do all used for sale

Type: C30-3K11 7,5 kW buisdia: 280 mm

Type: C30-3K11 7,5 kW buisdia: 280 mm

drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42 / 28 / 21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel dia. x width: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min total power requirement: 3,3 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 1,0 x 1,0 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph

; Gross weight [kg]: 6250; Engine: Doosan DP222LC; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 1250

hobbing length: 2100 mm milling width: 300 mm max. module: 16/18 min. module: total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

Doppstadt AK 635 Compact - Built in 2013 - Hours 4839 - Permissible total weight 25,000 kg - Mercedes Benz diesel engine 635 hp at 2,000 rpm - AD BLUE - Load-dependent control of the material feed incl. automatic scraper floor reversal - Separate drive of feed roller and scraper floor (twin drive) - Fuel tank 750 litres - Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments - Auxiliary hydraulic connection 11 cm³ - Rear hinge: wheelbase 6,150 mm, - Scratching floor with 34 strips - Overbelt magnet -Radio remote control incl. transmitter, receiver, - Strainer basket Machine is overhauled and immediately available

; Gross weight [kg]: 1950; Engine: Doosan P086TI-1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

Dobot collaborative robot Cobot CR 3 - new Range: 620mm Payload: 3kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing M ...

Dobot collaborative robot Cobot CR 16 - new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing ...

Dobot collaborative robot Cobot CR 16 with SafeSkin- new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grindi ...

Dobot collaborative robot Cobot CR12 - new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With multiple I/O ...

Dobot collaborative robot Cobot CR12 with SafeSkin- new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With ...

Dobot collaborative robot Cobot CR5 - new Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing Mu ...

Dobot collaborative robot Cobot CR10 - new Range: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing  ...

Dobot collaborative robot Cobot CR7 - new Collaborative robot series Payload 7kg Reach: 800mm Axes 6 The CR7 robotic arm is an automation solution designed for industrial and educational purposes. DOBOT's CR7 series can be adapted to various applications and is easy to use and quick to perform. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also becau ...

Dobot collaborative robot Cobot CR7 with SafeSkin - new Collaborative robot series Payload 7kg Reach: 800mm Axes 6 The CR7 robotic arm is an automation solution designed for industrial and educational purposes. DOBOT's CR7 series can be adapted to various applications and is easy to use and quick to perform. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools,  ...

x-travel: 450 mm y-travel: x mm z-travel: x mm grinding wheel diameter: 175 mm weight of the machine ca.: 0.2 t Turning tool holder Dividing head with collets Table support D-140mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gear, stin gear -Drive shaft: Ø 28.7 mm -Output shaft: Ø 44.2 mm -Dimensions: 420/320/H280 mm -Weight: 77 kg -Translation: 1: 14

We offer a Doka Framax Xlife plus 163.67m² with a 65% discount. Original value: €112,280.00 - Special net price €39,298.00 + VAT Complete with accessories on request. Formwork completely cleaned, checked and sorted. Formlining exposed concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value operations. Piece designation 1 Framax Xlife plus Element 2,70x3,30m 8 Framax Xlife plus Element 1,35x3,30m 8 Framax Xlife plus Element 0,90x3,30m 6 Framax Xlife plus Element 0,75x3,30m 5 Framax Xlife plus Element 0,60x3,30m 2 Framax Xlife plus Element 0,55x3,30m 17 Framax Xlife plus Element 0,45x3,30m 1 Framax Xlife plus Element 0,30x3,30m 4 Framax Xlife plus-Element 1,35x2,70m 2 Framax Xlife plus-Element 0,90x2,70m 1 Framax Xlife plus-Element 0,75x2,70m 6 Framax Xlife plus-Element 0,60x2,70m 2 Framax Xlife plus-Element 0,55x2,70 ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding wheels: Diameter: 175 mm Bore: 24 mm Clamping range of the tools: Width: 25 mm Height: 25 mm Diameter: 20 mm Voltage 50 Hz 3x: 380 Volt Power: 0.8 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 900 mm Width: 600 mm Height: 1400 mm Various accessories: Coolant system Lamp

Rapid radial / Rapid radial / Snel radial DANUBE DR 13

Capacity (x): 0 Process Application: 0   Other Info: 0

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Voltage 50 Hz 3x: 400 Volt Installed power: 1.1 kW Weight: 75 kg Dimensions: Length: 1100 mm Width: 650 mm Height: 900 mm

various hydraulic parts in stock - mostly unused sometimes several quantities available - ULTRA 3-fold pump - DOWTY tandem pump - DOWTY gear pump - SAUER DANFOSS pump - ULTRA hydraulic motor - BOSCH gear pump - RELATED FLUIDS volume divider - NIMCO/WEBTEC valves - Control/control block/control valve

hobbing length: 1750 mm milling width: 260 mm max. module: 10 min. module: 12 total power requirement: 8 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m D O N A U - K N A P P (Germany) Universal Automatic Rack Milling Machine Model UZFM – V 300 H Year approx. 1980 Serial No. 80-234x Max. length of rack 1,750 mm Milling travel / milling width cross max. 260 mm Module, steel / cast iron 10 / 12 Table clamping size 275 x 1,850 mm Mounting height below cutter, depending on cutter Ø 136 – 410 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 160 mm Cutter width max. floating / with support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling right / left 30 / 45 ° 9 spindle speeds 22 � ...

Item condition: maintained Availability: immediately Printheads clean and rinsed: yes The A300 offers consistently high quality – across a variety of formats – even in the harshest environments. The robust and durable housing made of 316 stainless steel offers excellent protection against dust and water. Thanks to the unique self-cleaning ink system and our patented SureStart operation with a single press, the total cost of ownership is low with minimal operator intervention. It's the perfect choice when you need a rugged, flexible printer that offers maximum productivity.

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding wheels: Diameter: 175 mm Width: 20 mm Voltage 50 Hz 3x: 380 Volt Power: 0.6 HP Overall dimensions machine: Length: 1000 mm Width: 800 mm Height: 1400 mm Various accessories: Coolant system Lamp

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Aspirated air: 500 m3/min Voltage 50 Hz 3x: 400 Volt Installed power: 0.75 kW Weight: 39 kg Dimensions: Length: 800 mm Width: 500 mm Height: 550 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Aspirated air: 500 m3/min Voltage 50 Hz 3x: 400 Volt Installed power: 0.75 kW Weight: 39 kg Dimensions: Length: 800 mm Width: 500 mm Height: 550 mm

Product number: 2226 Type: VV-5-1000 Serial number: 013 Drum volume: 2200 liters Capacity: max. 1000 kg Power: 3 x 380V, 50Hz, 3.2kW Dimensions: 1800 x 1950 x 1950 mm Weight: 800 kg

Safety control -Type: BH5919.54/001 -DC24 V +AC 50/60 Hz 230 V -Weight: 0.5 kg

Tires, tractor tires, lawn mower tires -Tire size: 15x6.00-6 -Number: Two available -Price: per piece -Dimensions: Ø 340 mm, height 140 mm -Weight: 4 kg

Technical data Grinding wheels: Diameter: 175 mm Bore: 24 mm Clamping range of the tools: Width: 25 mm Height: 25 mm Diameter: 20 mm Voltage 50 Hz 3x: 380 Volt Power: 0.8 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 900 mm Width: 600 mm Height: 1400 mm Various accessories: Coolant system Lamp

Turning diameter: 575 mm Turning length: 1300 mm Turret positions: 0 CNC Brand: Fanuc CNC Model: 18 T SPECIFICATIONS Swing over bed Ø  575 mm Control   Fanuc 18 T Swing over cross slide   370 mm Distance between centres  1300 mm Spindle bore77 mm Spindle speeds / ranges  3500 Rpm DIMENSIONS Length   4000 mm Width  1980 mm Height  2098 mm The used lathe Doosan Puma 250 LMB type with CNC Fanuc 18 T  

Drilling capacity: 40 mm Radius: 800 mm Spindle taper: 36   SPECIFICATIES Uitlading / arm lengte 800 mm Boor capaciteit 40 mm Boor capaciteit staal Ø 40 mm Boor capaciteit gietijzer Ø 50 mm Tap capaciteit M  M 36 Spindel pinole opname Mk  Sk 40 Spindel diameter Ø 195 mm Spindel pinole slag  200 mm Max. afstand spil - tafel  695 mm Tafel / voet afmeting lengte x breedte   1200 x 750 mm Vermogen  kW   5.5 kW Toeren - Snelheden - Stappen   2800 Rpm  

Magnetic chuck diameter: 1500 mm Grinding height: 0 mm Grinding wheel diameter: 1500 mm Spindle power: 45 kW

Table diameter: 0 mm Turning diameter: 580 mm Turning height: 450 mm Motor power: 0 HP/kW Positions ATC: 12   Positions APC: 0   CNC Brand: Fanuc CNC Model: I Series Make Doosan Type PUMA VT 450 Year 2008 FANUC i series Centre height (mm)Swing = 580 Center distance (mm)Height = 450 Spindle bore Speeds 2500 Rpm ATC 12 positions Chip conveyor High pressure coolant  

Table length: 920 mm Table width: 435 mm Longitudinal X: 762 mm Cross Y: 435 mm Vertical Z: 510 mm Positions ATC: 30   Positions APC: 0   CNC Brand: Siemens CNC Model: 828 D Make Doosan DNM 4 Type DNM 400 II Year 2014 Siemens 828 D Table length (mm) L = 920 Table width (mm)W = 435 Longitudinal X (mm) X = 762 Cross Y (mm) Y = 435 Vertical Z (mm) Z = 510 Bt40/12.000/18.5 kW ATC 30 positions 20 Bar coolant- High pressure coolant 20 Bar - LNS chip conveyor - Siemens SINUMRIK 828 D - Taster Renishaw TS 27R - Robot interface for UR 10  

Table diameter: 2000 mm Turning diameter: 2200 mm Turning height: 2150 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   Make Dorries 22 Type SDE 200 Year70 er Double support Centre height (mm)Table = 2.000 Center distance (mm)Swing = 2.200 Spindle bore Height = 2.510 Speeds 125 Rpm Digital read outConical turning device  

Machine has been used only 300 hours Machine is still under warranty Machine is like new condition X Y Z = 2500mm x 950mm x 850mm

Table diameter: 1250 mm Turning diameter: 1400 mm Turning height: 1180 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   Make Dorries SDE Type SDE 125 Year 1975 Dorrie SDE Singel column vertical borer karussel Centre height (mm) Table = 1.250 Center distance (mm)Swing = 1.400 Spindle bore Height = 1.180 250 rpm / 5 ton load 2 axis droside head  

Turning diameter: 500 mm Turning length: 450 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan S310NM Type S 310 NM Year 2007 / 3412 Hours ! Doosan s310 NM with Fanuc 21 iTB Centre height (mm) Swing = 500 Center distance (mm)DBC = 450 Spindle bore CNC Fanuc 21 iTB Live tooling ATC 12 positions Bar feeder LNS servo speed Chip conveyor + Tool eye Doosan S310 NM CNC Lathe  

Multi axis 5 axis simultaneous Capto C63 tool holder Number of magazine: 40

Doosan Puma 280M CNC Lathe C axis Machine is in good working condition

Turning diameter: 550 mm Turning length: 513 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i Tb Make Doosan PUMA Type 240 MB Year 2007 FANUC 21i TB Doosan Puma 240 MB Centre height (mm) Swing = 550 Center distance (mm) DBC = 513 Spindle bore Bore = 76 ATC 12 Position Speeds 4500 / 11 kW Live tooling 5.5 kW / 5000 Rpm Bar feeder IEMCA 65 mm Bar feeder interface Chip conveyor 7 Bar Coolant Tool eye Tool Gripper Tool managment