128,430 used machines on RESALE, but how to find them? Machine Search
A high-precision Takisawa CNC lathe with double spindles is available. Spindle power: 2x 7.5kW, speed: 5000rpm, spindle nose: F-80, tool holder: 2x 5 places, max. turning diameter: 50mm, max. turning length: 50mm, max. workpiece weight: 2x 0.5kg. Machine dimensions X/Y/Z: approx. 2600mm/2550mm/2150mm, weight: approx. 4300kg, control: 2x Fanuc Oi-TF, operating hours: 11179h. Including hinged belt conveyor to the rear, automatic central lubrication, machine cladding with coolant pump, portal loader type D, Raku Raku loader, turning station, automatic loading and unloading door per spindle and storage chute for test part. Documentation available. On-site inspection is possible.
Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible.
An NC mitre saw Omga S.p.A. is available. Speed: 3000 rpm, saw blade diameter: 300 mm, saw blade bore: 30 mm, max. cutting height: 60 mm, max. cutting width: 60 mm, max. feed: 1250 mm, angle adjustment: 45°/30°/22.5°, machine dimensions X/Y: approx. 5600 mm/1250 mm. Documentation available. On-site inspection is possible.
Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm
pressure: 63 t distance between columns: 650 mm stroke: 200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...
grinding height: 60 mm grinding width: 120 mm grinding wheel diameter: 600 mm grinding length: mm workpiece height: 60 mm total power requirement: 50 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 ______________________________________________________________________ ________ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 1 ...
grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...
pressure: 10 t distance between columns: 500 mm stroke: 200 mm total power requirement: 10 kW weight of the machine ca.: 4.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 125 t distance between columns: 1050 mm stroke: 250 mm total power requirement: 40 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2800 mm swing diameter: 3200 mm turning height: 1500 mm slide adjustment: 1200 mm turning speeds: 50 U/min Control: Sienens 840 D side head - cross travel: 900 mm power capacity: 55 kW : workpiece weight: 16 t total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The engine was rebuilt in 2008/2009 to CNC control Siemens 840 D. The right support is operated CNC and the face plate. The left side of the support and assistance are conventional. Acu Rite Digital Display The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling ...
pressure: 500 t column daylight: 2600 mm stroke: 800 mm table surface area: 6000 x 3000 mm : max. 800 mm adjustment of press crosshead: 5200 mm slide adjustment -horizontal: 1800 mm Capacity: 162 l/min feed down: 9 mm/sec feed up: 14 mm/sec total power requirement: 45 kW weight of the machine ca.: 50 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Chamber dimensions X/Y/Z: approx. 460mm/550mm/200mm, welding bars: 4, welding bar length: 440mm, welding seam: double-seam separation sealing, machine dimensions X/Y/Z: approx. 1000mm/950mm/1100mm, weight: approx. 600kg. On-site inspection is possible.
A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.
Internal chamber dimensions: 850x720x200mm, cycle output: 2-3 cycles/minute, depending on product size and vacuum, length of sealing bar: 830mm, connected load: 5.5kW, control: WEBOMATIC System 4000, length: 1865mm, width: 870mm, height: 1200mm. The machine was recently inspected and serviced. On-site inspection is possible.
Key data: 550 mm
Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 255 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device
Vertical packaging machine with piston pump for dosing liquids. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available ...
Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton
Vertical packaging machine with auger dosing unit for powders. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available i ...
Pressure total: 400 ton Ram stroke: 500 mm Slide adjustment: 350 mm Daylight: 1250 mm Table surface area : 2500 x 1500 mm Slide area: 2500 x 1500 mm Die cushion capacity in table: 80 ton Die cushion stroke: 250 mm Number of strokes: 15 - 30 s.p.m. Die weight at the ram max.: 4000 kg Required power: 70 kW Height over floor approx.: 8000 mm Weight of machine approx.: 150 ton
Vertical packaging machine with piston pump for dosing liquids. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50ml | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L900xW700xH1850mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packa ...
