do all used for sale

800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request

McIntyre 200B Shear Available with or without a stand, this machine might look small but it has a big cutting capacity Small but powerful McIntyre's wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only a blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it. Our company can provide this equipment with short delivery time.

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

McIntyre 600 GT Shear Another Shear in the McIntyre GT Range, the 600 gives a massive cutting area for its relatively diminutive size. Versatile The 600 GT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation. Ideal for larger items such as car radiators which can be handled in just one pass, the 600 GT can also be adapted to process catalytic converters.

Manufacturer: Diebels GbR recycling machines Cutting capacity: 30 ton Materials:-Aluminium (cylinder heads), brass (taps), copper, etc. Special features: work desk side folding Weight: 1100 kg Drive: 7,5 kw / 400 V Control: foot pedal

Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal

The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal

McIntyre 500 GT Shear The 500 GT is designed for those needing just a bit more blade length without an equivalent increase in price Versatile The 500 GT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non-ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to double up as a catalytic converter shear.

McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.

McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.

McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).

McIntyre 640-240T Shear A beast of a machine, the 640-240T is strong, reliable and able to cut up to 88mm (3.5") mild steel High capacity Available as an electric or diesel version, the 640-240T is one of McIntyre’s most rugged pieces of equipment and offers more cutting capability than any other shear of its size. The 640-240T can be fitted with solenoid control allowing it to be coupled with infeed and out feed conveyors. Other options include; forced air cooling for hotter climates and an infeed table to facilitate the handling of sheets or long pieces of extrusion (as shown).

Ladies and gentlemen, we offer: Alligator scissors shepherds: Type: Proto III Drive: 18.5 KW Number of cuts per minute: 22 Measuring opening Knife tip: 310 mm Knife length: 810 mm Weight: 6.8 tons Machine has been overhauled. Control cabinet renewed

Manufacturer: Mc Intyre Knife length: 508 mm Opening of measurement: 250 mm Cutting capacity: 120 tons Round iron ST 37: 67 mm diameter Number of strokes at 1/4 opening: 100 per minute Number of strokes at full opening: 20 per minute Dimensions ( L x W x H ): 1650 x 915 x 1490 mm Weight: 1143 kg Drive: 7.5 kw / 400 V Operation: foot pedal Alligator scissors JMC 500 HD The JMC 500 HD has a hydraulic holder. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket.

Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal

Item number 90023-0048 Insert Card 177, Input Card Allen Bradley for Tetra Pak e.g. TBA 8 development step 50V and before

Item number 90023-0051 Output module green l771-OC Allen Bradley for Tetra Pak TBA 8 or TBA 9 aseptic filling machine technology version 50 V and in front

Item number 90023-0081 1711-DKC (24 V) Gray Encoder Module Allen Bradley for Tetra Pak TBA 8, TBA 9 aseptic filling machine technology version 50 V or before

Used JMC 407 Kat Alligator Scissors Alligator scissors JMC 407Cat The catalyst version JMC 407 has an additional "V-holder" in the cutting area for adjustment when cutting or opening the catalysts. In stock at the end of March 2021 Knife length: 407 mm Measuring opening: 250 mm Cutting capacity: 90 tons Round iron ST 37: 57 mm diameter Number of strokes at 1/4 opening: 63 / min Number of strokes at full opening: 11 / min Dimensions (L x W x H): 1550 x 880 x 1120 mm Weight: 880 kg Drive: 7.5 kw / 380 V Operation: Foot pedal

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

Alligator scissors Lindemann Alibo The Lindemann Alibo has a mechanical hold-down. The scissor head is protected with a safety basket. Machine On hand Knife length : 760 mm Weight : 4200 kg Mouth width at the tip : 200 mm Cutting capacity: 0.45 kN/ mm² : Ø 70 mm Number of strokes : 20 – 40 cuts/min Dimensions: 4.20 x 1.50 x 1.80 meters Drive: 15 kw Hold-down: Mechanical

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

recoem scrap shear alligator scissors HKM 60 Cutting pressure : 60 t Year of construction : 2021 Condition : New Dimensions : L x W x H 2200 x 750 x 1100 mm Knife opening : 280 mm Knife length : 610 mm Cutting speed : 46 mm/sec. Power : 5,5 kW

From overproduction 3 pieces available Abm;approx. 3000 x 300 x 105mm Aluminum construction: Conveyor belt width without shaft edge PVC conveyor belt smooth Conveyor belt green, 2-layer particularly transversely stable endless welded with step connection antistatic due to threads in the fabric of the running side Drive: Motor approx. 0.18Kw, speed 0.3m/sec. controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Drive, motor control optional Our core competence lies in providing the customer with exactly what he really needs. Together with our customers, we develop customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separator, ov ...

used scrap shears / Aligator scissors Manufacturer: Schlüter Maschinenfabrik Type: MGA 6 Year of construction: 1974 specifications: Cutting performance at 37 kg/mm²: Round iron: up to 18 mm Square liners: up to 15 mm Flat iron: up to 60 x 8 mm Sheet: up to 7 mm

Used machine in good condition. Available for immediate delivery. - Air Valves: n/a - Distance between tie-bars (h x v): 460 x 410 mm - Screw diameter: 25 mm - Shot weight max: 54 g - Injection rate: 108 cm?/s - Injection pressure: 2.400 bar - Injection volume: 59 cm? - Screw L/D ratio: 24,8 - Nozzle stroke / force max.: 225 / 28 mm / kN - Clamping force: 1.000 kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Daylight between platens max: 800 mm - Platen size (h x v): 650 x 600 mm - Cascades / Sequential valve gates: n/a - Heating zones: 4 2 - Control: CC200 - Core pulls: n/a - Oil tank capacity: - l - Operating hours: 16.280 - Power: installed max: 22 kW - Weight: 4.500 kg - Dimensions (long x wide x high): 4.300 x 1.300 x 1.900 mm

Alligator shear ideal for processing weapons Fully Guarded As New 660mm blade length

blade length 430mm; 5047

blade length 430mm; 5047

Capacity: 180 x 100 mm. Spindles: 4 Bottom with referencing 4kW, fence 3kW, near 3kW, top 4kW Motorised thickness adjustment 4 cutterblocks Chaindrive Infeed table 1m70. long

Capacity: 260 x 130 mm. Spindles: 5 Shaft diameter 40 mm Bottom 4 kW, right/left 7,5 kW, top 5,5 kW, bottom 4 kW Mobile axle for various widths Cardan shaft drive Pneumatic pressures Feed speed variable, motor 3 kW Motorised height adjustment of top presssure beam Infeed table 2200 mm length tools not included

Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021.

Output: 39,600/h, additional accessories are available.

There are four HEUFT inspectors available (1) empty container inspector with rejection (2) empty container inspector (3) logo detection with rejection (4) empty bottle inspector with reject table and rejections (5) belts and belt control with the complete motors.

With documentation and pusher, has been regularly serviced, operating hours: 23,476h, the machine has already been dismantled.

Recycling machine trade AGICOM- Pedergnana OG, Technical data of the alligator shears S 900: Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4.2 x W 1.2 x H 1.7 m Total weight: 7.5 tons Manafacture: Lefort Overhauled used machine; Machine ready for use! On hand

Metal powder alloy CASTOLIN ROTOTEC LUBROTEC 19985 medium-hard, highly machinable metal powder alloy Quantity: 1.2 kg Dimensions: 90 x 90 x 130 mm

Alloy Powder CASTOLIN-EUTECTIC EUTALLOY 12494 RC35-40 Packing unit: 3.0 kg New ! Dimensions ( packaging ): 85 x 85 x 230 mm

Universal soldering and welding torch ROTHENBERGER Allgas 2000 with oxygen and propane gas cylinder mobile Dimensions: 440 x 440 x850 mm

High-alloy metal powder cored wire, stainless steel welding wire BÖHLER CN 23/12-MC 57886 Diameter: Ø 1.2 mm Quantity: 16.0 kg Reel: Ø 300 mm New ! Dimension ( single ): 300 x 300 x 100 mm Dimension ( packaging ): 310 x 310 x 105 mm

