dmg machining center used for sale

A chip conveyor for DMG Mori machines is available. Height: 1650mm, width: 1870mm, length: 3560mm, weight: approx. 600kg. Without pump and skimmer. Approximately half of the rails for further transportation are defective. Documentation available. On-site inspection is possible.

Control: Manufacture: SIEMENS 840D x-travel: 600 mm y-travel: 560 mm z-travel: 510 mm table-size: 900 x 560 mm spindle turning speed range: 12000 U/min tool magazin:: 30 weight of the machine ca.: 5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840D table - swivable +/-: +110 / -5 ° -C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 t dimensions of the machine ca.: 2.9 x 2.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 560 mm z-travel: 560 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic HandwheelSoftware option - DXF ImportSoftware Option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program.

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical40/40/40 m/minFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgMotor spindle 20,000 rpmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Tool magazine, chain vert., 60 pocketsTool magazine Vertical chain magazine basic with 60 magazine pockets SK 40 or optionally chosen spindle taper ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Technical DataRapid traverse longitudinal/transverse/vertical40/40/40 m/minFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Cross650 mmLongitudinal735 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Sl ...

GeneralHighly productive compact machining centres; Control: Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical1-60000/1-60000/1-60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross420 mmVertical380 mmMiscellaneousClamping SystemMAS 403 - 45° Floor space/WeightDimensions (L x W x H)1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) mWeight approx.4100 KgSpindle speed up to 24,000 r.p.m. BT30Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)TableTable surface 840 x 420 mmMaximum load (table centre) 300 KgSlot width 14 mmNumber of Slots 2Clamping grid M 12, 100 x 100 mmTool clamping for BBT 30 (Big+)Tool taper BBT 30 - Big+ Pull stud MAS 403 - 45°Tool magazine 25 placesTool magazine 25 places (suita ...

GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC ar ...

GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...

x-travel: 1800 mm y-travel: 700 mm z-travel: 700 mm control: Heidenhain iTNC 530 table surface area: 2100 x 700 mm table load: 1500 kg turning speeds: 20 - 18000 U/min taper ISO: SK 40 spindle motor: 35 / 25 kW rapid traverse: 40 m/min tool change unit: 60 -fach dimensions of the machine ca.: 5,5 x 3,5 x 2,7 m total power requirement: kW weight of the machine ca.: 14 t - Control Heidenhain iTNC 530 - 5-axis - Fixed table with integrated rotary table dia. 750mm (500kg) - IKZ 40 bar - Tool changer 60-fold (SK 40) - Milling head with B-axis - Chip conveyor - Spray gun - 3d Quick Set - BLUM laser measuring system - Direct distance measuring system - 2 Rotary Clean Windows - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

GeneralVertical Machining centre; Control: CELOS X with HEIDENHAIN TNC7 CharacteristicsTable surface1400 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z1100/600/510 mmRapid feed X / Y / Z42/42/42 m/minMotor spindle speedMASTER® 20.000 rpmMotor spindle speedMASTER® 20.000 rpm AC main drive: 35/25 kW (40/100% ED) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Air Coolant Internal (through spindle centre) switchable via M-FunctionAir Coolant Internal (through spindle centre) switchable via M-Function

x-travel: 760 mm y-travel: 460 mm z-travel: 560 mm Control: Siemens Sinumerik 840D b-axis: NC-Schwenkfräskopf A-axis: NC-Rundachse milling-head swivable +/-: -120 / +30 Tool changer: 60 Cooling through the spindle: IKZ 40 bar spindle turning speed range: 12.000 U/min spindle motor: 28/19 kW tool taper: HSK-A 63 max. torque on the spindle: 121 pm total power requirement: ca. 60 kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: - m Universal bar machining center - Siemens Sinumerik 840 D 3D path control - Powerline ShopMill - Controlled NC swivel milling head (B-axis) - NC rotary axis with integrated clamping system - NC bar loader - Slide/conveyor belt for parts disposal - Coolant tank 600 ltr. with paper belt filter - IKZ 40 bar through spindle center - Rotating viewing window - Tool breakage control - Chip conveyor - Tool magazine - Chain magazine with 60 magazine s ...

turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...

control: SIEMENS 840D SL ShopTurn turning diameter: 700 mm swing over bed: 900 mm turning length: 3065 mm c-axis: indexing: 0.001 ° turning speeds: -2500 U/min tool taper: VDI 50 Top turret tool hodler:: 12 tailstock quill taper MT: 5 y-travel: 160 mm rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 30 m/min Overall size: 4450x2100x2350 mm rapid traverse Z-axis: m/min weight of the machine ca.: 7200 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 450 mm, 400 mm

5 Axis CNC Machining Center Universal CNC Milling Machine DMG Ecoline DMU 50 eco Year of construction: 2011 Siemens Sinumerik Conveyor Complete documentation 5-axis machining of simple to highly complex workpieces. Swivel rotary table Powerful milling spindle 8,000 rpm Tool Changer with 16 Places Pick-up Magazine Direct position measuring system and centrally lubricated roller circulation guide for high long-term accuracy. Ball screw in the linear axes The machine is in excellent condition and is still energized.

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmMax. Turning Length1200 mmTurning diameter500 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment8 ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmBar diameter max.65 mmMax. Turning Length1200 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperCapto C6 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22 kWTorque ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.75 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...

CNC Lathe Manufacturer: Gildemeister Type: CTX 420 linear V3 Year of Make: 2003 Control: Heidenhain Plus IT Circumferential diameter over bed: 680 mm Circumferential diameter over face slide: 565 mm Plan travel: 260 mm Longitudinal travel: 635 mm Drive power: 40/ 100% 25/37 kW Speed range from – to: 20 – 5000 rpm Weight approx.: 6500 Kg Equipment: Driven tools: 12 stations Tool carrier: 12-cavity Sauter revolver VDI 30 Partial hollow clamps Tailstock Quill stroke automatic Quill holder: Mk 5 Conveyor Measuring arm Oil mist extraction Errors excepted

CNC lathe Type: CTX 510 Ecoline Manufacturer: DMG Year: 2011 Control: Siemens Sinumerik 810D Max turning diameter: 465 mm Max swing over bed: 680 mm Max swing over support: 465 mm X: 300 mm Z: 1050 mm 315 mm 3-jaw hydraulic chuck Max spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% DC): 33/22 kW Max spindle torque (40%/100% DC): 33.5%: 630/420 Nm Maximum rotation speed of driven tools: 4000 rpm Programmable tailstock Tool probe Chip conveyor Suction Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions: 5250 x 2300 x 2000 mm Machine weight: 8000 kg In good condition, under power After repairing the linear line Accessories: Both external and internal tool holders Driven tool holders – direct and lateral Drill holders Hard jaws - 1 set Soft jaws - approx. 10 sets Find more here - / Contact us at -

turning diameter: 500 mm turning length: 800 mm control: Siemens 840D greates pass round over bed: 700 mm Main spindle:: turning speed range - main spindle: 20 - 5.000 min/-1 power capacity - main spindel: 25 / 34 kW max. Torque: 380 Nm C-Axis: 0,01 ° max. chucking diameter: 320 mm milling spindle: milling spindle motor: 22,5 milling head speed: 12000 U/min b-axis: +/- 110 ° tail stock: axis stroke:: x-axis: 480 mm y-axis: +/- 100 mm z-axis: 845 mm feeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/min feed power: 5,6 / 5,6 / 7,4 kN switching time: 30°: 0,4 sec turret:: number of toolpositions: 24 pos. tool taper: HSK A 63 total power requirement: - kW weight of the machine ca.: 10 t NC - turning and milling center - CNC control Siemens 840D Ergo Pro - Milling head with B-axis - Y axis - Coolant system (through Spindle) 15bar with paper band filter - chip conveyor - Tailstoc ...

DMG MORI NLX2500/700 with tool drive and C-axis Universal lathe with 3-axis Turning length 700 mm Main spindle with integrated motor spindle ISM (rod diameter in mm) Hydr. Clamping devices, clamping cylinders, chucks C-axis with hydr. Spindle brake 10-speed BMT star revolver 10-speed tool drive NC tailstock CELOS with Mitsubishi control M730UM

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® toolsDrive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper HSK-A 63Toolchanger with set up station for tool loadingNumber of tools 30Clamping System HSK-A 63IoTconnectorIoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETservice)NETserviceNETservice Qualified support by Internet-based remote diagnosticsMessenger V4Messenger V4 Clear presentation of the machine live status.Service AgentService Agent Overview of  ...

x-axis: 675 mm z-axis: 1530 mm y-axis: 300 mm control: CELOS ERGOline turning speed range - main spindle: 4000 min/-1 spindle passage: 91 mm spindle motor: 18,5 / 15 kW speed range - counter spindle: 4000 min/-1 : 76 tool length - max.: 400 mm tool diameter: 130 mm no. of tools in turret 1: 12 milling head speed: 12000 U/min milling spindle - taper: Capto C6 milling spindle drive: 22 kW total power requirement: 88 kVA total wight: 18,2 t dimensions of the machine ca.: - m Equipped with: - CELOS ERGOline CNC control - Main and counter spindle with 4000 rpm, 91 mm passage - Kitagawa 304 mm chuck - Milling spindle with Capto C6 and 12,000 rpm, 22 kW - 76-position tool changer - Counter spindle with tailstock function - Manual tool presetter - High-pressure coolant system / IKZ 70 bar - Coolant gun - Chip conveyor - Oil skimmer - Oil separator - Renishaw Power On: 17700h, Machining: 7200h  ...

Swing diameter over bed/cross slide: 600mm/410mm, turning length: 1190mm, travel X/Z: 320mm/1250mm, speed: 3000rpm, spindle bore: 75mm, torque: 785Nm, tailstock taper: MK5, tool stations: 8, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 5000mm/2000mm/2200mm, weight: approx. 5500kg, control: Siemens Sinumerik 840D powerline, operating hours: 22407h. Including conveyor and chip breaker. Documentation available. An on-site inspection is possible.

turning diameter: 200 mm turning length: - mm control: DMG total power requirement: kW weight of the machine ca.: 5200 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine name: 3D Printer Manufacturer: DMG MORI Model: Lasertec 30 SLM Year of construction: 2018 Condition: as good as new (used)

DMG Mori Seiki LaserTec 50 FineCutting Sauer Laser Machine YOC 2010 Control: Siemens 840 D Power Specifications Max. travel X-axis 540 mm Max. travel Y-axis 500 mm Max. travel Z-axis 700 mm 5-axis laser precision machine for machining diamond tools up to Ø 355 mm and 420 mm in length • Linear actuators in X / Y with an acceleration > 1 g • Highly dynamic torque motors in both rotary axes (B and C axis) • Compact machine design with only 4m² floor space + Keller exhaust air extraction system

CNC controller: Mitsubishi M730UM (CELOS - ERGOline Touch) Capacity X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Swing over cross-slide mm: 740 Bar work capacity mm: 80 Tool magazine Magazine places: 20 Tool holder: BMT40 Upper turret Number of tool slots St .: 20 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid Feed Rate: 30 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18.5/18.5/15 (25%ED/50%ED/cont) Maximun torque Nm: 49 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11/7.5 (25%ED/cont) Maximun torque Nm: 22 Counter spindle travel mm: 734 Coolant system Tank capacity liter: 366 Equipment Electronic Handwheel Chip conveyor Signal lamp H ...

turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...

turning diameter: --- mm turning length: --- mm control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8838 Type: DMU 60 Producer: DMG Generated: Parameters: Control system: HEIDENHAIN TNC 426 PB Switch-on hours: 92023 h Hours: 33297 h Work table length: 630 mm Work table width: 500 mm Maximum table load (even): 500 kg X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Machine weight: 7500 kg

GeneralUniversal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal800 mmCross1050 mmVertical850 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minTool changerApplicationUniversal Tool changer planehorizontal Type of magazineWheel Type of gripperDouble gripper Number of tools123 Coolant supply ICSCoolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoreticChip removalChip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm /  ...

