133,927 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition, testing is possible by prior arrangement.
Key data: 800 mm, 800 mm, 800 mm
3D path control Heidenhain iTNC 530, main drive 19 KW (100% ED), 28 KW (40% ED), Tool holder SK 40, chain magazine with 60 places, chip conveyor, rotating viewing disc, Coolant tank with 600 liters, IKZ with 40 bar, switchable to blowing air, universal milling head B-axis, NC rotary table 900mm x 700 mm, infrared touch probe Heidenhain TS 641, electronic handwheel, Operating mode 4, documentation with repair work available. Spindle hours Total 13,700 of which 680 hours on new spindle replaced 27.02.2024
A CNC 4-axis universal milling machine DMG DMU 80 T is available. Travel X/Y/Z: 880mm/630mm/630mm, spindle speed: 12000rpm, spindle power: 15kW/10kW, tool holder: SK40, tool magazine: 32, table dimensions X/Y: 1250mm/700mm, max. table load: 600kg, infrared probe: Heidenhain TS 631. Machine dimensions X/Y/Z: approx. 7600mm/3350mm/2750mm, weight: approx. 8800kg, control: Heidenhain TNC 430. Including automation extension Promot. Documentation available. An on-site inspection is possible.
x-travel: 980 mm y-travel: 630 mm z-travel: 630 mm Control: iTNC 530 total power requirement: 10 / 15 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 442,5 m Equipment: Electronic handwheel Operating mode 4 Manual swivel milling head Motor spindle 12,000 rpm SK 40 / Clamping DIN 69872 32-position tool magazine Rigid table 1250 x 700 mm Chip conveyor Coolant device Special price for collection ex works / EXW foundation EXW D-63110 Rodgau List price ex warehouse The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The machine is in good technical condition, testing is possible by prior arrangement. X=750, Y=650, Z=550, rotary table r=650 Rpm 20k, iTNC 640 system, only 26,500 hours on the spindle, 60 slots
Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rate ...
x-travel: 600 mm y-travel: 525 mm z-travel: 500 mm table surface area: 1000 x 543 mm spindle taper: SK 40 spindle taper: DIN 69871 spindle turning speed - stepless: 20 - 12.000 U/min feed X/Y/Z-axis: 20 - 10.000 mm/min rapid traverse X/Y/Z axis: 18 / 18 / 15 m/min table load: max. 350 kg control: HEIDENHAIN MillPlus milling-head swivable +/-: 90 ° total power requirement: 26 kVA weight of the machine ca.: 4,2 t dimensions of machine L x W x H: 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
DECKEL MAHO DMU 60 monoBLOCK 5-axis machining center GENERAL Project No.: 905799 Quantity: 1 pcs. Manufacturer: DECKEL MAHO Type: DMU 60 monoBLOCK Control: Heidenhain Millplus iT Year of Make: 2008 Condition: Used machine Approx (hrs): 38596 Spindle in approx. (hrs): 200 Program run approx. (hrs.): 16181 DESCRIPTION MILL 5 axes Travel in X 730 mm Travel in Y 560 mm Travel in Z 560 mm Max. rapid traverse speed in X/Y/Z 30/30/30 m/min Tool holder HSK 63 Max. speed milling spindle 18000 1/min Milling head NC-controlled swivel -120/+30 degrees Chain tool magazine 60 stations Machine table 1000x600 mm Rotary table NC-controlled Diameter of rotary table 600 mm OTHER EQUIPMENT IR Workpiece Probes Splash protection cladding with partially clad work area Rotating viewing window Lighting in the work area Preparation for central oil/emulsion mist ...
GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / ...
Machining center Deckel Maho DMU200P - Very good condition - Available Immediately - Worldwide Export Year of Make: 2003 Condition very good Stock number 0732 Control Heidenhain iTNC530 Clamping area 1,700 mm x 1,400 mm Spindle speed 12,000 rpm Spindle holder SK50 Tool magazine 60 places Internal coolant supply (IKZ) and chip removal package 40 bar Conveyor. Probe Heidenhain TS642 electr. Handwheel Heidenhain Operating mode 4 High-speed attachment spindle 42,000 rpm Tool Measurement Blum Laser
A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.
Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.
This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information.
This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine.
This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information.
Fabricante DMG Modelo DMU 125 P hy-dyn Año 2001 CNC HEIDENHAIN TNC 430D Mesa Dimensiones de la mesa 1.250 x 1.000 mm. Peso máximo permitido sobre mesa 2.000 kg. Recorridos y avances Cursos longitudinal, transversal y vertical (Ejes X/Y/Z) 1.250/880/800 mm. Rotación de mesa (Eje C) 0,001 º (Continuo) Avance rápido de los Ejes 30.000 mm/min Cabezal Tipo Automático Horizontal / Vertical Posicionamiento cabezal (Eje A) 0,001 º (Continuo) Cono husillo SK-40 DIN 69871 Gama de revoluciones 20-18.000 rpm Potencia motor principal 37 kW Equipamiento Cargador automático de herramientas INCLUIDO N.º de herramientas del cargador 30 Refrigeración interna 40 bar INCLUIDO Reglas Ópticas HEIDENHAIN INCLUIDO Transportador de Viruta INCLUIDO Volante Portátil HEIDENHAIN HR-410 INCLUIDO Otros Peso Neto 13.000 kg.
This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine.
This 3-axis DECKEL MAHO DMU 60 E vertical machining center was manufactured in 1999. It features a chip conveyor and travels of 600 mm in the X-axis, 525 mm in the Y-axis, and 500 mm in the Z-axis. Ideal for those looking to buy this DECKEL MAHO DMU 60 E vertical machining center. Contact us for further details regarding this vertical machining center.
This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine.
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Travel X/Y/Z: approx. 600mm/525mm/500mm, table dimensions X/Y: 1000mm/550mm, max. table load: 350kg, tool holder: SK40, speed: 12000rpm, tool positions: 25, rapid traverse: 24m/min. Machine dimensions X/Y/Z: approx. 2900mm/2000mm/2300mm, weight: approx. 4500kg, control: Heidenhain, operating hours: approx. 87955h, spindle hours: approx. 21800h. Documentation available. On site inspection is possible.
Key data: 800 mm, 650 mm, 550 mm
Universal Machining Center Deckel Maho DMU 80T Year 2000 Control: Heidenhain Running hours: ~ 1,600h Technical data: Spindle speed: 0 - 6,300 min-1 Torque Spindle: Tool holder: SK 40 Number of magazine slots: 24 X-axis: 800mm Y-axis: 650mm Z-axis: 550mm Accessories: - Coolant system - 30 SK 40 tool holders - 1x Machine Vise Machine is in very good condition. Has been used only a little
The machine is in good technical condition, testing is possible after prior agreement. The tool magazine does not work, manual shifting is necessary, otherwise problem-free operation
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 40 eVo linear With Siemens 840 D sl Operate path control Year of Make: 2016 Travel: X 400 Y 400 Z 375 Speed range: 20 – 20,000 rpm infinitely variable With the following accessories: NC swivel rotary table 450 mm x 400 mm incl. table cooling 60-fold tool changer with double gripper ( HSK 63 ) 3 D Probe Heidenhain Electronic handwheel IKZ 40 bar with paper belt filter Scraper Chip Conveyor Bed Wash Active cooler for control cabinet Spindle Cooling: Water Circulation Cooling Rotoclear Direct displacement measuring system Blowing air d.d. spindle center 3-Piece Height Adjustable Machine Shoes Operating Instructions
used
Table: 450 x 500 mm 60 Way Tool Changer IKZ Breakage control lasers 5 axes Further technical information on request
This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 600 Z 700 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Swivel rotary table 0 630 mm Swivel milling head ( Horizontal + Vertical ) Universal tool changer with 60 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting 50 pcs SK 40 tool holders IKZ – 40 bar Chip conveyor Rotoclear 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Operating Instructions THE MACHINE COMES FROM AN INSTITUTE AND IS IN TOP CONDITION POWER-ON HOURS: 29496 hrs PROGRAM HOURS: 10050 hrs.
