dnc used for sale

Lot of pneumatic parts Make : Vers. , partly new, 10 pcs. cylinder grey Martonair, used but good condition. 6 pcs. 100mm , RM8032B/M electr. Limit switch 2 pcs. 200mm, RM8032B/M electr. Limit switch 2 pcs. 250mm, detto 1 pc pistonless cylinder 1 pc. Festo DNC-32-260-PPV-30K2-66K8 new 1 pc. Festo DSNU-25-280 PPV-A 1 pc. Festo DSNU-20 – 150 PPV-A 3 pcs KNOTH , 35/25 , 50/25 , 70/50 , ( φ. / stroke ) Control block, 5 valves, 5/2 way. Electric. 24 V = Control block, 6 valves, 5/2 way. Electric. 24 V = Control block, 4 valves, 5/2 way. Electric. 24 V= 2 directional control valves , 3/2 , Festo, H-3- 1/4, manual operated 1 directional control valve, 4/3, Festo, HS-4- 3/8, manually operated Control block with 3 directional control valves and maintenance unit

Working width: 4100mm, pressing force: 1250kN, controls: DNC 80, length: 4350mm, width: 1300mm, height: 2660mm, weight: 11t, including tools.

Pressing force: 1250kN, bending length: 2550mm, oil volume: 250l, control: DNC 806 PS/K.

Pressing force: 2000kN, working width: 3600mm, max. stroke: 400mm, throat depth: 500mm, stops: 6, control: DNC 7000, weight: approx. 21000kg. Including various lower tools and dies with bolts as well as a holding rail. For example, prisms 7-90 and punches (straight and cranked) are included. Documentation is available. On-site inspection is possible.

Control Cybelec ... DNC 60 cutting length ... 2600 mm sheet thickness ... 8mm Drive... Hydraulic L x W x H ... 3550x2020x1850mm Machine weight... 6200kg Main engine power ... 15kW The machine is in good condition, possible to test under power.

Inv. Num. : 6443 Type: TECHNICA PLUS Producer: DERATECH Created: 2009 Parameters: Control system: Cybelec DNC 880 S Operating hours: 3040 h Compressive force: 250 t Maximum bending length: 4100 mm Total power requirement: 18.5 kW Machine weight: 18000 kg Equipment: Tools 2-axis backgauge

pressure: 100 t distance between columns: 2004 mm chamfer lenght: 3500 mm table height over floor: 760 mm stroke: 315 mm control: DNC 73 PC total power requirement: 11 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1x1,7x2,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...

Pusher servo with opening 1100 mm Pusher speed - up to 200 mm/s Control - CNC - DNC 60G HNC 4120 Cutting length 4 070 Cutting thickness – 45 kg/mm² Cutting thickness - steel 20 mm, stainless steel 13 mm Cutting angle (degrees) 0.5°-3.0° Number of cuts 6-9 cuts/min Number of clamps 21 pcs. Back gauge working range 1,000 mm Hydraulic volume 400 l Main motor 37 kW Back gauge motor 0.55 kW Dimensions 4570 mm, 2350 mm, 2900 mm Weight 26,000 kg

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 405 mm table width: 150 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 215 mm dayligth: 465 mm table height: 960 mm operating pressure: 320 bar oil volume: 200 l voltage: 3x 400 V total power requirement: 15.0 KW weight of the machine ca.: 9500 kg range L-W-H: 3958 x 2350 x 2750 mm maintained condition () Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-contro ...

Hydraulic Press Brake BEYELER PR6 100/2550 Year of construction: 1998 Command: CYBELEC DNC 804 PS/K 6 axes Capacity: 100 T x 2550 mm Maxi travel: 215 mm Throat depth: 405 mm Distance between uprights: 2050 mm Maxi closing speed: 200 mm/s Working speed: from 1 to 10 mm/s Motor: 7,5 kW sBack Rear Gauge R1 - R2 - Z1 - Z2 Dual pedal footswitch Voltage: 380 V Dimensions (L x W x H): 3000 x 2000 x 2550 mm Weight: 6,5 T

Key data: 200 t, 400 mm

Ref. No. 00785 Description of the plant: Used press brake Manufacturer: Hämmerle Model AP 200 – 3600 Built in 1991 Press force 2000KN (200 T) Ready to work 3600mm Maximum stroke 400mm Projection 500mm Keystrokes 6 Control DNC 7000 Installed power 18.5kW Weight 21,000 kg Condition of the plant under power Immediate Submission Date There are several tools that can be purchased in addition to the machine.

Key data: 150 t, 2550 mm

Stock number: 3866 CNC PRESS BRAKE Manufacturer: BEYELER, Type: PR 8 150D x 3100 mm Machine NO.: 96/445/002, Year of manufacture: 1996 Specifications: Gr. bending length 3100 mm Gr. pressure capacity 150 tons Stroke length 215 mm Column passage 2550 mm Projection 305 mm Total power 7.5 kW CNC control Cybelec DNC 908 PS Presscad Fabr. Controlled in 4 axis Y1-Y2-x1-x2 axes Length: 1900 mm, Height: 2600 mm, Width: 3500 mm, Weight: 9500 kg

sheet width: 3200 mm plate thickness: 4,0 mm distance between columns: 3300 mm daylight opening: OW 400 mm adjustment: UW 80 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN air pressure - required: 4.5 - 6.0 bar total power requirement: 9,8 kW oil volume: 160 l weight: 8500 kg range L-W-H: 4550 x 2530 x 2275 mm well-maintained machine with lots of special accessories () last maintenance/test in JUNE 2023 Furnishing: - CNC screen control CYBELEC model DNC-884-PP32 Swivel control panel, front right - CNC controlled / electro-motorized back gauge pneumatic / lowerable material stop fingers Adjustment speed max. 250 mm/sec. Drive power 0.5 kw Sheet metal support table at the back - motorized lower beam adjustment (S axis) Adjustment range max. 80.0 mm - hydraulic swivel movement of the lower beam - hydraulic movement of the upper beam Adjustment range max. 400 mm Lifting ...

Hydraulic press brake man. by Beyeler Switzerland, type RT 125 x3100. CNC control Cybelec DNC 3300PS, 3 controlled axes - controlled axes Y1+Y2+X CNC control very easy to use Pressure 125 tons, bending length 3100 mm. Between supports 2650 mm. Cylinder stroke 220 mm, loading 300 mm. 10 kW motor, weight 8.8 tons. A set of Amada-Promecam standard punches, + 9 groove die 120x120 mm. Full technical documentation DTR, occupational health and safety manual in Polish. We offer after-sales repair service and adjustments of CNC electronics and hydraulics.

Key data: 160 mm, 400 mm

Type smile 400 VSM400-00475 Year of construction 2004 Travel X 160 mm Z 400 mm Diameter 320 mm Longitudinal measuring range 400 mm Measuring diameter 320 mm Other equipment and accessories: Adapter from SK50 -> SK40 Adapter from SK50 -> VDI30 Adapter from SK50 -> HSK63 Software Zoller DNC manager Vers. 1.04.2

Hydraulic press brake prod. by Beyeler Switzerland, type PR6 150x3100, rb. 1998. CNC control Cybelec DNC 80 PS, 6 controlled axes - controlled axes Y1+Y2+X+R+Z1+Z2 +compensation of table deflection arrow controlled from CNC. Windows, 2D graphics, color LCD screen, simulation of bending process. Hydraulic punch clamping. Pressure 150 tons, bending length 3100 mm. Between supports 2650 mm. Motor 11 kW, weight 9 tons. Full technical documentation DTR, work instructions BiHP in Polish. Possible training in operation and after-sales service of CNC and the whole machine.

pressure: 300 t chamfer lenght: 4100 mm distance between columns: 3550 mm Machine No.: 5083 weight of the machine ca.: 24.000 kg New controller: DNC 884sPS Domestic equipments: - CNC controlled X & R axis - CNC controlled crowning - hydraulic stamp clamping - Fiessler safety light barrier The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.

