We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,375 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Jackdal trolley Overwrough sewing machine KL 759
used
Machine Details Warehouse number 1105-03706 Machine type CNC lathe Make DOOSAN DAEWOO Type LYNX 210 Year of construction 2004 Control type CNC Control Fanuc 21-T Storage location FRANCE Country of origin KORREA Delivery time immediately Freight base from location Technical details Turning diameter 460 mm Turning length 300 mm Control Fanuc 21-T Turning diameter over bed 460 mm Turning diameter above the face carriage 280 mm Travel - x 160 mm Travel - z 330 mm Center width 335 mm Rapid traverse X-axis 12 m/min Rapid traverse Z-axis 15 m/min Speed range - main spindle 42 - 4,000 rpm Spindle nose A2-6 Spindle passage 51 mm Spindle bore 65 mm Spindle cone 1/20 Drive power - main spindle 7.5 kW Tool slots upper turret 10 . Shaft diameter 32 (round) mm Shaft diameter 20 (square) mm Pipe diameter max. 50 mm Chuck diameter 200 mm Coolant tank 87 l Total power ...
used
Doosan DNM 650 II Vertical Machining Center Machine is in good condition
used
Inv. Num. : 7400 Type: GT 2100 Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC Maximum turning length: 562 mm Max. turning diameter: 390 mm Maximum turning diameter over bed: 600 mm Maximum travel length in the X-axis: 230 mm Maximum feed rate in the Z-axis: 580 mm Maximum main spindle power: 15 kW Maximum spindle speed: 4500 1/min Number of tools: 10 pieces Length: 3890 mm Width: 1628 mm Height: 1700 mm Weight: 3500 kg Equipment: Technical Documentation Conveyor Shovel Collets Bake Knife Collet head Universal three-jaw head Cutter head with 10 positions Programmable tip/spring 2023/3: Replacement of bearings in the spindle
used
Doosan Puma 400 LMB CNC Lathe C axis Distance between centers: 2000 mm Max turning diameter: 700 mm
used
Gantry type CNC Vertical Machining Center Maker : Dorries Scharmann New : 1993 /2009 CNC retrofitted Model : 100FZG 600/700 CNC Control : Siemens 840D Table size : 6000 x 21000 mm Workpiece length : 22000 mm width : 7000 mm Height : 6000 mm Milling ram stroke : 2000 mm Milling spindle motor : 140 kw Rotating speed : 20 ~2000 rpm Milling ram section : 550 x 460 mm With ATC, 8 AAC as 3 Angle attach, Universal attach, 3 special attach.
used
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
used
Product number: 2474 Type: VV-6-1400 Serial number: 047 Drum: 2800 litres Capacity: max 1400 kg (incl. brine) Vacuum pump: 63 m³/hr Drum speed: 1.5 / 3 / 6 RPM Power: 3 x 380V, 50Hz, 3.4kW Dimensions: 2050 x 1950 x 1900 mm Weight: 940 kg
used
Cheese dividing machine DOMA KT3 EMF Specifications: 400 V / 50 Hz / 1.1 kW / 2.6 A 16A CEE Plug Year of construction: GÜ 2009 including knife insert for 4 parts Machine dimensions: H106 x W60,5 x D60,5 cm Diameter cheese loaf max. 40 cm Height cheese loaf max. 20 cm Function tested, machine immediately ready for use Stock machine, immediately available! Condition see original pictures! If you have any questions, email or call.
used
USED DORST TPA 30
used
Used Dorst TPA 45
used
x-travel: 1500 mm y-travel: 1000 mm z-travel: 700 mm number of tools: 8 spindle turning speed range: 4200 U/min table-size: 1500 x 1000 mm capacity: 20 kVA rapid traverse longitudinal and cross: 30 m/min rapid traverse Z-axis: 20 m/min tool taper: SK 40 Boring power: 40 mm thread - module: 24 mm Control: MITSUBISHI MMI table height: 780 mm max. dist. between floorpl. and spindle-nose: 670 - 1320 mm max. distance between table and spindle-nose: 180 - 830 mm total power requirement: 11 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 3,9 x 2,2 x 3,27 m Chip Conveyor: : Coolant System: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Feed channel dosing technology Brand: Dosiertechnik 2 pieces: Dim. feed channel: length 4300 mm - width 400 mm. Drive: 2 vibration motors of 1.7 kW each Dim. feed channel: length 5000 mm - width 400 mm. Drive: 2 vibration motors of 1.6 kW each
used
used
This DOOSAN PUMA TT1800SY lathe was made in the year 2011. It is equipped with a FANUC 31i-Model A control unit. The machine has a spindle speed of 5000 rpm.
used
This DOOSAN 5100LB Lathe was made in 2018. It is equipped with a Fanuc Series OiT control unit and has 2 axis. The machine has a spindle speed of 1500 rpm.
used
This Doosan MX2000S lathe was made in the year 2007 and has 15000 hours. It is equipped with a Fanuc Series 16i-TB control unit and has 9 axis. The machine has a spindle speed of 5000 rpm.
used
This DOOSAN HP 6300 Horizontal Machining center was made in 2007 in Korea. It is equipped with a Fanuc Series 18i-MB control unit.
used
This Doosan DNM 4500 Vertical Machining center was manufactured in the year 2021 in South Korea. It is equipped with a Fanuc i-Series control unit and has 4 axis. The machine has a spindle speed of 12000 rpm.
