do all used for sale

Manufacturer: Torwegge, Type: 8010, Year: 1998, Maschinensteuerung: yes, Motore Maschine 1: 4 +4, Conveyor: 1 Kettenmaschine, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 6-30, Working width min-max mm: 80, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: 10-40, Feed stepless: yes, Overall milling units: 4+4, Moulding units swivel-mounted: 4+4, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 4,5/5800, 2nd milling unit kW / rpm: 4,5/5800, 3rd milling unit kW / rpm: 4,5/5800, 4th milling unit kW / rpm: 4,5/5800, Year :1998

Manufacturer: Homag, Type: FL 20/06/30/S, Year: 1995, Maschinensteuerung: Homatic, Machine no 1: Quermaschine, Motore Maschine 1: 5, Magazine: yes, Conveyor: Kette, Work piece width min-max mm: ca.220, Min.-max. workpiece length in mm: 220-3000, Min.-max. workpiece height in mm: 10-40, Machine with controlled dogs: yes, Cam distance mm: ca.400, Feeding speed min-max m/min: 6-40, Feed stepless: yes, verängerte Kette mm: yes, Nockenaushebung: no, Magazine: yes, Overall milling units: 10, Moulding units swivel-mounted: 5+5, gesteuerte Fräsaggregate: no, 1st milling unit kW / rpm: 6,6/5800, 1. swivelling controllable: schwenkbar, 2nd milling unit kW / rpm: 6,6/5800, 2. swivelling controllable: schwenkbar, 3rd milling unit kW / rpm: 6,6/5800, 3. swivelling controllable: schwenkbar, 4th milling unit kW / rpm: 6,6/5800, 4. swivelling controllable: schwenkbar, 5th milling unit kW / rpm: Freipl ...

Manufacturer: Homag , Type: Power FR 20/09/15/L/Q1, Year: 2007, Control: Powercontrol Homag, Conveyor: Nockenkette, Work piece width min-max mm: 350, Min.-max. workpiece length in mm: 220-1500, Min.-max. workpiece height in mm: 10-30, Machine with controlled dogs: yes, Cam distance mm: ca.500, Feeding speed min-max m/min: ca.60, Feed stepless: yes, verängerte Kette mm: yes, Overall milling units: 5, Moulding units swivel-mounted: 5, gesteuerte Fräsaggregate: keine, 1st milling unit kW / rpm: 6,6/5850, 1. swivelling controllable: yes, 2nd milling unit kW / rpm: 6,6/5850, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 6,6/5850, 3. swivelling controllable: yes, 4th milling unit kW / rpm: 6,6/5850, 4. swivelling controllable: yes, 5th milling unit kW / rpm: 6,6/5850, 5. swivelling controllable: yes, Year :2007

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

Manufacturer: Ima zweieinseitige Maschinen in Verkettung, Type: Combima I, Year: 1999 Überholt 2010, Control: IMA, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Infeed table: Rollgang mit Drehstattion, Min-max edge thickness mm: 0,5-3,0, Min-max strip length mm: 300, Min-max protrusion of workpiece mm: 38, Min-max feed m/min: 8-40, Velängerte Kette mm: yes, Cam distance mm: ca.450, Premilling: yes, Profile milling: yes, Machining cracks: Zerspanen, Fine milling: yes, IR zone: yes, Coil magazine: 4-fach, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Corner tracing type: MFA, 2 motors: yes, Servo copying: yes, Rolling chain: yes, Bonding part EVA: yes, Vertical grooves: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, Flat scraper: yes, Servo copying: yes, Year :1999 Überholt 2010