Key data: 250 t, 6050 mm

Manufacturer: EHT Werkzeugmaschinen GmbH Type: 250 - 60 Year of construction: 1998 Working length: 6050 mm Pressing force: 250 tons Oil quantity: 400 l Nominal current: 52 A Main fuse current rating: 80 A Main motor power: 22 kW Control Type: DNC 74 PSG

Hydraulic press brake prod. by Beyeler Switzerland, type PR6 100x4100, rb. 1999. CNC control Cybelec DNC 80 PS, 6 controlled axes - controlled axes Y1+Y2+X+R+Z1+Z2 +hydraulic compensation of table deflection arrow controlled from CNC. Windows, 2D graphics, color LCD screen, simulation of bending process. Pressure 100 tons, bending length 4100 mm. Between supports 3650 mm. Motor 7,5 kW, weight 11 tons. Set of bending tools of Amada + Trumpf system. Full technical documentation DTR, a workstation manual BiHP in Polish. Possible training in operation and after-sales service of CNC and the whole machine.

pressure: 175 t chamfer lenght: 4050 mm Control: DNC 1200 PS weight of the machine ca.: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 560 mm, 260 mm, 4000 1/min

MHC - Horizontal Pick-up Machine at call The MHC PickUp is a high-performance lathe with automatic tool handling for series production. It can optionally be equipped with bar feeder and with workpiece loading and unloading. The horizontal design allows turning diameters of up to 520 mm and workpiece lengths of up to 260 mm. Optionally available with Fanuc or Siemens control. The technology platform of the MHC PickUp is the Monforts tool machine DNC. The precise, reliable machining of the of the clamped workpiece by turning, drilling, milling via an overhead tool turret. In addition to bar loading, it is optional to equip with fully automatic workpiece loading and unloading. This is particularly important in the high-volume serial production offers significant time and cost advantages because manual In some cases, work steps are eliminated and throughput times ar ...

pressure: 175 t chamfer lenght: 3050 mm voltage: 3x400 V control voltage: 24 kW : 80 A frequency: 50 Hz : DNC 1200PS PressCad : 18,5 kW quantity of oil: 350 l height of the machine: 3360 mm weight of the machine ca.: 12700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 400 mm ram stroke speed: 100 mm/sec return speed: 9.0 mm/sec work speed: 90.0 mm/sec work stroke: 200 mm dayligth: 447 mm table height: 900 mm table width: 240 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 11600 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm current new price approx. 80.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP swiveling operation, front left numerical control Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) with 2x manually adjustable stop fingers (R+Z axis) Travel X = 800 mm - manual table cambering, adjustment via handwheel with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x s ...

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 2250 mm throat: 300 mm stroke: 240 mm dayligth: 640 mm quantity of oil: 250 l Control: total power requirement: kW weight of the machine ca.: 12,00 t dimensions of the machine ca.: 3,90 x 1,80 x 3,00 m • Control: Cybelec DNC 80 2D graphics • Upper tool clamping automatic • Lower tool clamping 90mm and 13mm • controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • motorized crowning • 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, H 350mm / approx. 70°, length 3060 mm, segmented The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Lot consisting of various electronic components including: . N°1 Four-port USB Hub, N°1 Aluminum Chassis for external hard disk drive, N°1 TEXAS INSTRUMENTS MSP430 debug interface unit, N°4 leatherette cases, N°1 box of electronic components including various boards and battery chargers, N°1 DNC plug/plug cable, various electronic components including resistors and capacitors, N°2 boxes of cable sheaths, N°1 box of other electronic components for wiring. 300x300x200 Approx. Onsite Dimension. (l x w x h): 1,700 x 1,100 x 740 mm, weight approx.: 10 kg

pressure: 150 t chamfer lenght: 4050 mm distance between columns: 3050 mm column arm: 350 mm dayligth: 430 mm piston stroke: 220 mm table width: 300 mm oil volume: 390 ltr. pressure: 265 bar total power requirement: 18,5 kW weight of the machine ca.: 13.000 kg range L-W-H: 4900 x 2740(1890) x 3310 mm from a maintenance workshop Furnishing: - CYBELEC CNC control, model DNC 30 - Swivel control, right front - controlled axes Y1 + Y2 + X + R - CNC motorized table crowning - hydraulic upper tool clamping - Pneumatic lower tool clamping - 2x front pneumatic bending aids - 2x free-moving 2 hand controls/foot controls - lateral protective device (protective grille) - rear protective device (protective grille) - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Bending length: 1250 mm Pressing force: 800 kN ram stroke 160 mm Hydraulic pressure: 255 bar Stop time: 110 ms Safety distance: 176 mm Input device (screen): Cybelec DNC 74 PS b Documentation available Max. pressing force: 82 to, bending length: 1,250 mm, stroke: 160 mm, weight approx.: 7,300 kg, Approx. Onsite Dimension. (l x w x h): 1,820 x 1,950 x 2,900 mm

pressure: 050 t chamfer lenght: 1600 mm distance between columns: mm stroke: 150 mm throat: 390 mm total power requirement: 5,50 kW weight of the machine ca.: 4,80 t dimensions of the machine ca.: 2,55 x 1,70 x 2,45 m • Controlled axes: X, R, Y1, Y2 • FIESSLER safety light barrier • Amada tool holder • Control: CYBELEC 2D graphics type DNC 880S • Die V12/30°, L = 16100mm • Die V8/30°, L = 1,420 mm • Offset punch R0.8/88°, H 130mm, L = 1600mm • Straight punch R0.8, H 90 mm, L = 1455 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 28 t Folding length: 1000 mm CNC Brand: Cybelec PressbrakeBOSCHERT - Profi 28 / 1000 CNC MACH-ID 8603 Make: BOSCHERT Type: Profi 28 / 1000 CNC Control: Cybelec DNC 15 Year: 2015  2 x sheet support arms front Tool clamping by hand Tooling set included Max. bending length:        1000mm Distance between column:    890mm Max. pressing force:        28T Dis. Beam - Table:          305mm Beam stroke:                200mm Approch speed:              10 mm/secmm/min. Working speed:              10 mm/secmm/min. Return speed:               30 mm/secmm/min. Adjustment X-Axis back gauge:370mm Length:          &nb ...

Adira 3100x110t hydraulic cnc press brake model QIH-11030DNC CBP Brand: Adira Model: QIH-11030DNC CBP Year: 1996 Engine power: 7.5kw Weight: 9.700kg 4-axis press brake (Y1, Y2, X, R) CYBELEC CNC: DNC 60 (Installation in 2006) Bending length: 3035mm Force: 110tn Distance between uprights: 2550mm Gooseneck: 320mm Maximum stroke: 120mm Maximum opening with intermediaries: 210mm Table width: 125mm Punch clamping: Promecam Multi-v die This model is equipped with 2 safety valves to prevent the punch from falling.

x-travel:3200 mm y-travel:2000 mm z-travel:800 mm table-size:3200 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:10 t distance between columns:1840 mm distance spindle nose and table:180~980 mm spindle drive:22/26 kW max. torque on the spindle:560/662 Nm spindle nose:50 BT spindle speed:6000 U/min rapid traverse X,Y:20000 mm/min. rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):8927 x 5217 x 4339 mm total power requirement:60 kva weight of the machine ca.:29 t positioning accuracy:0,025 (gem. VDI/DGQ3441) mm repeating accuracy:0,020 (gem. VDI/DGQ3441) mm CNC controller:FANUC 0i MF (mit AICC II, Ethernet DNC, fine mould package, machining condition selecting) gear box:BF Getriebe heat exchanger:für den Schaltschrank chip conveyor with chip bucket:2 Stk. Spirale, 1 Stk. Scharnierband CE-design:gegen Mehrpreis möglich (ve ...

