dmu 60 used for sale

Bending tool, die, upper knife, upper tool, straight tool -Transfer in current condition as seen -Tool for: press brake -Tool: 45° -Thickness: 25 mm -Total length: 600 mm -Total height: 195 mm -Weight: 20 kg

Manual trolley, trolley, crane trolley, trolley drive, crane drive, crane trolley, trolley -Reel for: crane chassis -Drawing with the photos -Chain length: 3600 mm -Quantity: 1x reel available -Price: per piece -Dimensions: 710/250/H220 mm -Weight: 19 kg

Hydraulic clamshell bucket, hydraulic rotary grab, clamshell bucket, hydraulic grab -Bucket width: 600 mm -Shovel length closed: 1400 mm -Total height: 2200 mm

Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-3015-CT-6022 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 30.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive leg ...

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000) ? Cutting head quick-change device ? Positioning laser diode ? Automatic focus setting AutoLas Plus ? Laser power control ? Oil spray ...

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Hand wash basin, wash basin, welded-in basin, welded-in swivel basin -Stainless steel sink -Internal dimensions: 600 x 450 mm -Depth: 300 mm -Edge: 18 mm -Number: 11x available -Hole bottom left: 2/Hole bottom right: 9 -Price: per piece -Dimensions: 640/500/H300 mm -Weight: 5.1 kg

Key data: 600 , 172 , 40

Manufacturer: Arburg Type: 370 C 600 - 250 Year of production: 2004 Control: Selogica Closing type: Hydraulic Closing force: 600 kN Tie bar spacing: 370 mm x 370 mm Plate size: 570 mm x 570 mm Tool height: min 250 mm Opening distance: 500 mm Max distance between plates: 750 mm Screw: 40 mm Stroke volume: 188 ccm / 172 gram PS Injection pressure: 1390 bar General Motor: 11 kW Heating: 5,5 kW Dimensions: 4,2 m x 1,5 m x 1,7 Weight: 3400 kg Screen text: German

Fire basket, fire baskets, fire pit, fire bowl, -Around -Material: Steel -painted: Black -Number: several baskets available -Top diameter: 600 mm -Diameter at bottom: 380 mm -Dimensions: 600/H380 mm -Weight: 16 kg

Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: 994-603 -Weight: 3 kg

Combined Trumpf Trumatic 6000 TruFlow 2000 Co2 laser Preventive maintenance is carried out on the machine by Trumpf annually. installed January 2002 working hours 55734 laser on 16875 Field of work: combined exercise 2585x1280 punch press exercise 2585x1370 laser exercise 2585x1280 Performance: maximum sheet thickness 8mm punching force 220KN active blank holder (programmable) 4,5 - 20kn maximum piece weight 200kg passage height: in punching exercise 35mm in operation of laser 22mm workable materials of laser: iron maximum thickness 8mm stainless steel maximum 4mm aluminum maximum 3mm Speed': x-axis 90m/min y-axis 60m/min simultaneous 108m/min number of trips punching 900min marking 2800min c axis punching 60rpm threading 330rpm Tools: tool places 21 with three collets rotation of all tools tool change time 1.5 -5 seconds max folding height ...

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Process indicator presentation of measured values -Type: IRA-604 -Price: per piece -Number: 2x available -Weight: 0.5 kg

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Computer cabinet, server cabinet, control cabinet, network server cabinet, computer enclosure -Manufacturer: apra net -double opening -Dimensions: 600/600/H600 mm -Weight: 54 kg

Depositor Belmixing-Bowl-Lift 600 - Exhibition machine, year of construction 2022, brand new condition - Depositing range 50 - 600 ml Capacity up to 30 doses per minute Depositing range and output infinitely adjustable Machine mobile, with two locks Machine completely stainless steel Machine height pneumatically adjustable Piston rod with plastic butterfly valve for semi-liquid and flowable products with particles up to D = 25 mm Direct dosing from bowls or other containers Turn-over system for easy removal of bowls Pneumatic hand gun with hose L = 1,650 mm Vertical nozzle D = 25 mm Other accessories on request

1 of used stretch-wrapper, make Lantech, type Q 600, new 2007. Siemens S7 controls. With turntable. Capacity upto 45 loads/hour. Min load size 91.4 x 91.4 x 61 cms, max load size 137 x 122 x 233 cms. Max load weight 1.800 kgs.Dismantled and ready for shipment. Excellent condition!

ammeter -Type: VQE 96 600/5A -Price: per piece -Quantity: 3 available -Weight: 0.4 kg/piece

Vernier caliper, caliper, caliper -Caliper: Vernier caliper measuring range 0-630 mm -Nonius: 0.05 mm -Dimension: 745/190 / H10 mm -Weight: 1.3 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter, face milling head, milling head -Manufacturer: Widax-Heinlein diameter 173 mm -Type: M400 Ø160 R 12 607 -Number of teeth: 12 -Adjustment: SK50 -Dimensions: Ø 173/260 mm -Weight: 12 kg