Offer 25115 Radial arm - Schiffterschnitt - Pendulum train saw Specifications: - Saw blade diameter 400 mm - Saw blade speed 3000 rpm - Cutting height up to approx. 125 mm - Cutting depth up to approx. 600 mm - Mitre adjustable in 2 axes - Table size approx. W 800 x D 800 mm - Table height 920 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 800 x H 1900 x D 1100 mm - Weight approx. 200 kg
Vertical packaging machine with volumetric cup filler for granules. Especially for customized pouches with regular or irregular shapes such as round pouches, bottle-shaped pouches, etc. The sealing jaws are manufactured according to the specific bag layout. PLC controlled, operation via touch screen. - Specifications: bag sizes: pillow bags: 3-side or 4-side seal pouches: L(40-170)xW(20-110)mm | suitable film width: 220mm | suitable film: composite film, heat sealable | dosing range: 1-30g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2,8kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L930xW750xH1920mm | weight: 350kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are availa ...
Vertical packaging machine with auger dosing unit for powders. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH2050mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packagi ...
Vertical packaging machine with volumetric cup filler for granules. Equipped with a punching module for sealing corners (cross sealing) with a rounded shape. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(40-160)xW(20-100)mm, 3-side or 4-side seal pouches: L(40-160)xW(20-100)mm | suitable film width: 240mm | suitable film: composite film, heat sealable | dosing range: 1-50g | max. speed of the machine in neutral: 60 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L800xW960xH1900mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pa ...
Vertical packaging machine as a high-speed version with piston pump for dosing liquids. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from ...
Vertical packaging machine as high-speed version with auger dosing unit for powder. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 150 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...
Vertical packaging machine as high-speed version with volumetric dosing unit for granulates. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, cross sealing driven by servomotors. - Specifications: bag sizes: pillow bags: L(20-145)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-145)xW(30-120)mm | suitable film width: 240mm | suitable film: composite film, heat sealable (monofilm on request) | dosing range: 1-50g | max. speed of the machine in neutral: 120 cycles/minute | power supply: 220V, 50Hz | power consumption: 5kW | air pressure: max. 0.6MPa | dimensions: L900xW700xH170mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately ...
Vertikale Verpackungsmaschine mit Schneckendosiereinheit f?r Pulver. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L600xW720xH1590mm | weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...
Vertikale Verpackungsmaschine mit Kolbenpumpe f?r das Dosieren von Fl?ssigkeiten. Folgende Beuteltypen sind konfigurierbar: Schlauchbeutel mit R?ckennaht, 3-Randsiegelbeutel oder 4-Randsiegelbeutel (Aufpreis). SPS gesteuert, Bedienung ?ber Touchscreen, pneumatisch angetriebene Quersiegelung. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100ml | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1720mm | weight: 300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 differe ...
Vertical packaging machine with volumetric cup filler for granules. The following bag types can be configured: pillow bags, 3-side sealed bags or 4-side sealed bags (surcharge). PLC controlled, touch screen operation, pneumatically driven cross-sealing. - Specifications: bag sizes: pillow bags: L(20-160)xW(20-110)mm, 3-side or 4-side seal pouches: L(20-160)xW(30-120)mm | suitable film width: 240mm | suitable film: mono-material or laminated, heat sealable | dosing range: 1-100g | max. speed of the machine in neutral: 50 cycles/minute | power supply: 220V, 50Hz | power consumption: 2kW | air pressure: max. 0.6MPa | compressed air consumption: 2m?/h | dimensions: L700xW600xH1600mm | weight: 280kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediatel ...
Rexroth Pump Axial Piston Pump AKP140R with Valve for ANGELS refurbished Type: AKP140R with valve Manufacturer Part Number: R901021899 Type code: SYDFEE-20/140R
A Varpe double-track scale including a Loma metal detector is available. Accuracy class: XIII(1), scale division: 1g, readability: 1g, product weight min./max.: 30g/500g, cadence: 103rpm, speed: 0.5m/s. Documentation available. On-site inspection is possible.
MANOTRAD Dough divider for traditional handicraft products for exceptional bread/pastry quality Robust dough divider for flexible use Press plate, cutting and punching grid can be easily replaced Manual dividing and shaping of dough from direct processing to long-term management Pull-out holder for the dough tray Device is space-saving and can store 4 inserts No power connection necessary, maintenance-free New device Standard with: 1 cutting grid, 1 punching grid, 1 dough tub, 1 flour container, 2 silicone pads We have many more bakery equipment in stock!
It is a used, reconditioned WP conical rounder CR 59 H for sale. The conical rounder was completely dismantled and rebuilt, the bearings have been renewed. The gutters and the cone have been newly Teflonized to a high standard. - with lubrication - with heater and blower - Input: 6 a.m. / Output: 12 p.m. A video can be sent on request. Price on request.
It is a used Kemper head machine Quadro-Round for sale. The machine is functional. For the production of rustic, square and round buns. Price on request.
5,7 litre, Stock number: R1183, Double planetary mixer, stainless steel,, Ross type LDM-2., Double jacket., Variable speed 20-100 rpm., Removable pot., Litre: 5,7, Material: Stainless steel AISI 304
Used dough weigher W&P, type: Parta U -completely overhauled- - W&P Parta U1 with 1 cylinder for dividing - Capacity: max. 1,500 pcs./h - Weight range: 300 - 2,800 g - Machine completely disassembled, all wear parts renewed - Condition: Very good, like new - 6 months warranty Visits and test runs are possible by arrangement.
Dough divider RHEON, type: Twin DIvider 400 VX 202 -completely overhauled- Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Tested starting width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - The machine was dismantled into all its individual parts and wear parts were replaced - Condition: Perfect, like new - Warranty: 6 months Visits and test runs are possible by arrangement.
Code: 0149 Brand: STEMA - 2BR Model: INSERMATIC CB/JUNIOR 86 Manual drilling and inserting machine for hinges or plates for kitchen, bathroom, custom furniture, panels and various Upright frame with table 1 mt Electropneumatic drilling unit with Hp 2 motor 3000 rpm Drilling head with 3 spindles for hinges Hinge housing pad N° 3 stops placed on table Dust collector complete with bags Foot pedal for start Voltage 400 V - 50 Hz Overall dimensions mm 1000 x 1100 x 1750 h Weight kg 130
Stock number: F1072, Double labelling machine, stainless steel,, Fuchen type BX, year 2020., Ex secured Exde II B,, for front and back labelling., With self-adhesive labels,, max label height 190 mm., Alignment, sideband, top band,, throughout lamella conveyor W 83 x L 3000 mm., Material: Stainless steel AISI 304, Label: Max label height 190 mm.
Stock number: F507, Double labelling machine,, Collamat 70., Suitable for self-adhesive labels., Front and back label mounting., Max. label height 150 mm., Conveyor W 100 x L 1950 mm., Top conveyor., Label: Max. label height 150 mm.
Stock number: D826, Double conveyor, stainless steel,, rolling conveyor., Automatic stop for subject boxes., Excl. steering., L 1600 x W 150 x H 880 mm., Material: Stainless steel AISI 304, Dimensions: L 1600 x W 150 x H 880 mm.
Stock number: SF200, Cartridge filter, stainless steel,, Domnick Hunter type ZVA-011-CTE., Max. working pressure 10 bar., max. working temperature 145° C., Ø2 connections., Excluding filter cartridge., Material: Stainless steel AISI 304
1,5 litre, Stock number: R1196, Double plantary mixer, stainless steel/coated,, Ross type DPM-1P., 0,37 kW motor with variable speed,, 380 V., Work capacity 0,25-0,5 litres,, pneumatic height adjustable function., Prepared for vacuum., Litre: 1,5, Material: Stainless steel AISI 304/coated
Stock number: SF140, Inline filter, stainless steel,, Domnick Hunter type VSLCE031CTBo4, For 3 filter Cartridges., 11 litre, 2 connection, Ø 200 x L 300 mm., Material: Stainless steel AISI 304
Stock number: F925, Double labelling machine,, Eurokett, 240 series, system 612., For mounting of self-adhesive labels, on the front and bag., Max label height 160 mm., Lamella conveyor W 113 x L 2500 mm., Automatic guide,, top belt., Label: Max label height 160 mm.
Stock number: F825, Double digital scale, stainless steel., Joint Avery Berkel L 225, wall display with printer., Scale 1:, Weighing area 0-3 Kg., Interval 0,001 Kg., Weighing plate L 300 x W 400 mm., Scale 2:, Weighing area 3-15 Kg., Interval 0,002 Kg., Weighing plate, L 900 x W 900 mm., with ramp., Material: Stainless steel AISI 304, Weighing area: S1; 0-3 kg. S2; 3-15 kg., Interval: S1; 0,001 kg. S2; 0,002 kg.
maximum number of results exceeded
please refine your search