High-alloy cored wire electrode, stainless steel welding wire BÖHLER EAS 4 PW-FD 36059 Diameter: Ø 1.2 mm Quantity: approx. 14.5 kg Reel: Ø 300 mm New Dimension ( single ): 300 x 300 x 100 mm Dimension ( packaging ): 310 x 310 x 105 mm

Recycling machine trade AGICOM-Pedergnana OG: Refurbished used machine, operational, in stock. Knife length: 900 mm Max. knife opening: approx. 510 mm Main drive: 22 kW Overall dimensions: L 4200 x W 1200 x H 1700 mm Total weight: 7.5 tons

Used Carpentry Universal Circular Saw Tailor Type 2406 Top Cutting height: approx. 250 mm Turntable rotatable 180 degrees Swivel 90 degrees- 30 degrees Cutting width adjustment 0-650 mm Clamping cylinder right Roller conveyor left 3000 mm Very good condition Functionally tested Shipping available at an additional cost

• Wrap-around labeller for bottles • Operation from left to right • Output max. 7200 objects/h • Object height 25-205 mm • Object diam. 15-65 mm • Label height max. 120 mm • Label length max. 135 mm • Hot printing device Allen Coding • Camera print control by Laetus Wt • Bad bottle discharge • Electr. connection 400V/50Hz

• For vials/bottles diam. 16-78 mm, height max. 220 mm, output max. 350 objects/min • Label length 15 - 200 mm, height 10-100 mm, label roll diam. max. 400 mm • Hot printing device Graseby Allen • Operation from left to right • Dispensing table adjustable in height, depth across direction, inclinaton across direction • Code reading Laetus Argus 6 • Bad discharge in scrap tray by air nozzle • Separating screw for vial diam. 24 mm, height 40 mm • Counter, control for feeding rotary table (rotary table not attached) • PLC Siemens S5-95U • Electr. connection 400V/50Hz

Durma TP123 CNC Punch Machine 30 Ton including tools Machine is like new condition

Equipment Condition - Good Characteristics: - Injection code 180N - Screw pair diameter 40 mm - Execution of the screw M7 - barrier auger - Open nozzle - Vibration mounts - Standard injection speed - Pusher return control In a set: - Lithium industrial mold for the manufacture of parts M2 nozzle for the bioreactor, 4 nests. - Hot channel temperature controller, including connecting cables and 8 zone connectors - Spare socket (die and punch) for the production mold for the manufacture of the part “M2 nozzle for the bioreactor” - Dispenser volumetric LYBRA LV2 - Single phase loader S52 - Water chiller SCA1911 - Crusher model 32-20 / JM - Belt conveyor N-CPR4 additional characteristics in attachments

Brazing brass brazing, with flux, 25 x 5 rods ROTHENBERGER ROLOT 602 3.3.5602 DIN 1733 / 8513 diameter: Ø 2.5 mm rod length: 333 mm Scope of delivery: one box with 25 individual packages, 5 rods per individual package areas of application: Metallic compounds: iron, common steel, copper, nickel and cast steel, non-ferrous metals Other quantities on request ! New ! Dimensions ( individual packaging ): 400 x 55 x 5 mm Dimensions (packaging): 420 x 190 x 65 mm

Brazing brazing brass, 25 x 8 rods ROTHENBERGER ROLOT 603 3.3.5603 DIN 1733 / 8513 diameter: Ø 1.5 mm rod length: 333 mm Scope of delivery: one box with 25 individual packages, 8 bars per individual package areas of application: Metallic compounds: iron, common steel, copper, nickel and cast steel, non-ferrous metals Other quantities on request ! New ! Dimensions ( individual packaging ): 400 x 55 x 5 mm Dimensions (packaging): 420 x 190 x 65 mm

Carpentry Universal Circular Saw used Type: 2003 Cutting height: 200 mm Swivel 45 degrees Turntable rotatable 135 degrees Motor power 7 kW Laser Cut Display Roller conveyor right approx. 2350 mm with stop ruler and stop pawl Functionally tested Shipping available at an additional cost.