used
This Doosan DNM 6700 Vertical Machining center was manufactured in the year 2016 in South Korea. It is equipped with a Doosan Fanuc i-Series control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.
used
used
Machine Details Stock number 1105-03752 Machine type machining center - vertical Make DOOSAN DAEWOO Type MYNX 550 Year of construction 2002 Control type CNC Storage location HAGUENAU Country of origin KORREA Delivery time IMMEDIATELY Freight base ex works Technical details longitudinal 1270 mm transverse 510 mm vertical 625 mm Tool changer 30 pos. tool length 250 mm tool diameter 80 mm tool through. with free neighbor box. 130 mm Rapid traverse 30 m/min Machine weight ca. 8 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (central table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 TIMES ATC BT 40 CHIP CONVOYER
used
; Gross weight [kg]: 3100; Engine: Doosan P126TI-II; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470
used
; Gross weight [kg]: 2985; Engine: Doosan P126TI; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 470
used
Perfection: 1/1, Standard Dampening
used
Standard Accessories
used
Domino A 400 printing system; 6 print heads; Ink starling; Documentation. Printing system Domino A 400; six heads; Inkjet; Manuals.
used
Pressure: 16 bar Motor: 0,22 kW Free air delivery: 1,08 m³/min Measurement (WxHxD): 360 x 645 x 410 Weight: 31 kg Compressed air connection: 1/2
used
; Gross weight [kg]: 5950; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000
used
; Gross weight [kg]: 9370; Engine: Doosan DP222CC; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002
used
very good condition inspection possible video available
used
We offer a Doka Frami wall and foundation formwork 206,505m² complete with many accessories. The formwork is 90% newly covered with new Finply birch cladding 220- 240g/m²phenolic resin coating. The rest of the elements are checked and sorted and covered with original Doka Xlife formwork. Exposed concrete class 2/3 possible without any problems. New value approx. 160.592,60€, special net price 41.498,15€ Piece Description 19 Frami Xlife-Element 0.30x1.50m new plywood 2 Frami Xlife-Element 0.45x1.50m new plywood 51 Frami Xlife-Element 0,60x1,50m new plywood 35 Frami Xlife-Element 0.75x1.50m new plywood 2 Frami Xlife-Element 0.75x1.50m used top xlife 7 Frami Xlife-Element 0,90x1,50m used top xlife 6 Frami Xlife-Element 0.90x1.50m new plywood 11 Frami inner corner 1,50m 20cm inner corner 7 Frami outer corner 1.50m outer corner 1 Frami hinge corner A galvanized ...
used
The DOOSAN TT 1800 SY lathe, manufactured in 2006, features a FANUC Series 18i-TB control. It boasts robust features such as a sub-spindle, driven tools, dual C-axes, a Y-axis, and twin turrets. Additional amenities include a parts conveyor and a chip conveyor. Note, the automatic bar feeder requires some adjustments for optimal performance. Reach out for more information about this DOOSAN TT 1800 SY lathe.
used
used
; Gross weight [kg]: 6200; Engine: Doosan DP222CC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1500
used
used
Doosan DNM 5700 CNC Vertical Machining Center 12 000 rpm Machine has been used in medical sector. Due to the sector, the machine was processed brass and aluminum. It never worked for steel or any other metal materials. Machine has been used only one year. It is like new condition X Axis Travel distance 1050 mm Y Axis Travel distance 570 mm Z Axis Travel distance 510 mm
used
Press-wire with HDTV automatic assembly for doors model Door Assembler 2800 (MH9328) Quantity: 1 Location: Kaliningrad Release year: 2020 Country of origin: China Optional: Press-wire with HDTV assembly automatic door model Door Assembler 2800 (MH9328) Min. door leaf size: 1000x450mm, Max. door leaf size: 2800x1400mm, Max. workpiece section: 150x60mm, total power: 8.9 kW.
used
From a current utilization we can offer you mentioned machine. We are happy to provide you with details on request. The sale is without guarantee Subject to prior sale
used
Expected particle size: 0.5-50µm, dust consistency: dry and free-flowing. Operating temperature:
used
Power: 11kW, rotational speed: 1450/min.
used
´Suitable for bulk material, current: 5A, compressed air supply: 0.6MPa, with integrated weighing unit.
used
Working width: 4000mm, with 3 warp beams, 6 sectional warp beams, 20 shafts 13 inch, dobby machine 2881/2 and batch winder Neuenhauser, operational hours counter: 10,613h.
used
Seam width: 28mm, with integrated cutting device, knife diameter: 100mm.
used
There are five industrial sewing machines Dohle available (1) Dohle 751-914, year of manufacture: 1991 (2) Dohle RAPID-H, year of manufacture: 2000 (3) Dohle 621-904, year of manufacture: 1989 (4) Dohle VARIANT-S-7, year of manufacture: 1997 (5) Dohle RAPID-H, year of manufacture: 2000.
used
Capacity: 1000l, controls: variotronic 1, was maintained regularly.
used
Distance from the surface: 12mm, length: 455mm, width: 370mm, height: 524mm, weight: 24.5kg, with documentation.
used
There are two Domino A400 available, were not used for eight years, with ten printing heads.
used
The device is the standing variation, heating surface: 34m³, power: 2000kW, pressure: 12.7-14.3bar, diameter: 505mm, length: 4590mm, weight: 650kg, with documentation, the countercurrent device was in use for just one winter.
used
Nominal power: 40kVA, weight: 1.4t.