GeneralVertical Machining Center; Control: Control SIEMENS 828D CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWSpeed max.12000 rpmDrive power (100% DC)9 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D150 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

Key data: 500 mm, 400 mm, 400 mm

DECKEL DMU 50T Heidenhain Control LE 412M Year of manufacture 2001 16-speed tool changer Working area 500 x 400 x 400 mm Feeds 5000 mm/min, rapid traverses 12000 m/min Direct displacement measuring system with rotary encoders (axes are displayed on the screen) Spindle speed max. 9000 rpm Rotary table B- and C-axis Coolant treatment El. Handwheel TFT Monitor Very good condition! If you have any questions, please feel free to contact Mr. Zölch directly: Tel. 0174-9119460 A viewing is possible by appointment. Second-hand goods are sold outside the warranty. Bought as seen. No returns.

x-travel: 3.400 mm y-travel: 3.400 mm z-travel: 1.600 mm Control: CELOS 840D sl Op Siemens Main spindle:: max. spindle speed: 20 - 15.000 min/-1 power capacity - main spindel: 52 / 42 kW tool taper: HSK-A100 max. Torque: 404 / 280 Nm swivellable: B: -30° / +180 ° NC-Rotary table:: table diameter: 2.500 x 2.000 mm max. table load: 10.000 kg table speed: 5 min/-1 distance spindle center to table: hor.: 130 - 1.730 mm distance spindle center to table: vert.: 230 - 1.830 mm distance spindle nose and table: hor.: -1.500 - 1.900 mm distance spindle nose and table: vert.: -1.600 - 1.800 mm Tool-Presetter:: type: 5x Rad- / Wheel number of toolpositions: 303 pos. max. tool diameter: 110 mm max. tool-dia with free toolbox: 280 mm max. tool length: 900 mm max. tool weight: 45 kg tool changing time: 7,5 sec tool taper: HSK-A100 feeds:: rapid traverse: 60 / 30 / 40 m/min total power requirement ...

x-travel: 800 mm y-travel: 700 mm z-travel: 550 mm Control: Heidenhain TNC 530 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Work piece up to 1530 x 1295 x 3500 Kg - Tool size up to 650 mm length and 30 Kg - Tool size up to 400 x 250 mm and 30 Kg - Extende feed rate up to 15 kN-100% ED - Coolant Filtration     - BLUM Laser NT - 3D Quick ser - MPC protection - 3D Measuring probe - DXF Import   - Tool package 180 Tool HSK-100A - 2 x Cast iron angle plates 1500 mm   - 15000 Working hours - 1e owner machine 

turning diameter: 400 mm turning length: 1100 mm control: Siemens Sinumerik 840D SL greates pass round over bed: 500 mm Swing dia. over traverse guideway: 370 mm Main spindle:: Max. rpm: 5000 min/-1 power capacity - main spindel: 17 / 25.5 kW max. Torque: 345 Nm spindle diameter in front bearing: 130 mm spindle bore: 67 mm chucking diameter: 325 mm spindle nose: A8 axis stroke:: x-axis: 750 mm y-axis: +/- 100 mm z-axis: 1200 mm feeds:: rapid traverse: 40 / 40 / 40 m/min Tailstock:: tailstock: 1200 mm taper of center: Mk 5 tension force: max. 8 kN milling head: b-axis: +/- 120 ° tool taper: HSK A 63 tool piece magazine with: 60 spindle turning speed - stepless: 12000 U/min spindle motor: 10,5 kW max. torque on the spindle: 90 Nm total power requirement: - kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 4,6 x 2,5 x 2,82 m Equipped with: - Siemens 840D SlimLine / Cel ...

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm control: SIN840D spindle turning speed - stepless: 5 - 10.000 U/min power capacity at 40 % load: 38,00 KW power capacity at 100 % load: 25,00 kW max. torque at 40% / 100% load: 288 / 187 kW spindle diameter in front bearing: mm spindle taper: HSK 100 feed X/Y/Z/-axis: 0 - 60.000 mm/min rapid traverse X/Y/Z: 60,00 m/min feed capacity X/Y/Z: 12,00 kN B - axis: 180 x 0,001 ° rapid travel B-axis: 10,00 U/min size of pallet: 800 x 630 mm table load: 0,80 t C-axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 800 U/min power capacity - table: 13,85 kW max. torque on the faceplate: 1.550 Nm toolpiece magazine: chain magazine: 60 Stück tool diameter: 110 mm wotkpiece diameter with 2 vacant positions: 230 mm tool length - max.: 450 mm weight of tools max.: 30,00 kg total power requirement: 80,00 kW weight of the machine ca.: 18,0 ...

Milling machine DMG DMU 100t BJ 2003 more technical data and more pictures on request

liter capacity: 600 l Pressure of pump: 2 / 3 / 40 bar control: Schütze / Contactors total power requirement: 11 kVA weight of the machine ca.: 450 kg dimensions of the machine ca.: 1,80 x 1,35 x 1,70 m Coolant System INTERLIT (DMG) - BFA 600-A/40/2/3 50/60 HZ - Very good condition - Connected to DMU 50 3rd Edition - Controllable via contactors - Incl. paper belt filter - Number of pumps: 3 - Pump capacity: 0.63 kW, 2,750 rpm (50 Hz), 60 l/min, 20 m 2.89 kW, 3.75 HP, 2,880 rpm (50 Hz), 24/22-30/27 l/min 3.10 kW, 4.20 HP, 2,930 rpm (50 Hz), 160 l/min, 40 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 390 mm turning length: 2250 mm control: Sinumerik 840D swing diameter: 610 mm cross movement. (x-axis): 605 mm longitudinal traverse (z-axis): 1.870 mm y-axis: 210 mm b-axis: 240 ° Axial travel (X2) / Longitudinal travel (Z2): 267/1.840 mm Longitudinal travel (Z3): 1.840 mm main spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: max 82 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 82 mm Diameter in front bearing: 180 mm Counter spindle: - clamping chuck diameter: 250-315-400 mm bar material dia.: 92 mm spindle head: Ø 220H5 spindle bore: Ø 118 mm Clamping tube inner diameter: 104 mm Diameter in front bearing: 180 mm Main spindle drives left and right: - power requirement: 45/47 kW speed area: 20 - 3.200 1/min Buckling speed: 650 1/min torque: 650/ 1.080 Nm C-axis speed: 3.200 1/min Torque C-axis: 660 1/min Partial  ...

Travel X/Y/Z: 600mm/700mm/800mm, resolution: 0.001mm, input resolution: 0.001mm, positioning tolerance: 0.01mm, feed rate: 15m/min, rapid traverse: 40m/min, speed: 18000rpm, power: 31kW, control: Heidenhain MillPlus. Documentation available. On-site inspection is possible.

5-Axis Universal Machining Center DMG Mori ecoMill 50 Control: Heidenhain TNC 620 Year of Make: 2016 Travels: X-axis 500 mm Y-axis 450 mm Z-axis 400 mm B-axis °-5/+110 C-axis °360 Clamping surface rotary axis: Ø 630 x 500 mm Mount: SK 40 Tool Magazine: 32 Slots Speed: 12,000 rpm Accessories - Chip conveyors - 3D Probe Infrared - Table button