do all used for sale

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Roof window roller shutters, blinds, roller shutter curtains, dome light drive, smoke outlet -Drive for: dome light/smoke vent -Type: F6-D2 LK 150/150 AK30 T-PN70G -Stroke: 325 mm -Price: per piece -Number: 2 pieces -Dimensions: 1335/370/H300 mm -Weight: 25 kg/piece

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.5 kW -Speed: 1420 rpm -Max. grinding wheels: Ø 350 x 32 mm -Operating voltage: 380 volts -Dimensions: 740/600/H1175 mm -Weight: 238 kg

Safety switch, safety interlock -with: Kuhse electric drive 220 V 0.18 A. -Dimensions: 680/100/H190 mm -Weight: 7.3 kg

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

for liquid doughs such as waffle dough, for mixing liquids, Single-walled aluminium container approx. 200 L full capacity useful capacity up to 120 L, With outlet tap, with cover Drive 380V, 50Hz, approx. 1 kW, 1400 rpm Year of construction unknown, tested, newly sealed, with test run. Dimensions: 0.7 x 0.7 x 1.35 m high, approx. 80 kg

Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.

max. workpiece length: 3200/5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Safety control, protective door switch magnetic -Type: PSEN2.1p-21/PSEN2.1p-20 -Number: 1x available -Price: per piece -Weight: 0.1 kg

max. workpiece length: 3200,5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Portalbauweise zum Einsatz für Rundbogenfenster, Türen, Pfosten-Riegel, Innenausbau, Treppen Kurze Zusammenfassung: --------------------------------------------- Arbeitsbereich: X = 3200 mm (Optional 5100 mm) , Y = 1500 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspindeln Y-Richtung mit 2 doppelten Horizontalbohrspindeln X-Richtung und 1 doppelte Horizontalbohrspindel in Y-Richtung Sägeaggregat in Bohrkopf integriert 27 Werkzeugwechselplätze: Karussellwerkzeu ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4500,6000 mm profile spindle: 3 Stück main drive: 24 kW Control: Siemens 840d Working Process Logos Life Evo XS 2345 ------------------------------- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

grinding wheel diameter: 300 mm no. of working stations: 2 Stück manually feed: ja 0 max. width of grinding wheel: 50 mm grinding wheel hole diameter: 25 grinding wheel speeds: 1420 U/min voltage: 400 V / 50 Hz total power requirement: 2 kW weight of the machine ca.: 110 Kg dimensions of the machine ca.: 0,6 x 0,5 x 1,2 m • Work bench grinder with a disk diameter of 300 mm, • We are able to supply an under frame additionally, similar in execution as shown in the picture, additional price: EUR 210.00. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dosing system, dosing device, dispenser for dosing system, dosing machine -Type: 1500XL -Dimensions: 265/150/H65 mm -Own weight: 2 kg

Dosing pump, 2-component dosing pump -For dosing liquid media -Dosing rate: 1.4 l/h -Pressure: 10 bar - Electrical connection: 100-240 V 50/60 Hz -Weight: 3.6 kg

Double hydraulic pump, oil pump, gear pump -PTO shaft diameter: Ø 34 mm Quantity: 1 piece available -Dimensions: 440/180/H155 mm -Weight: 35 kg

Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit  ...

max. workpiece length: - mm profile spindle: - Stück main drive: - kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t working feed: 9 / 14 mm/sec stroke: 600 mm column daylight: 1550 mm : 600 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 3000 mm tank capacity: l feed speeds: 9 mm/sec return speed: 14 mm/sec total power requirement: 18,5 kW weight of the machine ca.: 35 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3100 mm swing diameter: 3600 mm turning height: 3600 mm control: Fagor 8035 table load: 35 t turning speeds: 0,32 - 40 U/min max. ram stroke: 3000 mm table load: 35 t turning speeds: 0,32-40 U/min total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

Door holding magnet -Type: 425/24 -Liability: 70 CP -Number: 2x available -Price: per piece -Weight: 1 kg

Total lenght 2800mm

S39 - used approx. 60 m³ / 60,000 ltr double-walled steel tank, heating oil tank, water tank, fire fighting tank, water cistern. technical details: capacity: approx. 60 m³ / 60,000 ltr material: steel tank, double-walled, DIN 6616D/6601 manufacturer: Dehoust year of construction: 2007 factory no.: 17/07512 weight: approx. 11 t dimensions: Ø approx. 2.90 m × L approx. 9.52 m × total H approx. 3.30 m Other: Used, in good condition, above-ground storage tank, steel tank on 2 steel bases attached to the tank, former heating oil tank, lid and connections on top of the tank body. The container has been emptied and professionally cleaned inside. According to age, traces of use are present. The container can be used as a storage tank for water and many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your d ...

We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!

Double bench grinder, bench grinder, column grinder, column grinder, Cut-off machine, polishing machine, polishing stand -Motor power: 0.45 kW -Speed: 2,800 rpm -Max. Grinding wheels: Ø 150 x 20 x Ø 32 mm -Operating voltage: 400 volts -Dimensions: 650/700/H1500 mm -Weight: 198 kg

Benier Dough Weigher Type: B84 1 chamber with compressed air Stainless steel cladding Speed adjustable Weight range 300-1500gram Baker's condition, as it is out of the bakery without cleaning or testing

Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm

Glimek Dough Weigher approx. 300-1200gram 1 chamber with large funnel in baker's state Sale to Export Height: 157cm Width: 160cm Depth: 62cm

- 62cm bandwidth - with digital control - Stainless steel scaffolding - can be driven on castors with locking plate

with compressed air with lift to the top Stainless steel version medium sized funnels Manufacturer: Unknown

Kemper Long Knitter - L analog control with flour spreader Spreader adjustable Speed treadmill adjustable Height of the bands adjustable with CE plug for linking to bread system No separate power connection required on rolls Metrics: Height: 170cm Width: 200cm Depth: 90cm

Dosing hoppers Manufacturer: HECKERT Type: Dosing bunker specifications: Sliding floor length: approx. 8,500 mm Sliding floor width: approx. 2,700 mm Sliding floor height: approx. 2,360 mm Side wall height: approx. 2,000 mm Capacity: approx. 40 m³ Drive power: to follow!

Door hold-open magnet, door magnet, hold-open magnets, fire door -Type: GT 50 A 002 -Voltage: 24 V 5 W. -Holding force: 750 N -Number: 15x magnets available -Price: per piece -Dimensions: Ø 50 x 30 mm -Weight: 0.35 kg

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

door magnet, door magnet, holding magnets, fire door -Type: GT 70 A 001 -Voltage: 24 V 8 W -Holding force: 2000 N -Quantity: 4x magnets available -Price: per piece -Dimensions: Ø 70 x 35 mm -Weight: 0.83 kg

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.47 kW -Speed: 3,000 rpm -with stand -Max. grinding wheels: Ø 200 x 25 x 32 mm -Operating voltage: 380 volts -Dimensions: 540/540/H1100 mm -Weight: 68 kg

Sinmag conical round knitter with flour spreader - with flour spreader - Cones and gutters with Teflon coating - with stainless steel base - with emergency switch - on swivel castors with parking brake

Very high-quality CNC – controlled under-table two-unit double miter precision circular sawing machine with schifter cutting device (heavy version - 3,500 kg dead weight) Brand new, immediately available from stock (subject to prior sale). For the precise and rational cutting of large and heavy profiles made of aluminium - non-ferrous metals - various plastics. The machine can be used both for single cutting - when cutting with two sawing units at the same time (smallest section length 450 mm / largest section length 5,000 mm) or in automatic mode – when used as single-unit circular saw machines, so that Section lengths from 5 mm to 15,000 mm and longer possible. Five CNC axes for the electronic rotation of the saw tables infinitely variable over the entire rotation range, the vertical inclination of the saw blades electronically infinitely variable bet ...