speed of 75000 rpm and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv). Please do not hesitate to contact us with any ...

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

Alimak TPL 2000D Transport Platform  Brand ALIMAK HEK Type TPL 2000D Year of construction 2015 Serial number 50386 Weight 1850kg Overall dimension L 1500mm Overall dimension W 3200mm Power connections: 400 V, 50 Hz, 3 Ph.; Nominal power: TP 2x3.8 kW, MH 2x7.6 kW; Nominal current: TP 15.4 A, MH 30.4 A; Connected load: TP 10.8 kVA, MH 21 kVA; Fuse: 32 A Payload (kg) 2000 Number of people max. (including payload) TP Mode 7 Number of people - MH mode 0 Lifting speed (m/min) Operating mode TP 12 Lifting speed (m/min) MH Mode 24 Max. lifting height (bound) 100 m Max. distance (m) 7.5 Max. overhang (m) 4.5 Max. height of 1st guying (m) 6 Mast type triangular 350, tubular steel  You can find more transport platforms - new and used - in our shop! International shipping costs on request!

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

Screw cylinder 90 mm

82MW ISO rated combined cycle power plant. The plant’s main equipment is composed of a Rolls Royce Trent 60 DLE Gas Turbine (also known as the SGT-A65), a Nooter/Eriksen HRSG, and a Siemens SST-300 Steam Turbine. These are below; 1. Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; · Manufactured in 2016, delivered in August 2017. Never used. · 65.9 MW(e) ISO · 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate · DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas · Cold start to full power in under 10minutes · 50Hz, but easily convertible to 60Hz · Engine still preserved in original shipping container · An aero derivative gas turbine 2. HRSG is licensed by Nooter Eriksen USA; 3. Siemens Steam Turbine Generator SST-300 C2S/C160; · Manufactured in 2016 · Output 15.75MW ISO · Speed 7059 RPM · Admi ...

Product series: ACS550-01 Product main type: ACS550 Enclosure class: IP21 Invoice description: ACS550 ACS550-01-195A-4 Pn 110kW, I2n 195 A IP21 Motor: 110/90 kW EAN: 6410038058357

No.: 2324 1 used strand-pelletizer Alphatec type AS-G 200 E year 2019, very good condition - lab / demo use only working width: 200 mm drive 7,5 KW – AC frequency controlled cutting rotor with hard-metal teeth pneumaticm pressure roller device Machine is ready for demo. More strand-pelletizer ex our Stock available: Scheer, Automatik, Rieter, IPS, AlphaTec, Pelltec, .. Our actual machine stock-list you can find on our Homepage: plasticotrading.de

Gr. Grinding length: 620 mm gr. Grinding width: 250 mm table size: 200 x 620 mm grinding wheel dimensions: 200 x 220 x 51 mm Electr. Supply: 380 V, 1/1.8 kW space: 1650 x 1450 x 1800 mm weight: 1350 kg

Length: 600 mm Width: 300 mm

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Aasted Type: AT 2000 disc tempering machine for chocolate YOM: 1971 output: from 750 to 2.000 kg/hour. electrical: 380/400 VAC different: working order I offer this machine in as-is where-is condition

Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)

ALMiG Direct 75 Screw Compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class due to its unique design concept and can thus be used in a variety of ways. These fixed-speed compressors are particularly suitable for use as base-load compressors. Separation system - highest compressed air quality through proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. There are hardly any limits to communication about the possible connection to it.  Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Radiator unit - large radiators for the lowest compressed air outlet temperatures and optimum coolant temperatures System fans - powerful, efficient, powerful Drive motor - robust drive motor designed for reserve ALMiG D ...

ALMiG Gear 132 Screw Compressor The screw compressors of the GEAR series are particularly suitable for very high compressed air requirements.  The maintenance- and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is almost loss-free with an efficiency > 98% and protects the drive. In addition, highly efficient separation of the coolant enables a minimum residual oil content of only 2–3 mg/m³. Due to the encapsulated design of the gearbox set, these systems are suitable for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with strong power reserves Virtually loss-free concept with efficiency > 98% Maintenance- and service-friendly drive concept  ALMiG Gear 132  Yea ...

