do all used for sale

Diesel forklift Machine Brand: DOOSAN Designation: D90S-5 Year of production: 2012 Counter Reading (mtg): 7970 Empty weight (Kg): 12197 Lifting capacity (kg): 9000 Height. lift. (mm): 3100 Lateral fork travel Mast type: STD UDT review until March 2022 Fuel type: diesel After a large technical inspection for over PLN 30,000 (we have invoices for everything) - new tires - new fore fore fore - regeneration of actuators, - gearbox: discs + sealants - brakes: discs and bearings - all oils, liquids and filters Technical condition: used, very good

Complete production lines Dornow various potato peeling machine Very interesting for potato farmers who could market their products directly to bulk buyers. Machine We sell a complete production line. It is a potato or tuber peeling unit consisting of: Conveyor belt Stone catchers, Roller peeling machine with an hourly capacity of 2t. 10m < for sale. However, these are not included in the price. It is a private sale, so no VAT. can be shown. More photos on request

Complete production lines of Dornow various potato peeling machine Very interesting for e.g. potato producers or potato processing companies from the food industry, who could market their products directly to large customers. Machine We only sell the entire production line. It is a potato or tuber peeling unit consisting of: Conveyor belt Stone catchers, Roller peeling machine with an hourly output of 2t. 10m < for sale. However, these are not included in the price. It is a private sale, so no VAT. can be shown. More photos on request

We offer a position Doka Framax Alu 186,759m² in good ready-to-use condition with up to 75% discount! Partially new formwork - new value = 176.805,40€ Special net price 53.512,74€ Formwork completely cleaned, inspected and sorted. Formlining exposed concrete class 2/3 or newly covered with Finply formwork. Out-of-the-box, suitable for higher-value use. Pcs. Designation 28 Alu-Framax Xlife-Element HK 0.90x 2.70m 3 Alu-Framax Xlife-Element HK 0.90x 2.70m – newly occupied 3 aluminium Framax Xlife element HK 0.75x 2.70m 1 aluminium Framax Xlife element HK 0.75x 2.70m – newly occupied 15 Alu-Framax Xlife-Element HK 0.60x 2.70m 5 Alu-Framax Xlife-Element HK 0.60x 2.70m – newly occupied 10 aluminium Framax Xlife element 0.45x 0.90m 3 Alu-Framax Xlife element 0.45x 0.90m – newly occupied 3 aluminium Framax Xlife element 0.30x 2.70m 7 Alu-Framax Xlife el ...

We offer Doka Multi-Purpose Bar Top 50 with 80% discount New value = €14,035.50 Package price: 2800,00€ net. Out-of-the-box Pcs. Designation 7 multi-purpose bars WS10 Top50 0,50m 18 Multi-purpose bars WU12 Top50 2,50m 1 multi-purpose bar WS12 Top50 2,75m 1 multi-purpose bar WU12 Top50 3,00m 8 multi-purpose bars WU12 Top50 3,50m If you have any questions, please contact Mr. Becker on 0049 176 70044689 Offer only valid while stocks last! Subject to prior sale! Loading: free of charge from our warehouse Transportation: Can be arranged on request. The transport price depends on the required loading meters, weight and distance and is calculated individually. Payment: cash payment on pick-up, transfer before pick-up. All prices excl. VAT + transport. Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration a ...

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

Complete production lines Dornow div. Potato peeling machine Very interesting for e.g. chip manufacturers, French fries manufacturers, potato farmers who could market their products directly to bulk buyers. Machine We sell a complete production line. This is a potato or tuber peeling unit consisting of: Conveyor belt Stone catchers, Roll peeling machine with an hourly output of 2t. 10m < for sale. However, these are not included in the price. This is a private sale, so no VAT. can be expelled. More photos on request

we offer here 3 water bunkers with different capacities. the water bunkers are all equipped with bucket conveyor belts and are made of stainless steel25

Buffet counter table for self service. For all types of restaurants, hotels, wok etc. Manufactured by DOSINOX. It is conditioned for refrigeration and without refrigeration. The distribution is as follows: mostly refrigerated and a small part without. External measurements 8000 mm x 1500 mm x 900 mm high. Three-phase connection. Decorated in black marble stone and red, with glass and upper led lights.