pressure: 200 t chamfer lenght: 3000 mm distance between columns: 2560 mm dayligth: 450 mm throat: 450 mm adjustment of stroke: 240 mm horn length over column outer edge each: 175 mm table length: 3050 mm table width: 280 mm table height over floor: 820 mm electrics - voltage/frequency: 220/50 V/Hz control: CYBELEC, DNC60 stroke: 250 mm operating pressure: 150 bar total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC60 (in 2005), • lower part of the machine moves down 500 mm to the floor, at the moment the machine is mounted on a double-T-support, • prism and upper part of the machine in 3000 mm length The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 3050 mm distance between columns: . mm Control: Cybeleg type: DNC880S total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The newest generation of ABB robots is driven by the potent industrial robot controller known as the ABB IRC5 controller (Also known as M2004 controller). Compared to earlier ABB controllers, the mobility and application performance of the ABB IRC5 cabinet is better. When coupled with controllers from previous generations, older robots can also be controlled by the IRC5 controller. Used ABB IRC5 robots are a fantastic, incredibly affordable way to incorporate cutting-edge technology into your application. Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Dncehv

Press brake Manufacturer: Beyeler Type: RT 1600x5100 CNC Year of construction: 1986 CNC control: Cybelek DNC60 Pressure: 160 to. Bending length: 5,100 mm

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Tandem 2 x 5m. Y1, Y2, X, R,, Z1 & Z2 Second controller must be repaired. - Pressure force: 150 t - Bending length: 5.100 mm - Axes: 6 (Y1 Y2 X R) - Working speed: 200 mm/seg - Control: DNC80 - Stroke max: 250 mm - Power: installed max: 11 kW - Weight: 14.000 kg

CNC press brake Manufacturer EHT Type EHPS 20-35 Year of construction 1995 Control DNC800 Bending length 3550mm pressing pressure 200t Block matrices and segments are also available Documentation and operating instructions available Machine was overhauled 3 years ago and put aside. No longer energized.

Pneumatic cylinders, cylinders with locking unit FESTO DNCKE-40-20-PPV-A 526482 stroke: 20 mm rod diameter: Ø 16 mm p: 0.6 - 10 bar pl max: 3.8 bar New ! Dimensions: 325 x 55 x 55 mm

SAFAN Lochem Holland rb.1996 type CNCL 80-2550 hydraulic press brake. CNC-controlled synchronous machine DNCS ARA-controlled axes-Y1; Y2; X; Crow - Wila Moducrown table deflection compensation controlled from CNC. In addition, a hydraulic die for felting-flattening sheet metal type DT005, controlled from CNC. Pressure 80 t x working length 2550 mm. Between the sides 2050 mm. Weight of the machine 6 t. Drives 11 kW. A set of tools of Amada/Trumpf system for the entire length of the machine, die V=12 mm /angle 28 degrees and punch 28 degrees/h=105 mm. This makes it possible to bend and flatten a sill 6 mm wide. Full DTR documentation. Health and safety manual in Polish. The machine meets the requirements of the EU Machinery Directive(CE).

Hydraulic guillotine for sheet metal cutting by Beyeler Switzerland type VR 10-3070, 3070 mm x 10 mm (ST40). Cybelec DNC10 PS fully CNC controlled machine. The machine has a variable gap between the knives and a hydraulically variable knife angle of 1 - 2.5 degrees, set after entering the thickness and hardness of the material. 18kW motor. Machine weight 9 t. Super-fast bumpers - 1050 mm bumper departure. Electrically adjustable cutting length in the range of 10-3070 mm. 2 supports to support sheet metal at the front of the machine, plus a 90 degree cutting gauge. Light line for line cutting. Original DTR documentation and health and safety instructions in Polish. Infrared protection of the rear working area. The machine is designed for continuous operation - 3 shifts.

Hydraulic press brake: AMADA type ITS 80-25, rb: 1990, very durable model from the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm Loading: 300 mm, stroke 105 mm; Pressure: 80 t Cybelec DNC70PS CNC-controlled press, Polish language. Controlled axes -Y-X, automatic table bending compensation. Machine weight 4.5 tons. Drives 6 kW. Tools - set, Amada standard. Full Operation and Maintenance Manual, BiHP position manual in Polish.