Vacuum deaerator that removes dissolved or entrained air, prevents oxidation of product and eliminates color and flavor changes. Can be used for liquid products like milkproducts, fruit juices, soft drinks, sauces and so on. Including: Vacuum pump Sihi, (type: LEMA50), product discharge pump, APV WI + 55/35-220 190. Trimod Besta level sensor , interconnecting piping. Including control cabinet with Siemens S5 plc and HMI. HMI programm is running, PLC programm fails. YOM 1997, excellent condition.

Manufacturer/manufacturer: Arburg Typ/type: 420C 1300-250 Year/year: 1999 Control/controller: Selogica Clamping force/clamping force: 1000 kN Holmabstand/Dist.Betw.Tiebars: 420 x 420 mm Disk size/platen size: 605 x 605 mm WZ height/mould hight: min 250 mm Opening/opening stroke: 500 mm Plate distance of max/Max open daylight: 750 mm Auger/screw size: 35 mm Stroke volume/shot volume: 144 CC / 132 gram PS spec. Spritzdr / injection pressure: 1820 bar General / General Engine power: 18.5 kW Heating/heating power: 6,5 kW Dimensions/dimensions: 4.3 m x 1.7 m x 1.8 m Weight/weight: 3180 kg Screen text/language: German/English Additional equipment/additional equipment Core puller / core pulling: x 1 Robot

A generally overhauled blower type GMb 039 is offered.

1 of used bag-in-box filler, make Alfa Laval, type Piccolo, semi-automatic, new 2011. With nitrogen connection. Used for filling apple-juice and wine in 2 and 3 liter bags with Vitop caps.

PLUNGE EDM MACHINE AEG 443 B C AXIS X-AXIS STROKE: 1000 MM Y-AXIS STROKE: 600 MM Z-AXIS STROKE: 500 MM

PLUNGE EDM MACHINE AEG ELBOMAT 333 P ALEXTA DISPLAYED X-AXIS STROKE: 414 MM Y-AXIS STROKE: 292 MM Z-AXIS STROKE: 360 MM

PLUNGE EDM MACHINE AEG ELBOMAT 402 M DISPLAYED GHIBLI X-AXIS STROKE: 290 MM Y-AXIS STROKE: 160 MM Z-AXIS STROKE: 150 MM TABLE: 550 X 400 MM MAX HEIGHT PIECES: 300 MM MAX SIZE PIECES: 750-545 MM

Transformer station transformer engmx

PLUNGE EDM MACHINE AEG ELBOMAT 944 X-AXIS STROKE: 818 MM Y-AXIS STROKE: 326 MM Z-AXIS STROKE: 305 MM

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

Areva Teleperm XS Control Cabinet Standard body technology For the construction of Teleperm XS systems, Control cabinets of type SC 9422 (2200 x 900 x 400 mm deep), protection class IP30, are used. The cabinet is equipped with cable interceptors with umbrella rail. The cabinet is designed for seismic loads. Cable entry and power supply is generally done from below. In the standard cabinet, the subracks are mounted in the middle area. To the left and right of this are areas for mounting cabinet connection elements and transceivers. Terminals are used to connect peripheral cables. Other connection technologies such as Maxi-Termi-Point are also possible. Field cables are to be shielded with wires twisted in pairs. Buses are implemented inside a cabinet via conventional cables, outside the cabinet via fiber optics. Teleperm XS is suitable for systems with surface earth ...

