dmu 50 used for sale

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

BAZ DMU 60E BJ 1998 3 axle

WE OFFER AN NICE CONDITION DMU 70 EVO MACHINE IS ON POWER WORKING DAILY ORDERS IN SHORT WE PROVIDE VIDEO OF WORKING

Milk E-Heating System PHE, Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump., Make: DMUK, Capacity: 1000-1000 L/h, Temperatures: Regulated by the controls, Circulation Pump: Included, Control Panel: Included, VDF: Included, Condition: Excellent

Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters

Number of tool positions: 30 Spindle power: 14 kW Spindle speed: 14,000 [rpm] A-axis travel: 360 [°] (+/-) Indexing accuracy: 0.001 [°] Stroke: -10 / +95 [°] Indexing accuracy: 0.001 [°] Tool Changer Type : Loader Arm Table load capacity : 350 [kg] Auction-ID: A7-32339-12

According to photos, weight estimated. Tools included in the stacks 2 inverters are defective Auction-ID: A1-45666-18

- Tool changer: 16-speed - Chip tray available and chip conveyor purchased at a later date Auction-ID: A1-46607-1

Rotary table diameter: 700 mm Table surface: 1250 x 700 mm B-axis: +30 / -120 C-axis: 360 Tool changer: 32 times 2019: X/Y/Z guides and KGT renewed Auction-ID: A1-46607-120

ul> CNC control: Heidenhain TNC 530 5-axis (B-axis head ±90°, C-axis table 360°) Strokes: X = 1060 mm, Y = 710 mm, Z = 710 mm Spindle speed: 20 – 12,000 rpm Spindle power: 15 kW Cone: ISO40 Fast feeds: 30 m/min Table: 1500 x 795 mm Max table load: 900 kg Tool magazine: 32 positions Spindle centre coolant + refrigeration unit + mist suction Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-207

CNC control: Heidenhain TNC 530 Machine 5 simultaneous axes Strokes: X = 730 mm, Y = 560 mm, Z = 560 mm Spindle speed: up to 12,000 rpm Cone: SK40 Feeds: 20 – 20,000 mm/min Fast feeds: 30 m/min Table: 1000 x 600 mm Max load table: 800 kg Tool changer: 24 / 30 positions Machine hours≈ 31,481 h Spindle hours≈ 25,087 h Lots sold as is, unchecked, without tools or tool holders. Auction-ID: A1-46647-203

Key data: 630 mm, 560 mm, 560 mm

Machine Details Stock-No. 1105-04038 Type of machine Universal Milling Machine Make DECKEL-MAHO Type DMU 60 MONOBLOCK Year of manufacture 2008 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details X-Travel 630 mm Y-Travel 560 mm Additional information CNC Univ. Tool Milling Machine DECKEL MAHO Model DMU 60 MONOBLOCK YEAR OF MANUFACTURE 2008 5 AXIS SIMULTAN CNC Universal Tool Room Milling Machine DECKEL MAHO type DMU 60 MONOBLOCK BUILT IN 2008 With CNC control Heidenhain TNC 530, 32-fold tool changer, ROUND TABLE 360000 ° , Cabin With CNC control Heidenhain TNC 530 , 33-fold automatic tool changer, , cabinl Technische Daten / technical details: Longitudinal travel X / X-travel longitudinal 730 mm Cross travel Y / Y-travel cross 560 mm Vertical travel Z / Z-travel vertica ...

Machine details Bearing number 1105-03199 Machine type Milling machine - Universal Make DECKEL MAHO DMG Type DMU 70eVolution Built in 2001 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time by arrangement Freight base from location Price Technical details x-path 750 mm y-path 600 mm z-way 520 mm Control HEIDENHAIN iTNC 530 Information Milling machine - Universal DECKEL MAHO DMG DMU 70eVolution NC Swivel Round Table (700X500) Spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 Tool changer -------------------- Magazine places: 32 Pick up Facilities -------------------- Measuring probe Conveyor 2. Processor card electronic handwheel HR410 Blowing air M25 Rinsing gun

Key data: 400 mm, 400 mm, 375 mm

Machine Details Stock-No. 1105-03922 Type of machine Machining Center - Universal Make DMG DECKEL MAHO Type DMU 40 EVO Year of manufacture 2013 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 400 mm Y-Travel 400 mm Z-Travel 375 mm control iTNC 530 Heidenhain Turning speed range - Main spindle max. 20,000 min/-1 power capacity - main spindle 19 kW max. torque 130 Nm tool taper SK 40 swivellable -105+ 40 ° table surface area Ø 450 mm T-slots 7x 14 x 63 mm max. table load approx. 275 kg rotatable C: 360° Max. workpiece diameter 500 mm max. workpiece height 400 mm number of toolpositions 60 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip to chip a ...

