do all used for sale

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 500 ton Stroke: 1100 mm Daylight: 1500 mm Table surface area : 2000 x 1250 mm Slide area: 2000 x 1250 mm Die cushion capacity in table: 160 ton Die cushion stroke: 300 mm Approach speed: 650 mm / sec Required power: 55 kW Weight of machine approx.: 50 ton

used side feeder for foil snippets / scrap Centrifuge with drive and feed container this unit was mounted on a 150 mm extruder Capacity over 320 kg/h

Bruton BIG T Dough divider Stainless, screw fed, with guillotine, variable speed, belt is 1200mm x 200mm, blade width 130mm, Production Rate Examples:; 2oz (56gms); Single Formation; Up to 1,800 per hour; Twin Formation; Up to 3,600 per hour; 4oz (113gms); Single Formation; Up to 1,800 per hour; Twin Formation; Up to 3,600 per hour; 11b (256gms); Single Formation; Up to 1,200 per hour; 8in (203mm); Quiche; Up to 1,200 per hour;

Manufacturer: Torwegge, Type: H634.1, Year: ca. 1996, Year :ca. 1996

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Work bays: 1, Working length max mm: 800, Dovel diameter mm: 6, Number of doveling tools: 6, Drilling beam swivel-mounted: no, Number of drill spindles: 25, Lochraster: yes, Drilling engine kW: 1,2, Working range max mm: 60, Dovel insertion: yes, Work piece clamping: yes, Work piece support: yes, Work stations: 2, Drilling depth: 50, Drilling hight: 50, Year :1994

Manufacturer: Homag, Type: FL 62/25, Year: 1988, Maschinensteuerung: Homag, Min.-max. workpiece length in mm: 250-1500, Min.-max. workpiece height in mm: 3-80, Cam distance mm: 900, Feeding speed min-max m/min: 5-40, Feed stepless: yes, Min-max protrusion of workpiece mm: 30, verängerte Kette mm: 900, Nockenaushebung: no, gesteuerte Fräsaggregate: 2, Scoring saw controlled: yes, 1st milling unit kW / rpm: 4,5/5890, 2nd milling unit kW / rpm: 4,5/5890, Year :1988

Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,

Manufacturer: Mekanika, Type: Nut und Federfräse, Year: unbekannt, Work piece width min-max mm: 10-250/300, Working width min-max mm: 10-ca.300, Working hight min-max mm: 10-30, Feeding speed min-max m/min: pneumatisch, Overall milling units: 3 +2, 1st milling unit kW / rpm: 2,5/2580, 2nd milling unit kW / rpm: 2,5/2580, 3rd milling unit kW / rpm: 2,5/2580, 4th milling unit kW / rpm: 2,5/2580, 5th milling unit kW / rpm: 2,5/2580, Diameter of the spindle mm: 30, Diameter of the spindle mm: 30, Year :unbekannt

Manufacturer: Düspohl, Type: DEA 150, Year: ca.1995, Control: hand, Pneumatical clamping system: yes, Schnitthöhe min-max mm: 120, Schnitttiefe min-max mm: ca.150 -150, Power saw engine kW: ca.3, Action controlled: yes, Saw blade diameter max mm: 350, rotations controlled: 4500, Year :ca.1995

Manufacturer: Celaschi, Type: TSA 520, Year: 1987, Maschinensteuerung: max. 290, Motore Maschine 1: 150, Magazine: 150, Schrumpftunnel: 2x3, Min.-max. workpiece height in mm: 5,5, Working hight min-max mm: 5,5, Cam distance mm: 5,5, Year :1987

Manufacturer: Friulmac , Type: Quadromat S, Year: 2010, Machine no 1: yes, Motore Maschine 1: 3, Machine 2: yes, Motore Maschine 2: 3, Conveyor: yes, Work piece width min-max mm: 207-800, Min.-max. workpiece length in mm: 250-2010, Min.-max. workpiece height in mm: 7-22, Feeding speed min-max m/min: 10-90, Feed stepless: yes, Overall milling units: 3+3, Year :2010