Manufacturer: Homag, Type: FL 20/07/15/S, Year: 2003, Destacking plant: PC 21, Vereinzelung: Woodline, Software: yes, Maschinensteuerung: 220 - 1500, Machine no 1: 220, Motore Maschine 1: 8 - 90, Machine 2: yes, Motore Maschine 2: 500, Kantenversiegelung: 10- 40, Conveyor: yes, Trittschal: max 110, Einlegstattion in Kartons: 25 mm, Min.-max. workpiece height in mm: 11, Working width min-max mm: yes, Working hight min-max mm: 6,6, Machine with controlled dogs: yes, Cam distance mm: 6,6, Feeding speed min-max m/min: yes, Feed stepless: 11, Min-max protrusion of workpiece mm: yes, 3 Engine power kW: Mittelschnitflasch Arbeitsbreite 300 - 500 mm, Year :2003

Manufacturer: Weinig Unicontrol, Type: Unicontrol 10, Year: 1999, Control: Weinig/Siemens, Controlled lenght stopper: yes, Trimming saw: yes, Studioeinrichtung Winkel: no, Automatisierungspaket: yes, Doppelteilpaket: yes, Elektrischer Längenanschlag bis mm: 3600, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400/320, Length of tenoning spindle mm: 640, Tool travel range tenoning spindle: für 8 Werkzeuge, Schlitzspindel Motorleistung kW: 7,5, Moulding spindles: 3, Länge Profilspindel mm: 320 X 50, 1 length of profile spindle in mm: 320, 1Engine power kW: 5,5, 2 length of profile spindle in mm: 320 X 50, 2 spindle lift in mm: 320, 2 Engine power kW: 5,5, 3 Länge Profilspindel mm: Profilfräsaggregat vertikal, 3 Engine power kW: 2,2, Diameter of the spindle mm: 50, Fly circle moulding tool mm: 320, Fly circle tenoning tool: 400, Constant str ...

Manufacturer: Weinig, Type: Unicotrol 10-5, Year: 1992, Control: Siemens/weinig, Min.-max. workpiece height in mm: max.100 mm, Controlled lenght stopper: yes, Trimming saw: yes, 4-fach Konterholz: yes, Studioeinrichtung Winkel: yes, Automatisierungspaket: yes, Doppelteilpaket: yes, Unitecspindel: yes, Beschlagfräseinheit: yes, Nutspindel: yes, Crosscut saw controlled: yes, Diameter of the spindle mm: 50, Werkzeugdurchmesser max.: mm: 400, Tool travel range tenoning spindle: 6 X 85/7 Werkzeuge, Länge Profilspindel mm: 3, 1 spindle lift in mm: 2 X 95/3 Werkzeuge, 1Engine power kW: 2 x 95, 2 length of profile spindle in mm: 11, 2 spindle lift in mm: 3 X 75/4 Werkzeuge, 2 Engine power kW: 3 X 75, 3 Länge Profilspindel mm: 11, Diameter of the spindle mm: 3 kw, Diameter of the spindle mm: 50, Feed stepless: 6-12, Total power kW: yes, Required space L x W x H mm: 10, Year :1992

Manufacturer: IMA, Type: FBA/II/R80/660 F, Year: 1992, Control: IMATRONIC, Work piece width min-max mm: 220-2000, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 8-45, Working widht max mm: 2600, Machine with controlled dogs: yes, Cam distance mm: 320, Extended chain conveyor: 850, Scoring saw controlled: yes, kW / U/min: 1,5/6000, 1st milling unit kW / rpm: 4,4/6000, 2nd milling unit kW / rpm: 3,3/6000, 2. swivelling controllable: yes, 3rd milling unit kW / rpm: 3,3/6000, 3. swivelling controllable: yes, 7.Profilschleifaggregat Stk.: 4 pro Seite, 8.Flächenschleifaggregate Stk: 2, 9. Bürstenaggregat: 2, Aggregats per side - total: 9, Sawing unit: 1, Hersteller Prägestationen: 3, Folienprägestationen: 2, Prägehöhe mm: 5-30, Year :1992

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Spiral mixer KEMPER, type: SPL 30 -in very good condition- - Kettle suitable for 30 kg flour or 45 kg dough - 2 speeds forward - 2 speeds backwards - 2 Time clocks - Emergency stop switch - Emergency stop when opening - Center rod for low dough quantities and less heat generation - Stainless steel spiral and boiler - New Shooters - Boiler welded in one place - Condition: technically very good, very smooth running, ready for use immediately Visits and test runs are possible by arrangement. Further photos and information are available on request.

Lifting kneader KEMPER, type: F 30 S -in good condition- - For a maximum of 50 kg of dough or 30 kg of flour - Kettle and kneading arm made of stainless steel - 2 speeds - Protective grille - New connection cable - Very smooth running - Condition: good, ready for immediate use Visits and test runs are possible by arrangement. Further information is available on request.

Spiral mixer KEMPER, type: ECO 75 - for approx. 120 kg dough, 75 kg flour - Machine in used condition - is still being cleaned and technically checked - Overhaul possible: all parts are renewed, new paintwork, new bearings, new belts, new time clocks, etc. Visits and test runs are possible by arrangement.

Lifting mixer DIOSNA, type: S120 Plus -In very good condition- - for 120 kg rye dough and 90 kg wheat dough - for 75 kg rye flour and 58 kg wheat flour - The "Plus" kneader runs faster than a normal lifting kneader - New two-step switch, no footswitch - More powerful "plus engine" - 2 speeds - Plastic flour dust cover - Machine can be driven on wheels - With rotary wheel to lock or release the wheel brake - Condition: technically very good, everything checked - The machine runs very smoothly, we can send a video - Ready for immediate use The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Very good spiral mixer KEMPER, type: SPL 100 -completely overhauled- - for 100 kg flour or 160 kg dough - completely overhauled - New bearings, rhymes, time clocks, painting - with center rod - 2 speeds in forward or reverse gear - Machine kmplett overhauled, as good as new, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Lifting mixer DIOSNA, type: S 20 2G -In very good condition- - For a maximum of 20 kg of dough or approx. 12 kg of flour - 2 speeds - Rewired and new connection cable - Engine Newly Mounted - Machine repainted - Shell and arm in stainless steel - Machine runs very smoothly - Very nice condition - Ready to use The kneading arm was professionally welded and reinforced (stainless steel) at the upper area. The machine runs very smoothly. A video is welcome to be sent. Inspection and test run are of course possible by arrangement.

Lifting kneader KEMPER, type: F 75 SL -in very good condition- - Kettle for 75 kg flour or 120kg dough - 2 speeds - Kettle and kneading arm made of stainless steel - Incl. stainless steel dust cover - New V-belt - El. Connection: 220 / 380 V, 50 Hz - Condition: Very good, ready to use Visits and test runs are possible by arrangement.

Head machine LIPPELT, type: Mini Rustica -in bakery condition- - Head machine / dough divider for ciabatta and rustic rolls - With cutting rollers for longitudinal cutting - Including 3 different cutting rollers - with guillotine for the cross-section - including seed station with 2 large plates and 2 smaller plates - The machine has been technically completely tested - Condition: Very good, ready to use - Capacity: approx. 4,000 pcs./h - El. Connection: 3x 400 V, 50 Hz, 1.1 kW The machine can also be purchased without seeding. The head machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrangement.

Spiral mixer DIOSNA, type: SP 120 D -completely overhauled- - for 120 kg of dough and 75 kg of flour - Stainless steel spiral - Stainless steel boiler - 2 digital time clocks - 2 speeds - 1 reverse gear - Emergency stop switch - Condition: Very good, as good as new, ready for use immediately - 6 months warranty The spiral mixer has been completely overhauled and is in very good condition. Inspection and test run are possible by arrangement.

Very good spiral mixer KEMPER, type: SPL 75 -overhauled- - for 120 kg of dough or 75 kg of flour - 2 new time clocks - 2 gears and 2 speeds - Stainless steel spiral and boiler - All wear parts renewed - new belts, restocked, repainted, etc. - Condition: very good, - everything completely overhauled, as good as new - Ready for immediate use - incl. 6 months warranty Inspection and test run are possible on request.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

Max. cutting length: 4,500 mm Max. saw blade diameter: 550 mm Automatic length positioning and angle adjustment via program control Motorized adjustment for swivelling on both sawing units, allowing angles between 45 and 90 degrees to be directly controlled New network-compatible control system in 2019 Minimum quantity spraying device Weight: approx. 2200 kg

Head machine / dough divider W&P, Type: Multimatic MUC-5 -Overhauled- - Gentle dough division - 5 rows - Weight range: 35 - 85g - Capacity: max. 10,000 pcs. / h - Stainless steel - new tapes - Condition: Very good, many parts renewed Viewing and test run are possible.

Spiral mixer KEMPER, type: SPL 50 -in very good condition- - Kettle for 80kg dough or 50kg flour - Center rod for smaller amounts of dough - With new long connection cable and reversible plug - a time clock - Forward and reverse gear with 2 speeds each - Machine stop when the lid is opened - Stainless steel spiral and boiler - Stainless steel dust cover - Bearings, V-belts and electrics have been checked The kneader is in very good condition and is ready for immediate use. The machine has been technically tested. Visits and test runs are possible by arrangement.

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

TECHNICAL DATA: Sanding belt length: 2800 mm Installed power: 2 hp

Spiral mixer KEMPER, type: SP150 AL with lifting tipper DIOSNA HK240 -In very good condition- - Machine overhauled in 2024 - Incl. 3 tank cars (also overhauled) - Kettle for 240 kg dough or 150 kg flour - incl. DIOSNA HK 240 lifting tipper also overhauled - Condition: Very good, ready to use immediately Visits and test runs are possible by arrangement.

Burgess Three roll sheeter Stainless, three roll sheeter, with top mounted hopper, 450mm rollers, two fluted rollers and one smooth, on mobile frame, 3Ph

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Dough Sheeter Seewer Rondo SSO 62 Bakery condition, repaired Year of Make: 1998 Belt width 58 cm Fully automatic or manual operation Digital control

Universal Dough Divider Schäfer DiviSoft Manual Dough Divider Year of manufacture: 2017Incl. 42 BathtubsIncl. 3 punches (take sizes from the pictures) 18-litre tub Suitable for: Production purposesInner dimensions: 47.5 x 40.5 x 10.0 cm (W x L x H)Dough weighing:7 kg for long-term fermentation and strong fermentation.11 kg for shorter proofing time. The artisanal answer to machine-produced mass-produced goods With the new UNIVERSAL DIVIDER, all parts are gently divided. The free choice of dough insert, proofing times and partial heads allows for a previously unimagined variety. High quality and variety

Dough divider and rounder Fortuna Primus Pro 6 Year of Make: 2015 Condition: cleaned and tested 6-row head machine Hopper volume: 40 kg Maximum hourly output: 9000 pieces Weight range: 40-100g Touchscreen control with recipe memory With flour and pressure roller at the outlet Adjustment of the weight and the effective chamber height via hand crank Machine on rollers, mobile with brake

Dough dividing machine WP Kemper Imperator CT Year of Make: 2015 Condition: Bakery Condition Hourly output: 800-1700 pieces Weight range: 200-600g / 600-2350g Dough funnel capacity: 200 kg

Water mixing and dosing device Langheinz Aquamix 32 Fully automatic water mixing and dosing unit with three inlets, demand-controlled flow and numerical input keypad Condition: new sealing rings, dirt screen and battery. Maintenance carried out. for connection to the drinking water network Intrinsically safe according to DVGW for mixing and dosing ice, city and hot water with automatically controlled flow that can be switched off Automatic Repeat and Partial Repeat numeric keypad 0-9 Housing material AISI 1,403 with 3 water temperature inlets

Dough divider and rounder King Grande Rex T3 Year of Make: 2021 Condition: cleaned & tested Extended model of the Basic Rex for processing high dough weights Also suitable for pizza, baguettes and other products 3-row head machine Max. hourly output up to 2160 pieces Stamp size SK 95 Weight range: 135 to 320 g

Biscuit dosing machines Comas DLV 450 Year of Make: 2008 Condition: very good Siemens control system Working width: 450 mm

