dmc 60 used for sale

working width: 600 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 brushing units seperatly adjustable; 1. brush: methal brush, diameter 220mm; 2. brush: tynex brush granulation 80, diameter 220mm; height adjustment: handwheel; read out workpiece thickness: mechankal counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 4 kW; motor power feed: 0,37 kW; machine length: 1400mm; machine width: 1200mm; weight: 650kg;

Lippert Belt Conveyor Riser with Arch and Straight GF 6005-650-500 RA2485 Technical data: Conveying length (NL): 6005 mm (ascending conveyor 2420 mm + arch 500 mm + upper straight 3085 mm) Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope / Slope: adjustable Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6005 ( 2420 + 500 + 3085 ) Nominal / outside width in mm: 650 Belt width in mm: 500 Driven ...

Transnorm conveyor belt with leading belt GF 4050+4890-600-500 RA2051 Technical data: Conveyor length (NL): 8940 mm (4050 mm + 4890 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8940 ( 4050 + 4890 ) Nominal / outside width in mm: 600 Belt  ...

Transnorm conveyor belt with leading belt GF 4070+4430 -600-500 RA2052 Technical data: Conveyor length (NL): 8500 mm (4070 mm + 4430 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor and overdrive from belt one to belt two Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 8500 (4070+4430) Nominal / outside width in mm: 600 Belt wid ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 137900 € : 2606.31 € : 220 to : 6050 mm : Y1 / Y2 / X Achse : 265 mm : 5100 mm : 450 mm : 530 mm : hydraulisch : 160 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 1050 mm : 154 mm : 250 l : 22 kW : 7500 mm : 1770 mm : 3350 mm : 20800 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides ...

General SKU045R150 MakeAVA-Hueb GmbH TypePerlrussm. HRM 600 No.5257 Year of construction1997 Mounted on framecheck Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Continuous mixercheck Trough sizesDia. 600x3000mm Inlet630x450mm Outlet500x340mm With jacket2 x 95L Max. temperature100C Motor55 KW, 400/690 Volt MaterialStainless steel Information LocationBarneveld Floor space5,2x1,0 M Total height1,3 M Technical specs Extra informationapproximately 0,1 bar working pressureDiscountPaddle mixersAva-HuepDiscountMixers > Paddle mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneve ...

General SKU053P249 MakeAVA-Hueb GmbH TypeHRM 600 No.M 5309-98 Year of construction1998 Mounted on framecheck Pressure Working pressure0.1 Bar Working pressure jacket1.5 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor55 KW Specified Features - Paddle mixer Continuous mixercheck Useful capacity600l (bruto 700l) Trough sizesDia. 600x3000mm Inlet450x630mm Outlet450x330mm With jacket(2x 95 Ltr.) Motor55 KW, 380/660 Volt, 980 Rpm MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floor space5,2x1,0 m Total height1,25 mDiscountPaddle mixersAva-HuepDiscountMixers > Paddle mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

CONTROLS   CNC controls SIEMENS SOLUTION LINE WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 600 mm   Y-axis travel: 560 mm   Z-axis travel: 510 mm TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   workpiece load (max): 600 kg SPINDLE / HEAD   spindle revolutions (min): 20 /min   spindle revolutions (max): 12000 /min   tool fixture: ISO SK 40   drive power S6 40%: 13 kW   drive power S1 100%: 9 kW   spindle torque S6 40%: 82 Nm   spindle torque S1 100%: 54 Nm AXIS DRIVES   traverse velocity X (max): 20000 mm/min   traverse velocity Y (max): 20000 mm/min   traverse velocity Z (max): 20000 mm/min   rapid traverse X: 30000 mm/m ...

: gebraucht : OH0110 : 230 € : 1 : 17 mm : 600 mm : 400 mm : 110 mm scraped surface 2 T-sluts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25291 Technical data : - Load capacity with 6 suction plates 600 Kg - Suction plate dimensions 400 x 250 mm - Vacuum motor power with battery operated 0.85 kw - Connection battery charger 230 V - Distance crane eye to suction plates in horizontal position 950 mm - Required space W 1400 x D 750 mm - Net weight approx. 180 kg

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12100 € : 232.32 € : 2500 kg : 1300 mm : 450 mm : 550 mm : 600 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (PRICES ON REQUEST): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19100 € : 366.72 € : 4000 kg : 1300 mm : 450 - 550 mm : 600 mm : 50 mm : 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 269588 € : 3 kW : Wechseltisch : 16 mm : 8 mm : 8 mm : 5 mm : 8 mm : 29,9 (mit Absaugung) kW : 6100 x 2070 mm : 6100 mm : 2070 mm : 125 mm : 6096 x 2032 mm : 240 (für 3 - 12kW) / 400 kg/m² : 5800 (für 3 - 12kW) / 960 kg : 100 m/min : 100 m/min : 141 m/min : 14 m/s² : +/- 0,05 mm : +/- 0,05 mm : 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems)  ...

control: OSP P200 M Number of axles: 4 St. x-travel: 1000 mm y-travel: 1000 mm z-travel: 900 mm b-axis: 0.001 ° size of pallet: 630 x 630 mm tool piece magazine with: 200 milling spindle: SK50 spindle turning speed - stepless: 12000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 30 t dimensions of the machine ca.: 10 x 4 x 3.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  Capacity: up to 10,000 bottles/hour Bottle formats: 330 ml, 500 ml, 750 ml Bottle height range: 50–360 mm Bottle diameter range: 40–160 mm Label length range: 30–140 mm Rotation direction: Clockwise Number of bottle plates: 10 Number of labelling stations: 1 Air consumption: 125 L/min Power consumption: 17.3 kVA, 400 V Working height: 1,100 ± 50 mm Construction: Stainl ...

Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new

General SKU316S544 MakeHosokawa Nauta TypeJ.P. K.T. No.unknown Year of construction1992 Mounted on legscheck Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor7.5 KW Specified Features - Conical mixer Conical mixercheck Double conecheck Capacity600 Ltr. Largest cone diameterdia. 1300 mm Cone height1560 mm Manholecheck(2x) With stainless steel armcheck Top drivecheck Motor7,5 kW 400/600 Volt Cantilevered screwcheck With jacketcheck Bottom dischargedia. 65 mm Suitable for liquid/pastecheck MaterialStainless steel Information LocationBarneveld Floor space2,5x1,3 M Total height3 M Weight1700 Kg Extra Specificationswith spare parts Plastic & polymersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicConical mixersOther chemicalStar ...

General SKU062A304 MakeCollette TypeGRAL-600 Mach.No.88MG60079 Year of construction1988 Main Features MaterialStainless steel Volume600 Ltr. Motor36 KW Specified Features - Universal mixer Gral-granulatorHigh-shear mixer/granulator (1x) Capacity600 Ltr, Useful 120-400 Ltr Vessel sizesdia. 1090x700mm, Vessel can be lifted hydr. With covercheck Pneumatic operated outletdia. 200mm With motor36,0 KW, 380/660 Volt (Ex) Rotor speed± 95/135 Rpm With lump breakercheck With motor5,5/7,5 KW, 380 Volt (Ex) Rotor speed± 1300/2600 Rpm MaterialStainless steel 1.4401 (316) Information LocationBarneveld With switchgearcheck Floorspace3,0x1,5 M Total height3,3 M ATEX compatiblecheck Technical specs Extra informationVessel can be lifted hydr. Universal mixersDiscountColletteMixers > Universal mixersDiscountBrand > Collette What you can expect from Foeth: -- Machine is in wo ...

