do all used for sale

Dough pre-portioner Kemper Relexer - SK -Dough pre-portioner Relexer SK -with high conveyor belt -Year of construction 2004 -32 Amp. -400 Volt 50Hz 3Ph

Specifications: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 25 mm - Grinding wheel bore approx. 51 mm - Disc speed 1450 rpm - Drive 400 V / 0.7 kW - Space requirement approx. W 600 x H 400 x D 350 mm - Weight approx. 30 kg - Console for wall mounting

The DM 302 sealing foaming system sets new standards in the automated processing of electrical housings. Equipped with the MK 450 high-precision mixing head, this system is specially optimized for processing 2-component PU foam systems on plastic and aluminum housings. A central highlight of the system is the innovative high-pressure water flushing. By converting potential energy into kinetic energy, the mixing chamber is mechanically cleaned in a highly efficient manner within a few seconds. This not only provides the user with an environmental advantage by dispensing with conventional cleaners, but also significantly increases productivity by eliminating downtime for refilling or replacing cleaning chemicals. The technical equipment of the system is designed for maximum reliability and ease of use. The system is controlled via a wear-free industrial PC with central data storage on a co ...

I sell a double end cutting and milling machine FRIULMAC IDRAMAT, built in 2007. Working width up to 2500mm Configuration left side / fix: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 + 1 pcs. groove saw units front + rear with jump Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 KW 1 pcs. special milling unit on top / 5.5 KW Material pressure band with support from above. Special design, also suitable for side dimensioning. Continuous machine. Siemens Simantic control panel. Condition Very good. Available the same.

For trouble-free operation at high throughput rates of cable recycling systems, a constant and adapted feeding of cold cable material is crucial. So that an employee does not have to constantly check or carry out the material, the use of a dosage makes sense. With a volume of approx. 1.5 m³, this offers a sufficient stock to ensure the independent operation of a plant. The conveying speed is simply regulated by a handwheel on the gearbox and the layer height on the conveyor belt can be adjusted appropriately by a slider.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS single door: 600 x 2000 RAL 7035 -Article No.: 5050154 -Dimensions: 2040/645/H90 mm -Weight: 33 kg

Control cabinet, distribution cabinet, control cabinet, TS modular cabinet, profile door -Side door -Dimensions: 1980/635/H40 mm -Weight: 26 kg

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Hori ...

Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.

Manufacturer: MKG Maschinen- und Kranbau GmbH Type: HMK340TA2 Factory No. 980-555 Year of construction: 1992 Vehicle is fully functional. Hydraulic system currently shows no leakage. Battery is in good condition. Crane vehicle can be supplied externally with high voltage current for continuous operation. Mechanically and technically in order. The wheels and castors would have to be renewed. Vehicle is now available...

Control cabinet, distribution cabinet, control cabinet TS modular cabinet, profile door -Profile door KTS for: refrigerator -TS8 1200 x 2200 -Price: per piece -Number: 2 pieces -Dimensions: 2240/680/H280 mm -Weight: 66 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Pull-down jaws: with magnet -Interior dimensions: 140/160 mm -Groove width: 8 mm -Price: per piece -Number: 2 pieces -Dimensions: 200/30/H100 mm -Weight: 3.1 kg/piece

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -1 piece: pull-down jaw -Interior dimensions: 140/160 mm -Groove width: 8 mm -Dimensions: 200/30/H100 mm -Weight: 3.2 kg

Used lifting kneader DIOSNA, Type: D 200 / 2G -In bakery condition- - 2 speed levels - for 200kg dough or 125kg flour - Engine re-mounted - New V-belts - New timer - Stainless steel boiler - Plasticized kneading spiral nickel-plated and food-grade - Condition: Good, technically tested, cleaned, immediately ready for use Boiler volume: for 200 kg dough El. Connection: 380 V, 50 Hz, 7.1 A Inspection and test run are of course possible by arrangement.

Roof window roller shutters, blinds, roller shutter curtains, dome light drive, smoke outlet -Drive for: dome light/smoke vent -Type: F6-D2 LK 150/150 AK30 T-PN70G -Stroke: 325 mm -Price: per piece -Number: 2 pieces -Dimensions: 1335/370/H300 mm -Weight: 25 kg/piece

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

offer 22556 Specifications: - Saw blade diameter 420 mm - Saw blade bore 30 mm - cutting length 3000 mm - smallest cutting length at 90° + 45° 335 mm - Intersection area see diagram attached - Swivel range inwards manually 90 - 22.5 ° - Tilt range inwards manually 90 - 45 ° - Saw blade speed 2800 rpm - Drive 380 V / 2 x 4000 Watt - Compressed air connection 7 bar - Air consumption per working stroke approx. 64 l - Space requirement approx. W 4500 x H 1950 x D 1600 mm - Weight approx. 1400 kg - with: - Cutting length adjustment with positioning control - Positioning control renewed approx. 2002 by WOLFF - Saw unit swivel and tilt for high and wide profiles, - as well as cut-outs

Double tool holder, double tool holder, double tool holder for turning tools -Size: 120 x 120 mm -Schuck holder: 33 x 49 mm -Bore: Ø 25 mm -Resses: Ø 80 mm -Weight: 5.9 kg

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Double grinding machine: Type ES200 PW -Grinding discs: max. Ø 230 mm -Motor: Power 0.55 kW -Speed: 2800 rpm -Voltage: 380 V -Dimensions: 510/320/H1230 mm -Weight: 54 kg

REF-2390 CIM AUTOMATIC DOUGH SHEETER Manufacturer: CIM BAKERY EQUIPMENT S.r.l. Type: ROLLMAX TS 700 Year: 2000 Power: 1kW Voltage: 400V / 50Hz 2 belt conveyors. Dimensions: 660mm width, 1,500mm length (each belt) Overall dimensions: 1,300mm width, 3,650mm length, 1,350mm height

Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg

Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 32 mm -Speed: 3000 rpm -Engine power: 0.9 kW -Operating voltage: 380 volts -Dimensions: 1100/540/H1140 mm -Weight: 125 kg

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

We sell here a portioner / screw conveyor from the manufacturer Meyn in a good used and functional condition. Runs on 400 volts, year of construction 2001, completely stainless steel, speed adjustable, rollable, for loading and portioning, 100 liter funnel, workshop tested, ready for immediate use, dimensions W/D/H 150/110/230 cm, others on request.

SPECIFICATIONS: Automatic drilling and dowel insertion machine with horizontal loading and unloading system, consisting of: Loader: ESSEDUE CNC transverse drilling machine: Biesse FTT Year of construction 2003 4 upper drill heads with automatic change of vertical drills 2 X-axes 4 Y-axes 4 electrospindles with automatic tool change A total of 12 slots for tool changes Inline transverse plate turner for double-sided drilling CNC transverse drilling machine: Biesse FTT Year of construction 2004 2 upper drill heads with automatic change of vertical drills 1 X-axis 2 Y-axes Biesse FHT Transversal Drilling and Dowel Insertion Machine Year of construction 2004 High pressure bonding system: Csnpgoz93 5 + 5 injectors Large vibrating baskets with dowels ESSEDUE unloader with additional transverse outlet for individual panels

Complet chrome steel 3-roller extruder Speed control Coarse feed rollers Maximum width:: 600 мм Stencil interchangeable Width/depth: 650 мм х 1'000 мм, height: 1'550 мм very good condition

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.5 kW -Speed: 1420 rpm -Max. grinding wheels: Ø 350 x 32 mm -Operating voltage: 380 volts -Dimensions: 740/600/H1175 mm -Weight: 238 kg

Dough dividing and warp knitting machine WP Rotamat CN 30 pieces -30 pieces -for dividing and rounding doughs -Weight range per dough piece from 30grams to 70grams -Dough insert up to a maximum of 2100gr. -with plastic knife -Dimensions 62x53x140 WxDxH -including 3 knitting plates