ADAST DOMINANT 846 P -Year 2001 -Impressions: 42 mil. ( battery changed and started now from zero ) -Perfecting 2+2 or straight 4+0 -Size max: 520x740 mms. -Max speed 12.000 sh/hour -Max paper thickness 0,5 mms. -Alcohol dampening with Technotrans refrigeration -High pile delivery -Table control for all registers -Easy plate change system -Powder sprayer, in production

Description: • Serial number 2046 • Standard tires 29.5 R25 • Bucket width 3480 mm • Standards bucket capacity 4.80 m³ • Steering type AL • Maximum Speed ​​35 km/h • Maximum pouring height 3100 mm • Lifting power 264 kN • CUMMINS QSM11 engine: displacement 10800 cc, power 250 KW • Working hours according to meter 16500  ,  ,IMPORTANT: , , The customer is responsible for all the loading related to the equipment. , Dimensions and weights are approximate. , , Approx. Onsite Dimension. (l x w x h): 9,320 x 3,210 x 3,800 mm, weight approx.: 29,800 kg

Complete production lines of Dornow various potato peeling machine Very interesting for e.g. potato producers or potato processing companies from the food industry, who could market their products directly to large customers. Machine We only sell the entire production line. It is a potato or tuber peeling unit consisting of: Conveyor belt Stone catchers, Roller peeling machine with an hourly output of 2t. 10m < for sale. However, these are not included in the price. It is a private sale, so no VAT. can be shown. More photos on request

DOOSAN LYNX 220 LMSC CNC turning center was manufactured in 2015 in South Korea. This extremely efficient and reliable machine is able to streamline even the most demanding machining process in any production facility, thanks to the use of, among others, two high-speed spindles and an extremely stable design. Workpieces with a maximum diameter of 240 mm and a length of 510 mm are machined inside a large working area equipped with a specially designed bed. The bed effectively dampens all vibrations and oscillations, resulting in a better quality of the machined surface and increased service life of the cutting tools. To this date, the DOOSAN LYNX 220 dual-spindle CNC lathe has worked a total of 2198 hours and has been used exclusively for machining stainless steel. The total weight of the machine is 3400 kg. Technical data of the DOOSAN LYNX 220 LMSC CNC lathe General data - feeds in ...

Seize the opportunity to own a nearly new Domino D620i CO2 Laser at a significant discount. Originally acquired for a project that was discontinued, this laser has only been run once and is in excellent condition. Ideal for businesses looking to enhance their production capabilities with minimal investment. Condition: Like new – ran only once for testing in a project that was not continued. Inclunding: Domino DPX1000 suction system, 230V, 6m suction hose, all substrates except PVC, incl. user manual electronic Touch Panel 10.4" for D-, F-series, requires X59 communication cable (old TP2) Rotary encoder IP66 for Ax, D, F and U series, with coupling, 10mm shaft, 10m connection cable, cable plug and mounting bracket Maintenance unit for IP65 laser, with air filter, control valve, solenoid switch, 5m cable, 12m compressed air hose, inlet 10mm (customer side), outlet 12mm (to lase ...

This 4-Axis DOOSAN HM 800, a 2008 horizontal machining centre, offers high performance with the CNC FANUC 18i–MB control system. It has extensive strokes: 1250 mm on the X-axis and 1000 mm on the Y and Z axes, with rapid movements of 24 m/min on all axes. The dual pallet system, each 800 x 800 mm, has a 1600 kg load capacity. Its spindle reaches 6000 rpm with a 22/26 kW motor output. A 90-position tool chain and high-pressure coolant system ensure optimal cutting. Contact us for more details.

UNIROLL from DORST Type: SRHV 1 Year of manufacture: 1990 Generally overhould in: 2017 Machine is in very good condition! Including Vacuumpump!

Laboratory press with 11 vertically aligned plates (260 mm x 250 mm each), with hydraulics pump and drive 0,5 kW, oil reservoir, outlet tray and drain cock. Fabrics need to be replaced.

