do all used for sale

Key data: 280 mm

Specifications: Maximum diameter 280 mm Maximum dimensions rectangle 300×280 mm Maximum dimensions bundle 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of use, these machines are already equipped as standard with a 2-metre roller table, a chip conveyor, a variable clamping force control, a double-retractable index chuck, a work light and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm messages Infinitely adjustable belt speed, controlled by an inverter Impeller motion detector with saw blade blocking and band break switch Shuttle automatic feed and sliding work table with castors Hydraulic Belt Tension Two-stage lifting clamping devices Split front screw clamp Double-retractable index screw clamp Working height se ...

Key data: 670 mm

Cutting range 90° 670 x 670 Specifications Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: infinitely variable: 15–120 m/min Cutting speed: infinitely adjustable: 5–1200 mm/min Belt drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Index speed: 200 mm/s Minimum saw diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg

Planetary Gearbox PCEF53.5-X1 New For Doppstadt DW2560B, DW3060 standard, mobile & stationary Not suitable for Biopower models (42 teeth on the roller)! Fully assembled with output flange and driver

Doka Box 1.20x0.80m Storage and transport box Doka box 1.20 x 0.80m Storage and transport Box

Extrusion line for drip irrigation

Accessories: Loading bucket KSW 3.5 m³, 2,600 mm Loading bucket KSW 2.1 m³, 2,600 mm Quick coupler KSW L70

Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg

turning diameter: 830 mm swing diameter: 920 mm turning height: 750 mm control: Fanuc 0i-TF travel -x axis: 495 mm travel -z axis: 780 mm turning speed range - spindle: 1940 U/min drive capacity - spindle motor: 37 / 30 kW chucking diameter: 380 mm turret (x-stations): 12 pos rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 20 m/min feed: mm/min spindle diameter in front bearing: 160 mm c-axis: 360° (in 0,001°) workpiece weight: 870 kg total power requirement: 61,78 kVA weight of the machine ca.: 9,5 t dimensions of the machine ca.: 2,1 x 2,7 x 3,6 m - Control unit FANUC 0i-TF - Tool Turret 12-fold - Coolant system - Foot switch - Automatic safety switch Front door & full enclosure - Work area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Doka Folding console K Console for producing a folding platform 52.40 kg Price: EUR 186,25 per piece

Neuweriger Doppelkopf make W. Müller. With WDS and filter

General SKU204U026 MakeWerner &: Pfleiderer TypeZSK 58 F96E Mach.No.231616 Year of construction1995 Sizes Screw diameter57.8 mm Main Features Motor74 KW Inlet diameter100 mm L/D27 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter57.80 L/D27 Co-rotatingcheck Ventedcheck Water coolingcheck AC-motorcheck Screw speed191 rpm MaterialNitriding steel 1.8519 General LocationBarneveld With switchgear(as is) Floorspace2.5x1.4 m Total height1,5 m Extra Specificationsthe currently installed head” on the extruder is a cleaning head. this is not a die.- there are 2 screw shafts present.- no screw segments present.- this extruder comes with brush screws.- the extruder comes with 4 extra housing segments.this extruder was part of a complete system.any associated machines are:Collin Calander Pharma 200x400 , sku: 204U929Sollich KK240 - Belt ...

General SKU359W975 MakeLeistritz TypeZSE 27HP-PH-40D Mach.No.3899 Year of construction2010 Sizes Screw diameter27 mm Main Features Motor15 KW L/D40 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter27 L/D40 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water cooling9x DC-motor15 kW, 400 volt, 1750 rpm AC-motorcheck With variable speed drivecheck Screw speed30-500 rpm Feeding with metering screwK-tron Exchangeable segmentscheck Number of temperature controllers:1 Used oncarrier material Capacitymax 200 kg/h MaterialStainless steel, Stainless steel 2.4819 (Hastelloy C-276) General LocationBarneveld With switchgearcheck Floorspace3,65 x 1,15 m Total height1,80 m Weight1200 kg CEcheck Extra information Extra Specifications- This extruder has been used for testing carrier material. No API was produced/ ...