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,

Manufacturer: Homag, Type: NFL 26/6/10/PW/L, Year: 2002, Control: Homag, Work piece width min-max mm: 136-250, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-25, Working width min-max mm: 136 - 250, Feeding speed min-max m/min: 15 - 60, 1st milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 2nd milling unit kW / rpm: Ritzen 4,5 kW/6000 U/min, 3rd milling unit kW / rpm: 6,6 kW Profilfräsen 6000 U/min, Free space for units: 2x 460 mm, Machine overhauled: no, System dismantled: yes, Year :2002

Manufacturer: Unbekannt, Year: ca.1985, Saw blade tiltable up to °: 45-90 und Schifterschnitt, Schnitttiefe min-max mm: 90, Schnittlänge min-max mm: ca.3500, Power saw engine kW: 0,75, Width adjustment manually: yes, Action controlled: yes, Saw blade diameter max mm: ca.250, rotations controlled: ca.4500, Vacuum clamping system: Pneumatisch, FREE TEXT: Hydropneumatischer Vorschub Sägen, Year :ca.1985

Manufacturer: Haffner, Type: DGS 202E 6000, Program control: yes, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnittlänge min-max mm: 400-6000, Power saw engine kW: 2,2, Width adjustment by engine: yes, Saw blade diameter max mm: ca.500, rotations controlled: 2850,

Manufacturer: Hoffman Dübelfix, Type: DEA , Year: 1995, Control: hand, Beleimwerkzeuge: 1, Dovel insertion: yes, Dovel diameter mm: 6 X 30, Niederdruckleimsystem: yes, Year :1995

Manufacturer: Stemas, Type: 03 TFRD, Year: 2010, Automatisches Rüsten: yes, Automatic width adjustment: yes, Rotating the workstations degree: 45, Work piece width min-max mm: 30 - 100, Min.-max. workpiece length in mm: 200 - 3000, Min.-max. workpiece height in mm: 16 - 30, Sawing station: 2, Saw blade size mm: 250, Holder mm: 30, Engine power kW: ca. 3,5, rpm spindle speed: 6, Drill supports from behind: 4, rotations controlled: 6000, Manufacturer: Stemas, FREE TEXT: 2017 überholt, Year :2010

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Software: 1, Barcode: 800, Min.-max. working length in mm: 6, Min.-max. workpiece thickness in mm: 4, Variable support centre-to-centre distance mm: no, Drilling support horizontal: 25, Drill gearings: yes, Drilling supprt from bottom: 1,2, Drill gearings: 60, Drill gearings: yes, Drilling beam swivel-mounted: yes, Belt infeed: yes, Lochraster: 2, Working range max mm: 50, Part performance max/min: 50, Year :1994

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

Manufacturer: KOCH, Type: DL 60, Year: ca.1992, Control: umgerüstet auf elektronische Leimventile, Work bays: 1, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 40, Min.-max. workpiece height in mm: 2800, Work piece depth mm: 800, Work piece width min-max mm: 60, Feeding speed m/min: ca.40, Centre support: no, Beleimwerkzeuge: 6, Dovel insertion: yes, Dovel diameter mm: 8, Work piece clamping: pneumatisch, Low-pressure gluing system: 2, Year :ca.1992

Manufacturer: Koch, Type: Compact, Year: 1994, Control: NC, Work piece width min-max mm: 200, Min.-max. workpiece length in mm: 150-2100, Min.-max. workpiece height in mm: 10-80, Saw diameter mm: 400, Drilling support horizontal: 2, Drilling gearbox number horizontal: 2, Drilling supprt from bottom: keine, Drill spindles per support: 5, Drill-beam 90° swivel mounted: yes, Grid 32 mm: 17/22/35/30/124, Year :1994

Manufacturer: Koch Säge Bohr und Dübelanlage, Type: SBD-30-A, Year: 1991, Control: Koch, Work piece width min-max mm: 30 - 130, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 20 - 40, Saw diameter mm: 300, Drilling gearbox number horizontal: 2, Re-charging: yes, Dovel insertion: yes 10-12 mm, Workpiece magazine: yes, Work piece refeeding: yes, Glue monitoring: yes, Drill spindle pitch mm: 17/22/30/35, Year :1991

Manufacturer: Hüllhorst, Year: ca. 1970, Control: hand, Width adjustment manually: yes, Action controlled: no, Cutting width max mm: 1200, Sägeblätter schwenkbar bis ° : no, Cutting hight max mm: ca.100, Cutting lenght max mm: 140, rotations controlled: 6000, Saw blade diameter max mm: 450, Main engine kW: ca.4, Year :ca. 1970

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

Manufacturer: Hoffmann, Type: DEA, Year: ca.2000, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Glue high-pressure pump: Niederdruckbehälter, Glue quantity setting: yes, Dübeln horizontal: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dübelgrösse mm: 8 X 30, FREE TEXT: Maschine wird gereingt und geprüft vor Auslieferung, Year :ca.2000

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: ca.1984, Control: Hand , Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Schnitthöhe min-max mm: ca. 70, Schnitttiefe min-max mm: 100, Schnittlänge min-max mm: 3500, Power saw engine kW: 3 KW,100 Hz, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Bohreinheit Horizontal: 100, On customer order: inkl. Bohrstation, Year :ca.1984

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985

Manufacturer: Homag , Type: KF 20/13/QA/10 + KF 20/15/25/QA, Year: 1997, Control: Homatic, Min.-max. workpiece height in mm: 8 - 60, Machine no 1: KF 20/13/QA/10, Angular transfer: TD 31/25/08, Machine 2: KF 20/15/25/QA, Arbeitsbreite Maschine min - max mm 1: 240 - 1000, Arbeitsbreite Maschine min - max mm 2: 240 - 2500, Cam distance mm: 500, Feeding speed max m/min: 10 - 40, Premilling: KD 10, Edge magazine: 2, Mitre stations: HL 04, radius milling: 0,5 kW, Buffing unit: 0,25 kW, Buffing unit: 0,25 kW, Top pressure belt/roller: Riemen, Year :1997

Manufacturer: Doppelgehrungssäge, Type: DKG 400 A, Year: 1984, Control: Hand / Teilautomatik, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45-90, Cutting hight max mm: ca. 70, Cutting lenght max mm: 2500, Power saw engine kW: 3, 100 Hz, Width adjustment manually: yes, Width adjustment by engine: yes, Action controlled: yes, Saw blade diameter max mm: 300, rotations controlled: 4500, Exhaust diameter mm: 100, inkl. Bohrstation, Year :1984

Manufacturer: Okoma, Type: SF3 SFA , Year: 1983, Control: elektronisch, Controlled lenght stopper: no, 4-fach Konterholz: 2-fach, Studioeinrichtung Winkel: yes, Nutspindel: yes, Diameter of the spindle mm: 40, Length of tenoning spindle mm: 250, Tool travel range tenoning spindle: 2, Moulding spindles: 1, 1 length of profile spindle in mm: ca.200, Spindle for fittings groove mm: yes, Diameter of the spindle mm: 40, Constant stroke mm: 68, Main engine kW: ca 7,5, Outer profiling package: yes, Horizontal spindle clocked: yes, Work piece re-charging: no, Year :1983

Manufacturer: Düspohl, Type: DGK 400, Year: 1980, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 45 - 90, Cutting hight max mm: ca. 70, Max. cutting depth in mm: 150-2600, Max. cutting depth in mm: 150-2600, Power saw engine kW: 2,2, Width adjustment manually: yes, Saw blade diameter max mm: 300, rotations controlled: 5800, Exhaust diameter mm: 100, Year :1980

AUDATECH (GEMMA GROUP) double head electronic cut-off machine model DH550: - for cutting PVC, aluminium, wood-aluminium profiles - all electronically managed: touch-screen programmer model TS9003, windows operating system, with USB socket for downloading cutting lists and with office ethernet connection - fixed left head, and mobile right head with automatic sliding on THK guides and with brushless motors - blade diameter 550mm, with micro-drop cutting lubrication - inclination of the heads from 22.30° to 157.30° managed by CNC - cutting length between the two blades from 380 to 4000mm - for cutting lengths greater than 4 m: possibility of automatic workpiece recovery by means of the moving head - 4 adjustable horizontal pneumatic clamps - 2 adjustable vertical pneumatic clamps - pneumatically operated central intermediate support - Profile support roller conveyor combined  ...

Manufacturer: Scheer, Type: DB 10, Control: Hand, Drilling beam swivel-mounted: yes, Number of drill spindles: 3, Working length mm: 2200, Lochraster: 22,5, Drilling engine kW: 0,75, Working range max mm: 65, Work piece clamping: pneumatisch, Work stations: 2, Wight approx. kg: 400,

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984

Manufacturer: Haffner, Type: DGS 124, Bauyeshr : 1994, Pneumatical clamping system: yes, Sägeblätter schwenkbar bis ° : 45-90-45, Schnitthöhe max mm : ca.150, Schnittlänge max mm : 200, Schnittlänge max mm : 200, Power saw engine kW: 2,9, Width adjustment by engine: yes, Saw blade diameter max mm: 500, rotations controlled: 2800, Year :1994

Manufacturer: Koch, Type: DL 80, Year: 1982, Control: Elektrisch, Work bays: 1, Work piece thickness mm: 40, Werkstücklänge mm: 180-2500, Work piece depth mm: 800, Work piece thickness mm: 40, Feeding speed m/min: 60, Mittenunterstützung: yes, Lochraster: 32, Beleimwerkzeuge: 12, Dovel insertion: yes, Work piece clamping: pneumatisch, Work stations: 1, Wight approx. kg: 3000, Year :1982

Key data: 500 mm

Max. saw length: 5,000 mm Max. saw blade diameter: 500 mm Automatic positioning of the length as well as motorized angle adjustment inwards and outwards Moving roller conveyor Material support Minimum quantity spraying device Weight: 1800 kg

Key data: 500 mm

Double mitre saw Pertici Type: UNIVER 502D2 Year of Make: 1998 Cutting of aluminium and PVC profiles Cutting length 360 – 6000 mm Cutting width max. 150 mm Cutting height max. 350 mm Saw blade diameter D 500 mm Saw blade revolutions 2800 rpm. Saw blade bore d 30 mm Saw blades swivel from 90° to 45° to 0° Motor powers: 2.2 + 2.2 kW Connected load 4.5 kW, 380 volts 50Hz Automatic feed and cutting process Saw automatically moves to the entered dimension and cuts automatically Control panel with digital display for cutting dimension was used for cutting aluminum square tubes in the Windows and conservatory construction Good working condition, exact cut Dimensions 7200 mm x 1200 mm x H 1700 mm Weight: 1980 kg

Used pastry machine CANOL, type: CA-L -in bakery condition- - Dough preparation CA-L (built in 2001) - Calibration unit TS/0 (built in 2002) -Longitudinal section -Guillotine - Incl. many cutting tools (cutting rollers) - incl. band C/L (built in 2001) The system was still in use until recently and works without any problems. Visits and test runs are possible by arrangement.

Used dough weigher Rheon VX212 Twin Divider from 2009 optionally with belt table including frequency controller for sale. The machine is visually and technically in good condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. The Rheon dough divider weigher can optionally be offered as a completely overhauled version. - Year of construction 2009 - 800 kg per hour - Accurate dough weighing - With digital control panel - with program memory - Machine is checked and cleaned - Trade-in and delivery on request - Machine can be inspected in our warehouse and be tested

Lenght 6 m E355 positioner controller Saw diameter 420 mm

Used Lifting Kneader KEMPER, Type: F125 ASL -Refurbished- - for 200 kg dough / 125 kg flour - Incl. 1 tank car - 2 speeds -Timer - All wear parts renewed (bearings, belts, etc.) - Condition: Very good, overhauled, ready for immediate use - 6 months warranty Visits and test runs are possible by arrangement.

Sigma mixer with a gross trough volume of 8 l., drive via Bauer gear motor with 1.1 kW, trough manually tiltable for emptying. Parts in contact with the product made of stainless steel. Very good condition.