do all used for sale

Description: X-axis Storke 268 mm Y-axis Stroke 488 mm 12-station Turret TRANSPORT DIMENSIONS: Machine body: 1460x2600x2900 mm Evacuator: 2700x1600x1600 mm Transformer: 550x400x600 mm A LOW-BOY TRAILER IS REQUIRED FOR TRANSPORT turning height: 460 mm, swing diameter: 496 mm, control: FANUC i-Series, turning speed range: 3,000 rpm, feed range: 20 mm/min, total power requirement: 18.5/22 kW, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 3,200 mm

2.30 - 4.10 m, with 1 stackable frame

Extraction system Donaldson Torit (DCE) DFT 3-18 Dust Control Plant Year of construction: 2002 Model: DFT 3-18R Capacity: 8,000cbm/h, Motor: 10kW Dust Control Plant- EX Protected design Filter systems for welding fumes, for aluminium and stainless steel, Outdoor installation

Oliver Douglas LTD. dishwasher, type: PAN800, machine number: 14/3944, 415 V, 50 Hz, 34 kW, dimensions: 1760 mm x 1300 mm x 1520 mm.

36 Dolav pallet boxes, dimensions: (36x) 1200 mm x 1000 mm x 740 mm.

Dorit/vanguard injector, type: PSM 21, serial number: 13481-220, 415 V, 3 Ph, 50 Hz, 2.8 A, 2.5 kW, 21 needles, plastic belt, belt width: 300 mm, total dimensions: 1950 mm x 600 mm x 1950 mm.

Manufacturer: domino - Model: G series - Type: inkjet printing Manufacturer: Cermac - Type: conveyor Camera: Keyence - Type: detection camera Ejection: compressed air Motor power : 0,12 kW Conveyor width: 200 mm Video in operation: https://www.youtube.com/watch?v=cZdCP2Gy0hI This equipment can be part of a set : Pester Pewo-pack 200 SN-K - Shrinkwrapper -> https://www.osertech.eu/en/product/pester-pewo-pack-200-sn-k-shrinkwra pper/ Natel NM25 - Accumulation table -> https://www.osertech.eu/en/product/natel-nm25-accumulation-table/

Manufacturer : Talsa Model: MIX 100 P Year : 2009 Type: Bowl mixer / dough mixing machine Materials: stainless steel Power : 0,8 KW Direction of rotation: clockwise / anti-clockwise

Type : piston filler Mode: Automatic / semi-automatic (shot by shot) Operation : pneumatic Foot pedal action Dosing pump: manual adjustment Feeding hopper Material : Stainless steel Temperature sensor

Saw band length max.: 3,912 mm, roller diameter: 510 mm, cutting height: 320 mm, table length: 660 mm, table depth: 660 mm, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 2,500 mm, weight approx.: 800 kg

The DOOSAN HM 6300 is a 4-axis horizontal machining centre from 2009 with a CNC FANUC 31i-Mod.A control unit. It offers expansive axis movement: 1000 mm on X, 800 mm on Y, and 850 mm on Z, with rapid 48 m/min travel. The two 630 x 630 mm pallets, with a 1° indexing and 180° rotary change, support 1,200 kg each. The spindle, powered by a 30 kW motor, reaches 6000 rpm, and the 60-position tool chain accommodates various tool sizes. Accessories include a chip conveyor, Renishaw predisposition, and a high-pressure coolant system. Contact us for more details.

Description: 40 tool ATC 20 bar spindle thru coolant Full cover Chip conveyor Fanuc 31iA controller Important Note - Angle plate and tool are excluded. Includes shipping to any major seaport in the world. x-motion: 3,000 mm, y-motion: 2,000 mm, z-motion: 2,000 mm, w - axis: 700 mm, table surface area l x w : 1,800 x 2,200 mm, weight approx.: 43,000 kg, Approx. Onsite Dimension. (l x w x h): 8,970 x 7,660 x 4,910 mm

Description: XZ travel: 580/1000mm 32” hyd. chuck Manual tool presetter Chip conveyor Includes shipping to any major seaport in the world. turning height: 1,000 mm, swing diameter: 1,100 mm, control: Fanuc, turning speed range: 800 rpm, total power requirement: 45/55 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 2,830 x 3,305 x 4,012 mm

