dmu 50 evolution used for sale

Lathe LABOR E 300 Brand: LABOR Model: E 300 Year of construction: 1997 Chuck size: 370 mm Center height: 300 mm Maximum turning length: 5000 mm Bed length: 6250 mm Bar capacity (spindle bore): 100 mm Self-centering chuck: Yes Four-jaw chuck: No CE Certification: Yes Overall dimension: 8000 mm x 2000 mm x 1500 mm H Our internal ref. 787

Engel E-Victory 170H/50V/120 combi (2015) 2k machine Robot Engel Viper 20 Linear CC300 controll Clamping force: 1200 kN Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 21.361 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h

Engine Brand: DETROIT DIESEL, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Working Hours: 2850 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 558 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 380/415 , Generator Amps: 760/696 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/stamford-hc544d-generator-500k va-used/239, , = More information =, , Empty weight: 3.750 kg, Type number: HC544D Generator 500KVA

Engine Brand: Poyaud Diesel, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 2001 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 441 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 500 , Generator Hz: 50 , Generator Volts: 220/380 , Generator Amps: 1375/760 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/poyaud-diesel-b6l85-generator- 500kva-used/42331, , = More information =, , Empty weight: 5.000 kg, Type number: B6L85 GENERATOR 500KVA

Key data: 820 mm, 3000 mm

Smooth X Control Max. turning diameter: 820 mm Travel: X/Y/Z/Tailstock: 870/500/3,122/2,990 mm B: -30° to +210° (0.0001°) Main spindle Drive power: 30 kW Max. speed: 3,300 rpm Max. torque: 3,100 Nm Spindle nose A2-11 Spy bore: 104 mm Milling spindle Drive power: 37 kW Milling spindle max. speed: 10,000 rpm Tool magazine 40 tool positions Capto C8 Programmable NC tailstock MK5 - Tailstock forward/back via footswitch - Tailstock extension 150 mm Hydraulic bezel, SMW Autoblok type RX5 - Max. clamping range: 430 mm Automatic opening/closing of the clamping jaws Clamping force regulation high/low (via M-code) 3-jaw chuck Schunk 500 mm Cooling with air through the rotating milling spindle Cooling by the spindle 70 bar Mayfran Concep 2000II Coolant System - Double switching filter - 70 bar high-pressure pump - 3 pressure levels - Hinged belt chip conveyor Maz ...

Properties: Volume 5070 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3600 mm Height 2500 mm Diameter width 1500 mm Weight 400 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Subsoil: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 3 calotte feet, height-adjustable, with wash ...

gemotoriseerde X as Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 600 mm Max travel Z-axe: 600 mm Max height workpiece: 600 mm Power on spindle: 3 kW Table size: 900 x 250 mm

Glass machine for small jars approx. 4800 per h output for yoghurt in a jar Format customizable and overhaulable

New Goedhart LLK.p 22x6x3900x50/50x(2x8)+ Freon evaporator. Please notice that we can deliver this evaporator with 4 suitable fans that have an diameter of 780 mm & the capacity is based on an airflow of 40.000 m³/h. Specifications: Brand: Goedhart Type: LLK.p 22x6x3900x50/50x(2x8) Capacity: 63,5 kW (Based on an airflow of 40.000 m³/h) Refrigerant: Freon Number of fans: 4 Fin spacing: 8 Sizes: 4450x1550x1410 mm (LxWxH) Surface: 338 m² Volume: 101 dm³ Weight: 590 kg

Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.

For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately.

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

Lippert belt conveyor GF 3000-650-500 RA1410 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 3000 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (UR): Ø = 81 mm Belt: Type SNB-8E Year of construction: 2 ...

Key data: 900 mm, 5000 mm

Sony Digital read out 2 axis Taper Turning attachment Steady rest 4 pcs 3 jaw chuck selfcentering 4 jaw chuck independent Coolant system

Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg

Key data: 730 mm, 730 mm, 740 mm

CNC Horizontal Machining Center CNC control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper CAT 40 Spindle speed 18,000 1/min Spindle motor 30/22 kW Mazgazin capacity 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

A paper filling system for dispensing packaging paper is available. Speed: 30m/min, grammage: 70g/m²/120g/m². Machine dimensions X/Y/Z: approx. 750mm/500mm/1300mm, weight: approx. 80kg. Documentation available. An on-site inspection is possible. The machines are ready for shipment. The picture is a sample.

A start-hole drilling machine Madra-EDM is available. Clamping dimensions X/Y: 600mm/400mm, max. workpiece height: 300mm, travel X/Y: 500mm/400mm, travel W: 250mm, travel Z: 0.01mm-380mm, max. electrode length: 400mm, max. workpiece weight: 500kg, drilling diameter range: 0.3mm-3mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/2000mm, weight: approx. 1000kg. The electronics of the machine are defective, as the current for the erosion process is not provided. Dokumentation vorhanden. An on-site inspection is possible.

Source: TruPulse 124 Wavelength of the laser light:1064 nm Maximum average power:140 W Minimum pulse output:300 W Maximum pulse output:6 kW Minimum pulse duration:0.3 ms Maximum pulse duration:50 ms Maximum pulse energy:30 years Maximum pulse repetition rate:833 Hz Beam parameter product:16 mm-mradX-axis:450 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmY-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.1 mm Repeatability:± 0.02 mm Z-axis:300 mm Speed:3000 mm/min Positioning accuracy:± 0.05 mm Repeatability:± 0.02 mmRotary axis Turntable:120 mm Free inner diameter:45 mm Maximum speed:80 rpm Diameter of three-jaw chuck:80 mm Central passageways:16 mmClamping range, inside:2-71 mm Clamping range, outside:22-69 mm

A double mitre saw Emmegi (Pressta Eisele) is available. Saw blade diameter: 500mm, saw heads: 2, saw head swivelling range: 90°-45°, cutting length range: 250mm-5000mm, max. cutting height: 350mm, max. cutting width: 160mm. Machine dimensions X/Y/Z: approx. 5750mm/1250mm/1700mm, weight: approx. 1250kg. Documentation available. An on-site inspection is possible.

Included: Giusti 500 Litre S/S Fully Reconditioned Used Jacketed Mixer Fully Reconditioned Control Panel all in perfect working condition Rare to the used machinery marketplace, the Giusti 500 Litre S/S Fully Reconditioned Jacketed Mixer originates from a high-profile Pharmaceutical Plant in Europe. Working Description Fully reconditioned Giusti 500 litre stainless steel anchor paddle mixer and built into jacketed hemispherical vessel with powerful 2-speed bottom mounted high shear mixer. The unit has seen a very little use, and it is in overall excellent condition. It is a fully stainless-steel mixer and comes with newly fitted, high efficiency top mounted mixer drive and the anchor paddle features PTFE scrapers for preventing the build-up of a stagnant boundary layer and to keep the heating surfaces free. Additional wave breakers are fac ...

control: FANUC 18i MB Number of axles: 4 St. x-travel: 710 mm y-travel: 610 mm z-travel: 650 mm b-axis: 0.001 ° size of pallet: 500x500 mm tool piece magazine with: 60 milling spindle: BT40 spindle turning speed - stepless: 15000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 15 t dimensions of the machine ca.: 5.1 x 3.7 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mm Capacity: 60 Watt Weight: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 720x900x1160 mm Weight: 120 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x2170x2080 mm Weight: 4250 kg Total power requirement: 81 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1700x750x1250 mm Weight: 600 kg Total power requirement: 3 kw Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1685x765x650 mm Weight: 91 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x2100x1300 mm Total power requirement: 0 kW Weight: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1800x1800x1900 mm Weight: 3000 kg Total power requirement: 33,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2021 Model: Modula Lift ML 50D Height: ...

Freezer, freezer Used machine year of manufacture not visible Stainless steel cladding, for 60/40 trays Convection cooling Temperature range down to -25°C, with digital display with 2 pairs of support rails mobile 230V connection

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload Manufacturer: Modula Year of Make: 2013 Model: Modula Lift ML 50D Height: ...