Valve matrixes, completely mounted with switchboards, IFM proximity switches, wiring, etc.in very good condition, was in operation until March this year. Island 1 consisting of 25 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 5x5 configuration. 37 pieces A-L SRC valves, different types, DN65 and DN50. 4 pieces A-L LKAP valves Island 2 consisting of 24 pieces A-L SMP-SC spillage free mixproof valve, DN65, double seatlift and flush on lower seal, in 6x4 configuration. 24 pieces A-L SRC valves, different types, DN65 and DN50. 5 pieces A-L LKAP valves

High speed mixer granulator Aeromatic PMA 1800 Gross volume 1800 Lt. Normal working volume 1500 Lt. Average granulated batch weight 825 Kg Impeller speeds 59/118 rpm Impeller motor capacities 60/75 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

High speed mixer granulator Aeromatic PMA 800 Gross volume 800 Lt. Normal working volume 640 Lt. Average granulated batch weight 350 Kg Impeller speeds 78/156 rpm Impeller motor capacities 30/36 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

Label Flexo Printing Machine Max speed 150 m/min Unwinder + E&L web guide Ø 1000 m, max. weight 300 kg Printing units 7, gearing 1/8”CP Between station 1 and 2, there is a turner bar equipped with web guide Max. web width 413 mm Max. print width 407 mm (16”) Printing cylinders 16 x 12,625” (320,662 mm), 16 x 14,125” (358,77m mm) Anilox cylinder 4 x 255 l/cm volume 4,5 cm³/m² 6 x 140 l/cm Lateral register: ± 5 mm Longitudinal adjustment: Unlimited at all printing and die cutting stations, choiceectable from mobile control console, smallest adjustment 0,05 mm. Web inspection : Tecscan web inspection system Drying: Optimized hot air drying Laminating station Station 8 is a laminating station that consists of a foil unwinding unit, where web guiding ensures the foil is directed straight to the adhesive station. Following  ...

Vibrorinne MATEC drive rear Overtime separation and â repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

PRINT LINE COMPOSED BY: 1) PRINTING FLEXO MACHINE 8 COLOURS UTECO MOD. AMBER 808.IM UV NUMBER OF COLORS: 8 PRINT WIDTH: 1400 MM MAXIMUM WIDTH: 1450 MM PRINT REPETITION: MIN. 300 MM-MAX 900 MM SPEED 300 M/MIN YEAR: 1996 2) COMPLETE BASF LABORATORY FOR THE REALIZATION OF RUBBER CLICHE FOR PRINTING 3) CHANGE CLICHÉ ' 4) NR. 70 NEW KNURLED ROLLERS FOR PRINTING

Key data: 600 , 132 , 35

Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year year: 1999 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment

Brand new compressor wheel and turbine housing For sale is a fully overhauled turbocharger from the renowned manufacturer ABB, model RR131-14. This turbocharger has an operating time of 0 hours since its complete overhaul and is therefore in excellent, quasi-new condition. The internal reference number or SAP no. is 1104951o. The serial number is not available (nv). The spare part number is 228455. We ask you to check that this part number matches the one you need. If there is a discrepancy, we unfortunately cannot guarantee the correct functionality of the turbocharger for your specific application. Nevertheless, we are able to make the necessary adjustments to modify the turbocharger for your specific needs. The RR131-14 model has a nominal speed of 75000 revolutions per minute and is cooled by water. The year of manufacture and the nominal power in kW are not available (nv).  ...

Manufacturer/Manufacturer: Arburg Type/Type: 370C 600-250 Bau-year/Year: 2000 Control/Controller: Selogica Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 370 mm x 370 mm Plate Groesse/Platen Size: 570 mm x 570 mm WZ Einbauhoehe/Mould hight: min 250 mm Oeff-weg/opening stroke: 500 mm Plate distance max/Max. Open Daylight: 750 mm Snail/Screw size: 40 mm Lifting volume/shot volume: 188 cc/158 gram hp Spez. Spray./injection pressure: 1900 bar General General Motor/Motor Power: 11 kW Heating/heating power: 8.1 kW Dimensions: 4.3 m x 1.7 m x 1.8 m Weichtt/Weight: 3180 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment