dmu 50 used for sale

PTC JTR-H Hot water 140°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only with version 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO, ... - Single-axis attachment on hot-dip galvanized frame with stub-foot with wheel, parking brake, automatic return gear, stand-up, back lights and reflectors, zugoese for 50 mm clutch, 13" tyres and ABS. The following hot water models are available: JTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW 702 12.6kW JTR-H 23/350 | 23l/min. at 350bar | Engine: Kohler KDW 1404 26kW JTR-H 20/500 | 20l/min. at 500bar | Engine: Kohler KDW 1404 26kW JTR-H 30/500 | 30l/min. at 500bar | Engine: Kohler KDW 2204 37.5kW - Dimensions: 3,370 x 1,640 x 1,540 Cxombmv - Empty weight: approx. 650 kg - High pressure pump: Comet RW/TW Premium - HD reel: manually with max. 1/2" or 100 m. 3/8" hose (included) - Water supply ree ...

Siebler + Göring 5000/160E vertical four side seal strip packer for effervescent tablets, maximum foil width 160mm, currently fitted with handling and format parts for 20mm diameter tablets. Output up to maximum 150 strokes per minute. Includes a duplex module of ABB Flex-Picker robots for automatically loading an existing cartoning machine infeed (cartoner not included)

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used ; ready for use

VACFOX VC 500 (formerly CLF501 of Elmo Rietschle) Rotary vane vacuum pumps DS-motor 11 kW 970 RPM 400/690 V +-10% 50 Hz Insulation class F protection IP 54 oil-ueberflutet - air cooled Pumping speed of 550 m3/h The vacuum pump is available and can be viewed like in Meersburg, Baden-Württemberg.

High pressure cleaner PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Foerder quantity: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31hp/23kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with maintenance-friendly filter cartridge - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet  ...

Used mill Alpine 500.

Built in 1997 Pile height 400 mm section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Speed max 60.000 Ex./h Weight 980 kg (approx.) ; working condition

Upright stack delivery with pressing unit; working condition

Newtec Model: 5000C checkweigher roller conveyor serial: 1491 weighbed 350mm x 330mm, with roller outfeed conveyor, weight ranges from

Zentrifuge Cepa Padberg GZ 500, BJ. 1994,approx. 100 kg per batch, 750 rpm Next: CEPA Padberg GZ 500 E, BJ 1994, with 125 kg swivel crane VETTER See pictures below

Manufacturer: MicroStep Type: SPL-PA 3001.15+S500 Working range: 3000 x 1500 mm + 500 mm shaft technology: plasma built in 2006 Kjellberg HiFocus 160i with autom. Gas console; (see PDF) 2 x additional quick-release co-buttons PerCut 170 Div. Wear parts Donaldson filter system including disassembly and delivery within Germany. Commissioning on request.

Vacuum pump Manufacturer: Kinney Type: KT-505 LP Status: used; ready for operation

Bolt feeders Manufacturer: Tucker Type: BV 50D.00.44/5.18F8 and BV 50D.10.01/5(12-25) There are 2 pieces. The price is for 1 PCs.

Good day have with this machine a top TECA print up to 4 colours! Carrée and pad cleaning! Absolute Professional machine. If you have questions just email!

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 500 A Suction capacity: approx. 500 m ³/h Cat. No.: PP W31 001 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Styrofoam shredder, shredder for polystyrene Styro-Cut 500 Technical specifications of the Styro-Cut 500 Dimensions (DxWxH): 920 x 1130 x 1640 mm Electric motor: 11 kW/2900 min – 1, 380 V Insertion opening: Ø 420 mm Weight: approx. 300 kg Throughput capacity: up to approx. 25 m3/h depending on sieve size and material Granule size: with standard sieve 9 mm. Production of granules up to 6 mm possible Styro-Cut 500 as an independent unit for manual shredding of the polystyrene Styro-Cut 500 can be used as part of a production line for crushing polystyrene. DS-50 is used as a coarse shredder, which is equipped with the help of a conveyor belt. The material is then conveyed to the Syro-Cut 500 shredder and finely shredded. Uses: – Companies that recycle the waste styrofoam – Construction industry that uses polystyrene as heat and sound insulation – Shops that  ...

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

Wheel diameter: 500 mm Cutting height: 330 mm cutting width: 480 mm Motor output: 1,5 kW Table dimensions: 495 x 670 mm Table tiltable: 45 Grad The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new

machine measurements: 1800 x 2300 x 2300 mm machine weight: 1800 kg power capacity: -- kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

angle steel/side length: unbkt mm double T-iron on the x-axis: unbkt mm U-iron on the x-axis: unbkt. mm total power requirement: 90 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 6500x5300x3750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DYNABOX 500 - 230V 50Hz DYNAJETten with system: the powerful hot water unit Dynabox 500 with up to 500 bar working pressure is the ideal addition to all DYNAJET trolleys. Simply on the Connect the high-pressure side between the high-pressure cleaner and the cleaning tool and already achieve results with up to a maximum of 95 °C hot high-pressure water that can be achieved with conventional Cold water cannot be reached. Of course, the Dynabox 500 is also characterized by its low weight, small dimensions and easy loading and Transportation options. BASELINE System hot water generators Type Trolley/Box Pressure class 500 bar Pressure adjustable No Pressure minimum 40 bar HYDRAULICS Minimum flow rate 7 l/min Maximum flow rate 15 l/min THREADED CONNECTION Input connection M24x1,5 AG Output connector M24x1,5 AG DRIVE Voltage and frequency 230 Volt AC 50Hz Volume  ...

With PRO 500 concrete products machines we provide excellent medium-level entry solution, and also long term solution for many customers. These machines combine durable, heavy-duty construction with the possibility for assembly various concrete product lines - from simple to fully automatized. Production of high-quality concrete products is offered with PRO series of machines: concrete paving stones, hollow blocks, solid blocks, insulated blocks, curbstones, gardening blocks, etc... PRO 500: • Production board size: 1400x700 mm • Production area: 1300x650 mm • Production height: 25 - 300 mm

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

Technical data: -Welding current 505 A 35% ED 433 A 60% ED 385 A 100% ED -Welding current 6 coarse steps + 6 fine levels adjustable - welding current adjustable from 40 A / 16 V to 505 A / 39.3 V - digital amp + voltmeter -separate stroke of wire feed case - 4 roll wire feed Steplessly adjustable - 2 + 4 stroke â regulation -E - welding equipment - hose water cooled approximately 6 YDS -Ground cable -Pressure reducer -Intermediate package machine - wire feed speed approx. 8 m - connection 400 V / 50 Hz 50 A -Space requirement approx. B 520 x H 1400 X 1000 mm -Weight approx. 170 kg

DYNAJET 500th HELI with approx. 4,250 operating hours, price 22.000€ (net) The mobile and universally applicable dynaJET 500th cold and hot water high-pressure cleaner with up to 500 bar working pressure is characterized not only by its user-friendliness but also by its low weight, compact dimensions and high performance and safety level. CONSTRUCTION • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Self-supporting and indestructible framework for weight optimization • Crane eyelet for easy transport and handling • Underrun protection for additional safety • Frame in dip painting technology for high corrosion protection and highest surface quality • Targa concept with separation between the unit side and the operating side for enormous advantages in ergonomics, overall machine safety and noise reduction • Impact-resistant plastic hood for mi ...

Type 500 Motor power 3 kW, 1450 rpm Blade length 4100 mm Blade width 19~38 mm Blade speed 18 m/s Throat / max. cutting width 500 mm Max cutting height 350 mm Table dimentions 730 x 480 mm Tilting table 0°~ 45° Dust port diameter 2 x 100mm

S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...

Maximum cutting length: 4000 mm Maximum sheet thickness: 4 mm steel Driven back gauge to 1000 mm Page fence and table extensions Cutting length limit Cutting edge lighting Protection fence, roll with safety switches Weight: 8500 kg

Marine gear box MG 509 USED Ratio 4.17:1 and more ratio's in stock