do all used for sale

Screw dosing unit, volumetric, with dye container Conveyor with container for plastic Adjustment of the dosing speed Touch controls

Dough Treadmill Double-sidedIdeal for 1 dough parts 2 plantProduct descriptionManufacturer: ReichType: Conveyor belt Total treadmill approx. 14mCondition: used1x Right Left TreadmillCan you adjust whether the dough goes to the right treadmill or right1x L bow treadmillWith lid pendant made of stainless steelDetails see pictures.

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Filling system, filling machine, filling station, table filling machine, filling machine, liquid filling machine, filler, dosing computer terminal -Manufacturer: Hilger u. Kern Dopag, dosing computer terminal -Type: ZM 9310-1-0 -Voltage: 230V 50Hz 1A -Connection cable: see photos -Dimensions: 535/330/H170mm -Weight: 9.6 kg

General SKU241P262 MakeLEWA TypeLCA Mach.No.533537-010.002 Year of construction2011 Pressure Working pressure30 Bar Main Features MaterialStainless steel Volume3.33 Ltr. Motor0.18 KW Specified Features - Dosing pump Pumpecosmart diaphragm metering pump Capacity3,33 Ltr/h With motor0.18 KW, 230/400 Volt (EX II2G c IIC T1-T4) With variable speed drivecheck Inletdia.8mm Outletdia.8mm Information LocationBarneveld Floorspace0,4 x 0,3 M Total height0,5 M Weight30 KG Extra SpecificationsPistondia.6mmDosing pumpsFood additivesLewaPumps > Dosing pumpsIndustries > Food & Feed > Food additivesBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

General SKU269X296 MakePrism Type16 mm Euro-lab Mach.No.3944 Year of construction2000 Sizes Screw diameter16 mm Main Features Motor1.25 KW Inlet diameter20 mm L/D22 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter16 L/D22 DC-motor1,25 kW, 240 volt, 3000 rpm Hydraulic motorcheck Screw speed0 to 500 rpm Feeding with hoppercheck Feeding with metering screwcheck 0,26 kW, 3000 rpm Used onThermoplastic compounds CapacityUp to 5 kg/h MaterialStainless steel Information LocationSold With switchgearcheck Floorspace1,10x0,80 m Total height1,30 m Weight300 kg CEcheck Extra SpecificationsWith mobile cooling bath, dimensions 2,15x0,40x1,20 m, Prism, sheet haul off unit, type KX16, dimensions 0,80x0,50x1,40 m, Extruder with Scada touchscreen control Double screw extrudersThermofischerExtruders > Double screw extrudersBrand > Thermofis ...

faceplate diameter:5000 mm swing diameter:6100 mm turning height:2400 mm ram stroke each side:1490 mm ram head dimension:340 x 340 mm max. workpiece weight:100.000 kg total power requirement:100 kW weight of the machine ca.:155 t faceplate turning speed range:0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D

1 Piece of cantilever / heavy load shelving system PK (double-sided) top state (from hot rolled steel profiles) ABM.ca.: L. 2,600 mm (2 fields with 1,250 mm axis) T. 2 x 750 mm useful depth (+ 200 mm support) H 2.250 mm > per stand 4 piece arms one above the other > Adjustable grid 100:100 mm, screw > 5 Storage level incl. foot stabilizer > Load / arm / storage level = 450 / 1,350 kg > Rack load = provided 1,800 kg each always evenly distributed load > Rack section, IPE 200 / arms IPE 80 (incl. deflector, Rolling backup optional plugin) > Color: RAL 5010 (gentian blue), connector + diagonal cross galvanized As offer single-sided shelf 1.795,-price + VAT factory Gärtringen / plus freight

The frame and the formwork is in a used good condition and can be used immediately. 26x Framax 1.35x2.70m 10x Framax 0.90x2.70m 6x Framax 0.60x2.70m 4x Framax 0.45x2.70m 4x Framax 0.30x2.70m 4x Framax 0.90x2.70m Uni 4x Framax inner corner 2.70m 2x Framax outer corner 2,70, 120x Framax RU Clamp 10x Framax Uni Spanner 10x Framax Universal Connector 10-16cm 12x Framax clamping clamp 4x Framax clamping rail 0.90m 2x Framax clamping rail 1.50m 1x Framax conversion bracket Other quantities or elements are available on request. Frame formwork Framax The high-performance steel frame formwork for large-area shelling with the crane Framax is the frame formwork system that achieves a consistent 15 cm grid with only a few elements, whether used standing or lying. All fasteners, all accessories blend seamlessly into the grid for fast formwork times and high cost-effectiveness ...

UNIROLL from DORST Type: SRHV 1 Year of manufacture: 1990 Generally overhould in: 2017 Machine is in very good condition! Including Vacuumpump!

Damrow Double-0 5,000 litre cheesevat. Closed model, CIP cleanable. With Build-in wheydrain suitable for production from Mozerella, Gouda, Tilsit, cheddar, etc. 1x double walled no leaks 1x single wall In good condition. 2 pieces available.

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Data processing!

We offer two Ford gas cogeneration plants for sale. Synchronous generator: Emod 19 KVA Engine: Ford Voltage: 230 / 400 3 phases Frequency: 50 Hz Speed: 1500 rpm COS phi: 0.8 Starter: 24 V Weight: 900 kg Year of construction: 1996 Hours of operation: 24,000

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

-reliably high load capacity across the entire beam length thanks to homogeneous web material -secured component load capacity, as all of the straps are machine stress graded and load-tested -consistent product characteristics owing to high dimensional stability -multiple savings compared to squared timber due to improved load capacity combined with lower weight -Certification EN 13377 -Produced in Austria from Doka Industrie The length of the H20 smart beam varies from 2,45m until 5,90m. Costs: 5,00 EUR/rm For more information or an appointment, you can contact me at any time. Phone: + 43 664 1296830 or Email:office@berger-international.at

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Drum/screen for Doppstadt SM - model -Chain drive (24 B1) -sandblasted, newly painted Very good condition Available drums: 1. for Doppstadt SM518 / length: 4.7 m / diameter:. 1.8 m /. Price: 19900 PLN: 4800EUR -15 x 15 mm -20 x 20 mm -25 x 25 mm -30 x 30 mm -35 x 35 mm -Fi 80mm 2. for Doppstadt SM618 / length: 5,5 m / diameter: 1.8 m /. Price: 23000 PLN: 5500 EUR -12 x 12 mm -15 x 15 mm 3. for Doppstadt SM620 / length: 5,5 m / diameter: 2.0 m /. Price: 25000 PLN: 6000EUR -10 x 10 mm - 13 x 20 mm -Fi 45 4. for Doppstadt SM718 / length: 7.1 m / diameter: 1.8 m /. Price: 27000 PLN: 6450EUR -10 x 10 mm -70 x 70 mm -Fi 150 / 1 szt. 5. for Doppstadt SM720 / length: 7.1 m / diameter: 2.0 / m /. Price: 31000 PLN: 7400EUR -12 x 12 mm

Search Dornier Delta or Dornier Delta II Lithotripter / lithotripsy

Fully reconditioned can filling machine for soft drinks and beer. Machine housing sandblasted and repainted. All seals and parts subject to wear new. Pneumatics and Electronics new (Siemens S7) Canned format: according to customer wishes upto o, 5 l

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

Oil tank double-walled 1000 L fresh oil tank - year of production 1998 - material St 37 / 2 - double-walled Incl. oil pump and all fittings and pipes, cables, etc. Transport can be arranged at low cost.

Doka Framax column stage NEW with 50% discount on the new price! Top condition! 1 x Doka support platform 150/90cm - 1633,50€ 1 x System Ladder XS 4.40m - 123.50€ 1 x Back guard exit XS - 135,50€ 1 x Connection XS Framax/Alu-Framax - 77,50€ 1 x Connection XS Support Platform - 43,05€ Prices are excl. VAT and transport Sale reserved If you have any questions, please contact Mr. Becker on 0176-70044689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm. mobile: 0049 176 70044689 Mr. Becker Office/warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 UST-ID-NR: DE279047055

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

Just one blow of the hammer on the RU clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces. The panels can be continuously height mismatched, i.e. without any pre-defined grid. This means that the formwork can easily be accommodated to e.g. steps, slopes and uneven ground, with no extra work.

Dosing system / filling plant Make Derichs in a very good used and functional condition. Fully automatic filling system, completely stainless steel, 200 L hopper, digitally controlled (Siemens OP7), programmable, integrated scale system, filling by weight input. The system is dismantled and ready for dispatch.

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Fine-sighting system for final finenesses of up to 3 microns, consisting of: product task, Acucut Safe C-24, dust filter Bühler PGFG 60/18 (39 m2 filter area, pressure shock-resistant, without fan), various dust lines and control cabinet. Previous use: toner production (power: 200 - 600 kg/h). Appendix revised in 1993, regularly maintained.

Number of sanding units: 2 St sanding width: 190 mm Sanding height max.: 2 - 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine serves to make tender steaks and fillets, as well as to make julienne; The machine is three-phase, with two tools /two-shaft; The machine is used to make tender steaks and fillets. It is applicable to different types of meat - pork, beef and chicken; The processed product does not reduce its volume, but quickly absorbs the marinade and, accordingly, has increased taste qualities; Meats processed in this way have a more attractive appearance for sale; A compact but extremely powerful machine; Made entirely of stainless steel; The motor mechanism runs in oil and you don't need to lubricate it additionally; Easy disassembly and cleaning of the machine; PRICE IN EURO without VAT: 2930

Non-contact position measuring system Manufacturer: Dornier Type: I-W-A Anwendungsgebite are: Axial and radial shaft vibration measurements Monitoring of measuring tolerances Determination of deformation and displacement Measurement of wave and eccentricities Roundness measurement Valve position measurement Thickness measurement Accessories: various transducer and mounting plates Evaluation electronics Connection cable Operating instructions Calibration curves Condition: used More info: see also photos All information without guarantee

DOOSAN DNM 4500 CNC milling machine built in Germany in 2019 is used for drilling, milling or threading workpieces weighing up to 600 kg. Machining is performed in the X,Y,Z axes on a working table with dimensions (L x W) of 1000 x 450 mm. The vertical machining centre characterised by excellent precision and exceptional machining quality, will satisfy even the most demanding customers. Noise and vibrations occurring during machining are reduced thanks to the use of a high-performance direct drive spindle operating at speeds in the range from 80 to 8000 revolutions per minute. The tool magazine can store up to 30 tools, and they are changed in a very short time of just 1.2 seconds. The machining centre is also equipped with among others, through-spindle coolant, a lubrication system and an extremely efficient and reliable FANUC 0iMF CNC controller, ensuring full control of the mill ...

Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter Ultrafiltration System for Air Compressor Condensate Oil/Water Separator for Compressed Air Condensate ● Treatment plant for the separation of compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water ● Intelligent control concept with programmable control for safe plant operation, incl. plain text display via text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection ● Optimized cleaning by comparing input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection wi ...

Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe

Doka Alu Framax 127 m2 Good condition of frame and formwork skin (partly new Finply formwork skin or used X-Life formwork skin) Due to its lower weight, the aluminium frame formwork is suitable for shelling with and without a crane. Also seamless in combination with Framax steel formwork suitable. Lightweight and versatile due to sturdy profile frame made of aluminium Reduced workload when shelling by hand due to low element weight, with a high load capacity of 60 kN/m² can be implemented by hand or by crane thanks to frames made of torsion-resistant aluminium hollow sections Division into crane and hand formwork areas 20 x Element 0,90x2,70m 20 x Element 0,75x2,70m 14 x Element 0,60x2,70m 6 x Element 0,45x2,70m 6 x Element 0,30x2,70m 2 x Outer corner 2,70m 2 x Inner corner 2,70m Partial quantities are also possible! Doka Alu Framax 127 m2 Good condition ...

Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available