dmu 50 evolution used for sale

Marel concept 500 labelling machine, - top and bottom labelling machine

Part Number 7674 SPECIFICATIONS - max diameter of the main saw blade 300-450mm - height of the main saw blade adjustment vertically - for saw blade ⌀300 0-75mm - for saw blade ⌀350 0-100mm - for saw blade ⌀400 20-125mm - for saw blade ⌀450 45-150mm - 45° height of the main saw - for saw blade ⌀300 0-50mm - for saw blade ⌀350 0-70mm - for saw blade ⌀400 12-85mm - for saw blade ⌀450 30-105mm - Circular saw blade tilt 0-45° - sawing length with the help of an auxiliary table - with a strip set at the back of the table for a movable table 300 = 3200mm - cutting width with guide 50-1750mm - Extension (from – to) 1965-3200mm - bumper with digital readout 50-1630mm -Max. distance between the longitudinal guide and the saw 1400mm - main motor power 6kW - undercutting spindle motor power 0.75kW - Saw blade diameter of the scoring spindle 120-130mm - ...

GENERAL CHARACTERISTICS:, Grinding Wheel Dimensions: Ø610xØ304,8x508 mm, Regulating Wheel Dimensions: Ø355xØ152,4x508 mm, Ø min/max to be rectified: 3 - 300 mm, Dimensions of the work wheel: Ø610xØ304.8x508 mm, Dimensions of the drive wheel: Ø355xØ152.4x508 mm, Weight: 17000 kg, Power: 100 kW

CONVEYOR BELT, Sturdy steel construction,, belt width 450 mm,, total length 8 500 mm,, inclination change 45°,, PVC belt L450mm, with applied trapezoidal guides,, corrugated edges, H50 mm and flights H50 mm L250mm,, idler roller diam.219,, outlet 500x150mm,, side rails,, 0.75 kw gear motor, rust-proof+enamel paint

L-profile: 120 x 120 x 10 mm flat steel: 300 x 15 mm round/square steel: 40 mm punching: dia 28 x 13 mm U/I-profile: 100 mm

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm, Power: 75 kw

Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation

Technical data of the pallet rack stand: Shelving system: Polypal Type: Stockpal The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Type: SKMO 3720 P Profile dimensions: 85 x 63 x 2 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 4,500 mm high 1,100 mm deep Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 11kw Bottom 5.5kw Feed speed adjustable by inverter up to 30m/min Feed motor 4kw Drive on cardan shafts Pneumatic clamps 3 axes controlled from the panel (width, height, pressure position) Worktop air cushions Input table length 2470mm CE Certified DTR documentation

grinding diameter: 140 -1260 mm grinding length: 5000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 800 x 80 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 35000 kg spindle drive: 30 kW grinding wheel turining speeds: 720 - 1800 U/min feeds of grinding head: 60 - 4000 mm/min grinding feed: 0,0125 mm/U working spindle drive: 45 kW work piece spindle speed: 240 - 2400 U/min total power requirement: - kW weight of the machine ca.: - t 2008 Electrical Upgrade Computer Controlled Allen Bradley Powerflex Digital Drives Allen Bradley 1606-XL Power Supply N-Tron 508 XT Ethernet Card Allen Bradley Panelview Plus 1250 Digital Readouts Allen Bradley PLC CompactLogix L32E - Crowning and Cambering Capabilities - Stationary Rotating Roll with Travelling Grinding Carriage - 2 Steadies - Servo Drives: Headstock & Grinding Wheel, - Rapid Traverse C ...

Able Engineering 500L Tank Chocolate Tank 2015, Stainless, 500L capacity, jacketed mixing tank, Top mounted agitator, central bottom discharge into jacketed Rotan Pump all mounted on skid with load cells, 3Ph

Offer 25033 Specifications: - Total load capacity 1600 kg - Load capacity per chain strand 800 kg - Lifting height – chain path approx. 8 m - 2 lifting speeds 3.0 / 12.0 m/min - Drive 400 V - Weight approx. 160 kg - Space requirement without chain case approx. W 650 x H 350 x D 650 mm - Space requirement with chain case approx. W 650 x H 850 x D 650 mm - Handheld remote control - 1 piece separate deflection mount for the second chain strand - 1 piece load holder with threaded rod

4-Spindle Paper Drilling Machine Ideal 504

Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C

elektrische Rillmaschine - Perforiermaschine / eletric Creasing - Perforation machine

Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TM Year 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Shrinking tunnel with conveyor Film carriage on rails Dimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mm Sehr guter Zustand - TOP Condition

Plotter HP 5000 Serial-No. SG17D1402P

Broschürenfertigung / Booklet Maker Duplo System 5000 Baujahr / Year 2008 - Serial-No. 080100007 Zähler / Counter 7,6 Falzungen-Heftungen Anlage besteht aus / Booklet Maker consist of: Zusammentragmaschine / Air Suction Collator DC-10/60 - 2 x 10 Stations Feeder Format / Size min.120mm x 148mm - max. 350mm x 500mm Grammatur / Paper weight 40-300g/qm Stapelhöhe / Infeed height Station 60mm Geschwindigkeit / Speed max. 5.000 Product/h Broschürenfertigung / Booklet Maker DBM 500 Heften-Falzen / Stitching-Folding Format / Size min. 120x170mm; max. 350x500mm 2 Universalheftköpfen / 2 Stitching heads Hohner 48/5S Presswerk / Pressing Station DBM 500-P Frontschneider / Trimmer DBM 500T Auslageband / Delivery band DBM -LS Brücke Lifing unit LUL -HM Inklusive Kompressor / Include Compressor Rietschle

Anleimmaschine  / Gluing Machine Tränklein AM500 Zweiwalzen-Anleimmaschine  / Two-roller Gluing Machine Serial-No. 20185 Arbeitsbreite / Working width 500mm Arbeitsgeschwindigkeit / Working speed 4 - 20 m/min für Kaltleim / for cold glue dieses Gerät trägt Klebstoff auf der Rückseite eines zu beleimenden Materials auf this device will carry adhesive on the back of a material to be glued

Used packaging machine made by Hugart, type: DS 5000. Capacity 5000 pcs / h. New: 2013.

• Output max. 30 bundle/min • For PE-film, width 50-500 mm • Film roller diam. max. 300 mm • case height 12-100 mm, width 15-330 mm, length 50-300 mm • Bundle height 30-200 mm, width 15-300 mm, length 60-330 mm • Stacking device • With shrinking tunnel • Electr. connection 400V/50Hz This machine is offered at a special price and sold as-is without technical inspection.

Two Battenfeld injection molding machines are available. 1) Battenfeld BA 1600, year of construction: 2001, clamping force: 1600kN, tie bar distance: 520mm/520mm, installation height min./max.: 225mm/550mm, opening stroke: 480mm, centering diameter: 160mm, screw diameter: 50mm, injection weight: 520g. 2) Battenfeld BA 500/200 CDK, year of construction: 1995, clamping force: 500kN, tie bar distance: 320mm/320mm, platen dimensions X/Y: 490mm/490mm, installation height min./max.: 150mm/350mm, opening stroke: 250mm, max. platen distance: 600mm, screw diameter: 35mm, injection volume: 134.7cm³, injection weight: 122.5g, injection pressure: 1484bar. Machine dimensions X/Y/Z: approx. 3800mm/1350mm/1800mm, weight: approx. 3200kg. The machine has cylinder problems with the screw and the forward/backward unit. Documentation available. On-site inspection is possible. Individual sale possible.

A Keyence optical 3D coordinate measuring machine with a 360° 3D scan is available. Measuring accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/composite: 200mm/500mm, rotation range: 360°, tilt range: 45°, max. table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation available. On-site inspection is possible.

max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.

A misted Rippert wet separator system in stainless steel design is available for the painting process. Working width: 5000mm, exhaust air capacity: 18000m³/h, water capacity: 700l. Stainless steel chimney included. On-site inspection is possible.

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - / Contact us at -

Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible.

Manufacturer: Gandra Model: TEC 500+ Year of Manufacture: 2017 Condition: Used Filling Type: Automatic (Hot or Cold Filling) Supported Bag Sizes: 3L, 5L, 10L, 20L Packaging Feed: Bags inserted automatically from a belt or manually Output Capacity: Up to 500 bags/hour (3L capacity) Features: - Vacuum generation - Nitrogen injection after filling - Liter counter and bag counter - Manual removal of filled bags Power Supply: 400 V / 50 Hz Installed Power: 1.5 kW Power Consumption: 2 kW Required Air Pressure: 6 bar Find more here - / Contact us at -

pressure: 60 t stroke: 60-80 mm no. of strokes: 60-300 Hub/min weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINIG GRECON double-head finger joint line mod. PJ 150/500 - CE - Wood length at the entrance 150 - 700 - Wood width 40 - 150 mm - Wood thickness 18 - 80 mm - Press length 6100 - Pressure force 120 kN - 15Kw cutter motor - 5.5Kw engraver - Year 2004 CE

Semi-automatic cut-off machine CURSAL mod. TRV 500 – CE compliant - Version with movable pressure - Feed from right to left - Rug GRT 6000x400 - N. 3 unloading benches 1000x1200 - Rejector mod. SIVARON SS-80 - Waste discharge belt tss 45° mm. 2500 - Matr. 972842 - Year 1997 - Complete with CE declaration and manual

Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...