Deckel Maho Universal Machining Center CNC DMU 70 VL Deckel Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Typ [ type]: DMU 70 VL [control unit]: Heidenhain TNC 430C Jahr [construction year]: 2002 Travel range [travel path]: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ internal coolant supply Tool changer: 2 x 32 places Tool holder: SK 40 to DIN2080 Cooling system: Knoll Chip conveyor: 2 units/units Weight [weight]: 12.800kg Dimensions [needed space]approx. (L x W x H): 5.3m x 2.75m x 2.75m Technical documentation/documents available in detail

Key data: 800 mm, 650 mm, 550 mm

Machine Details Stock-No. 1105-04022 Type of machine Machining Center - Universal Make DMG LID MAHO Type DMU 80 eVolution LINEAR Year of manufacture 2012 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 800 mm Y-Travel 650 mm Z-Travel 550 mm control iTNC 530 Heidenhain distance spindle nose and table 150 - 700 mm Turning Speed Range - Main Spindle max. 18,000 min/-1 Power capacity - main spindle 35 / 25 kW max. torque 130 Nm tool taper HSK table surface area 800 x 700 mm max. table load 600 kg rotatable C: 360° Swivel range B: -5 / -110 ° number of toolpositions 120 pos. tool taper HSK 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8.0 kg Change-time chip-to-chip approx. 5.9 sec F ...

This 5-axis DECKEL MAHO DMU 80P hi-dyn was manufactured in 2005. It features impressive travels of 800 mm in X, 700 mm in Y, and 600 mm in Z. The machine is equipped with a Heidenhain iTNC 530 control and a maximum spindle speed of 6,300 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 80P hi-dyn universal machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 75 MonoBlock was manufactured in 2015. It features an X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a spindle speed of 20,000 rpm and a tool magazine with 60 positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 MonoBlock universal machining centre we have for sale. Contact us for further details.

Key data: 750 mm, 600 mm, 520 mm

Machine Details Stock-No. 1105-04037 Type of machine Universal Milling Machine Make LID MAHO DMG Type DMU 70eVolution Year of manufacture 2002 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time according to the arrangement Freight basis ex Works Price 45000 EUROS Technical details X-Travel 750 mm Y-Travel 600 mm Z-Travel 520 mm Control HEIDENHAIN iTNC 530 Additional information Milling Machine - Universal DECKEL MAHO DMG DMU 70eVolution NC swiveling rotary table (700x500) Spindle -------------------- Spindle speed: 18,000rpm Tool holder: SK40 Tool Changer -------------------- Magazine places: 32 Pick up domestic equipments -------------------- sample Chip Conveyor 2nd processor card electronic handwheel HR410 INTERFACE FOR EROWA WITH EROWA ROBOTS RENISHAW SAMPLE Flushing gun

DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...

This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information.

This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information.

This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine.

This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information.

This 5-axis DECKEL MAHO DMU 50V was manufactured in 1996. It features a Millplus control system with software version DV400, an external hydraulic unit for clamping devices, and a Hainbuch hydraulic vise for BZI32 collet. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 50V machine we have for sale. Contact us for more information about this machine.

This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine.

This 3-axis DECKEL MAHO DMU 60 E vertical machining center was manufactured in 1999. It features a chip conveyor and travels of 600 mm in the X-axis, 525 mm in the Y-axis, and 500 mm in the Z-axis. Ideal for those looking to buy this DECKEL MAHO DMU 60 E vertical machining center. Contact us for further details regarding this vertical machining center.

This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine.

This 5-axis DECKEL MAHO DMU 50 T was manufactured in 2000, featuring a Heidenhain TNC 430 M control system and a manual swivel rotary table for versatile 5-axis machining. It has a spindle speed up to 8,000 rpm, tool holder SK 40, and rapid traverse rates of 12 m/min in X/Y/Z. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 50 T machine we have for sale. Contact us for more information.

This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,040 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining centre we have for sale. Contact us for further details.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerTool changer planevertical Type of gripperDouble gripper Number of tools30 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 9Distance between T-Slots 63 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degreeDirect measuring systemDirect path measurin ...

This 5-axis DMG MORI DMU 60 Monoblock was manufactured in 2016. It features an X-axis travel of 730 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful motor spindle capable of reaching speeds up to 18,000 rpm and includes a 24-pocket tool changer. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 Monoblock vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 80T was manufactured in 2004. It features impressive travels of approximately 980 mm in the X-axis and 630 mm in both Y and Z axes. The machine includes a 4-position tool changer and operates with TNC 5.0 control. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 80T vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG DECKEL MAHO DMU 80P duoBLOCK was manufactured in 2009. It features impressive axis travels with X-axis at 800 mm, Y-axis at 1050 mm, and Z-axis at 850 mm. The machine includes a robust table size of Ø 900 × 700 mm and a maximum workpiece weight capacity of 1800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 80P duoBLOCK vertical machining centre we have for sale. Contact us for further details.

This 3-axis DECKEL DMU 60 E was manufactured in 1998. It features a spindle speed of 12,000 rpm and an impressive X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine includes a fixed angle table with a clamping surface of 1000 x 542 mm and a 25-position double gripper tool changer. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 60 E vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 75 Monoblock was manufactured in 2015. It features an impressive X-axis travel of 750 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a maximum spindle speed of 18,000 rpm and offers 60 tool positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 Monoblock universal machining centre we have for sale. Contact us for further details.