General SKU288S384 MakeNetzsch Feinmahltechnik GmbH (D) Type606 No.204586 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Volume1750 Ltr. Motor75 KW Specified Features - Dissolver Dissolver( propeller stirrer) Shaft length800mm Disc diameter(propeller) dia. 400mm Between shaft and frame640mm With scrapercheck Motor75 kW 380/660 Volt Speed scraper13 Rpm With pans2x Capacity1750 Ltr., 1250 Ltr. Pan sizesdia. 1295x1350mm, 1295x980 mm Outletdia. 80mm With hydraulic liftingcheck Motor1.1 kW 380/220 Volt MaterialStainless steel Information Floorspace2.5x1.8 M Total height2.7 M Weight2800 Kg Extra Specifications: Incl. aluminium platform on wheels. Floorspace 1.5x2.1 M, Height standing area 650mm, Total height 1.8 M DissolversCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMi ...

General SKU298T694 MakeNiemann TypeKDV.600 No.73380 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Motor44 KW Specified Features - Dissolver Dissolvercheck Disc diameter490 mm Motor44 kW, 380 Volt Speed mixing shaft300-1400 rpm With pans2 Pan sizesdia 945x910 mm Outlet85 mm MaterialStainless steel Information Floorspace2,5x0,8 m Total height3,4 m Weight2000 kgDissolversCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatNiemannMixers > DissolversIndustries > Chemical > Catalysts & fillersIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > Other feedIndustries ...

General SKU296W564 MakeLoedige TypeFKM 600D2Z No.5080 Year of construction1969 Mounted on framecheck Main Features MaterialStainless steel Volume600 Ltr. Motor30 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms5 Capacity730 l Useful capacity600 l Trough sizesDia. 780 x 1200 mm Top connectionsDia. 250/300 mm Inspection hatch(2x) 450x380 mm Outlet240 x 180 mm Glands air purgedcheck Motor30 kW, 380/660 volt, 1460 rpm Speed mixing shaft134 rpm With lump breaker2x Motor5,5 kW, 220/380 volt Speed lumpbreaker2910 rpm MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace3,3 x 1,5 m Total height2,5 m Weight2260 kgSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicOther chemicalStarchTea, herbs &  ...

General SKU319T824 MakeNFT Netzsch Feinmaltechnik GmbH LocationBarneveld Type606 Main Features MaterialMild steel/Stainless steel Motor37 KW Specified Features - Dissolver Dissolvercheck Shaft length900 mm Disc diameter500 mm Motor37 kW 400/690 Volt MaterialMild steel, Stainless steel Information No.204495 Year of construction1992 With switchcheck Floorspace1,4x1,9 m Total height2,1 m Weight1100 kgDissolversCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatNetzschMixers > DissolversIndustries > Chemical > Catalysts & fillersIndustries > Chemical > SolventsIndustries > Chemical > Detergent & surf.Industries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > Other feedIndustries ...

General SKU204U1441 MakeAzo TypeDFS 140x600 Year of construction2007 Mounted on framecheck Main Features Motor1.1 KW Length800 mm Inlet diameter300 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4404 Horizontal conveyor screwcheck Tube-typecheck Diameter135 mm Length800 mm Shaft diameter35 mm Pitch120 mm InletDia. 300 mm OutletDia. 130 mm Motor1,1 kW Screw speed90 rpm (50 Hz): 109 rpm (60 Hz) Information LocationBarneveld Floorspace1,4 x 1,4 m Total height0,96 m Weight300 kg CEcheck Extra SpecificationsContainer bottom dimension 1,180 x 1,180 mm. This conveyor screw is equipped with a vibrating motor. Easy-clean version. RubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & ole ...

General SKU900WP050 MakeSembroek Zaandam ( NL ) No.477632 Year of construction1981 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket3 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity600 ltr Dished bottomcheck Dished top sidecheck Manholedia 190 mm With jacket30 + 20 ltr Max. temperature120 degr C With anchor stirrercheck Motor1,1 kW Stainless Steel Reactors MaterialStainless steel Information Floorspace260x130 cm Total height125 cm Weight700 KG Extra Specificationsmaterial Stainless Steel 1.4435, Ekator Agitator type EM 040, 1,1 KW motor, EExeIIT3RubberAgrochemicalsPlastic & polymersStainless Steel ReactorsCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & p ...

General SKU302U610 MakeDe Dietrich LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6000 Ltr. Motor5 KW Specified Features - Glass-lined Reactor MaterialGlass - Enamel (3009) Glass Reactors Reactorcheck Capacity6937 / 39,5 Ltr. Vessel sizesDia:2200x2500 mm Dished bottomcheck Dished top sidecheck ManholeDia: 770mm Top connectionsDN 350, DN250(2x),DN100(4x) OutletDN100 With jacketcheck 712Ltr. Max. temperature-10/150° With propellor stirrercheckimpeller Motor5kW, 400Volt, 1500rpm (EX) (no type plate!) Speed mixing shaft96rpm Information No.65104 Year of construction2003 Floorspace2,2x2,2 m Total height4,6 m Weight6200 kg Technical specs Extra informationVolume 712 Ltr.BiotechnologyAgrochemicalsCatalysts & fillersSolventsGlass-lined R ...

General SKU347T945 MakeLödige TypeKM-600D No. 8950 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Volume600 Ltr. Motor5.5 KW Specified Features - Powder turbo mixer Continuous mixercheck Capacity600 Ltr. Useful capacity±300 Ltr. Trough sizesDia. 500x1480mm InletDia. 300mm Inspection hatch370x300mm (2x) Outlet200x100mm Glands air purgedcheck Motor5,5 KW, 380/660 Volt MaterialStainless steel Information Floorspace2,1x1,1 M Total height0,8 M Weight560 KGSpicesCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicOther chemicalStarchTea, herbs & coffeePowder turbo mixersGeneric medicinesPowdered foodsLoedigeIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Fe ...

General SKU060C274 MakeUnilever Research TypeBatch Pelletizer Year of constructionunknown LocationBarneveld Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor1.1 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4401 (316) Stainless Steel Reactors Reactor(1x) Capacity600 Ltr Vessel sizesdia. 600x3700mm Dished bottomFlat top side Top connections2x dia. 40mm + 3x dia. 30mm Outletdia. 25mm With jacketcheck With gate type stirrercheck Motor1,1 KW, 220/380 Volt (Ex) Speed mixing shaftvariable Information Floorspace1,2x1,2 M Total height4,8 MRubberAgrochemicalsPlastic & polymersStainless Steel ReactorsCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoSolid pharmaceuticsDyes & pigmentsAPIMinerals & inorganicOther chemical ...

General SKU056C286 MakeGlatt AG Pratteln Switzerland TypeGC-490/500/600/750 No.101.196 Year of construction1994, Alterations in 2004 (Ref. 601.196-02) LocationBarneveld Main Features MaterialStainless steel Motor1.5 KW Inlet diameter750 mm Specified Features - Coating pan MaterialStainless steel 1.4435 (316L) Coating installationDrum coater with 7 drums (1x) Capacity5,6/11/21/51 Ltr Pan diameter490/500/600/750mm Motor1,5 KW, 400 Volt (Ex) With frequency controllercheck Pan speed± 2-20 Rpm With steam heatingcheck (84 KG/Hr), Steam boiler is not included With fancheck (2x, Intake and exhaust air) Capacity1200 m3/Hr Motor5,3 KW, 400/690 Volt + 1,5 KW, 400 Volt With spraying armcheck (2x), Dosing pump is missing Information With switchgear/air handling unit Floorspace2,5x1,7 m Total height2,2 m ATEX compatiblecheck Extra Specifications- Number of drums: 2x dia. ...

General SKU063S240 MakeLödige TypeKM-600D No.8949 Year of construction1979 LocationBarneveld Main Features MaterialStainless steel Volume600 Ltr. Motor5.5 KW Specified Features - Powder turbo mixer MaterialStainless steel Continuous mixercheck Capacity600 Ltr. Useful capacity300 Ltr Trough sizesDia. 500x1480mm InletDia. 300mm Inspection hatch370x300mm (2x) Outlet200x100mm Glands air purgedcheck Motor5,5 KW, 380/660 Volt Information Floorspace2,1x1,1 M Total height0,8 M Weight560 KGSpicesCatalysts & fillersFeed additivesDiscountOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicOther chemicalStarchTea, herbs & coffeePowder turbo mixersGeneric medicinesPowdered foodsLoedigeIndustries > Food & Feed > SpicesIndustries > Chemical > Catalysts & fillersIndustries > Food & Feed > Feed a ...

General SKU338S621 LocationBarneveld MakeMorton Main Features MaterialStainless steel Volume600 Ltr. Motor15 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity600 ltr Useful capacity400 ltr Trough sizesdia. 800x1255mm Inletdia. 250mm, dia. 350mm Inspection hatch450x380mm (2x) Outlet240x200mm With adjustable packing glandscheck Motor15 kW 660-690 Volt MaterialStainless steel 1.4301 (304) Information TypeFKM 600 Year of constructionunknown, manufacturer plate is missing Floorspace2,3x1,5 M Total height1,4 M Weight1200 Kg Extra SpecificationsEasy clean executionSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicOther chemicalStarchTea, herbs & coffeePowder turbo mixersGeneric medicinesPowdered foodsMortonIndustries > Fo ...

General SKU257M257 MakeLOEDIGE TypeFKM 600D No.14787 Year of construction2001 Mounted on framecheck Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor18.5 KW Specified Features - Powder turbo mixer MaterialStainless steel 1.4541 (321) Lödige mixercheck Capacity600 Ltr Useful capacity200 - 420 Ltr Trough sizesDIA. 800 x 1250mm Top connections2x DIA. 340mm Inspection hatch2x 450 x 380mm OutletDIA. 200mm With jacketcheck Max. temperature100 Glands air purgedcheck Motor18,5 KW, 380/660 Volt Speed mixing shaft187 Rpm Information LocationBarneveld Floorspace3,7 x 1,8 M Total height1,9 M Weight2150 KGSpicesCatalysts & fillersFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicOther chemicalStarchTea, herbs & coffeePowder turbo m ...

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Soraluce SLP-6000Year of manuf. : 2017 Control : Heidenhain TNC 640 Speed : 5000 rpmMovement X/Y/Z : 4500/1800/1300 mm____________Description:In General:Year of manufacture:2017Control system:Heidenhain TNC 640Travel range X/Y/Z:4,500/1,800/1,300 mmSpindle speed:5,000 rpmTool holder:SK 50Milling head (spindle):Technology:Diagonal head with gear spindleIndex:0.001°Speed:5,000 rpmTool holder:SK 50Max. power:43 kWMax. torque:1,045 NmCoolant supply:Coolant + blast airWorking table:Clamping surface:6,000 x 1,100 mmT-slots:6 x 22H12, spacing 140 mmTool magazin:Technology:Chain magazineNumber of stations:40Tool changer:Double gripper (horizontal/vertical)Max. tool diameter:125 (250) mmMax. tool length:400 mmEquipment:Position measurement systems:Direct scalesChip removal:Chip conveyorCoolant supply:Internal coolant system with filter, 20 barWorkpiece measurement:Funk M&H probeSet-up op ...

Exeron HSC 600Year of manuf. : 2020 Control : Heidenhain TNC640 Speed : 42000 rpmMovement X/Y/Z : 650/550/400 mmTool holder : HSK-E40 ____________Description:Spindle:Technology:MotorspindleSpeed:42.000 rpmPower (max.):13,5 kWTaper:HSK-E40Workingtable:Clampingsurface:530 x 900 mmTableloading (max.):600 kgIn general:Toolmagazine:60 StationsRapid travers in X/Y/Z:50 m/minEquipment/Accessory:Positionsensor:Direct scales in X/Y/ZChipmanagement:ChiptrayCoolingmanagement:MinimumlubricationWorkpi ecemeasurement:Touch probe, Renishaw OMP 400Toolmeasurement:Laser, BLUMSetup operations:Electronic handwheelFurther Equipment:Spindlechiller

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31620 € : 603.94 € : 0.4 - 2 mm : 600 mm : 1200 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 6-8 Wochen ab Auftrag : Italien : 600 to : 500 mm : 6.000 x 2.550 mm : 700 mm : 18 mm/s : 3 mm/s : 5000 mm : 6000 mm : 3000 mm : 43000 kg : horizontal verschiebbar : 2550 mm : 2200 mm : 4600 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

:KVL-450 | KVL-600 | KVL-800| KVL-1100 turning diameter:450|600|800|1100 mm swing diameter:550|650|1000|1250 mm turning height:450|500|750/950|1000 mm spindle nose:A2-8|A2-8|A2-11|A2-15 table rotation speed:50-2500|50-2250|20-1500|20-600 U/min Travel of Ram (vertical):450|500|800 / 1000 (Opt.)|1000 mm Travel of ram (horiz.):300|340|500|700 mm rapid power traverse in X-and Z direction:20/24|20/24|20/20|10/10 m/min Tool changer:8/10/12 mit vertikaler oder horizontaler Scheibe tool taper:VDI40/VDI50 oder Schaftaufnahme drive capacity - spindle motor:11/15|15/18.5|18.5/22|37/45 kW Machine height:2600|2910|4020|4605 mm weight of the machine ca.:4500|6000|13000|18000 kg hydraulic motor:2,2 kW servo motor X-axis:1,6|1,6|4|7 kw servo motor Z-axis:3|3|7|7 kw coolant pump drive:0,75+1,1|0,75+1,1|0,75+0,75+1,1|0,75+0,75+1,1 kW :35|40|50|70 kva CNC controller:Siemens/Fanuc/Fagor CNC controls from:Si ...

x-travel:6000 mm y-travel:2100 mm z-travel:1500 mm Controls:HEIDENHAIN iTNC 530 BASIC DESIGN:. - basic design : travelling column :. WORKING RANGE -MILLING-:. - x-axis travel:6000 mm - y-axis travel:2100 mm - z-axis travel:1500 mm FLOOR PLATE:. - clamping surface (left-right):7000 mm - clamping surface (front-back):2000 mm WORKING SPINDLE / HEAD:. - spindle type : orthogonal head :. - tilting range:360 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - tilting range (2nd axis):270 ° - - mode of operation : automatic :. - - positioning/indexing:1 ° - spindle revolutions (min):20 /min - spindle revolutions (max):4000 /min - spindle diameter:90 mm - taper fixture : ISO SK 50 :. - spindle power (continuous):32 kW - torque (max.):910 Nm AXIS DRIVES:. - feed velocity (min):2 mm/min - feed velocity (max):20000 mm/min - rapid traverse:25000 mm/min ELE ...

x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis

spindle speed::max. 12000 tool taper:HSK 80 . b-axis:360 x 0,001 ° worktool support (A-axis):+40 / -95 ° weight of the machine ca.:25 500 Kgs. x-travel:800 mm y-travel:700 mm z-travel:630 mm dimensions of the machine ca.:6200 x 3000 x 3200 mm pallet size::500 x 500 mm no. of tools in the magazine:61 Nos. Weight approx.:23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine with toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device oroginal table included

x-travel:600 mm y-travel:410 mm z-travel:520 mm tool change unit:16 turning speeds:8000 1/min control:SIEMENS 810 shopmill table surface area:840 x 420 mm rapid traverse X- and Y-axis:36 m/min rapid traverse Z-axis:20 m/min taper ISO:SK 40 spindle drive:15 kW weight of the machine ca.:2,5 t space requirements approx. LxWxH:2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, approx. h "machine on", approx. h "spindle on"

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply,

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine (without toolchanger), Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device

turning diameter:1250 mm turning length:6000 mm spindle bore:130 mm Turning rate:5 - 710 U/min. turning diameter over bed slide:850 total power requirement:37/52 kW weight of the machine ca.:16 t dimensions of the machine ca.:12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady

length in total:1200 mm band width:500 mm conveying height:1200 weight of the machine ca.:1 t dimensions of the machine ca.:4,0 x 1,5 x 2,2 m swarf conveyor with coolant attachment Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2024, Josef Weber. All rights reserved.