dmc 60 used for sale

Deckel Maho 4-axis CNC milling machine DMC 64 V linear Working Range: - X-axis: 640 mm - Y-axis: 600 mm - Z-axis: 500 mm - With 520 Heidenhain control - With coolant system + paper filter - Probe preparation, but probe is missing - Few operating hours - Machine is first owned - from the production of individual parts of precision parts - All 4 axes can be moved, only the transmitter of the main spindle is defective Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or ...

x-travel: 1040 mm y-travel: 600 mm z-travel: 500 mm Control: Heidenhain iTNC 530 table surface area: 1250 x 600 mm table load: 600 kg tool taper: SK 40 spindle turning speed range: 1 - 8000 U/min max. torque on the spindle: (S1/S6) 140/200 Nm feed range: 40000 mm/min rapid power traverse in X-and Z direction: 70 m/min rapid motion - y-axis: 40 m/min spindle drive: (100/40 % ED) 13/19 kW total power requirement: 39 kVA weight of the machine ca.: 8,9 t dimensions of the machine ca.: m Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR ...

x-travel: 1.000 mm y-travel: 1.000 mm z-travel: 1.000 mm Control: HEIDENHAIN iTNC 530 rapid travel x/y/z: 60.000 mm/min feed: 10.000 mm/min NC table: numbers of pallets: 2 Stück size of pallet: 1.000 x 800 mm weight with floor-plates: 1,5 t c-axis: Tisch 0.001º 0 table speeds: 10.3 m/min spindle: kW a-axis: 0,001 ° tool adaptor: HSK 63 spindle drive: 26,9 kW spindle turning speed range: 24.000 U/min tool change unit: 120 pos Internal cooling system: 80 bar chip conveyor: Inkl handwheel: Inkl total power requirement: 69 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 5.351 x 4.378 x 3.400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm CNC-control: HEIDENHAIN TNC620 table-size: 1200 x 560 mm max. table load: 1000 kg spindle taper: SK 40 spindle turning speed range: 10.000 U/min drive capacity - spindle motor: 13 kW feed stepless: 20.000 mm/min rapid traverse: 25 m/min tool change unit: 20 Pos. coolant: IKZ 20 bar voltage: 400 V total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 2,55 x 2,30 x 2,25 m chip conveyor: 3,90 x 0,95 x 1,60 m coolant tank: - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 640 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 64 V linear With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 640 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions 3D Probe Renishaw Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

Year of manufacture 2010 TOP condition! Siemens Control Spindle 18000 rpm 10610 Spindle hours Tool changer for 30 tools IKZ el. Handwheel Chip conveyor

This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details.

The machine is in good technical condition; testing is possible by prior arrangement. A probe is included.

Key data: 800 mm, 800 mm, 800 mm

DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Interchangeable Table – Used For sale is a used DMG MORI DMC 80H duoBLOCK horizontal machining center. The machine is currently still in productive use and is reliably used in series production. It is mainly used for processing steel and cast iron. Condition: Fully functional and operational. Viewing under power possible by arrangement. Equipment: 4-axis machining Horizontal design for efficient chip removal Changing table (pallet changer) for reduced non-productive times duoBLOCK design for high stability and precision Tool Changer Generous working space for complex components Further details on the equipment are available on request Control manufacturer: Siemens Control model: Sinumerik 840D Workpiece weight (max.): 1,200 kg Total height: 3,100 mm Overall length: 4,850 mm Overall  ...

DECKEL MAHO DMC 63 V CNC vertical machining center was built in 2003 in Germany by DECKEL MAHO Geretsried GmbH. The machine has been regularly serviced and maintained throughout its entire service life. As part of the service work carried out, the CNC controller power supply, the coolant pump in the cooling system and the Y-axis cover scrapers were replaced. The gripper clamping force was adjusted and a new spindle covered by a one-year warranty was installed. The DECKEL MAHO DMC 63 V is designed for precision milling, drilling and threading of metal workpieces. Machining is performed by a spindle cooperating with an automatic, 24-position tool magazine. The spindle, driven by a high-power motor, reaches a maximum speed of 10000 rpm. The tool measuring probe, together with the readout system supports correct tool setting, ensuring high precision of the operations performed. All proces ...

Incl. tool changer and the tool holders located inside, with chip conveyor and coolant system. Attention: The machine can be transported on a standard truck! Additional technical specifications: • Nominal current: 80 A • Table: with 9 slots • attached clamping plate, dimensions: 1200 x 810 mm • with three ALLMATIC machine vices, jaw widths: 160 mm

Incl. chip conveyor, incl. 3-D touch probe and incl. the tool holders located in the tool changer! Attention: without the machine vises seen in the photos! Attention: the machine can be transported on a standard truck!

Attention: The machine can be transported on a truck up to 3000 mm wide! Additional technical specifications: • table with 5 slots • with mounted plate, plate dimensions: 900 x 550 mm • incl. vise, jaw width: 125 mm

The machine is in good technical condition; testing is possible by prior arrangement. Spindle speed: 12,000 rpm. Travel ranges: Z 510 mm, Y 510 mm, X 835 mm. Feed rate: 30 m/min. Tool holder: SK 40. Tool magazine capacity: 30 stations. Table load capacity: 800 kg. Table dimensions: 1000 x 560 mm. Overall dimensions including chip removal system: approx. 4300 x 2500 mm (footprint). Machine weight: approx. 4450 kg. Coolant system with belt filter unit, 20 bar. Maintenance/repair history: -Tool changer adjustment: 11/2025 -Coolant rail: 11/2024 -Coaxial valve, power chain: 10/2024 -X-axis ball screw replacement, new motor belt, new lubrication dispenser: 10/2024 -HDD: 7/2023 -X-axis cover plate: 2/2023 -Rotary union: 4/2022 -Gripper set: 5/2022 -Spindle braking resistor: 5/2022 -Spindle refurbishment by Vopss: 10/2020

Key data: 1000 mm, 800 mm, 500 mm

Technical Specifications • CNC Control Unit: DIALOG 112 • Axis Travels (X, Y, Z): • X-axis: 1000 mm • Y-axis: 800 mm • Z-axis: 500 mm • Work Table: • Table dimensions: 1250 x 800 mm • Maximum table load: 1200 kg • Spindle: • Tool taper: SK 40 / HSK-A63 (depending on configuration) • Maximum spindle speed: 15,000 rpm (up to 18,000 rpm for hi-dyn versions) • Spindle drive power: approx. 10 / 15 kW • Tool Changer (ATC): • Magazine capacity: 30 positions (some variations have 60) • Max. tool weight: 12 kg

GeneralVertical-Machining centre Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal1450 mmCross700 mmVertical550 mmTool changerType of magazineWheel Type of gripperDouble gripper Number of tools30 TableTable surface 1760 x 750 mmMaximum load (table centre) 2000 KgSlot width 14 mmNumber of Slots 7 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 30 pockets HSK-A63Tool magazine 30 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct tool loading into the tool magazin ...

Key data: 850 mm, 520 mm, 475 mm

CNC Vertical Machining Center DECKEL MAHO DMC 850 V With track control Heidenhain TNC 640 Year of Make: 2016 Travel: X 850 Y 520 Z 475 Speed range: 0 – 20,000 rpm infinitely variable With the following accessories: Rigid angle table 1160 mm x 575 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) 3 D Probe Heidenhain TS 649 Electronic handwheel LED light strip Polycarbonate Safety Lenses Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 Sealing air for linear measuring systems Spindle Oil Cooler Chip conveyor Chip flushing Swarf Spray Gun Coolant device (reinforced coolant pump) 4 Height Adjustable Machine Shoes Operating Instructions

x-travel: 1.035 mm y-travel: 560 mm z-travel: 510 mm control: 810 D 3D ShopMill Siemens Main spindle:: turning speed range - main spindle: 20 - 8.000 min/-1 power capacity - main spindel: 13 / 9 kW max. Torque: 83 / 57 Nm tool taper: SK 40 DIN 69871 work table:: table surface area: 1.200 x 560 mm max. table load: 1.000 kg table height over floor: 720 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm change time: 1,6 sec change-time chip to chip: 7,0 sec feeds:: rapid traverse: 25 m/min total power requirement: 17 kVA weight of the machine ca.: 4,1 t dimensions of the machine ca.: 4,0 x 4,0 x 2,5 m Chip conveyor: Automatic Tool Changer: Coolantsystem: Spray gun: elektr. hand wheel: Signal-Light: CNC - Machining Center Vertical DECKEL MAHO - DMC 1035 V Ecoline - only 2,300 spindle hours  ...

Key data: 635 mm, 510 mm, 460 mm

Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Engine No.: 1537000170A Year of Make: 2009 Control: Siemens 810D Shopmill Axles: 3 Travels X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 places SK 40 Speed: 20-8,000 rpm Drive power: 13/9 kW (40/100%ED) - Direct displacement measurement system X,Y,Z - Sealing air for measuring systems - Coolant blowing air switching - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

• Deckel Maho DMC 63V; Year: 2001; 8200 spindle hours; Very good condition, freshly checked and ready for shipment • DMG DMC 635 V ecoline; Year: 2013; approx. 2800 spindle hours; Very good condition immediately available • Mazak QT 200 MSY built in 2024; Spindle hours: approx. 500h

Key data: 1040 mm, 600 mm, 500 mm

CNC Vertical Machining Center DECKEL MAHO DMC 104 V linear With track control Heidenhain iTNC 530 Year of Make: 2005 Travel: X 1040 Y 600 Z 500 Speed range: 0 – 12,000 rpm infinitely variable With the following accessories: Rigid angle table 850 mm x 600 mm clamping surface Vertical tool changer with 30 magazine positions ( SK 40 ) NC Dividing head with tailstock Electronic handwheel Full protection cabin with sliding doors and interior lighting Operating mode 3 + 4 IKZ 40 bar Chip conveyor Rotoclear Swarf Spray Gun Spiral chip auger Coolant Setup 3 Height Adjustable Machine Shoes Operating instructions

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump NC rotary table with pallet changerType of Measuring system Direct measurin ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump NC rotary table with pallet changerType of Measuring system Direct measuring ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pump NC rotary table with pallet changerType of Measuring system Direct measuring syst ...

GeneralUniversal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmFloor space/WeightWeight approx.17800 KgDirect measuring systemDirect path measuring system CabineFull protection cabin Package Mill / Turn HSK-A 63Package Milling / Turning: Upgrade NC-swivel rotary table to Milling - Turning / direct drive Pallet C-axis d 630 mm / 24.9 in Speed C-axis 1.000 rpm Integrated balancing senso ...

GeneralHorizontal 5-axis universal machining centre; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal850 mmCross900 mmVertical1150 mmCabineFull protection cabin Motor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSK NC swivel rotary table DirectDrive CNC swivel rotary table direct drive C-axis with pallet carrier Permissible load: 800 kg / 1,760 lbs C-axis: 80 min-1 direct drive A-axis: 15 min-1 single drive Rotation C axis: endlessly turning Swivel range A axis: +120°/-120° (replacement of base mac ...

GeneralUniversal machining centre; Control: Siemens 840D-Powerline ShopMill Classic Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 63 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machining Prod. package 40 bar/23 l/minProduction package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form AD NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 1000 x 800 mmCentre bore 50H6 mmMaximum l ...

GeneralVertical Machining Centre; Control: 3D control Heidenhain iTNC 530 Technical DataFeed rate longitudinal/transverse/vertical1-90000/1-90000/1-90000 mm/minRapid traverse longitudinal/transverse/vertical90/90/90 m/minWorking area 1Longitudinal885 mmCross600 mmVertical600 mmMiscellaneousClamping SystemHSK-A 63 Colour Floor space/WeightDimensions (L x W x H)4,9 x 4,3 x 3,2 mWeight approx.12000 KgCabineFull protection cabin DMC 75 V linear in 5-axes-versionAdditional price DMC 75V linear in 5-axes-version - motion in X=885mm und Z=600mm - spindle speed up to 18.000rpm, - tool-taper HSK-A 63, - swiveling range B-axis +10° to -110°, - swiveling speed B-axis 50rpm, - max. torque 750Nm / 553ft/lbs - clampi Tool magazine 150 pocketsTool magazine 150 pockets Tower type magazine Only available for HSK Tool holders. (differently from standard) Number of tools 150 Preparation measuring probe T ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools30 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 15,000 rpm, 200 NmMotor spindle speedMASTER® SK 40 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle) BIG-PLUS® tools possible Tool magazine 30 pockets SK40Tool magazine 30 pockets SK40 Chain magazine with pockets and with double gripper ...

GeneralVertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-42000/1-42000/1-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minWorking area 1Longitudinal650 mmCross520 mmVertical475 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 TableTable surface 960 x 570 mmMaximum load (table centre) 800 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Tool magazine 60 pockets HSK-A63Tool magazine 60 pockets HSK-A63 Chain magazine with pockets and with double gripper, incl. manually direct ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabin Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63 NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine) Tool magazine ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabin Main driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63 NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine) Tool magazine ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine) Table surface 400 x 400 mmMaximum load (table centre) 500 Kg4. Axes (swivelling range) 360 x 0,001 degreeTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets Motor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active cooling Drive power (100% DC) 28 kWDrive power (40% DC) 34 kWTorque (100% DC) 84 NmTorque (40% DC) 110 NmSpeed ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine) Table surface 400 x 400 mmMaximum load (table centre) 500 Kg4. Axes (swivelling range) 360 x 0,001 degreeTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets Motor spindle 18,000 rpmMain drive: Integrated motor spindle incl. active cooling Drive power (100% DC) 28 kWDrive power (40% DC) 34 kWTorque (100% DC) 84 NmTorque (40% DC) 110 NmSpeed ...