General SKU354T968 LocationBarneveld MakeWerner &: PFleiderer Sizes Screw diameter37 mm Main Features Motor7.6 KW L/D27 Specified Features - Double screw extruder Double screw extrudercheck Number of hours284222 Screw diameter37 mm L/D27 Co-rotatingcheck Number of heating zones:5: 1 cooling: 4 heating Steam heatingcheck DC-motor7,6 kW 440 Volt With variable speed drivecheck Screw speed0-400 rpm Exchangeable segmentscheck Number of temperature controllers:5 MaterialMild steel General TypeContinua 37/27 D Mach.No.220331 Year of construction1985 With switchgear(as is) Floorspace3,2x1,3 m Total height2,3 m Weight1700 kg Extra Specificationswith extra screwsPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries >  ...

General SKU231U195 LocationBarneveld CEcheck MakeWerner &: Pfleiderer Sizes Screw diameter40 mm Main Features Motor181 KW Inlet diameter165 mm L/D54 Specified Features - Double screw extruder Double screw extrudercheck Number of hours34432 Screw diameter50 mm L/D54 Co-rotatingcheck Number of heating zones:10 Electric heatingcheck Water coolingcheck DC-motor0,79-181 kW 470 Volt Screw speed4-920-1056 rpm Feeding with hopper(165x130 mm) Feeding with metering screw(Werner&:Pfileiderer, type: ZS-B 58, motor: 5-6 kW, 400 Volt, max. 400 rpm) Exchangeable segmentscheck Number of temperature controllers:10 Capacity200-400 kg/h MaterialFerritic stainless steel 1.4113, Mild steel, Nitriding Steel 1.8550 General TypeZSK 50 MCC Mach.No.64012350 Year of construction2000 With switchgear(as is) Floorspace2,1x0,2 m Total height0,73 m Weight± 7340 kg Extra Specificati ...

General SKU442W1463 LocationBarneveld CEcheck MakeDutch TecSource Main Features Motor0.55 KW Length2000 mm Inlet diameter230 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter300 mm Length2000 mm Shaft diameter100 mm Pitch130 mm With hoppercheck Inlet230x70 mm Outlet160x155 mm Motor0.55 kW, 230/400 volt Screw speed59 rpm Outlet height1180 mm With coverscheck MaterialStainless steel 1.4552 General Typedoseer/mengschroef Mach.No.20030328 Year of construction2004 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace2,5x1,0 m Total height1,8 m Weight430 kg Extra information This screw conveyor is equiped of spray nozzles along the length of the screw. on the product input side is an opening to let sprayed liquid flow out again. Powdered foodsTea, herbs & coffeeStarchRubberAgrochemic ...

General SKU204U1443 MakeLewa TypeEK 3 Mach.No.429602-010.001 Year of construction2001 Pressure Working pressure80 Bar Main Features MaterialStainless steel Volume14 Ltr. Motor0.66 KW Specified Features - Dosing pump Pumpcheck Number of pumps:3 Capacity14l/h With motor0.66kW 230/400 Volt Dosing pumps MaterialStainless steel 1.4435(316L) General LocationBarneveld Mounted on wheelscheck Floorspace2,0 x 1,0 m Total height1,70 m Weight800 kg CEcheck Extra Specifications- 3 pump heads- mass flow meter and flow meter- electrically traced- hot water heating- used for fat dosingOintmentsBiotechnologyAgrochemicalsFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesBeveragesDyes & pigmentsAPIDosing pumpsOils & fatLewaIndustries > Pharmaceutical > OintmentsIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Fee ...

General SKU368W1091 LocationBarneveld MakeWerner &: Pfleiderer Sizes Screw diameter30 mm Main Features Motor10.4 KW Inlet diameter60 mm L/D33 Specified Features - Double screw extruder Double screw extrudercheck Number of hours8013 Screw diameter30 L/D33,3 Co-rotatingcheck Number of heating zones:8 Electric heatingcheck AC-motor10,4 kW, 440 volt With variable speed drive200-2200 rpm Screw speed4,4:1 Feeding with hoppercheck MaterialMild steel General TypeZSK 30 W 9/2 Mach.No.219522 Year of construction1985 With switchgearcheck Floorspace2,80x0,85 m Total height1,30 m Weight1100 kg Extra Specificationshomogenizing extruderwith spareparts.Powdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWerner & PfleidererIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plast ...