Laboratory press with 11 vertically arranged casting plates (each 260 mm x 250 mm), with hydraulic pump and motor 0.5 kW, oil reservoir, drain tray and drain valve. Tower can be moved forward; Cloths should be renewed.

CARTRIDGES FILTER MANUFACTURER: DONALDSON TORIT manufacturer: Original Donaldson Torit filter material: Extremist web original type: 262-5026 (Open available: 20 pieces of price: each 90.-? 262-5002 (lids) Available: 3 pieces of price: each 90.-? 262-5015 (Open available: 5 pieces of price: each 70.-? suitable for ray arrangements Ray cabin Lackieranlage plasma Absaugung etc.

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Vibratory sieves with interchangeable screen coverings, screen surface: 450 mm x 300 mm, vibrator: 0.3 kW / 2,750 RPM, cast housing with oval opening. Last used as slicker sieving (wet sieving). Several identical siesies available

Vibration sieves with exchangeable screen lining, screening surface: 450 mm x 300 mm, vibrator: 0,3 kW / 2.750 RPM, cast case with oval inlet. Prior use: Ceramic slurry screen (wet screening process). Several identical sieves available.

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

Search Dornier Delta or Dornier Delta II Lithotripter / lithotripsy

Brine injector WANTED PSM 12-24-4.0

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Doka Framax column stage NEW with 50% discount on the new price! Top condition! 1 x Doka support platform 150/90cm - 1633,50€ 1 x System Ladder XS 4.40m - 123.50€ 1 x Back guard exit XS - 135,50€ 1 x Connection XS Framax/Alu-Framax - 77,50€ 1 x Connection XS Support Platform - 43,05€ Prices are excl. VAT and transport Sale reserved If you have any questions, please contact Mr. Becker on 0176-70044689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm. mobile: 0049 176 70044689 Mr. Becker Office/warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Register court Ulm: HRA722943 UST-ID-NR: DE279047055

Manufacturer: DOMINO Type: DGM-1 Year construction: 2001 ; ready for use

Fine-sighting system for final finenesses of up to 3 microns, consisting of: product task, Acucut Safe C-24, dust filter Bühler PGFG 60/18 (39 m2 filter area, pressure shock-resistant, without fan), various dust lines and control cabinet. Previous use: toner production (power: 200 - 600 kg/h). Appendix revised in 1993, regularly maintained.

Ultra fine classifying line for end finenesses up to 3 micron, consisting of: Feeding unit, Acucut Mikro air classifier C-24, dust filter Bühler PGFG 60/18 (39 m² filtering surface, shock pressure proof, without blower), several tubes and switchgear cabinet. Prior use: Toner production (capacity: 200 - 600 kg/h). Line revised in 1993, regularly maintained.

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Air nozzle 110 mm with flexible hose 80 mm, total length approx. 890 mm, shaft-mounted holder for 20 mm pipe

Preliminary information: stock no. 4657: 1 used Rapid radial drilling machine Make DONAU, mod. DR 28 Z with drilling head adjustment 600 mm work range: table 1200 x 500 mm

Model L126TI No. of Cyl. L6 Aspiration TI Displacement (Liter) 11.1 Bore x Stroke (mm) 123x155 Output (ISO 3046, 8528 kW(ps)/rpm) 265(360) / 2000 - Dimension (L×W×H) 1235x855x1073 Dry Weight (kg) 1,060 Emission TIER-2

Specifications Classification L136 Cylinder L6 Aspiration NA Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 118(160) @ 2200 kW(ps)/rpm Medium Duty - kW(ps)/rpm Light Duty - Dimension (L×W×H) (mm) 1266 x 875 x 937 Dry Weight (kg) 743 Emissions Tier 1 Power Range (kW) 118 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Classification L136TI Cylinder L6 Aspiration TI Displacement (Liter) 8.1 Bore x Stroke (mm) 111 x 139 kW(ps)/rpm Heavy Duty 169(230) @ 2200 Dimension (L×W×H) (mm) 1364 x 911 x 937 Dry Weight (kg) 773 Emissions Tier 2 Power Range (kW) 169 Speed Range (rpm) 2200 The value is based on Output (ISO 3046, 8528).