GeneralHorizontal machining centre - Horizontal milling head; Control: CELOS with Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/70000 mm/minRapid traverse longitudinal/transverse/vertical60/60/70 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical900 mmCabineFull protection cabin Direct measuring systemDirect path measuring system NC rotary table with pallet changerType of Measuring system Direct measuring system Table surface 630 x 630 mmCentre bore 50 mmMaximum load (table centre) 900 KgSlot width 14 mmNumber of Slots 5 Distance between T-Slots 100 mmRotation speed max.4. Axis 40 rpm4. Axes (swivelling range) 360 x 0,001 degreePackage recirculation ballscrew spindlePackage recirculating ballscrew spindle X-,Z-axis:max. feed speed: 60.000 mm/min Y-axis: max. feed speed: 70.000 mm/min (basic machine without linear drive X-, Y-, Z-axis)  ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Working area 1Longitudinal560 mmCross600 mmVertical600 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMiscellaneousClamping SystemDIN ISO 7388 CabineFull protection cabin NC rotary table with pallet carrierNC rotary table with pallet carrier permissible load 500 kg / 1,100 lbs (no indexing table 360 x 1° in basic machine) Table surface 400 x 400 mmMaximum load (table centre) 500 Kg4. Axes (swivelling range) 360 x 0,001 degreeTool magazine, chain Vert., 60 pocketsTool magazine Vertical chain magazine with 60 tool pockets SK 40 or optional chosen spindle tapers Motor spindle SK 40 18,000 rpmMain drive: Integrated motor spindle SK 40 Spindle speed max. 18,000 rpm Drive power (100% DC) 28 kWDrive power (40% DC) 34 k ...

BAZ Cover Maho DMC 635V ecoline BJ 2013

Key data: 640 mm, 600 mm, 500 mm

Spindle speed: 12,000 min/1 Spindle hours: 21600h Control: Siemens Year of Make: 2004 3D Buttons Tool holder SK40 30 tool positions

x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm control: TNC 426 table-size: 900 x 550 mm taper ISO: SK 40 speeds: 18000 U/min total power requirement: 50 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3,3 x 2,43 x 2,98 m DECKEL MAHO DMC 70 V Hi-dyn machining center featuring: 30-station tool changer Chip conveyor Oil mist filtration system Transport dimensions: 650 x 243 x 297 cm, 8 tonnes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 640 mm, 640 mm, 640 mm

Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530

Year of construction: 2007 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 1000 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0º/190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Max. workpiece weight kg: 2000 Table rotation speed rpm: 500 max. torque Nm: 5600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 28/19(40/100%DC) Spindle torque Nm: 727/492(40/100%DC) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Chip-to-chip time s: 5 Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Mi ...

Key data: 1250 mm, 1000 mm, 1000 mm

Refurbished by DMG in 2011 Control: HEIDENHAIN iTNC 530 Tool holder SK50 with tool storage for 60 tools Max. spindle speed: 8,000 1/min 30kW spindle with swivelling milling head (B-axis) Infrared probes NC rotary table with pallet change Total weight: 24,000 kg Table load: 2,000 kg

x-travel: 1035 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain iTNC530 total power requirement: siehe Dok. kW weight of the machine ca.: ca.5,2 t dimensions of the machine ca.: siehe Dok. m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center DMG 1035 V ecoline 2010 Siemens 810 D / Shopmill Travel distances : X-axis : 1035mm Y-axis : 560mm Z-axis : 510mm Working spindle : Tool holder SK 40 Speed range max. 10000 rpm Tool magazine : 20 magazine slots Table design : Rigid table 1200 x 560 mm - Chip conveyors - IKZ 20 Bar

Key data: 935 mm, 850 mm, 650 mm

Commissioning 2013 with RS 3 rotary storage tank (3 pallets) Control: Heidenhain iTNC 530 HSCI Approx. 60 tools - SK40 IKZ (internal coolant supply) Total weight: 14,000 kg Spindle speed (max.): 18,000 rpm Number of slots in tool magazine: 60 Table load: 1,000 kg Heidenhain Infrared Probes Blum Laser Measurement 3D Quickset Air Cleaner electric handwheel

Year of construction: 2004 CNC controller: Heidenhain MillPlus IT FD Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º Milling/turning table nc: Number of pallets: 2 Table dimensions mm: Ø1100 Maximum workpiece size (D x H) mm: H=1600 Max. workpiece weight kg: 2000 Table rotation speed rpm: 400 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 120 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool measuring arm Mist collector Machine running times Under power: 92687 Spindle Working: 40245 Basic machine dimensions / weigh ...

GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools183 Motor spindle HSK-A63 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (95 ft lbs / 63 ft lbs) (40 / 100 % duty cycle) Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSK Stop block + 3-point-supportStop block + 3-point-support Design according to DECKEL MAHO Standard Tool magazine, wheel, 183 pocketsTool magazine wheel maga ...

x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.

Scania AT-Motor Type=DC12-60A Pump-Nozzle-Motor with EMS Control max.337KW at 1,800rpm > Fixed speed motor. Incl.Anlasser+alternator suitable for vegetable oil and palm oil. Immediately available from stock! Also suitable for vegetable oil operation. info@miw-zeven.de