Modula Lift ML50D Vertical Storage Lift Modula are automatic vertical carrier storage systems based on the concept of vertical storage and saving floor space. You can store any type of material safely, cleanly and efficiently, saving up to 90% of floor space. The Modula are the result of more than 30 years of experience of an Italian company with high-tech products • Minimal energy consumption • Automatic weight monitoring during beam retraction • Dynamic storage location assignment of the carriers in the device according to the heights of the stored goods • Equipment frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle timing belt • Extractor guide system with 6 HDPE rollers per side • Management of the carriers with differentiated payload The vertical storage system has been regularly serviced by the manufacturer  ...

A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible.

Konrad Ströbel 500 #00083 Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal I5542423 and hardened shafts, 90 I5542423 degree shart ...

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Dimensions (L/W/H): 2100x920x2250 mm Weight: 410 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

🏗️ Looking for height, load capacity and speed? This set delivers: 3 complete Hünnebeck ID 15 support towers , approx. 8.50 m high †including all components and H20 brackets for a safe and stable top working platform. 📐 Built for large-scale formwork: Perfect for beam shoring, slab formwork with high spans or temporary support in infrastructure projects. Compact, durable and fully compatible with standard formwork systems. 📦 Fully equipped: You get 3 complete towers †ready to assemble and use on site. Includes working platforms with H20 consoles †no need for extra add-ons. ✅ Modular and expandable: Additional used Hünnebeck ID 15 parts are in stock. Combine towers, add height or scale up as needed. ⏱️ Limited stock available: High scaffold towers like these are hard to find on the used marke ...

Maximum efficiency with Frami! Are you looking for reliable formwork elements for your construction project? Then we have just what you need! Our Doka Frami Xlife elements in heights of 1.50 m and 1.20 m impress with their quality, durability, and ease of handling. 🔧 ✅ High reusability †thanks to the robust Xlife coating ✅ Lightweight & practical †for quick and efficient processing ✅ Versatile use †ideal for a wide range of construction projects Get yours now and benefit from proven professional quality! 🚀 💡 Good to know 💡 We also have the necessary Frami accessories available in stock at Form-on †just ask us! Price: from € 103,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 2-star Serviced & ready to use. Basic cleaned condition. Medium used formwork & scaffolding ...

🔵 Frami as far as the eye can see! 🔵 Looking for high-quality formwork elements? Then you’ve come to the right place! We offer Doka Frami Xlife elements in heights of 1.50 m and 1.20 m †the perfect solution for efficient and durable formwork. ✅ Robust & durable †thanks to the Xlife coating for high reusability ✅ Lightweight & efficient †ideal for quick and easy handling ✅ Flexibly combinable †suitable for various construction projects Get your Frami Xlife element today and benefit from quality that convinces! 💪🏗️ Price: from € 143,00 / PCS (excl. VAT). Partial quantity: possible Subject to prior sale Classified 3-star Serviced & ready to use. Professionally cleaned condition. Used formwork & scaffolding suitable for standard up to demanding requirements. 189 x Frami Xlife panel 0.75 ...

Transnorm conveyor belt GF 6800-600-500 RA2446 Technical data: Conveyor length (NL): 6800 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

Transnorm conveyor belt GF 6100-600-500 RA2447 Technical data: Conveyor length (NL): 6100 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.8 m/s Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6100 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,75/S1 Conveyor speed m / s: 0,8 scope of delivery ...

Interroll conveyor belt GF 4500-600-500 RA2451 Technical data: Conveyor length (NL): 4500 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 4500 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

Transnorm conveyor belt GF 14200-600-500 RA2445 Technical data: Conveyor length (NL): 14200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 14200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

Transnorm conveyor belt GF 7200-600-500 RA2448 Technical data: Conveyor length (NL): 7200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstat ...

Transnorm conveyor belt GF 13900-600-500 RA2450 Technical data: Conveyor length (NL): 13900 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Small 25mm pulley for low-gap transfer Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 13900 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW ...

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm

Transnorm Rising falling Incline belt conveyor with leading belt GF 5800+1000-600-600 RA2454 Technical data: Conveyor length (NL): 6800 mm ( 5800 mm riser segment + 1000 mm forerun) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,35 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 5800 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm ...