141,115 used machines on RESALE, but how to find them? Machine Search
SPECIFICATIONS: Saw blade spacing: max. 2800 mm Tilt: 0° - 90° Saw blade: Ø 350 mm Installed power: 2.2 kW x 2
SPECIFICATIONS: Saw blade spacing: max. 2400 mm Tilt: 0° - 45° Saw blade: Ø 200 mm Equipped with multi-function display Installed power: 1.18 kW x 2
This - APV Concentrate dosing line for UF. Is for dosing of Various products and has multiple dosing pumps with the complying tank for each dosing system, This is all controlled through the control panel with accuracy., Number Dosing systems: 6, Number Tanks: 5 , Steam Heating: With Regulating Valve , PHE: Heating Plate heat exchanger , Product Pumos: 2 , Situated: On stainless steel skid for easy transport , Connections: Exchange plate , CIP: Yes , Electrics: 3 ~ / 400 Vac , Available: Immediately
Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Manual length adjustment with digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation 800 kg
Two custom-made, yet reprogrammable and modifiable mixing and metering systems for 2-component polyurethane mixtures are available. 1) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2011, mixing head: MK650, output rate: 0.08g–0.15g/s, material: 2K PU foam, robot travel X/Y/Z: 1000mm/800mm/250mm, max. application speed at R=6mm: 9m/min, max. travel speed: 20m/min, max. acceleration: 5m/s², table dimensions X/Y: 485mm/700mm. 2) Gasketing and foaming system Sonderhoff DM 402, year of manufacture: 2018, mixing head: MK125MP, output rate: 0.5g–2g/s, material: Fermapor, robot travel X/Y/Z: 2500mm/1250mm/300mm, max. application speed at R=5mm: 13m/min, max. travel speed: 58m/min, max. acceleration: 10m/s², table dimensions X/Y/Z: 2x 1200mm/1250mm. Both systems include peripheral devices and systems for monitoring and controlling temperature, consistency, mixing, ref ...
Darusín 30 ton double girder bridge crane with 14 meter crane runway, columns manufactured by Darusín Kft, STREET. Year of manufacture: 2017. span: 9.1m lifting height: 7m crane runway length: 12.5 meters crane type: Street ZX1006 lifting speed: 1.3/0.3m /min travel speed: 20/2m /min voltage: 400v 50Hz 28A IP44 Control: 48 v with Crane Book
Dosing pump with 90 l/h flow rate Properties: Length 370 mm Width 200 mm Total height 430 mm Volume 90 L Engine power 0.43 kW Manufacturer: LEWA ecodos Manufacturer Serial No. EEK 0090 S11
Used head machine KÖNIG, type: Mini Rex Futura AB -in good bakery condition- - Head machine / dough divider: KÖNIG Mini Rex Futura AB - Knitting roller: SKG54 and RKG58 for round and square dough pieces - 2 rows - Weight range: 25 - 75 g for round - Weight range: 40 - 85 g for square ones - Capacity: max. 2,000 pcs./h - Band very good condition - Condition: Very good, ready to use Suitable for wheat and rye doughs (up to 40% rye content). Visits and test runs are possible by arrangement.
Lifting kneader KEMPER, type: F 75 ASL -overhauled- - for 75 kg flour or 120kg dough - incl. 2 tank cars - Incl. dust cover - Condition: technically very good, ready for immediate use -Refurbished - 6 months warranty Visits and test runs are possible by arrangement.
A double planer Cremona including a log turner and an optional milling head is available. Working width: 900mm. An on-site inspection is possible.
Used DIOSNA Lifting Kneader, Type: S 35 2G -In Bakery Condition- - for 35 kg dough or 20 kg flour - 2 speeds - Foot switch to turn on -Protective - Machine runs very smoothly - Technically tested and cleaned - Machine repainted - Kneading arm and kettle made of stainless steel Inspection and test run are of course possible by arrangement.
Dough laminator Manufacturer: Seewer Rondo Model: SSO 62 Dimensions: 305x115x120cm Electrical power: 1.1kW Voltage: 380V 50Hz Tape dimensions: 62x130cm
Used DIOSNA Lifting Kneader, Type: S 20 3G -In Bakery Condition- - for 20 kg dough - 3 courses - Rewired - Engine Newly Mounted - New V-belt - Machine repainted - Kneading arm and kettle in stainless steel - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.
CONTROLS CNC controls SIEMENS 840 C WORKING RANGE (DOUBLE DISC GRINDER) Grinding wheel diameter: 457 mm grinding width max. - throughfeed grinding: 80 mm material thickness max. - throughfeed grindin: 20 mm grinding width max. - plunge cut grinding: 205 mm material thickness - plunge cut grinding: 80 mm GRINDING SPINDLE 1 drive power: 23 kW GRINDING SPINDLE 2 drive power: 23 kW COMPONENT-FEEDER Feeder Design: rotary Feeder feeder velocity max.: 240 mm/min feeder velocity min.: 20 mm/min Scope of delivery: - Machine - emulsion tank new in 2012 Measuring control IONIC 17A
Chamber depth: 750mm, sealing bar configuration 2x 650mm per chamber, built-in, electrical connection 3 x 400/415V 50Hz, 3 x 220V 60Hz, weight approx. 650kg (with 300m³/h vacuum pump), packaging speed approx. 2–3 cycles/minute. Length: 1600mm, width: 1055mm, height: 1045mm, weight: 650kg. An on-site inspection is possible.
A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible.
grinding wheel diameter: 200 mm wheel width max: 32 mm grinding wheel hole diameter: 51 mm grinding wheel speeds: 2900 U/min engine output: 0,9 kW Double wheel grinder mounted on stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Capacity (ton) 315 Table size, mm 2500 x 1250 Slider stroke, mm 400 Shut height,mm 750 Strokes per min 25 Press weight, kg 50900
Key data: 500 mm, 45 °
The machine is fully functional, pictures are attached. On request, we will also be happy to send you an up-to-date video showing the machine in operation. Aluminum Double Miter Saw Make: Pressta-Eisele Type: LMS D 450/500 Classic Single II TU/6 Year of Make: 1995 Saw blade size: 450 or 500 mm min./max. cutting length: 240 / 6000 mm Cutting speed: 2820 rpm. Air pressure: 6-8 bar Drive power: 2 x 2.2 kW Weight: 1450 kg External dimensions: approx. 7500 x 1490 x 1790 mm Cuts: 45°-90° (adjustable both blades) Nozzle for suction approx. 70 mm with -Single II control can be positioned electronically -pneum. Clamping devices -pneum. Mist spraying device Good condition, fully functional, ready to plug in for subsequent and immediate use. If you are interested in purchasing the machine, please make us an offer that is subject to change.
Height=1.04 m, Overall length= 0.78 m, Overall width= 0.71 m, Net weight= 145 kg,
Height=1.54 m, Overall length= 1.52 m, Overall width= 0.92 m, Net weight= 960 kg,
grinding width: 32.0 mm max. dia. of grinding wheel: 250 mm grinding wheel size: 250 x 32 x 32 mm turning speeds: 2850 U/min Grain size: K 36 / K 80 engine output: 1.5 kW voltage: 400 V weight: 30.0 kg range L-W-H: 510 x 320 x 360 mm scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible.
Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible.
Height=1.15 m, Overall length= 0.85 m, Overall width= 0.7 m, Net weight= 83 kg,
Machine name: Polymer dosing system Manufacturer: PRO-ENTEC Type: RM2 Year of Make: 1998 Conveying / Dosing of: Liquid Polymer Capacity: 2 - 30 L/h Control: Yes Dimensions: L 1,150 x W 600 x H 1,600 mm Curb weight: 100 kg Technical documentation: No Condition: Used Price: On request
Extruder line Werner & Pfleiderer type ZSK with : Feeding system with forced agitated hopper Ø53x33D twin screw Manual filter changer, model CFM75 Rod granulation head 10 wires + 6 wires Immersion tank, model TI400/4 4 M Periplast dryer Granulator Sieving
Max. cutting length: 5,000 mm Max. saw blade diameter: 400 mm Digital length display Minimum quantity spraying device Pneumatic material tensioners Mitre cuts possible on both sides 2-hand operation
Pressing force: 4000kN, pressing pressure: 320bar, oil pressure: 250bar, blank holder force: 1600kN, blank holder stroke: 200mm, blank holder dimensions X/Y: 1000mm/800mm, blank holder ejector force: 160kN, ejector force: 63kN, ejector stroke: 100mm, overrun distance: 40mm, overrun time: 190ms. Documentation available. An on-site inspection is possible.
SPECIFICATIONS: Dowel: Ø 8 Capacity: 4000 dowels/hour
gebr. Double Bench Grinder Fabr. Griffin Diameter 200 mm Revolutions 3,000 rpm.
Rheon Twin divider Type: VX 202 Year of Make: 2008 With 1 or 2 Huge operation Weight range: 75gr - 1200gr Hourly output max. 400kg / h with flour shaker Star edge lubrication Funnel for max. 50Kg dough Stainless steel cladding Dough width at discharge: 1 row: approx. 130 - 150 mm 2 rows: approx. 65 - 75 mm Weighing range: 1 row: approx. 150 - 1200 gr 2 rows: approx. 75 - 600 gr Max. discharge speed per minute: 1 row: 20 pcs/min 2 rows: 40 pcs/min Rheon dimensions: Height: 185cm Width: 386cm (with table) Depth: 100cm with conveyor belt Table for working Working height: 98cm (adjustable) with ingredient container
Glass thickness: 3-19mm, glass dimensions: 140-2000mm, speed: 0.1-10m/min, installed power: 61kVA (49kW, 86.4A, 400V), max. glass weight: 6170kg, working height: 920mm, max. opening speed: 30m/min, with transfer module Bottero TRANSFER 500P, weight: 1t. An on-site inspection is possible.
Used head machine GULLIVER, type: IRIS 20 Special R -In very good condition / new parts- Dough-friendly, automatically operating dough dividing machine for the production of rustic rolls and breads in various shapes and Sizes. Square, triangular, diamonds, trapezoids and also ciabatta. - extra long inlay belt, for more dough - 2 new Mehler - Incl. 4 cutting rollers - Portioning and shaping of the dough by, easily and quickly replaceable, knife rollers - Best choice for processing doughs with high dough yield - This means that there is sufficient dough volume after freezing or interrupting proofing - Very space-saving due to foldable straps - Frame in stainless steel - Stepless adjustment of the speed - Display can be swivelled incl. several programs - Machine cleaned - Very good technical condition - Ready for immediate use Technical data: -El. Connection: 380 V, 5 ...
Spiral mixer KEMPER, type: SP150 AL -Refurbished- - Incl. 2 or 3 tank cars (overhauled) - Kettle for 240 kg dough or 150 kg flour - Condition: Very good, ready to use - 6 months warranty The kneader is dismantled into its individual parts and wear parts are replaced with original manufacturer parts.
Dough Weigher W&P, Type: Parta SN -Refurbished- - with double piston - everything completely overhauled - very good condition, as good as new - incl. 6 months warranty Visits and test runs are possible by arrangement.
Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.
grinding length: 6000 mm grinding width: 2200 mm workpiece height: 2000 mm column daylight: mm table surface area: 6000 x 2200 mm table speed -stepless-: 2 - 50 m/min workpiece weight: 15 t adjustment speed of cross-rail: 560 mm/min grind. wheel dimensions for face grinding: 63...200 mm grind. wheel dimensions for peripheral grind.: 315x50x76 mm grind. wheel dimensions for peripheral grind.: 400x40x127 mm adjustment range - horizontal: 500 mm swival range +/-: 60 ° total power requirement: 86 kW total wight: 130 t dimensions of the machine ca.: 22x7x4 m weight of the machine ca.: 56 t - Digital Read Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...
Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000
A double mitre saw from the Chinese manufacturer Mange Jixie with digital display is available. Power: 4.8kW, pressure: 0.8MPa, cutting length range: 480mm-6000mm, saw blade outer diameter: 500mm, inner diameter: 300mm, blade thickness: 4.2mm, number of teeth: 120, feed rate: 2-3m/min, blade speed: 2840rpm, weight: approx. 1800kg. An on-site inspection is possible.
Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)
Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)
Komptech Crambo 6200 E Direct Category: Wood & Green Waste Shredder Specification: Category: Stationary Twin-Shaft Shredder Serial/reference number: 495005 Power: 280 kW Weight: 17 200 kg Emission class: electric drive In need of repair Equipment and description: Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket
Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