New CoBot Brand: Doosan Robotics Type: H2017 The video shows a DOOSAN H2017 CoBot in cooperation with a CNC machining center VITAP K2 2.0 with automatic package. The Doosan Robotics H2017 Carries loads up to 20kg and works with a reach up to 1700mm. Including robot column, vacuum gripper, commissioning, pre-assembly, interface, training, safety technology and CE certification, the recommended retail price is approx. 65,000? net. The time required for teaching new parts is about one hour - always depending on the complexity of the work steps. The optimal area of application for this CoBot is recurring small batches and series that utilize the robot over several shifts. Have you become curious? Then please feel free to contact us about the topic!

CONTROLS   NC controls WORKING RANGE - BORING   drilling capacity full bore (steel): 40 mm   throat (max): 800 mm SPINDLE / HEAD   spindle revolutions (min): 335 /min   spindle revolutions (max): 1800 /min   number of gears: 2   tool fixture: MK 4 TECHNICAL SPECIFICATION   table surface (left-right): 1000 mm   table surface (front-back): 500 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2500 mm   space requirements -front/back-: 1250 mm   total height: 2500 mm - 9`600h operating hours - div. tool holders, - coolant system - with cube table

CONTROLS   CNC controls FANUC 18 T BASIC FUNCTIONS   number of spindles: 1   number of turrets: 1   live positions: yes   number of c-axes: 1 WORKING RANGE TURNING   swing diameter (max): 700 mm   turning diameter (max): 700 mm MAIN SPINDLE   spindle revolutions (max): 3500 /min   spindle bore diameter: 91 mm   c-axis: yes COUNTER SPINDLE   Z-axis travel: 1105 mm X/Z SLIDE   X-axis travel: 362 mm   tool fixture: Turret   number of tool positions (total): 12 TOOL MAGAZINE   number of positions: 12 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4820 mm   space requirements -front/back-: 3200 mm   total he ...

The process engineering focus of the Doppstadt screw press is not on extracting as much biogas from the feed material as possible, but rather on providing a clean biogas substrate with a single machine, that requires no further treatment. Working chamber of the press screw diameter/length: 500mm/2000mm. Pressing baskets: round sieve holes with 8mm diameter. Feed hopper: volume: 5m³, feed height: 2900mm. Foldable one-piece rear belt: dimensions X/Y/Z: 5000mm/1200mm/3000mm with smooth belt. Eccentric screw pump for filtrate: max. delivery head/delivery length: 10m/15m. Throughput: 8-12t/h, liquid phase TS: 16%-23%. The machine is in mint condition with only 300 hours of operation. Including feed hopper DM 205, folding one-piece rear belt and eccentric screw pump for filtrate. Documentation available. On-site inspection is possible.

Description: PDF Data Sheet attached in the 'Documents' section Machine declared with approximately 4500 working hours. Equipped with : ACE HP 5100 Evacuator, YOM 2014, 338 kg NANACON CIL1101 refrigeration unit Transformer JEIL TRANS, YOM 2014, 334 kg High pressure unit HIPRECO KHS-230/400214-00244 Not included in sale : ALLMATIC parts holder not included with sale. HEPA filter LNS not included with sale. z-motion: 750 mm, max. workpiece weight between centers: 500 kg, x-motion: 850 mm, y-motion: 700 mm, control: FANUC Series 31i-MODEL B, pallet table size: 500x500 mm, numbers of pallets: 2, taper: ISO#40, 7/24 Taper, toolchanger positions: 80, feed range: 60,000 mm/min, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 4,500 x 3,000 mm

ARBURG ALLROUNDER Arburg Allrounder 720 S 3200-1300 - Plastic Injection Machine screw size:70 mm injection shot weight in Polysterol:984 g/PS closing pressure:3500 kN core drawing:2 control:Selogica daylight:720 x 720 mm opening stroke:700 mm mould height - Max./min.:300 -700 mm daylight between platens - max.:1000-1400 mm weight of the machine ca.:17,7 t - highly wear-resistant plastification unit - Technology step 3 - hydraulic plant with 3 regulating pumps - Technology step 2 - servo-controlled / two-circuit pump technology - Increased power for heating control circuits 1-6 to 3.6 kW each - clamping force increased to 350 Mp - mould blow unit 1 with pressure reducer - mould blow unit 2 with pressure reducer - Core pull 1 - Core pull 2 - Interface for robot system according to EUROMAP 12 - Host computer interface for ALS with communication node Ethernet