Mounting plate, scribing plate, measuring plate, measuring table, welding table, welding table, straightening plate, scribing plate -Mounting plate: Straightening plate with base frame -Length: 600 mm -Width: 600 mm -Table thickness: 65 mm -Overall dimensions: 600/600/H815 mm -Weight: 181 kg

Echea A-II-6000 lathe. Distance between centers: 6.000mm. Swing: 820mm. Swing in carriage: 600mm. Swing in gap: 1.140mm. Bed widht: 510mm. Spindle: 82mm. Speeds: 12. (12-850rpm). Motor power: 25cv. Max. weight with 1 steady rest: 7.700Kg. Equipped with chuck and 2 steady rest. Weight: 9.600Kg.

4000 x 2000mm 6000w with auto pallet changer

Keyboard, control panel, industrial, PLC workstation, programming device -Manufacturer: Siemens, programming device Simatic PG 605 with case -Type: Simatic PG 605U 6ES5 605-0UA12 -Dimensions case: 390/300/H90 mm -Total weight: 1.7 kg

Safety cabinet, dangerous goods cabinet, safety cabinets, tool cabinet, steel cabinet, workshop cabinet, electronics cabinet, battery cabinet -Battery cabinet: 4 shelves, with smoke detector -Width: 600mm -Depth: 800mm -Height: 1800mm -Transport weight: 170 kg

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

-Stainless steel tin trolley for Miwe Rollin 60x60 rotary oven -with 18 editions -optionally with sheets

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 1400 mm - Width : 3100 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

High-speed high-temperature system with adjustable heat holder The machine can be started in a closed system or via supply tanks with pump control. Control via Siemens S7

Skin pass machine Biscuit machine Krumbein DSM 600 LIV - Skin pass machine Dropin - 600cm bandwidth - Year of construction 2005 - mobile on wheels

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

Shell end milling cutters, shell milling cutters, milling cutters, shell milling cutters -Shell milling cutters: with longitudinal groove -Type: HSS 60x30x27 H -Intake: with fitting groove -Cutting material: HSS -Dimension: Ø 60 x 30 x 27 mm -Weight: 0.4 kg

Conveyor belt, Gurtförderband, Förderband rubber, Gummiförderband -Conveyor belt: Conveyor belt -Width: 600 mm -Length: 6520 mm -Transport dimensions: 680/330/H300 mm -Weight: 9 kg

Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate, mesh size: Ø 2mm, material: stainless steel -Dimensions: 700/50/H533 mm -Weight: 163 kg

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x chipboard second choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 7,500 mm Number of fields per row of shelves: 03 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 04x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 12x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 06x chipboard II choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Su ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet racking trusses, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 08x locking pins, used Execution: compl. galvanized For securing the longit ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 9,975 mm Number of fields per row of shelves: 04 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 05x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 16x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 32x locking pins, used Execution: compl. galvanized For securing the longitud ...

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, steel locker, clothes locker -Steel locker: double-winged, compartment width 30 cm -Width: 600mm -Depth: 500mm -Height: 1820mm -Doors: lockable, without lock -Number: 2x locker available (1x with 2 shelves) -Price per piece -Weight: 40kg / 42kg

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 5,025 mm Number of fields per row of shelves: 02 pcs. á 2,400 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 03x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 16x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse Agraffe: 5 HK (hook) clear width: 2,400 mm 08x chipboard second choice, used Thickness: 22 mm  ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 08x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse Agraffe: 5 HK (hook) clear width: 2,400 mm 04x chipboard II choice, used Thickness: 22 mm Dim ...

Workbench, work table, assembly bench -Workbench: with drawers, solid construction -Width: 1250mm -Depth: 600mm -Height: 775mm -Drawers: 3, lockable / without lock -Weight: 75 kg

Height gauge, parallel gauge, height gauge -Manufacturer: Mitutoyo, height gauge type 192-104 -Max. Working height: 600 mm -Dial indicator: measuring accuracy 0.01 mm -Analog display: double counter -Dimensions: 275/120/H795 mm -Weight: 8.7 kg

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Transport roller: Diameter 320 mm -Transport width: 605 mm -Shaft: Mountings Ø40 x 110 mm -Quantity: 1x transport roller available -Dimensions: Ø 320 x 795 mm -Weight: 68 kg

Workbench, work table, assembly bench -Workbench: with drawer, massive execution -Width: 1200mm -Depth: 600mm -Height: 790mm -Closet door: lockable / without lock -Weight: 40 kg

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

Power pack, power converter, power supply, switching power pack, DIN rail power pack -Manufacturer: ifm, power pack N 600 type NZ 33-1 unused original packaging -Order No.: DN 0001 -Voltage: 24VDC 100mA -Dimensions cardboard: 160/120/H70 mm -Weight: 0.5 kg