Dough strand divider WP Kemper Relaxer S This model produces dough strands piece by piece and protects the dough. The tedious manual strand production is no longer necessary in small and medium-sized companies. Dough strand production for storage in rattan or plastic baskets Year of Make: 2016 Condition: cleaned and tested Output: 4 strands of dough per minute / 240 per hour Dimensions of the dough strands (L x W x H): 850 x 165 x 110 mm Suitable for TA 150 to 180 Hopper capacity approx. 160 kg (opening 720 × 600 mm) Hopper filling height: 1830 mm (loading with tilt lifter)

Dough Divider and Rounder King Mini Rex Multi Year of Make: 2012 Condition: cleaned & checked, maintenance carried out Roller hopper up to approx. 15 kg dough capacity Removable components for easier cleaning Simple control via microcontroller via touch panel Different weight ranges due to easy and safe replacement of the weighing drum bars Single to four-row operation Maximum hourly output of 1200 â€" 4800 pieces per hour Extremely large weight range: 8 â€" 330 g (different stamp sizes required) Incl. stamp size SK58, weight range:

Dough divider and rounder König Industrie Rex I 6 Condition: cleaned and tested Incl. dough funnel with lubrication, laterally movable with ladder Weight range: 30â€"100 g Max. hourly output: 18,000 pieces Siemens touch control with program memory Incl. 1 chamber drum Incl. 1 set for 4-row production, 1 set for 6-row production

Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg

Dough divider and rounder WP Multimatic MUC 5 Year of Make: 1994 Condition: Dough chamber overhauled, immediately ready for use Type: MUC 5-row Weight adjustment by handwheel Weight range: 30 to 90 g Incl. 1 chamber drum of your choice and availability Capacity: 600 to 2000 pieces/h per row (depending on dough type and weight) Individual pistons can be locked for e.g. 4-row operation

Dough sheeter WP Kemper Quadro Relax S Modular high-performance roll line for processing roll dough with long pre-proofing Head machine with dough strand former, 2x flour shaker, RelaxS roller mill, SoftCut weighing knife, stamping station and extendable and cleanable EasyPull conveyor belt Products: square biscuits (TA: max. 170) Weight range: 25 to 1000 g/pc (depending on the knife roller) Capacity: max. 800 kg dough/h Hourly output: max. 10,000 pcs/h (with 5-row operation) Working width: 800 mm Depositing device with take-off length max. 2000 mm Touch Screen Control

Sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - El. Connection: 3x 400 V, 230 V, 50 Hz, 3 Ph, 11.0 A, 1.4kW - Strip width: 650 mm - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

CONTROLS   conventional WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 150 mm   material thickness max. - throughfeed grindin: 70 mm GRINDING SPINDLE 1   spindle revolutions (max): 610 /min GRINDING SPINDLE 2   spindle revolutions (max): 610 /min COMPONENT-FEEDER   Feeder Design: rotary Feeder DIMENSIONS / WEIGHTS   space requirements -left/right-: 5230 mm   space requirements -front/back-: 4460 mm   total height: 3600 mm   total weight approx.: 11000 kg Machine is dismantled and stored

CONTROLS   CNC controls SIEMENS 810 T WORKING RANGE (DOUBLE DISC GRINDER)   Grinding wheel diameter: 750 mm   grinding width max. - throughfeed grinding: 180 mm   material thickness max. - throughfeed grindin: 30 mm   grinding width max. - plunge cut grinding: 180 mm   material thickness - plunge cut grinding: 30 mm COMPONENT-FEEDER   Feeder Design: rotary Feeder ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW Scope of delivery: - Machine - div. flanges and used grinding wheels - Measuring control IONIC 17A Optional: - 270 pcs. grinding segments 22A 100 S 6 B20 - 289 pieces grinding segments 14C 80 L 10 B30 Machine is dismantled and stored

Double work and assembly table wood self-made, 1 table approx. 400x100t cm, 1 table approx. 300x100t cm, small contents consumables

Dowel sewn MAFELL DD 40 P