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

Double disc grinding machine

Stock No. 2590k 1 used compounding pelletizing line, throughput up to 1200 kg/h depending on material, consisting of: 1x Grav. Dosing system 5-component SITECOM incl. control 1x Extruder twin screw THEYSOHN type TSK 90 Screws 2x Ø 90 mm – 36 LD synchronization Segment screw and barrel, water / medium cooled Screw speed up to 300 rpm-1 Extruder drive 255 kW-DC 1x side dosing extruder TSD 75 twin screw with drive 3 kW 3x degassing openings 1x melt filter No. 1 type K –HS- Y with sieve 176 mm, incl hydraulic 1x melt pump with drive 22 kW 1x meelt filter No.2 type K-SWE 180 RS back-flush self-cleaning incl. hydraulic 1x strand head with 32 x Ø3.5 mm holes 1x strand cooling pool 620 x 5000 mm 1x string granulator SG 300, drive 11 kW Screen control ResoTec / control cabinet Visit / demonstration at short notice by arrangement. Further compounding lines and access ...

Safety switch, safety interlock -with: Kuhse electric drive 220 V 0.18 A. -Dimensions: 680/100/H190 mm -Weight: 7.3 kg

Machine name: Dry goods doser Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year of construction: Unknown Speed: Mixer Speed: 5.6rpm Content: 75 litres Drive motor: 0.25 kW. - Mixer drive 0.25 kW Dimensions: length 800 mm x width 700mm x height 1200mm Empty weight: 100 kg Tech. Documentation: No Remark: mixed drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.1 kW -Grinding discs: 300 x 40 -Operating voltage: 380 volts

Thank you for your interest in our used machines, which we can offer you as follows: Model: Double Z kneader with hand tilt Trog dimensions: 350x365x280mm (lxwxh) Net capacity: approx. 35 l total Electrical: 400V 3 ph Dimensions: 1200x800x1650mm (l/w/h) Weight: approx. 350 kg Details: Hand tilting, parts made of stainless steel in contact with the product We offer this machine for sale "as is" to the exclusion of any warranty/claims for defects or representations. ex stock Hess. Lichtenau; Unpacked

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder, tool grinding machine -Motor power: 1.1 kW -Speed: 1410 rpm -Grinding discs: Ø 300 mm -Operating voltage: 380 volts -Dimensions: 1080/480/H1240 mm -Weight: 252 kg

Dough dividing machine Fortuna Automat A3-30 - 30 Division - with 3 ratchets - with active circuit switch - electric head - Weight range dough pieces 32-80 grams - Dough insert per ratchet 960-2400 grams - Weight of the machine approx. 540 kg

Safety control, protective door switch magnetic -Type: PSEN2.1p-21/PSEN2.1p-20 -Number: 1x available -Price: per piece -Weight: 0.1 kg

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Key data: 50

Extruder 2 corrotating spindles: 50 mm Ø, 40 L/D, brand: ICMA SAN Giorgio, with double degasser. Motor: 57.5 Kw direct current with drive. Material dispenser and thread head (spaghetti), with electrical panel.

Gebrauchte Fritteuse für 60 Donuts. Manuell. Für weitere Informationen kontaktieren Sie mich bitte

Key data: 50

Extruder 2 spindles: 50 mm Ø 12 L/D, motor: 4.5 kw, without electrical panel.

Dosing system, dosing device, dispenser for dosing system, dosing machine -Type: 1500XL -Dimensions: 265/150/H65 mm -Own weight: 2 kg

Gravimetric dispenser Brand: Maguire. For 4 different materials plus master dispenser. No electrical panel.

Extruder 2 spindles 18L/D, model: BK-50-93, tapered spindles, brand: Volcano, with motor: 25hp, with variable speed drive. Degasser and dispenser of material and electrical panel.