Good day I have a Top Teca Print pad printing machine with automatic pad cleaning here! monochrome print. Absolute professional machine. If you have any questions, just email!

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 22004 ...

A total of three conveyor belts (transport modules) are available for the PCB industry. 1) Three-segment conveyor belt with buffer module Asys FPS 30, year of manufacture: 1996. 2) Transport module Rommel SM 600 T. 3) Transport module Rommel BM 500 S, year of manufacture: 2000. Documentation available. On-site inspection is possible.

Mobile concrete batching plant SUMAB 500: - The basic module is equipped with 2-4 hoppers. - Completely pre-assembled at the factory, which reduces assembly time. - Does not require a special foundation for installing the main unit of the installation (only a solid concrete slab). - Equipped with a sealed cabinet located on the structure and a computer control system. - Includes high-end installation features in a compact size. - The entire assembly (except silos) is transported in one 40-foot container. Basic indicators: - Dosing cycles 0.5 m3. - Turbo concrete mixer FTR 750/500. Equipped with a weighing system for aggregate and concrete. - Equipped with 1-2 units of 2 bunkers with a capacity of 7 m3 each. - Aggregates are dosed using B400 extraction conveyors. - Water dosing device with counter. - Water installation equipped with a 1.1 kW feed pum ...

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-500 L , Capacity: 515 Litres , Coo ...

Specifications: Manufacturer: 3M ESPE Type: Lava CNC 500 Control: Beckhoff Year of Make: 2008 Compressed air: 6.5 bar Rated power: 1 kW Rated mains frequency: 50/60 Hz Weight Weight: 620 kg Condition Condition: Used Functional: Tested and fully functional

X-axis travel mm: 260 Z-axis travel mm: 590 B-axis travel mm: 624 Turning length mm: 515 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 923.8 Swing over cross-slide mm: 755 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 16 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5/5.5/3.7 (3min/5min/cont) Indexing time s: 0.25 Main spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 61 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Counter spindle Speed spindle rpm: 6.000 Drive power spindle kW: 11/7.5 Spindle bore mm: 43 Chuck type: Hollow Chuck (6") Manufacturer: KITAGAWA Coolant system Tank capacity liter: 235 Equipment Chip conveyor Signal lamp High pressure pump Chuck foot switch (double) for main and counter spindle Interface for ...

Tool presettler SOMET type SPS 500 UMash. No. S1-020 Year of construction 1987Table surface 545 x 1000 mmTravel distances X = 500 mm, Y = 340 mmWidth in the portal 550 mmHeight table - lower edge portal 250 mm- Portal longitudinal guidance on the right and left of the table- Adjustment via very fine threaded spindles with handwheel- Quick adjustment via electric unlocking- Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100- 2 pieces of clamping devices for tool measurement- on substructure with shelf and drawerSpace requirement L

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Measuring and marking plate cast steel-grey cast iron heavily ribbed STIEFELMAYER comes from a measuring machine with a hand-held measuring armhigh-precision measuring plate with a good surfaceMasch. No. 8530979 Year of construction approx. 1989Length 5000 mmWidth 2000 mmThickness 350 mmWorking height 690 mmPanel thickness 50 mm throughout- 15 height-adjustable feet- very precise and stable longitudinal guides, screwed to the side of the plateSpace requirement L x W x H 5000 x 2120 x 400 mmWeight approx. 7500 kggood surface; used

CNC Control, Numeric Control, CPU Rackaus OKUMA LB 10OKUMA Typ OPUS 5000 CPU /IF RACK 9ANr.: E7191-292-325-1Baujahr 1985Ser. Item no.: 003184Dimensions W x H x D 390 x 345 x 240 mmThe device is still ready for operation installed in an OKUMA LB 10. Further components from OKUMA can be found under stock number: 60403, 60404, 60405, 60407, 60408, 60409, 60410, 60411; used

E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used