dmg siemens used for sale

This 5-axis DMG ULTRASONIC 50-5 Linear was manufactured in 2010. It features a traverse range of 500 mm in the X-axis, 450 mm in the Y-axis, and 400 mm in the Z-axis. The machine is equipped with a USB 1818 hybrid spindle, offering speeds from 200 to 18,000 rpm for both ultrasonic hard machining and milling. If you are looking to get high-quality machining capabilities, consider the DMG ULTRASONIC 50-5 Linear universal machining centre we have for sale. Contact us for further details.

GeneralUniversal Turning Machine with cycle control and RMS-Sensor; Control: MANUAL PLUS Main drive 1Type of main driveAC Drive power (100% DC)12 kWSpeed range10 - 3000 rpmNumber of Gearsteps2 Max. torque (40% DC)920 NmWorking areaSwing diameter over guide ways500 mmSwing diameter over transverse guideway285 mmCentre height1000 mmTransverse stroke260 mmWork spindle (left)Spindle noseacc. To DIN 55027 Diametre of spindle nose8 Spindle bore70 mmSpindle diametre on front bearing120 mmSlide 1Rapid traverse in X8 m/minRapid traverse in Z10 m/minFeed rate in X5000 mm/minFeed rate in Z5000 mm/minFeed rate torque (100% DC) in X500 daNFeed rate torque (100% DC) in Z1000 daNFloor space/WeightDimensions (L x W x H)3,1 x 1,95 x 1,83 mWeight approx.2900 KgMiscellaneousColour Disk turret, Sauter, DIN 69880-30 mmDisk turret, 8 stations for fix tools, make Sauter, tool reception DIN 69880-30 mm mounted  ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgPre-setting PackagePre-setting Package: - tool ...

GeneralUniversal machining centre; Control: 3D control Heidenhain iTNC 530 Working area 1Longitudinal500 mmCross420 mmVertical380 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20 -18000 rpmSpindle taperHSK-A 63 Pick-up toolchangerPick-up tool changerNumber of tools 32NC rotary table w. swivel axisNC rotary table with swivel axisRotary air leadthroughRotary air leadthrough for NC rotary table with swivel axis 2x G1/8 interfaceRotation Speed 5. Axis 26 rpm5. Axes (swivelling range) 0 - 180 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 33 rpmDistance between T-Slots 63 mmNumber of Slots 5Slot width 14 mmMaximum load (table centre) 200 KgCentre bore 30H7 mmTable surface 500 x 380 mmType of Measuring system Direct measuring systemSpecial equipmentSealing air in swivel rotary table

Used machine Machine Type: CNC Swiss Automatic Lathe Model: Sprint32/8 Manufacturer: DMGMORI Control: Fanuc 32i First commissioning: 2019 #001328 Location: Germany T-main and sub-spindle - Y-axis on carriage 1 - Y-axis on carriage 2 - C-axis on main spindle - C-axis on sub-spindle - Tank for chips included Coolant Pump - Workpiece unloading belt - Flushing for counter-spindle pliers - Hinge belt chip conveyor - Signal lamp 4-colour - IEMCA Boss 338/32HD bar feeder This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Inv. Num. : 8008 Type: DMG DMU 50 eco Producer: Deckel Maho Gildemeister Created: 2010 Parameters: Control system: Siemens Sinumerick 810D Switch-on hours: 56933 h Operating hours: 25670 h Number of axles: 5 pieces Number of stacking positions: 16 Maximum spindle speed: 8000 1/min X-axis travel: 500 mm Y-axis travel: 450 mm Travel Z axis: 400 mm Equipment: ShopMill

x-travel: 1135 mm y-travel: 1050 mm z-travel: 710 mm 0: dia 1240 x 690 mm control: Heidenhain TNC 640 : : 15000 min/-1 : 35 kW tool taper: SK 40 work table:: table surface area: 1050 x 860 mm max. table load: 2000 kg : : 30 pos. tool taper: SK 40 change-time chip to chip: 6 sec feeds:: : 40 m/min feed speeds: 40000 mm/min total power requirement: - kW weight of the machine ca.: 18 t dimensions of the machine ca.: 5,1 x 3,99 x 3,4 m 5-Axis Machine equipped with: - CNC Control Heidenhain TNC 640 - universal Milling Head (B-Axis +30/-130°) - NC- rotary Table dia 800mm (C-Axis) - BMF coolant and filtration system. - electr. Handwheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

travel -x axis: 880 mm travel -y axis: 630 mm travel -z axis: 630 mm control: HEIDENHAIN - TNC 426M number of spindle speeds: 12.000 U/min numbers of positions in the tool changer: (2 x 16) 32 Tool bore: SK 40 surface area: 1.250 x 700 mm table load: 600 kg Milling machining centers - universal | DMG - DMU 80T equipped with B axis The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 80 T | 80-T The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction: 2011 Fully automatic with manual options Intuitive input of automatic measurement cycles Wear-free and maintenance-free linear motors Flexible control console From manual to fully automatic Low distortion even under the maximum permissible load thanks to its high installed weight FEM-optimised and thermally stable cast iron construction RFID – data carrier system Customer-specific data storage Measurement processes with integrated data retrieval and storage Integration of all popular RFID systems The read / write head can be positioned automatically and manually for all popular tool holder systems Technikal data Length and diameter up to 1,000 mm Max. tool diameter for measuring according to snap gauge principle 100mm Maximum tool weight 160 kg Tool holder SK50 (additional holders availale from company HAIMER/Microset) Concentricity at the spind ...

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

GeneralCTX beta 1250 4A Two spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - counter spindle slide; Control: CELOS X with Siemens 840D SL Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmSpeed range0-5000 rpmC-Axis Speed2000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% DC)280 NmSlide 1Longitudina ...

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

Key data: 600 mm, 500 mm, 500 mm

CNC 5-Axis Vertical Machining Center DMG Mori DMU 60 eVo Year of construction 2017 Heidenhain TNC 640 ERGOline 2-axis NC swivel rotary table Table size 600 × 500 mm Table load max. 400 kg Table NC Rotary Axis C-Axis 360° Table NC swivel axis B-axis -5° / +110° X 600 mm Y 500 mm Z 500 mm Spindle holder SK 40 BIG PLUS Spindle drive power 25 / 35 kW AC Spindle speeds up to 20,000 rpm. 120 tool magazine slots Operating hours 47,589 Spindle hours 28,638 Offer number MV-6512

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning o ...

The machine is in good technical condition, after prior agreement it is possible to test it. with the Siemens Shopturn system, including the feeder, the machine is fully equipped. BASIC PARAMETERS Working space max. turning Ø: ≈ 410–500 mm max. length: 800 mm distance between spindles: approx. 1020 mm swing diameter above the bed: ~700 mm realistic: ideal for shafts, flanges, bodies up to ~800 mm Travels (axes) X: ~480 mm Y: 100 mm Z: ~800–845 mm B axis: 110 (5-axis machining) C axis: 360 (indexing + interpolation) this makes it a full-fledged turn-mill (not a classic lathe) Spindles main spindle speed: ~5000 rpm power: ~25–34 kW passage: approx. 76–87 mm counter spindle speed: ~6000 rpm milling spindle (main difference compared to a classic lathe) speed: up to 12,000 – 20,000 rpm power: ~19–22 kW taper: HSK-A63 or Capto C6 allows: milling drilling tapping 5-axis simultane ...

travel -x axis: - mm travel -y axis: - mm travel -z axis: - mm B-axis swival range +/-: -90° / +12 ° C-axis: 360 ° control: HEIDENHAIN - Millplus number of spindle speeds: 12.000 U/min numbers of positions in the tool changer: 60 tool taper: SK40 NC rotary table diameter: 600 mm fixed clamping table: 1.000 x 600 mm max. table load: 500 kg 5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (40bar), a 60-way tool changer, NC - rotary table, Renishaw measuring probe and chip conveyor. Additional equipment information: - NC swivelling head B-axis - NC rotary table C-axis integrated in the fixed table - Direct position measuring system in X/Y/Z (glass scales) - Extraction system - 3D Quickset - Handwheel HR 410 The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared  ...

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minWorking area 1Longitudinal400 mmCross400 mmVertical375 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mWeight approx.7200 KgPackage Mill / TurnPackage Mill / Turn NC-Mill-turn table 450x450 mm / 17.7x17.7 in rounded down to d460 mm / 18.1 in C-axis direct drive, speed max.1,200 rpm Integrated balancing system Motorspindle 20-20,000 rpm power 35/25 kW (40/100% ED) tool taper HSK-A63 according D ...

x-travel: 1.135 mm y-travel: 1.050 mm z-travel: 750 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 14.000 min/-1 power capacity - main spindel: 19 kW max. Torque: 100 Nm tool taper: HSK-A 63 table surface area: 1.400 x 1.050 mm max. table load: 2.500 kg max. workpiece sizes: 1.400 x 1.240 mm max. workpiece height: 750 mm tool magazin:: number of toolpositions: 30 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 160 mm max. tool length: 365 / 395 mm max. tool weight: 8,0 kg change-time chip to chip: 6,1 sec feeds:: feed speeds: max. 40.000 mm/min rapid traverse: 40 m/min Accelaration: 6 m/s² Feed force ( X / Y / Z ): 14 / 20 / 14 kN total power requirement: 44 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 6,0 x 5,0 x 3,3 m Documents: Chip conveyor: Coolantsystem: high pressure coolan ...