Used marine engine Dorman SK 6 27/55

Qty. 1 Second-hand pulp moulding plant Maker: DongJin MP Tech Model no.: DPF 70-85 S2 Built: 2007 Dry type pulp moulding machine Quantity: 4 units Condition: can be inspected in dry running Three step way: heating /pressing/vacuum dry -Platen size: 700 x 850 mm -Dimensions: 1300(W) x 3200 (L) x 4000(H) mm

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...

X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012

MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM

DOMA-T Cheese Divider KT 2 BOX Knife for 20 parts Machine for loaves with a diameter of up to 40cm Loaves are pushed upwards through the knife and pieces can then be easily taken away from the machine surface Two-hand operation, change direction by letting go and pressing both buttons again Machine must be thoroughly cleaned before use Table-table with approx. 60x70x45H Messer has been reworked before, but does not affect the function. Video about test run and other pictures available

Control: FANUC 18 M Technical data Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Table divisions (B): 1 ° Pallets: Length: 450 mm Width: 450 mm Time of changing palets: 12.5 sec Transport weight: 300 kg Tool changer: Number of tools: 40 Tool diameter: 100 mm Tool lenght: 300 mm Max. tool-weight: 6 kg Time of tool changing: 1.6 / 4 sec Spindle nose:: MAS BT 40 Horizontal spindle speeds: number (steps): 2 stepless from: 120-3000 rpm up to: 3000-12000 rpm Feed range: 1 - 15000 mm/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Spindle motor: AC 22/18.5 kW Feed motor: 3.8 kW Total power required: 45 kVA Machine´s weight about: 9000 kg Overall dimensions machine: Length: 3048 mm Width: 4051 mm Height: 3180 mm Various accessories: Internal coolant supply (cts): 20 bars  ...

Key data: 1030 Fanuc, 1650 21 i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T 3 Chuck Kitagawa 630 mm Chip conveyor Tool eye Tool holders in Revolver Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Key data: 1030 Fanuc, 1650 18i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-T Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

Key data: 850 Fanuc, 1350 Oi, 12

Turning diameter: 850 mm Turning length: 1350 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi Max. turning Ø: 850mm X-Axis:         293mm Y-Axis:         130mm Z-Axis:         1.350mm Spindle bore:   102mm Speedrange:     2800Rpm Spindle power:  30kW ATC / revolver: 12 Speed live tools:5000Rpm Power live tools:7,5 kW Chip conveyor:  Yes  Stroke pinole:  5mm Quill Ø:        100mm Length:         4.500 mm  Width:          2.105 mm  Height:         2.300 mm  Weight:         7.500 kg 

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

Key data: 390 Fanuc, 800 18i-TB, 12

Turning diameter: 390 mm Turning length: 800 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18i-TB Gantry loaded Bar feeder Double chuck 250 mm Axis X1 / X2 / Z1 / Z2 / C1 / C2 / Y / B Axis Max. turning Ø:  390mm X-Axis:          255mm Y-Axis:          120(+60/-60) mm Z-Axis:          800mm B Axis:          800° Spindle bore:    76mm Speedrange:      3500Rpm Spindle power:   26kW Subspindle speeds:4000Rpm Subspindle power:26kW ATC / revolver:  12 Speed live tools:4000Rpm Chip conveyor:   Yes  Tool eye:        Yes  Length:          4.000 mm  Width:           3.200 mm  Height:          ...

Turning diameter: 570 mm Turning length: 1330 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 18-T Max. turning Ø: 570mm X-Axis:         282mm Z-Axis:         1.330mm Spindle bore:   77mm Speedrange:     3500Rpm Spindle power:  15kW ATC / revolver: 12 Speed live tools:4000Rpm Chip conveyor:  Yes  Tool eye:       Yes  Pinole taper:   5Mk Stroke pinole:  100mm Quill Ø:        100mm Length:         4.000 mm  Width:          2.000 mm  Height:         2.100 mm  Weight:         6.700 kg