Annealing oven box furnace KU500 all4-PCB from the Switzerland The investment is for the production of thin-film - photovoltaic modules CIS / CIGS (module size 1250 x 650) bildungsportal. The task of the furnace is to anneal coated substrates in the production process. Cycle time 50 sec (first stage) Year of manufacture 2010 300 running BRA, mint already properly decomposed, which is not the original on the images, which has eight dry fan New price 306.000,-net

LAYHER ALLROUND Big parcel LAYHER ALLROUND in very good condition. Only requests with company name, address and tel/faxnumbers will be answered. VU-RO Bouwmaterieel NL-1113 EC Diemen Tel. + 31 (0) 20 698 1900 Fax + 31 (0) 20 698 1902 vuro@vuro.nl

Technische Daten: Verfahrwege: - Arbeitsbereich X - Achse 1640 mm - Arbeitsbereich Y - Achse 3400 mm - Arbeitsbereich Z - Achse 250 mm Arbeitsbereich: - Arbeitsbereich X - Achse 1260 mm - Arbeitsbereich Y - Achse 3060 mm - Arbeitsbereich Z - Achse 100 mm - Spindel Italian HITECO 9.0 kw / HSK 63 F - Spindel Drehzahl stufenlos 0-24.000 rpm - Verfahrgeschwindigkeit 80 m/min. - Arbeitsgeschwindigkeit 20 m/min. - Karusell Werkzeugwechseler 8-fach - Bohraggergat mit 9 Spindeln vertikal + 6 Spindeln horizontal + Nutsägeaggregat - Verfahrsystem (X & Y Achse) Zahnstangen-Ritzelantrieb - Verfahrsystem (Z Achse) Kugelrollspindel - Verfahrmotoren AC Servo Motoren YASKAWA - CAD/CAM Software EXICAM (Englisch) - Steuerung / Controller OSAI / Italy - Arbeitsgenauigkeit 0.05 mm - Konsolentisch mit einfach zu positionierenden Vakuumsaugern (SCHMALZ)   und absenkbaren Werkstückseitenanschlägen - Werkst ...

Out of stock, we offer spare parts for McIntyre alligator scissors. Main wearing parts such as blades for JMC 150, JMC 200B, JMC 320; JMC 407, JMC 500, JMC 600, JMC 640, JMC 900. In addition you will find control blocks, hoists, foot control, springs, screws for the knife sets, adjusting screws on the knife sets, adjusting screw cutter with brass wear plate, electric box next to other parts always in stock. Inquire. We help in the short term. Also express shipping possible. By phone at 02824/4193

Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal

Ref. no.: 18326 Hersteller: ARBURG Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200-400 mm Opening width: 500-700 mm Platen size (h x v): 510 x 510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,2 x 1,5 x 2,1 m Machine weight: 3740 kg Additional information & extras Core pull: 1 pcs Accumulator: 1 pcs Robot Producer: Sepro Type: SR 55 Year: 2020 Weight: 56 kg

All-metal damper, machine foot set, leveling foot set, vibration isolator PAULSTRA V1H752-11 Material (body and bottom): Steel Material (axle): high strength aluminum alloy material (all-metal damping pad) Stainless steel wire Thread: M20 x 2,5 Screw: M20 x 2.5 x 60 mm All metal damper set consists of 4 feet ! used, checked ! Dimensions ( one damper ): 152 x 124 x 60 mm Dimensions ( packaging ): 300 x 250 x 110 mm

McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.

Manufacturer: Deltax Holder: Hydraulic holder Dimensions (L x W x H): 2010 x 902 x 1500 mm Knife length: 610 mm Number of strokes at 1/4 opening: 40 cuts at quarter opening Number of strokes at full opening: 12 cuts at full opening Measuring opening: 330 mm Cutting force: 206 tons Drive: 11 kw/32 CEE plug Weight: approx. 2250 kg Deltax_DTX600S with hydraulic holder (New machine) The DTX 600S has 20% more cutting power than the standard Deltax DTX600. This was achieved by installing a larger cylinder and using a smaller second pump. A larger first pump is used to maintain the same cutting speed. All other modifications are used to amplify the machine to handle the additional power. The weight gain due to the reinforcement modifications and the larger pestle is about 250 kg. Alternatively: Deltax DTX600 Difference Cutting force: 172 tons | Weight: 2000Kg | All othe ...