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

Manufacturer: DMG MORI Model: CTV 250 DF Year of Manufacture: 2019 Type of Machine : Power skiving machine / CNC Turning Center Max spindle speed: 6,000 rpm Secondary spindle speed: 7,000 rpm Machine weight: 7,000 kg Power supply: 400 V, 50 Hz, L1-L2-L3-N-PE phase Power consumption: 65 kVA Max current: 95 A Fuse: 100 A / 1.00 kA Max voltage: 440 V Control voltage: 230 V / 24 V Spare parts are available for sale separately Find more here - .ucymachines/ Contact us at - sales@ucymachines

GeneralTraveling column machine DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal1800 mmCross700 mmVertical700 mmTool changerType of magazineChain Number of tools30 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightDimensions (L x W x H)6,75 x 3,45 x 2,75 mWeight approx.14320 KgMiscellaneousClamping SystemDIN 69872 NC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel range: +/- 90° Swivel speed: 40 rpmFixed tableFixed TableTable ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmMax machining diameter460 mmSwing diameter over X linear guideways520 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemper ...

Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmGeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Main drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (40% DC)22,5 kWDrive power (100% DC)19 kWTorque (100% DC)85 NmTorque (40% DC)120 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33  ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmDouble cartridge filter for coolantDouble Cartridge Filter for Coolant Options includes two filters placed on the coolant distributor. When one filter is stocked, operator can manually switched  ...

General2-axes universal turning center with fixed tools; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup modeAlternative Speed TurningTechnology cycle Alternate Spindle Speed (Turning) for the application of an alternate speed for vib ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal650 mmCross700 mmVertical950 mmGeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate CabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmZ travel730 mmX travel300 mmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

This 3-axis DMG MORI CLX450 was manufactured in 2019. It features a 12-station tool turret and an integrated sub-spindle for enhanced productivity. The machine is equipped with a 3-jaw chuck on the main spindle. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX450 horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.

Key data: 460 mm, 705 mm, 3500 1/min

Sell a DMG T2 CNC lathe from 2023 with 1m bar feeder IEMCA The machine is in good condition and offers: • Modern Siemens One CNC control with touchscreen operation • Driven tools, C axis, short bar loader 1m, tailstock, chip conveyor, hydraulic chuck 250mm, tool measurement 5 driven tools, various tool holders • Robust design for professional use • Compact design with high performance • All protections and safety features The lathe has been regularly serviced and is ready for immediate use. Machine is still in operation. Ideal for workshops, prototyping or smaller series production. Price plus VAT If you have any questions, please feel free to contact us.

This DMG MORI CLX 350 V3 was manufactured in 2023. A universal turning machine featuring driven tools and a C-axis. It includes a hydraulic 3-jaw chuck D210mm, a 12-slot servo tool turret holder VDI 30 with 12 driven tool stations, and a hollow clamping device with a max. bar capacity of D65mm. A great opportunity to buy this DMG MORI CLX 350 V3 universal turning machine. Contact us for further details regarding this machine.

This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. Its well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine.

This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details.

DMG MORI CL2000A CNC turning center was built in 2017 in Japan by DMG MORI CO., LTD. The machine is new and has never been used. The DMG MORI CL2000A is an excellent choice for the production of high-precision and repeatable parts used in many industrial sectors. This compact yet extremely powerful lathe will excel in even the most demanding production challenges. All machining processes, i.e. precision turning or threading, are performed fully automatically by means of the spindle and the cutting tools, taken from a 10-position turret. The spindle, driven by a high-powered motor, rotates at a maximum speed of 4500 rpm and operates in two X,Z axes with feeds of 245 mm and 370 mm respectively. What’s more, the machine’s design is based on the Finite Element Method (FEM). This solution guarantees the maintenance of high geometrical accuracy of the design, even under heavy loads.  ...