This 5-axis DECKEL MAHO DMU 80 MonoBLOCK vertical machining center was manufactured in 2005. It features a 16,000 rpm spindle speed, a 40-slot tool changer, and an SK 40 tool holder. Equipped with an NC rotary table, a controlled B-axis in the milling head, and a chip conveyor, this machine is ideal for complex machining tasks. The DECKEL MAHO DMU 80 MonoBLOCK we have for sale is a robust choice for precision engineering. Contact us for more information.

This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. Its well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine.

This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details.

Semi - Automatic Butter Extruder and Shaping Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Manufacture : Dairy Machinery UK Model : DMUK EXSH1 Usage : Butter Extruding and Shaping Machine Shapes : Various Shapes and Sizes Condition : New Warranty : 12 months Spare Parts : Dairy Machinery UK

5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm

Key data: 500 , 520 , 380

Bearing number 1105-02750 Machine Type Machining Center - Universal Make DMG DECKEL-MAHO Type DMU 50 eV / 5 axes Built in 2001 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-way 500 mm y-way 420 mm z-way 380 mm Control HEIDENHAIN TNC 430 Spindle cone SK 40 Speeds 18,000 rpm Spindle motor 15 kW Rapid speed 50 m/min Table clamping area 500 per m. x 380 mm Feed range up to 20 000 mm/min Tool change device 32 fold Total power requirement 38 kVA Machine weight approx. 5.9 t Information - CNC - CONTROL of the display of HEIDENHAIN TNC 430 - 5-axis machine with B + C axis - Spindle on: 22 800 h - Current on: 38 000 h - Machine documents spaenefoerderer

Fully functional used CNC milling machine Deckel Maho DMU 60 with rotary table Built in 1999 Heidenhain Control We would like to point out that this machine is in excellent technical and well-maintained condition for its age (due to the IATF certification). Regular maintenance is already required on the basis of the certification and the machine therefore works 100% perfectly. The machine is still energized and can be viewed and tested at any time. All maintenance logs are in place. The machine will have to leave the hall in the first quarter of 2025. This means that the machine could remain energized until mid-March 2025 to demonstrate it under power. Of course, the machine would also be available immediately. We will be happy to answer any questions you may have at any time. We are looking forward to a good cooperation and thank you for your answer and interest in adv ...

Machine details Bearing number 1105-02750 Machine type Machining center - Universal Made DMG DECKEL-MAHO Type DMU 50 eV / 5 axes Built in 1998 Control type CNC Warehouse FRANCE Country of origin Germany Delivery time immediately Freight base EX WORK Technical details x-path 500 mm y-path 420 mm z-way 380 mm Control HEIDENHAIN TNC 430 Spindle cone HSK 63 Speeds 18,000 rpm Spindle motor 15 kW Rapid response 50 m/min Table clamping area 500 throughs. x 380 mm Feed range up to 20 000 mm/min Tool change device 32 fold Total power requirement 38 kVA Machine weight approx. 5.9 t Information - CNC - Screen web control HEIDENHAIN TNC 430 5-axis machine with B +C axis SIMULTAN - Machine documents spaenefoerderer

DECKEL MAHO DMU 100 T YEAR OF CONSTRUCTION: 2001 - Number of axes: 5 ( simultaneous) milling spindle - Tool holder: SK40 - Spindle drive power: 15 [kW] - Spindle speed: 20 - 12,000 [up] LINEAR ACHSEN - Travel X/Y/Z axes: 1,060 x 710 x 710 [mm] - Rapid speed (X/Y/Z) : 30,000 [mm/min] - Feed speed (X/Y/Z) : 20 - 15,000 [mm/min] SCHWENKACHSE A : SCHWENKKOPF - Travel: 90 [degrees](+/-) - Minimum resolution: 0.001 [degree] SCHWENKACHSE B : NC ROUND TABLE x 800 [mm] - Travel: 360 [degrees](+/-) - Minimum resolution: 0.001 [degree] WERKZEUGWECHSLER - Number of tools in the magazine: 32 ( 2x 16 places) table - Table size: 1500 x 795 [mm] - Loading table max. : 500 [kg]

Machine Details Stock-No. 1105-03325 Type of machine Machining Center - Universal Make DMG Type DMU 70 V Year of manufacture (2000) Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 750 mm y-travel 600 mm z-travel 520 mm table-size ø 700 x 500 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12,000 rpm feeds longditudinal/cross/vertical 20,000 mm/min rapid traverse 50 m/min ATC 24x workpiece length 315 mm weight of tools max. 6 kg table load max. 0.35 t weight of the machine approx. 7 t Additional information , chip conveyor CNC CONTROL HEIDENHAIN I TNC 430 12000 RPM SK 40

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgDie and Mold Package linearDie and Mold Package linear Dynamic package V-type Eagle timing belt for Z axisPackage Mill / TurnPackage Mill / Turn (only available for Siemens 840D solutionline) NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C ...