Travel X/Y/Z: 600mm/400mm/500mm, Speed: 8000rpm, Tool holder: SK40, Feed rate: 10m/min, Rapid traverse: 20m/min, Table dimensions X/Y: 1000mm/600mm, max. table load: 500kg. Machine dimensions X/Y/Z: approx. 3560mm/2700mm/2250mm, Weight: approx. 6500kg, Operating hours: approx. 66000h, Spindle hours: approx. 18000h. Including approx. 30 SK40 holders and 2x Allmatic hydraulic vices. Documentation available. An inspection on site is possible. Without IKZ and tool changer.
x-travel: 600 mm y-travel: 500 mm z-travel: 500 mm total power requirement: --- kW weight of the machine ca.: 9,6 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1.150 mm y-travel: 710 mm z-travel: 710 mm b-axis: +30 / -120 ° surface area: 1.500 x 795 mm milling head: universal, stufenlos spindle: 28 kW turning speeds: 20 - 18.000 U/min tool changer: auto. number of tools: 60 Control: HEIDENHAIN iTNC530 weight of the machine ca.: 12 t dimensions of the machine ca.: 6 x 3,2 x 3,4 m CNC universal milling machine in a very stable ‘monoBLOCK’ design, ideal for single-part and small-batch production with swivel spindle, NC dividing head and tool magazine. • NC-swivel milling head hydraulically clampable, with HSK-A63 spindle taper and 18,000 rpm motor spindle • LEHMANN vertical NC dividing head mounted on the machine table for 5-axis simultaneous machining with tailstock • DMG ERGOline® Control with 19 screen and HEIDENHAIN iTNC530 3D contouring control • Production package with RotoClear viewing window, 600-litre coolant tank, ...
x-travel: 1135 mm y-travel: 1050 mm z-travel: 710 mm 0: dia 1240 x 690 mm control: Heidenhain TNC 640 : : 15000 min/-1 : 35 kW tool taper: SK 40 work table:: table surface area: 1050 x 860 mm max. table load: 2000 kg : : 30 pos. tool taper: SK 40 change-time chip to chip: 6 sec feeds:: : 40 m/min feed speeds: 40000 mm/min total power requirement: - kW weight of the machine ca.: 18 t dimensions of the machine ca.: 5,1 x 3,99 x 3,4 m 5-Axis Machine equipped with: - CNC Control Heidenhain TNC 640 - universal Milling Head (B-Axis +30/-130°) - NC- rotary Table dia 800mm (C-Axis) - BMF coolant and filtration system. - electr. Handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 800 mm, 650 , 650
We have various spare parts in stock for the following machine. Please inquire! DMU 80E Built in 1999 Spindle Hours 35000 Heidenhain LE 426M Travels X/Y/Z axis 800/650/550 mm Tool changer with double gripper for 24 tools Tool holder ISO 40 Spindle speed 20-12000 rpm Feed speed 20-10000 mm/min Rapid traverse 15 m/min Spindle motor 15 kW Table size 1100 x 650 mm Weight approx. 6500 kg Dimensions: 3400x2400x2800 mm Accessories: Coolant device, el. Handwheel HR410
travel -x axis: 880 mm travel -y axis: 630 mm travel -z axis: 630 mm control: HEIDENHAIN - TNC 426M number of spindle speeds: 12.000 U/min numbers of positions in the tool changer: (2 x 16) 32 Tool bore: SK 40 surface area: 1.250 x 700 mm table load: 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm control: iTNC 530 Heidenhain NC-Swivle milling head:: turning speed range - main spindle: max. 12.000 min/-1 power capacity - main spindel: 10 / 15 kW max. Torque: 130 / 87 Nm tool taper: HSK-A 63 swivellable: NC: +30 / -120 ° NC-Rotary table:: table surface area: 1.000 x 600 mm table diameter: Ø 600 mm T-slots: 1x 14 x H7, 8x 14 H12 max. table load: 500 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x12 (24) pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm total power requirement: 45 kVA weight of the machine ca.: 6,8 t dimensions of the machine ca.: 4,5 x 4,5 x 2,5 m Documents: Chip conveyor: Coolantsystem: turning milling head: elektr. hand wheel: Spray gun: exhaust fan: Showa CRD-1500R Operation mode 4: test prob ...