McIntyre 150 Shear Designed as a low-cost answer to metal cleaning, an ordinary 13amp socket and suitable bench are all you need to put the 150 shear through its paces Versatile The McIntyre 150 Shear is ideal for all lighter metal shearing, but is powerful enough to tackle gun metal valves, bath taps, cable and other non-ferrous cleaning operations. The McIntyre 150 Shear is small enough to be moved easily around the yard and will be a versatile addition to any size of yard. Our company can provide it with short delivery time.

Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations. The 407 can also be used to cut ferrous metals. Why

McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.

McIntyre 500HD Shear This new generation shear is faster and more powerful than any other machine of its size. Featuring an automatic hold down clamp and 20 inch blade, this model is available as electric or diesel Fast and strong This 508mm, 20 inch, blade shear has been built for speed and power, and will outperform every other machine in its field. The McIntyre 500HD has enough shear force to deal with a wide range of operations and materials including: the cleaning of automotive aluminium scrap, whole gearboxes, cylinder heads and blocks, oversized gate valves, and the handling of all non-ferrous separations. It can also be used for cropping ferrous metals.

McIntyre 600 CAT Shear Cat shears are powerful enough to deal with a wide range of operations including the cleaning of automotive aluminium scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and the handling of all non ferrous separations. VERSATILE The 600 CAT features a blade guard system which gives good visibility to the operator and acts as a hold down to prevent material kick back. The machine is foot pedal operated and the jaws return to the open position once the foot pedal is released to increase safety. Wheels are fitted as standard, and forklift points have been included on the body of the machine to ensure that it can be safely lifted both within the yard and during transportation.

McIntyre 900 Diesel Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses in particular the handling of larger pieces of non ferrous scrap. The 900 can be operated via a foot pedal for more accurate control, or can be set to work continuously to enhance processing speed. The machine is built to last using top quality components and is equipped with a heavy duty guard to improve operator safety.

McIntyre 900 Shear A reliable workhorse equipped with 920mm (36.25") blades to allow you to handle larger pieces of material with ease All round yard shear Designed to give maximum possible blade length without losing cutting capacity, the 900 shear is perfect for a wide variety of yard uses, in particular the handling of larger pieces of non-ferrous scrap. The 900 can be fitted with solenoid control allowing it to be coupled to infeed or outfeed conveyors. Other optional equipment for the 900 shears includes oil-immersed tank heaters, forced air cooling and infeed table to handle oversized material

McIntyre 320 Shear The well established 320 Shear is a must for any yard and is now recognised as the industry standard for all shears of this type Powerful and high quality One of our most popular shears, the McIntyre 320 Shear has maintained dominance in a demanding market due to its strength, quality and reliability

McIntyre 407 Shear An affordable efficient 407mm (16") blade shear with enough power and speed to handle a wide variety of cutting tasks Robust, affordable, efficient Built originally for scrapyard use, the McIntyre 407 shear is robust enough to withstand the most difficult of working environments. It is now our most popular alligator shear with more than 2000 still in daily use worldwide. The McIntyre 407 is able to handle; automotive scrap, whole gear boxes, cylinder heads and blocks, oversized gate valves and of course all the usual non ferrous metal separations.

Kuli - All-purpose stage

High alloy stainless steel round steel, 1.4104, X14CrMoS17, , new -75% We hereby give a bundle of a cold-drawn round steel, 1.4104. - Diameters 15, 20, 25, 30, 35, 40, 50, 60, etc. - Lengths approx. 3 to 3.5m, including some shorter pieces - Sales weight is approx. 800 to 1000kg - Submission as a total item - Before selling, all parts are tested with a spectral analyzer, so we only supply this material. - Pick-up by the customer is also possible - We have set an absolute special price here - If you have a VAT number, we will be happy to issue you with an invoice without VAT. - We have the round steels from a raw material warehouse of a certified company - Factory certificates not available.

Metal powder alloy CASTOLIN ROTOTEC EXOTEC 29904 exothermic reacting metal powder alloy as primer for all ROTOTEC applications Quantity: 1kg New ! Dimensions: 90 x 90 x 130 mm

• Output max. 80 objects/min • Object diam. max. 100 mm • Label tape width max. 100 mm • Label roll diameter max. 360 mm • Object feeder, drive adjustable • Hot-printing unit Wilux Print Codlux LP-40 (without embossing stick) • Code reading Laetus IPC Commander 110S with code camera COCAM wt880 for all common 1D and 2D barcodes as well as pharma code, software package Laetus Navigator version v2.2, retrofitted in 2016 • Label presence check • Height adjustment dispenser • Massage belt, drive adjustable, height 100 mm • Machine standstill with alarm in case of wrong code or label not present • Drive 230V/50Hz

Streifeneinleger fuer alle Druckmaschinentypen - Strip feeder for all types of printing machines Mediprint STR 4.1 Year 2002 - Serial-No. 11761 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

All-Fluid Pressure Switch, Electromechanically Actuated, Pressure Switch NORGREN Type 20D 180630000000000000 range: 5 - 63 bar medium: neutral, aggressive, non-flammable gases and fluids switching capacity (AC): max. 250 V 3 A switching capacity ( DC ): max. 125 V 0,05 A pressure connection: G 1/4( inch ) New, with pads ! Dimensions ( pressure switch ): 153 x 140 x 44 mm

Description: • All terrain vehicle • Spanish registration number 0040 HSP • Frame number e112001/116030012 • Turbo-diesel engine FORD 224DT , 4 cylinders, displacement 2179 cc, power 110 KW • Manual transmission, gearbox 6 gears • 4 wheel drive • Maximum speed 181 km/h, acceleration 0-100 km/h: 11.20 sec • Average consumption 7.00 l/100 km • BULLFACE electric winch • Mileage 197409 km according to the counter • This vehicle is delivered with 2 set of keys • Ownership change costs will be paid by the buyer • Spanish MOT certificate valid till 22/08/2023 • IMPORTANT: • Surplex will deliver this vehicle to the buyer with a Sale Notification in DGT (Spanish traffic authorities). Approx. Onsite Dimension. (l x w x h): 4,560 x 2,230 x 1,780 mm, weight approx.: 1,958 kg

Scania Austausch-Motor Typ= DI12-54A-PDE-Steuerung 242KW Aldrehzahlmotor incl.Anlasser,Lichtmaschine.Auch für Pflanzenölbetrieb geeignet. info@miw-zeven.de

A shelving system that can be used for shop fittings, as well as for storage by Tegometall, is offered. the frames of these shelves are deep approx. 2.80 m wide ca 2.18 m high 1.25 m In conjunction with Tegometallwand -, or gondola shelves, they are excellent for loading equipment. As they complete with chipboard, above it still reserves can be stored. The inner shelves can be equipped optionally with smooth or perforated walls, floors, bins, hooks, etc. so that they can be used for merchandise of any kind. Without this inner life they are storage racks, E.g. for the storage of larger materials and pallets. A double box with interior shelves is included in the offer, i.e. 3 red double frame (2.18 m high; 1.25 m deep, together approx. 5.60 m wide) with the necessary trusses and bridges of depth for each field a white double support backs, optional perforated, smooth or mixed for 4 fields  ...

JMC 407 overhauled new model / young device Drive: 7,5 KW Weight: 880 kg 4 x reversible knives Truck intake/wheels

800 MT extrusion press 1. container size 127mm diam x 560mm lenght 2. capacity: extrusion: 800t/1000t extrusion (low tonnage) at 210kg/cm: 697M Ton Main ram forward at 210 kg/cm: 112 M Ton Main ram return at 210 kg/cm: 63 M Ton Contianer seal at 210 kg/cm: 69 M Ton Contianer open at 210 kg/cm: 94 M Ton Piercing at 210 kg/cm: 102 M Ton Mandrel return at 210 kg/cm: 63 M Ton Die slode at 210 kg/cm: 12 M Ton Stroke Main ram: 1320 mm Container: 250 mm Speed 38.0mm/sec 44.0mm/sec More information on request