General SKU316S537 LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Metering screw Metering screwcheck Screw diameter85 Pitch85 Shaft diameter21 Screw length600mm With hoppercheck InletDia: 250mm(2x), Dia: 100mm, 150x150mm OutletDia 145 and 100mm (3x) With motor0,55kW, 400Volt, 1400rpm Screw speed10,5-104 rpm Metering screws MaterialStainless steel 1.4571 (316Ti) General MakeGericke Typeingredënten dosering Year of construction2010 Mounted on framecheck Floorspace2,3x2,1m Total height3,1m Weight1000kg Extra information fitted with Gericke DBW-300 metering belt specifications: length: 1800mm width: 300mm this dosing unit includes 3 dosing screws: #1 Screw Dia: 85mm pitch: 85mm Length:600 with ribbon mixer:± 165mmx75, Length :250mm #2 screw Dia: 40mm pitch: 30mm length:600mm with ribbon m ...

General SKU397W1236 LocationBarneveld MakeWeber Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h General TypeCE-03 Mach.No.CE 3061 Year of construction1985 With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Floorspace1,70x0,90 m Total height1,50 m Weight700 kgPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWeberIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndus ...

General SKU392U1285 LocationBarneveld CEcheck MakeK-tron / Burgener Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw Metering screwcheck Screw diameter± 25 mm (2x) Pitch± 10 mm Screw length300 mm With hoppercheck Hopper sizesdia. 200x220 mm Inletdia. 200 mm OutletDN40 With motor0,75 kW Screw speedmax. ± 460 rpm: With breaking/mixing shaft(max. ± 21 rpm) Motor0,75 kW Metering screws MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 General TypeK-PH-MV-KT20 / AFS002 No.1102400/M-984900 Year of construction2011 Mounted on framecheck Mounted on legscheck Mounted on wheelscheck With switchgear(as is) Floorspace1,4x0,8 m Total height2,4 m ATEX designedcheck Extra SpecificationsThe filling plant allows for the semi-automatic filling of biologically highly active, hygroscopic, and solids ...

General SKU340U844 LocationBarneveld CEcheck MakeBerstorff / Brabender Sizes Screw diameter25 mm Main Features Motor6.5 KW Inlet diameter40 mm L/D32 Specified Features - Double screw extruder Double screw extrudercheck Number of hoursunknown Screw diameter25mm L/D32 Co-rotatingcheck Ventedcheck Number of heating zones:7 Electric heating±15kW Water coolingweinreich- industriekühlung, 12kW, 1994 DC-motor6,5kW Screw speed240rpm Feeding with hoppercheck Exchangeable segmentscheck Number of temperature controllers:8 Capacity40kg/h Materialstainless steel 1.4122, Stainless cast steel 1.4027 General Typedoppelschneckenextruder DSE 25 Year of construction1994 With switchgear(as is) Floorspace2,6x0,9m Total height1,5m Weight890kg Extra SpecificationsMaximum torque of extruder screw per piece: 90 Nm. Maximum temperature: 400°C. Maximum melt pressure: 300 bar. ...

General SKU054H224 MakeAZO GmbH &: Co. Osterburken TypeDositainer mit DFR-140 No.434223 Year of construction2006 Mounted on framecheck Main Features MaterialStainless steel Volume350 Ltr. Specified Features - Silo Silowith discharge screw (1x) Closedcheck Capacity350 Ltr Diameter800mm Cylindrical height400mm Conical bottom550mm Top connectionsdia. 395mm + 2x dia. 230mm Outletdia. 190mm MaterialStainless steel General LocationBarneveld Floorspace1,3x0,9 M Total height1,4 M Weight180 KGPowdered foodsOintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPaints & coatingsAZOIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed > Starch ...

General SKUR0452 MakeAZO GmbH &: Co KG (D) TypeD128/D350xD500 No.1244149-01 Year of construction2015 LocationBarneveld Main Features MaterialStainless steel Specified Features - Powder filler MaterialStainless steel General Floorspace1,0x0,8 M Total height0,6 M Weight100 Kg Extra information This docking device creates a connection with low dust levels between two system components Powdered foodsGeneric medicinesTea, herbs & coffeeStarchSpicesCatalysts & fillersFood additivesSugarSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPowder fillersMinerals & inorganicAZOIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Food additivesIndustries > Food & Feed > ...

General SKUR0082 MakeBran + Luebbe Norderstedt (D) TypeE-P 36 Mach.No.9136896 Year of construction2000 Main Features MaterialStainless steel Motor1.5 KW Specified Features - Dosing pump Number of pumps:6 With motor1,5 kW 230 Volt With frequency invertercheck Dosing pumps MaterialStainless steel General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,2x0,9 M Total height1,5 M Weight350 KgOintmentsBiotechnologyAgrochemicalsFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesBeveragesDyes & pigmentsAPIDosing pumpsOils & fatBran + LuebbeIndustries > Pharmaceutical > OintmentsIndustries > Chemical > BiotechnologyIndustries > Chemical > AgrochemicalsIndustries > Food & Feed > Feed additivesIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > C ...

General SKUR1413 LocationBarneveld CEcheck MakeFrewitt Main Features MaterialStainless steel Motor0.37 KW Inlet diameter300 mm Specified Features - Metering screw With hoppercheck Capacity195 Ltr. Hopper sizesdia. 600x1200 mm Inletdia. 300 mm Outletdia. 150 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Metering screws MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General TypeProFi-Dos, ProFi-Sword No.5921810812 Year of construction2007 Floorspace0,9x1 m Total height2,1 m Weight250 kg Extra information Surface quality: Ra≤0.8 μm The ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation.  Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed ad ...

General SKU315T1101 MakeAzo LocationBarneveld CEcheck TypeDFS 100x1380 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport MaterialStainless steel General No.825989, Year of construction2005 Floorspace2,7x1,4 m Total height2,3 m ATEX designedcheck Extra information IBC lock, type EB12: with: screw conveyor, type DFS 100x1380 NE300, size: dia. 100 mm, lenght 1380 mm, Vibration motor,Stainless steel vessel, type D1104XD305 on frame, volume 600 LtrPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesMiscellaneous transportPlastic & polymersCatalysts & fillersDetergent & surf.SugarOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicAZOIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustri ...

General SKUR1412 LocationBarneveld CEcheck MakeFrewitt Main Features MaterialStainless steel Motor0.37 KW Inlet diameter260 mm Specified Features - Metering screw With hoppercheck Capacity120 Ltr. Hopper sizesdia. 600x800 mm Inletdia. 260 mm Outletdia. 300 mm With breaking/mixing shaft16 rpm Motor0,37 kW 230 Volt Metering screws MaterialStainless steel 1.4404, Stainless steel 1.4435 (316L) General TypeProFi-Dos, ProFi-Sword No.5921810811 Year of construction2007 Floorspace0,9x1 m Weight250 kg Extra SpecificationsSurface quality: Ra≤0.8 μmThe ProFi-Sword module is a discharge system which fluidzes powder, providing good flow behavior and preventing bridge formation.&:nbsp:Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsD ...

General SKU315T1103 MakeAzo LocationBarneveld CEcheck TypeG21-text Main Features MaterialStainless steel Motor0.75 KW Inlet diameter300 mm Specified Features - Miscellaneous transport Capacity2x IBC Miscellaneous transport MaterialStainless steel General No.045256B Year of construction2005 Mounted in framecheck Mounted on legscheck Floor space4,10x1,40 m Total height2,71 m ATEX designedcheck Extra information screw conveyor.type DFS 100x1380 NE300size diameter 100 mm, length 1380 mm,outlet diameter: 125 mm0,75 kW, 230/400 Volt, (Ex) Vibration motor.0.4 kW, 400 Volt, (Ex) stainless steel drum in frame.type D1104XD305 on frame, volume 600 Ltr.connection in: 45 mm, 125mm (2x)connection out: 65 mmground surface: 1.7x1.6 mheight: 1.6 m Powdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesMiscellaneous transportPlastic & polymersCatalysts & fillers ...

General SKUR0445 MakeAZO GmbH &: Co KG (D) TypeD100/D350 No.1098984 Year of construction2012 LocationBarneveld Main Features MaterialStainless steel General Floorspace1,0x0,8 M Total height0,6 M Weight100 Kg Extra information This docking device creates a connection with low dust levels between two system components Powdered foodsGeneric medicinesTea, herbs & coffeeStarchSpicesCatalysts & fillersFood additivesSugarSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPowder fillersMinerals & inorganicAZOIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > Tea, herbs & coffeeIndustries > Food & Feed > StarchIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Pharmaceutical > Solid pharmaceuticsIndustries > C ...

General SKU225T219 MakeAlfa Laval TypeTV No.PH 139576 Year of construction1982 Mounted on legscheck Main Features MaterialStainless steel Volume400 Ltr. Motor0.55 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity400Ltr. Vessel sizesDia:1000x1200mm Conical bottomcheck Dished top sidecheck With covercheck ManholeDia: 420mm Top connectionsDia: 50mm (3x) OutletDia: 80mm With paddle stirrercheck Motor0.55kW, 220/380Volt, 1380rpm Speed mixing shaft102rpm MaterialStainless steel 1.4301 (304), Stainless steel 1.4571 (316Ti) General LocationBarneveld Floorspace1,3x1,2m Total height1,8m Weight350kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additive ...

General SKU299X419 MakeCoperion Werner &: Pfleiderer GmbH Stuttgart TypeKP-120/250 KombiPlast Compounder Mach.No.20493087 Year of construction2004 Sizes Screw diameter120 mm Main Features Motor310 KW Inlet diameter200 mm L/D15 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter120 mm L/D15 Co-rotatingcheck Electric heating4 Water coolingcheck DC-motor310kW, 440V, 1780rpm With variable speed drivecheck Screw speed365rpm Feeding with hoppercheck Feeding with metering screwSide feeder MaterialNitriding Steel 1.8550 General LocationBarneveld With switchgear(as is) Weight± 22.000 kg Extra information Complete line with side-feeder, discharge screw and partially control cabinet info compounder: Krupp Werner &: Pfleidere GmbH typ: D315 EXT Single screw screw dia: 250 mm screw lengte:1500 mm. screw van be heated L/D: 6 screw speed: ...

General SKU278X543 LocationBarneveld CEcheck MakeMettler Toledo TypeSafeline Main Features MaterialStainless steel/Mild steel Dia/Width150 mm Specified Features - Metal detector Metal detectorcheck Electric capacity0,5 kW, 230 volt Tunnel sizes200x35 mm Product space150x35 mm With conveyor beltcheck Belt width2x 150 mm Belt length2x 1200 mm With motor2x 0,37 kW, 380-420 volt, 1380 rpm With variable speed drivecheck Belt speed135 rpm With air pulse ejectioncheck MaterialMild steel, Plastic, Stainless steel General No.103322/103323 Year of construction2010 Mounted on frameon legs With switchcheck With switchgear(as is) Floorspace1,80x1,30 m Total height1,15 m Weight300 kgPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesMetal detectorsOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfe ...

Engine Brand: DOOSAN, Condition: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 230 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/doosan-gv158ti-used/731, , = More information =, , Type: Engine, Type of fuel: LPG, Type number: GV158TI; Transport weight [kg]: 1255

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm Control: FANUC 31i-B spindle turning speed - stepless: 15000 U/min spindle taper: BT 40 Big Plus spindle motor: 18,5 / 30 kW pallet table size: 500 x 500 mm workpiece weight: 500 kg distance spindle center to table: 80 - 810 mm Rapid Travel X / Y / Z-Achse: 60 m/min dimension of workpiece: 800 x 1000 mm total power requirement: 80 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,45 x 2,68 x 2,88 m Horizontal CNC machining centre - CNC control FANUC 31i-B - Tool changer 60-fold (BT 40 Big Plus) - 2 pallet changer(pallet 24-M16) - Table / Pallet indexing Full B axis. - Pullstud Nikken PS-806. Maximum torque 229.9/ 206.9/ 147.2/ 119.4N.m. - Coolant/Filtering Unit - Chip Conveyor - Exhauster The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine Brand: DORMAN, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Working Hours: 3215 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 200 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/dorman-8jt-used-engine-par ts/42341, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 2.390 kg, Type number: 8JT