Key data: 600 mm, 500 mm, 500 mm
CNC 5-Axis Vertical Machining Center DMG Mori DMU 60 eVo Year of construction 2017 Heidenhain TNC 640 ERGOline 2-axis NC swivel rotary table Table size 600 × 500 mm Table load max. 400 kg Table NC Rotary Axis C-Axis 360° Table NC swivel axis B-axis -5° / +110° X 600 mm Y 500 mm Z 500 mm Spindle holder SK 40 BIG PLUS Spindle drive power 25 / 35 kW AC Spindle speeds up to 20,000 rpm. 120 tool magazine slots Operating hours 47,589 Spindle hours 28,638 Offer number MV-6512
Key data: 750 mm, 600 mm, 520 mm
CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513
The machine is in good technical condition, testing is possible by prior arrangement.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With track control Heidenhain iTNC 530 Year of Make: 2005 Travels: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1250 mm x 700 mm clamping surface 3 D Probe Heidenhain Tool measurement in the BLUM Laser workspace Vertical tool changer with 32 magazine positions (HSK 63) Full protection cabin with sliding doors and interior lighting Electronic handwheel Operating mode 3 + 4 Chip conveyor Coolant Setup 3-Piece Height Adjustable Machine Shoes Spindle Oil Cooler Control cabinet cooling unit (Rittal) Operating Instructions
travel -x axis: - mm travel -y axis: - mm travel -z axis: - mm B-axis swival range +/-: -90° / +12 ° C-axis: 360 ° control: HEIDENHAIN - Millplus number of spindle speeds: 12.000 U/min numbers of positions in the tool changer: 60 tool taper: SK40 NC rotary table diameter: 600 mm fixed clamping table: 1.000 x 600 mm max. table load: 500 kg 5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (40bar), a 60-way tool changer, NC - rotary table, Renishaw measuring probe and chip conveyor. Additional equipment information: - NC swivelling head B-axis - NC rotary table C-axis integrated in the fixed table - Direct position measuring system in X/Y/Z (glass scales) - Extraction system - 3D Quickset - Handwheel HR 410 The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared ...
GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...
x-travel: 1.135 mm y-travel: 1.050 mm z-travel: 750 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 14.000 min/-1 power capacity - main spindel: 19 kW max. Torque: 100 Nm tool taper: HSK-A 63 table surface area: 1.400 x 1.050 mm max. table load: 2.500 kg max. workpiece sizes: 1.400 x 1.240 mm max. workpiece height: 750 mm tool magazin:: number of toolpositions: 30 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 365 / 395 mm max. tool weight: 8,0 kg change-time chip to chip: 6,1 sec feeds:: feed speeds: max. 40.000 mm/min rapid traverse: 40 m/min Accelaration: 6 m/s² Feed force ( X / Y / Z ): 14 / 20 / 14 kN total power requirement: 44 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 6,0 x 5,0 x 3,3 m Documents: Chip conveyor: Coolantsystem: high pressure coolan ...
Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal650 mmCross700 mmVertical950 mmGeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate CabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...
This 3-axis DECKEL DMU 60 E was manufactured in 1998. It features a spindle speed of 12,000 rpm and an impressive X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine includes a fixed angle table with a clamping surface of 1000 x 542 mm and a 25-position double gripper tool changer. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 60 E vertical machining centre we have for sale. Contact us for further details.
This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. Its well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine.
This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details.
x-travel: 400 mm y-travel: 400 mm z-travel: 375 mm total power requirement: kW weight of the machine ca.: 7150 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 10970000633 control: 3D Bahnsteuerung MILLPLUS letzte Ausbaust Control: 67 10.221.661 x-travel: 600 mm y-travel: 700 mm z-travel: 550 mm spindle: SK40 - neu - 380 Std. : spindle speed:: 12.000 U/min automatic swivel milling head: tool change unit: 30 Plätze : Infrarot-Taster : : : : 600 L : : : : 40 bar : mode of operation: 3 + 4 : : MillPlus IT flushing gun: mit Pumpe : Durchmesser 630 mm T-slots: 9 T-Nuten 14 H7 / 63 mm capacity: 700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
