dmg eco used for sale

This DMG DMU 40 evo Vertical Machining center was made in 2012 in Germany and has 22398 production hours. It is equipped with a HEIDENHAIN 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm.

This DMG SAUER LASERTEC 50 5-axis laser precision machine was manufactured in the year 2010 in Germany. It is currently still in production but with direct availability. It is in a very good condition with in total 81,142 machine on hours and 14,393 cutting hours. The machine comes with a LASAG FLS 352 A laser (2011), a Keller L-CUT-1-P2-B60-V extraction system (2010) and a KKT OLB 10 SA chiller (2014). See attached the original tech specs as PDF in German.

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mMovement X / Y / Z550/550/510 mmRapid feed X / Y / Z24/24/24 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

This DMG DMU70 Vertical Machining center was manufactured in the year 2007 in Germany and has 45808 production hours of which 25900 are spindle hours. It is equipped with a HEIDENHAIN 530 control unit and has 3+2 axis. The machine has a spindle speed of 12000 rpm.

This DMG DMU 105 MonoBlock Universal Machining center machine was manufactured in the year 2013 in Germany and has 24687 spindle hours. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit. It disposes of a scraper belt chip conveyor and a vertical chain magazine basic with 60 magazine slots. See original order confirmation (German) as PDF attached for more details.

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 KgMechanical preparation for Oil-Mist Extractor UnitMechanical preparation for Oil-Mist Extractor Unit (opening diameter: D200 mm)SK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Working areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmBar diameter max.80 mmTurning diameter400 mmSlide 1Longitudinal stroke830 mmTransverse stroke271 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)630 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,30 x 2,43 x 1,94) mWeight approx. ...

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis - Direct measuring system for X / Y axis; Control: DMG MORI SLIMline® multi-touch control Slide 1Longitudinal stroke830 mmTransverse stroke271 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y22,5 m/minWorking areaSwing diameter over guide ways700 mmSwing diameter over transverse guideway370 mmTurning diameter400 mmBar diameter max.80 mmMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmC-Axis Speed-200 rpmMax. torque (40% DC)426 NmTorque of C-Axis (holding torque)630 NmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,30 x 2,43 x 1,94) mWeight approx. ...

Key data: 500 mm, 400 mm, 400 mm

1 universal milling machine Deckel-Maho DMU 50 T built in 2003 Training machine only 300 hours as good as new Control Heidenhain Mill-Plus IT Spindle speed 20-9000 rpm SK 40 Travel X/Y/Z 500 mm x 400 mm x 400 mm 16-fold tool changer Manual swivel rotary table with display in the control C&B axis electr. Handwheel, Infarot Measuring Device

CNC lathe Manufacturer: Gildemeister Type: CTX 620 Linear V3 Year of construction: 2007 Control: Heidenhain IT Circulation diameter: 800 mm Drive power: 40%/100% ED 43/33 kW Speed range from – to: 20-2500 rpm Weight approx.: 9600 Kg Equipment: Axes: X,Z,C axis Powered Tools: Yes Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mount: MK5 Chip Conveyor: Yes Very good condition. Errors excepted

CNC lathe Manufacturer: Gildemeister Type: CTX 410 V3 Year of construction: 2006 Control: Heidenhain IT Circumferential diameter: 505 mm Drive power: 40%/100% ED 28/21 kW Speed range from – to: 25-5000 rpm Weight approx.: 5600 Kg Equipment: Axes: X,Z,C axis Tool carrier: 12-speed turret Tailstock: Yes Quill Stroke Automatic: Yes Quill mounting: MK4 Chip Conveyor: Yes Very good condition. Errors excepted

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- - -: - - - - - - - - -: - - - - - - - - -: - - - - - - Turning Automatic Lathe - swiss lathe | DMG - SPRINT 42 linear The machine is in a well-maintained condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sprint42 | Sprint-42 | 42linear The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: CNC SIEMENS SINUMERIK 840D with DMG MORI SLIMLine Multi-Touch Control Max. workpiece diameter: 700 mm Max. workpiece length: 1,240 mm Max. bar clearance: 80 mm Max. X-axis: 308 mm Max. Z-axis: 1,240 mm Driven tools VDI40 Spindle speed: 3,250 rpm Tool speed 4,000 rpm. 3- Jaw chuck Kitagawa B-210 Hydr. tailstock, handwheel, chip conveyor, extraction system, door automation, High Pressure Pump

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm b-axis: -30/+120 ° c-axis: 360 ° spindle turning speed - stepless: 12000 U/min weight of the machine ca.: 12.8 t dimensions of the machine ca.: 303 x 395 x 367 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: With interchangeable holders SK 40 SK 50 Reference setting mandrels DYMO label printer weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,500 mm

Control: Heidenhain iTNC 530 x-travel: 450 mm y-travel: 400 mm z-travel: 480 mm b-axis: -95/+30 ° c-axis: 360 ° spindle turning speed - stepless: 12000 U/min weight of the machine ca.: 4.5 t dimensions of the machine ca.: 2.4 x 3.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with CNC control, Fabr. SIEMENS, type: SINUMERIK 840D POWERLINE, turret with 12 tool positions, max. speed: 4000 rpm, number of axes: 3, max. circulation diameter: 300 mm, max. turning diameter: 300 mm, max. turning length: 300 mm, with a workpiece loading system, Fabr. EWAB

Key data: 2600 mm, 1100 mm, 900 mm

Inv. Num. : 4504 Type: DMF 260/11 KGT Producer: DMG MORI Created: 2016 Parameters: Control system: Heidenhain iTNC530 Duty cycle: 6965 h Hours: 13099 h Work table length: 3200 mm Work table width: 1100 mm Maximum table load (uniform): 4000 kg Spindle drive power: 14 kW X-axis travel: 2600 mm Y-axis travel: 1100 mm Z-axis travel: 900 mm Spindle speed: 8000 1/min Tool holder: SK40 Machine weight: 26850 kg Equipment: IKZ Digital Probe Conveyor 2020: New spindle and ball screw (axis X and Z)

Control Heidenhain MillPlus Travel X/Y/Z: 630/560/560 mm Spindle speed 12,000 min-1 Magazine for 20 tools SK 40

This DMG CMX 1100 V Machining center (vertical) machine was manufactured in 2018 in Italy. This machine has a table size of 1400 x 560 mm. The spindle operates at speeds up to 12000 rpm with a power output of 13 kW. It features a tool capacity of 30 tools and includes a Renishaw probe, optical scales, and tool presetting functionality. Contact us anytime for further information.

Description: Equipment: Measuring systems: Direct in all axes (glass scales) Chip removal: Chip conveyor Coolant supply: IKZ system, 40 bar Workpiece measurement: Infrared measuring probe (broken according to photos) Set-up mode: Electronic handwheel Process monitoring: Operating mode 4 Emulsion mist separator: Electrostatic extraction, W+W EL-FI 1000 Further Equipment: Rotary table, Visiport z-motion: 720 mm, max. workpiece weight between centers: 3,000 kg, x-motion: 3,000 mm, y-motion: 560 mm, control: Heidenhain iTNC 530, table surface area l x w : 3400x600 mm, taper: SK 40, toolchanger positions: 100, power capacity - spindle: 35 kW, spindle torque: 130 Nm, turning speed range: 12.000 rpm, total power requirement: 35 kW, weight approx.: 17,000 kg, Approx. Onsite Dimension. (l x w x h): 10,000 x 4,500 x 3,000 mm

This 3-Axis DMG MORI CLX 450 V4 was manufactured in 2020 and features advanced technology cycles like drilling, threading, and grooving, along with a main spindle speed of 4,000 rpm. Its equipped with a turret that includes 12 driven tools and 6 BT stations, and boasts a direct measurement system in X and Y axis with a Y-axis range of +/- 60mm. Control is managed by the sophisticated SIEMENS 840D. Buy this DMG MORI CLX 450 V4 lathe to leverage its precision capabilities. For further details, please contact us.

x-travel: 1600 mm y-travel: 1250 mm z-travel: 1000 mm Control: HEIDENHAIN TNCi 530 tool taper: HSK-A63 spindle turning speed range: 18000 U/min table dimension - cross: 1250 mm table dimension - longitudinal: 1500 mm rapid traverse: 60 m/min feed: 20-15000 mm/min workpiece weight: 4000 kg table turning speeds: 10 U/min Tools changer: 60 pos. handwheel: el. Machine on: 49248 Spindle hours: 13157 total power requirement: kW weight of the machine ca.: 34 t dimensions of the machine ca.: 8800 x 8800 x 3500 m he DMU 160P is in very good condition and can be inspected under power at the sellers premises. under power at the sellers premises. The machine has mainly been used to mill plastic and otherwise aluminium. Description: Spindle HSK63 18.000 1/min approx. 1.000h Minimum lubrication inside/outside Blowing air inside/outside coolant from the outside Tool magazine 60-fold Measuring probe Hei ...

We are offering our Gildemeister 200S for sale. However, after some power parts were replaced, we were no longer able to put the machine into operation. All defective parts were replaced by DMG. The machine can be inspected at any time. Details of the machine: Year of construction: 2007 Control: Siemens 840D Tool holder: HSK63 Tool places: 32 Equipment features: Chip conveyor High pressure pumps Paper belt filter Suction unit Chip flushing gun Tool holder 3-jaw chuck [diameter: 315 mm] from SCHUNK 3-jaw chuck [diameter: 260 mm] from SCHUNK For further information or an inspection, please do not hesitate to contact us.

This DMG MORI GMX 200 Linear Lathe was manufactured in the year 2004 in Germany and has 23500 spindle hours. It is equipped with a SIEMENS 840D powerline control unit with an Ethernet interface. The machine disposes of a main drive counter spindle which has a speed range of 5000 rpm, a main spindle left and a turning/milling spindle which has a speed range of 12000 rpm, a couple of hydraulic three-jack chucks and cooling tank with cleaning with belt filter and a spray gun. It has a differential pressure for main spindle and for counter spindle.

: 6 Messuhren : nur : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralCharacteristicsTable surface850 x 650 mmWeight approx.5600 KgDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minSpeed max.10000 rpmMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque64 NmTorque (100% DC)43 NmDrive power (100% DC)9 kWDrive power (40% DC)13 kWTropical PackageTropical Package Option includes: - Active cooling unit for electrical cabinet - Additional ventilator for control panel Recommended from 35°C to max. 45°C environmental temperatureSK40 interfaceTool clamping SK 40 for pull-studs DIN 69872Electronic HandwheelExternal electronic Handwheel

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsSpeed max.12000 rpmDrive power (100% DC)9 kWDrive power (40% DC)13 kWDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmWeight approx.5600 Kg

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Rapid feed X / Y / Z24/24/24 m/minTool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmDimensions (L x W x H)3,07 x 2,67 x 2,84 m

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmMax. torque83 NmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 Kg

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmTorque (100% DC)57 Nm

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmMovement X / Y / Z550/550/510 mm

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 Kg

CharacteristicsTable surface850 x 650 mmWeight approx.5600 KgDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmTool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmSpindle taperBT 40 GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmTool Magazine with24 PositionsSpindle taperBT 40 Max. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 Kg

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface850 x 650 mmDimensions (L x W x H)3,07 x 2,67 x 2,84 mRapid feed X / Y / Z24/24/24 m/minMovement X / Y / Z550/550/510 mmSpindle taperBT 40 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmWeight approx.5600 Kg

GeneralVertical Machining Center; Control: Control SIEMENS SINUMERIK ONE CharacteristicsTable surface1400 x 600 mmWeight approx.6950 KgDimensions (L x W x H)2,74 x 2,74 x 2,86 mMovement X / Y / Z1100/550/510 mmSpindle taperSK 40 DIN 69871 Tool Magazine with24 PositionsMax. torque83 NmTorque (100% DC)57 NmDrive power (40% DC)13 kWDrive power (100% DC)9 kWSpeed max.12000 rpmRapid feed X / Y / Z24/24/24 m/min

5-Axis milling machine manufactured in 2013, the DMG DMU 80 P Duoblock offers precision milling capabilities, ensuring reliability and accuracy while meeting a wide range of manufacturing needs. Contact us for further information on the DMG DMU 80 P Duoblock machine we have for sale.

This 5-Axis vertical machining centre was manufactured in 2014. The DMG MORI DMF 260/11, equipped with a Heidenhain iTNC 530 HSCI control, boasts a rigid table with an integrated rotary axis, offering precision and versatility. With a swivel head and 10,000 rpm B-axis spindle, it ensures efficient machining of complex parts. Additional features include an infrared measuring probe for accurate measurements and a spray gun for swarf removal. Experience enhanced productivity with this reliable machine center. Contact us for further information.

General2-axes universal turning center with driven tools and C-axis; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed550 mmSwing diameter over X linear guideways320 mmMax machining diameter300 mmClamping chuck Ø210 mmX travel232,5 mmZ travel410 mmMain drive 1Type of main driveAC Drive power (100% DC)9 kWDrive power (40% DC)11,7 kWSpeed range-4500 rpmTorque (100% DC)108 NmMax. torque (40% DC)140,4 NmWork spindleSpindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmSpindle noseA2-6 Tool holder 1Number of tool stations12 Number of driven tools12 Speed max.5500 rpmPower max. (40% DC)5,44 kW

5-axis vertical machining centre manufactured in 2014 with immediate availability. This DMG MORI DMF 360/11 machine offers a rigid table with an integrated rotary axis, a swivel head B-axis, and a high-speed spindle. The control system is a 3D-control Heidenhain iTNC 530 HSCI, which provides accurate and efficient machining. The DMF 360/11 also features an infrared measuring probe, a tool laser measuring system, and a manual control panel. The opportunity to buy this DMG MORI DMF 360/11 vertical machining centre is now available. Contact us for more information on this exceptional machine.

Inv. Num. : 7515 Type: SL-65B Producer: DMG MORI SEIKI Created: 1992 Parameters: Control System: FAPT/Fanuc MF-T5 Hours: 8700 h Maximum turning length: 790 mm Max. turning diameter: 450 mm Minimum spindle speed: 4 1/min Maximum spindle speed: 1010 1/min Travel X: 350 mm Z travel: 860 mm Number of synchronized axes: 3 pieces Tool magazine: 12 pieces Engine power: 56 8 kW Rapid traverse of the X and Z axes: 5000/8000 mm/min Maximum feed speed axis X: 1260 mm/min Maximum feed speed axis Z: 1260 mm/min Length: 3660 mm Width: 1950 mm Height: 2320 mm Weight: 9140 kg Equipment: Kitagawa B-18 Chuck

Description: Max cutting diameter: 386mm Max cutting length: 515mm Bar capacity: 52mm XYZ: 260 x 100 x 590mm Main spindle: 6000 rpm/7.5/11kw Milling: 10,000 rpm 12 turrets Milling holders Turning blocks Gantry Loader GX-05 AIV type Chip conveyor Includes shipping to any major seaport in the world. control: Mitsubishi M730UM with CELOS, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,100 x 2,200 mm, weight approx.: 5,400 kg

Description: Max cutting diameter: 386mm Max cutting length: 515mm Bar capacity: 52mm Main spindle: 6000 rpm/7.5/11kw Milling: 10,000 rpm 12 turrets Milling holders Turning blocks Gantry Loader GX-05 AIV type Chip conveyor Includes shipping to any major seaport in the world. control: Mitsubishi M730UM with CELOS, Approx. Onsite Dimension. (l x w x h): 3,600 x 2,100 x 2,200 mm, weight approx.: 5,400 kg

This 4-Axis milling machine was manufactured in 2016. The DMG MORI DMF 260-11 KGT offers exceptional precision and efficiency. With a rapid traverse of up to 80m/min and optimised tool exchange times, it maximizes productivity. Notably, it boasts a 15% greater chip removal volume and reduced chip-to-chip times. Its sturdy construction and mineral composite bed ensure stability and rigidity. This DMF series machine represents a remarkable opportunity for machining tasks. Contact us for further details.

Key data: 350 mm, 650 mm, 25 1/min

well-preserved, used NEF 400 Siemens Sinumerik 840 D control system Year of construction 2007 Switch-on hours 16000 h incl. 3-jaw wedge bar chuck Röhm Spindle bore 79 mm Turret 8 positions Rapid traverse X-axis 20 m/min Rapid traverse Z-axis 24 m/min Drive power - spindle motor 11.5 kW Tailstock displacement 550 mm Pick-up cone in the tailstock quill MK4 Quill diameter 80 mm

Description: Highlights CN HEIDENHAIN Spindle speed rotation max: 6000/5000 rpm Power-on time: 30981h Working hours: 7998h Bar feeder SAMSYS+ Type M300 YOM: 2010 , Dimensions of bar feeder: 1900x1000x1400mm - Optimum machining of compact workpieces up to 410 mm turning diameter - Generously dimensioned modules (size 45 guideways), high stability, long service life - New design for optimum ergonomics, with large windows for optimum visibility in the work area and of the machining in progress - X-axis glass ruler for maximum precision - Direct measuring system (no need to move the reference point) - C-axis tailstock and driven tools as standard - User-friendly ERGOline Contro CNC with 19''-TFT Wide Screen, DMG SOFTkeys freely available Basic machine: CTX beta 800 Universal 2-axis lathe, Turning length 800mm - Main spindle: integrated motor spindle - Drive power 25/34 KW (100/40% ...

Key data: 600 mm, 1200 mm, 25 1/min

well-preserved, used NEF 600 Siemens Sinumerik 840 D control system Year of construction 2006 Switch-on hours 20000 h Conveyor Power chuck Schunk Spindle bore 90 mm Turret 8 positions Motor power 18 kW Machine weight 5000 kg Machine dimensions LxWxH 3600x2140x1845 mm Manual Can be tested under power Prices do not include VAT (domestic). The sale of used machines is carried out under exclusion of any warranty and guarantee for overt and hidden defects. Prior sale, changes and errors in the technical data and information reserved.