The Dorst TPA 15/3 is a used mechanical powder compaction press designed for precision and efficiency in industrial applications. It provides a maximum pressing force of 150 kN and a withdrawal force of 100 kN, supporting a variety of compaction tasks. With an upper punch stroke of 100 mm and a range of 70 mm for adjusting the travel, this machine offers flexibility for different requirements. Operating at speeds of 7 to 32 strokes per minute, it ensures a reliable production throughput. This press allows for a maximum filling height of 70 mm and pressing travel up to 35 mm, suitable for a range of powder compaction needs. The machine is fitted with a compressed air system that has an intake of around 70 liters per minute and a total connected load of approximately 6 kW. It is compact yet robust, with dimensions of about 1400 mm in width, 1300 mm in depth, and 2650 mm in height, weighing ...

The Dorst TPA 6 is a used mechanical powder compaction press suitable for various industrial applications due to its robust performance and flexibility. It boasts a maximum pressing force of 60 kN and a withdrawal force of 30 kN, addressing a wide range of compaction needs. The machine supports a maximum filling height of 70 mm and a pressing travel of 30 mm, with an upper punch stroke of 95 mm and an adjustable travel of 50 mm. This ensures precise control over the compaction process. Operating at speeds between 7 to 32 strokes per minute, the Dorst TPA 6 consumes approximately 70 liters of compressed air per minute and has a total connected load of about 3.5 kW. It measures 2220 mm in width, 1060 mm in depth, and 2250 mm in height, weighing around 1,200 kg. With a gear oil capacity of 12 liters and a workplace-related sound level of 75 dB(A), it is designed to endure continuous use whi ...

The Dorst TPA 4 is a used mechanical powder compaction press well-regarded for its sturdy performance in various industrial settings. It features a maximum pressing force of 40 kN and a withdrawal force of 30 kN, making it versatile for different compaction tasks. With a maximum filling height of 70 mm and a pressing travel of 30 mm, this machine efficiently handles varied operational demands. The upper punch has a stroke of 95 mm with an adjustable travel of 50 mm, enabling precise control during processes. The press operates within a speed range of 7 to 32 strokes per minute, consuming around 70 liters of compressed air per minute and requiring a total connected load of approximately 3.5 kW. It is designed with dimensions of 2220 mm in width, 1060 mm in depth, and 2250 mm in height, while weighing about 1,200 kg. The gear oil capacity is 12 liters, ensuring durability and the ability t ...

x-travel: 900 mm y-travel: 550 mm z-travel: 500 mm Control: FANUC 31i-b tool change unit: 30 pos. table-size: 1.000 x 500 mm table weight: 700 Kg spindle taper: HSK - A 63 number of spindle speeds: 20.000 U/min/rpm Spindle power: 22 Kw Working hours: 10.816 h Spindle hours: 2.352 h Internal cooling system: Distance between table and spindle: 150/690 mm chip conveyor: kW weight of the machine ca.: 9 t dimensions of the machine ca.: 2.530 x 2.900 x 3.064 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stroj je v dobrém technickém stavu, po předchozí dohodě možnost odzkoušení.

Double T beam / I 260 profile / crane rail 6 beams available, each approx. 10 meters long Price per carrier 500 Euro net Weight per carrier is approx. 500 kg I 260 Profiles with square solid material welded on it ( 4 x 3 cm ) Shipping available for an extra charge VAT can be declared

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm

An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible.

Silo system, consisting of 10 silos (8 65 m³, 1 50 m³, 1 35 m³). Condition very well placed inside. Mining by the buyer is required.

Used Waldner Dosomat 10.4 rotary machine. New: 2011. Voltage: 230/400V AC. Capacity: 8,000–9,600 pieces/hour. Weight: 3,500 kg.

Used Waldner Dosomat 10.4 rotary machine. New: 2005. Voltage: 230/400V AC 50 Hz. Capacity: 7,200 pieces/hour. Weight: 3,500 kg.

Used three-phase transformer EBG Dove 500 kVA, 50 Hz, built in 1989; functional,

A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible.

Spiral mixer Capacity: 75 kg flour Kemper Dough capacity: 120kg Stainless steel bowl Voltage: 380V / 50Hz / 3 N/PE