do all used for sale

Granule dosing unit KOCH, paint mixer, control

Hinged door steel cabinet approx. 90x190 cm, without contents

Sheet metal locker 4-door

Hanging file steel cabinets 2 pcs. 2x A4 side by side, 4 drawers, 1 pc. 1x A4, 4 drawers

Industrial rack consisting of 20 sections, each of which can accommodate 2 drums of 1,500 kg, for a total capacity of 40 drums of 1,500 kg. Equipped with an automatic rewind system supplied along the entire length. Very good overall condition. Sold without yellow protections Height: about 3 meters Very good overall condition Auction-ID: A1-45489-81

bm TEC Dough Conveyor Belt Long Belt width 350 mm Belt speed infinitely adjustable Stainless steel version only DGUV V3 tested by us Connection 230 V Used device cleaned

Semi-automatic double clipper PolyClip PDC 600, Built in 2002, air hoses and rollers renewed, Dimensions LxWxH approx. 100x80x190cm, weight approx. 85kg, good used condition, fully functional

Docking station LENOVO Thinkpad 40AF

Network Document Scanner KODAK ScanStation 710

Document Shredder AMAZON Basics 8 Sheets

Docking station LENOVO Thinkpad 40AF, S/N ZHK1902B 20/10

bm TEC Dough Conveyor Belt Short Belt width 350 mm Belt speed infinitely adjustable Stainless steel version only DGUV V3 tested by us Connection 230 V Used device cleaned & SAB tested

Fan locker grey 3x3 doors

Hinged door steel cabinet approx. 100x190 cm Inscription Reference parts Production cabinet 1

bm TEC Folding Dough Conveyor Belt Belt width 300 mm Belt speed infinitely adjustable Stainless steel version only DGUV V3 tested by us Connection 230 V Used device cleaned & SAB tested

Hinged door steel cabinet GARANT approx. 120x190 cm

2-Shaft Mixer; with tilt function; Lining and kneading wings are made of stainless steel, 2-Z-shaped kneading blades; Length 2.90 m, width 1.30 m, height 2.10 m, trough size 64 x 69 x 55 mm Engine type ZG4 KMR 132 S4; Motor power: 7.5 kW; Motor voltage: 380/ 660 V; Rated speed motor: 1435 ... 1480 rpm; Output speed (gearbox): 160 rpm. The plant was shut down in 2024. more photos on request

4-Wheel Electric Forklift DOOSAN B30NS 10/2022 Billing number: 7040270796 Serial Number: FBA48-3690-01527 (same as invoice) Operating hours read: 3.694.6 h Nominal capacity: 3,000 kg Machine weight with body: 5,101 kg Construction: HSS Volts: 80 V Net weight without battery: 3,726 kg Max. battery weight: 1,375 kg Power: 12 kW Next inspection according to inspection sticker: 09/2026 Equipment: with triplex mast, 2 forks, Front lighting, Seat: 1, Armrests, with mobile Easykey system, 1 charging station (stored separately and Inspection not seen, a photo of it was taken subsequently transmitted) Code: 1 Documentation: Inspection book available Tyres: more used (smooth) Known defects: various scratches and abrasions all around forklifts as well as severe paint damage, various rust spots, Tires torn in various places Auction-ID: A7-45881-1

Sheet metal sliding door cabinet CP 140x180 cm, with 2 cabinet attachments, plus cabinet opposite

Dowel Drill VITAP Row Hole Drilling Machine Type ALFA 21 Year of construction 2006 Drilling unit with 21 drills in 32 pitch Drilling unit pneumatically swivel 45° Distance between the first and the last spindle 640 mm Maximum drilling depth 70 mm Spindle revolutions 2800 rpm. Motor power 1.8 kW Operating pressure 6-8 bar Left and right adjustable stop on machine table With length stops Weight with pallet approx. 330 kg

Double workstation pipe system/real wood panel approx. 160 cm, superstructure, lighting, internal workstation 503

Sheet metal lockers 2 pcs. 4-door, 2 pcs. 3-door

Hinged door steel cabinet HOFFMANN, green approx. 60wx200hx20t cm, filled with nozzles and non-return valves

Hinged Door Steel Cabinet Light Grey approx. 90x190 cm Accessories ZMV

Changing lockers 9 x 3-door, 3 x 4-door, some doors defective or no longer available, plus 2 double benches

Double girder overhead crane KONE CRANES 25/25/25 t, S/N G00756, remote-controlled, span approx. 22 m, lifting capacity 25 t

Repair required Auction-ID: A1-45793-119

Auction-ID: A1-45793-100

Set consisting of: 2 x BENQ Monitor, Dual Arm Mount, LENOVO Docking Station, Cable Auction-ID: A1-45973-64

Set consisting of: 2 x BENQ Monitor, Dual Arm Mount, LENOVO Docking Station, Cable Auction-ID: A1-45973-63

Set consisting of: 2 x BENQ Monitor, Dual Arm Mount, LENOVO Docking Station, Cable Auction-ID: A1-45973-71

Set consisting of: 4 x BENQ monitor, 2 x dual arm mount, 2 x LENOVO docking station, cable Auction-ID: A1-45973-67

Specifications: - X-axis: 162mm - Z-axis: 750mm - Y-axis: +/- 50mm - C-axis: yes - B-axis: 670mm - sub spindle speed: 4500rpm - sub spindle motor power: 5,5kW - live tooling: yes - live tooling speed: 3000rpm - live tooling type: BMT-55 Machine is equipped with: - Chip conveyor - Bar feeder - live tooling - y-axis - tooling in turret included - pallet with tooling included Auction-ID: A1-45752-10

Set consisting of: 2 x BENQ Monitor, Dual Arm Mount, LENOVO Docking Station, Cable Auction-ID: A1-45973-70

Docking Station LENOVO Thunderbolt DK2131, S/N SD21K53858

Coin Set Canada 1990 st 1 ct -25 ct + 1 Dollar

Silver Coin Canada 5 Dollar Maple Leaf 2003 st Silver .9999 31.1 gr Roughweight

Silver Coin Canada 1 Dollar 1973 EF Silver .500 23.3 gr Rough Weight

Silver Coin Canada 5 Dollar Maple Leaf 2003 st Silver .9999 31.1 gr Roughneck

Silver coin Canada 1 Dollar 1980 100 years arctic regions pp silver .500 rough weight 23.32 gr, KM128, case

Silver coin Canada 1 Dollar 1980 100 years arctic regions pp silver .500 rough weight 23.32 gr, KM128, case

Circulation Coins Fiji 1 Ct - 1 Dollar 1987 1996

Stamps and badges Dom-Weihe Mainz 1928, 7x further badges partly foreign

Circulation Coins Tonga 1 Sene - 1 Dollar 1974-2002 st

A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible.

An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

Number of spindles hole row: 16; Number of spindles horizontal: 5; Cup belt drill head: yes; Drill pitch: 32mm; Hold-down : yes / pneumatic; Power consumption: 2.2kW; Drilling unit: swivelling;

Number of spindles hole row: 11; Number of spindles horizontal: 3; Cup belt drill head: yes, Blum; Drill pitch: 32mm; Power consumption: 2.2kW; Drilling unit: swivelling;

Angle display: digital; Dimensions display of cut-to-length flaps: digital;

angle: 0° - 90°; max cutting length: 1370 mm; easy handling and quick mounting on the carriage of the saw for fast and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90