dmc 100 used for sale

Offer 20147 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

General SKU416W1314 LocationBarneveld CEcheck MakeLessine Main Features Motor7.5 KW Inlet diameter100 mm Width100 mm Specified Features - Pin Mill MaterialStainless steel 1.4306 (304L) Pin Mills Pin disc millcheck Rotor size270 mm Grinding room size320 mm Number of pins on house side:45 Number of pins on door side:100 Pin diameter12 Housing dimensions Dia. 400 mm InletDia. 100 mm Motor7,5 kW (400 V, 1470 rpm) Speed3000 rpm Information TypeEL 100 No.21-1132 Year of construction2021 Mounted on framecheck Floor space0,70x1,30 m Total height0,70 m Weight500 kgPin MillsLessineMills > Pin MillsBrand > Lessine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

Offer 20148 Technical data: - Load capacity 1000 kg - Tilt angle up to max. 90 ° - Foot pump - Fork length 820 mm - Fork width 550 mm - Space requirement approx. L 1230 x W 740 x H 650 mm - Weight approx. 220 kg

General SKU366W1225 LocationBarneveld Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialGlass Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 500x1000mm Top connectionsDN80/DN40 OutletDN40 Information MakeGVF Glasstechnik Floorspace0,65x0,65 m Total height1,4 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU366W1219 LocationBarneveld MakeQVF Glasstechnik Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 600x700 mm Top connectionsDN150 OutletDN40 Information TypeVSV100 No.B2.32 Floorspace0,60x0,60 m Total height1,1 m Extra SpecificationsWith Endress + Hauser temperature gauge, (Ex)Vertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

approx. 320 l/min (depending on the medium and solids content) approx. 0.7 m² filter area 0.12 kW 400V 50 Hz Signal output: Potential-free contact for nonwoven shortage L x W x H 1135 x 1300 x 650 145 kg Stainless steel 1.4301 Documentation fully available Additional gifts: - Tub for collecting the filtrate cake (self-made) - Frame - a few rolls of filtration fleece Machine can be inspected and, if necessary, switched on

Code: 0058 Brand: CASATI MACCHINE Model: Z 1000 - Norme CE Veneer splicing machine - CE Standard Technical data: Arm lenght mm 1000 Veneer thickness mm 0,4-2 Feed speed mt/min 8-18 Total electric power Kw 0,5 Electronic adjustment of the temperature Overall dimensions : mm 1300 x 500 x 1300 h Weight kg 200 Euro 2.500,00

General SKU314W627 MakeHosokawa Micron TypeTorus-Disc TDJS 1000-3.15 No.4056101000 Year of construction2001 LocationBarneveld Pressure Working pressure jacket3 Bar Technical specs Max. temperature50 °C Main Features MaterialStainless steel Volume3375 Ltr. Motor11 KW Specified Features - Continuous dryer Torus-disc dryercheck Continuouscheck Capacitybruto 3375 l (netto 2000 l) Trough sizes1120 x 3150 mm InletDN400 ManholeDN500 inspection port OutletDN400 With jacketcheck Shaft can be heatedcheck Max. temperature50°C Motor11 kW (400 V, 1500 rpm) Speed mixing shaft20 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information Floorspace5,45 x 1,45 m Total height2,10 m Weight7500 kg Extra SpecificationsRotor: : : - volume 107 l. : : - working pressure 3 bar, design pressure 5 bar, test pressure 7 bar. : : - working temp 50°C, design temp ...

From the Gütersloh site, we offer a well-preserved eccentric press Pressure 100 t Projection 330 mm Stroke 10-130 mm Stroke rate 56 stroke/min Plunger adjustment 80 mm Table surface 830x600 mm Plunger area 250x130 mm Table height 870 mm Peg hole in plunger 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

General SKU354T1021 LocationBarneveld Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor0.3 KW Specified Features - Stirring vessel MaterialStainless steel Open stirring vesselcheck Capacity100 Ltr. Vessel sizesdia. 500x690 mm Conical bottomcheck Outletdia. 60 mm With jacketcheck With anchor stirrercheck Motor0,3 kW 220/380 Volt Speed mixing shaft20-120 rpm Information Makeunknown: missing nameplate Mounted on legscheck Floorspace0,8x0,6 m Total height1,7 m Weight300 kgStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -

General SKU308U650 MakeLFC Lochem bv LocationBarneveld TypeMVDCD 900/1000/13.5/11 Pressure Working pressure10 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Surface13.5 m2 Cake330 Ltr. Specified Features - Horizontal plate filter Plate filterVertical pressureleaffilter Notified bodyTÜV Filter surface13,5m2 Number of platens11 Between the plates70mm Solids outletdia.350mm With jacket(20 ltr) Max. temperature10-160°C Cake capacity0,33m3 MaterialStainless steel 1.4404 (316L) Information No.P9501/0480C Year of construction1996 Floorspace1,5x1,2 M Total height2,8 M Weight1000kg Extra Specifications- with knocker Horizontal plate filtersLFC LochemFilters > Horizontal plate filtersBrand > LFC Lochem What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

Ref. no.: 17540 Hersteller: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

General SKU343T928 MakeAlexanderwerk LocationBarneveld CEcheck TypeG 1/100 Main Features Motor4 KW Specified Features - Roll compactor MaterialStainless steel 1.4401 (316) Roll compactors Granulatorcheck Roll sizesdia. 190x170 mm Number of dies available:1 Die perforation2 mm Number of press rolls1 Motor4,0 kW 230/400 Volt (Ex) With pre-mixercheck With motor0,37 kW With variable speed drive4,2-21 RPM Inlet440x380 mm Outletdia. 100 mm Information No.05132198 Year of construction2001 Mounted on framecheck With switchgearcheck Floorspace1,2x1,2 m Total height2,2 m Weight820 kg ATEX compatiblecheckRoll compactorsAlexanderwerkCompactors > Roll compactorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the  ...

Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 100 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

GT-5290 Ripper - Brand: SCOINER - Model: 150/1300/100 - With horizontal hydraulic pusher and vertical hydraulic pusher - Rotor length: 1450 - Diameter: 500 - Engine: 100 hp (75 kw) - Dice: 30x30 - With hopper - With electric control - Year: 2000

General SKU300P654 MakeGTI Suez food & Pharma bv (NL) No.96004301 Year of construction2007 LocationBarneveld Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume1000 Ltr. Motor7.5 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity1000 Ltr Vessel sizesdia.1000mm x1700mm Dished bottomcheck Dished top sidecheck Manhole400x300mm Top connections(5x)dia.45mm, dia.100mm, dia.70mm, dia.200mm Outletdia.150mm With jacket(100 Ltr) Max. temperature144 degr.C. With paddle stirrercheck Motor7,5 KW, 400/690 Volt Speed mixing shaft100 rpm MaterialStainless steel 1.4404 (316L) Information Floorspace1,3x1,3 M Total height3,5 M Weight1450 KG CEcheckStirring vesselsGTI Food & PharmaStirring vessels > Stirring vesselsBrand > GTI Food & Pharma What you can expect from Foeth: -- Machine is in working condition -- At a reduc ...

MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools

USED TETRA PAK TBA 8 1000ML SLIM FILLING LINE FOR SALE Item #: Usm-236 Category Tetra Pak TBA 8 ONE USED TETRA PAK TBA 8 1000ML SLIM COMPLETE FILLING LINE FOR SALE. 1-TBA 8 1000ml Slim Filling Machine, Year of manufacturing 2001, Version 100v, working hours 23000 2-Tetra Cap Applicator Flex 30 for helicap 23, Year of manufacturing 2014 and working hours 7000 3-Tetra Pak Packer 70 4-Conveyors system and Paper trolly Complete line is in working condition and Tetra Pak maintained.

USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 Item #: Usm-242 Category Tetra Pak A3 CF/Flex USED TETRA PAK A3 FLEX 1000ML 150v GEMINA FILLING LINE FOR SALE YEAR 2007 A3 Flex 1000ml Gemina Filling Machine, Version 150v, Year of manufacturing 2007, Speed 7000 Packs per hours, Working hours 43250 Cap Applicator Cap Flex 30, Year of manufacturing 2007, Cap Type Helicap 27 Conveyors and Paper trolly Condition: Good

CNC vertical machining center Type: Vesta-1000 Manufacturer: Hwacheon Year: 2016 Control: Fanuc Series 0i-MD X: 1000 mm Y: 550 mm Z: 500 mm Distance table-spindle: 130 – 630 mm Working surface: 1100 × 502 mm Table load capacity: 700 kg Spindle speed: 12000 rpm Rapid traverse (X / Y / Z) m/min 36 / 36 / 30 Working feed (X / Y / Z) mm/min 1 – 24,000 Feed motor (X / Y / Z) kW 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Tool changer: 24 positions Cooling through the center of the tool 30 bar Power consumption: 30 kVA Coolant tank capacity: 380 l Chip conveyor 4th axis TSUDAKOMA Wireless workpiece probe + tool probe. Dimensions:3335 × 2200 x 2670 mm Weight: 6500 kg Machine in good condition, under power Find more here - / Contact us at -

Variabele snelheid met frequentie verzenden Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

Horizon Vac 100 a+c, Year 2005 10 Station Vac 100a 10 Station Vac 100c 1 x PJ-77R Jogger 1 x Stitch & Folder SPF-20A 1 x Fore-Edge Trimmer FC-20A Etc. Available: immediately

Description, subject to prior sale. Additive Manufacturing - 3D print: Trumpf TruPrint 1000 - Green Laser Basis machine: Trumpf TruPrint 1000 y.o.m. 2019 Assembly space: ∅ build cylinders 100mm, effective building area 97 mm, Building height 100 mm Operation hours 27500 h (incl. production time 2290 h) Condition excellent Laser machine: Trumpf TruDisk, 1020 Power: Single Laser Output power of 1000 W at workpiece Green wavelength: 515 nm Condition excellent. Can be seen under power. Technical indications, subject to error.

turning diameter: 305 mm turning length: 870 mm control: FANUC 31i B5-NT-SmartX spindle turning speed range: 6000 + 6000 U/min turret head: 24 12 angetrieben Dimensions (L/W/H): 3200 x 2500 x 2700 mm weight of the machine ca.: 16 t Y- & B- axes Misc. accessories more details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Hammel Model: NZS 1000 Year of Manufacture: 2012 Operating hours: approximately 3,000 hours Undercarriage: crawler chassis (tracked mobile) It has two built-in magnets Find more here - / Contact us at -

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

EDM machine Charmilles Robofil 100

Injection moulding machine Arburg 420C 1000-290 BJ 2007

This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine.

Two pcs turbocharger cartridge for 3516 industrial engines part number 177-1009 /. 0R9809 Perfect machinery international bv + 31 78. 6158040 or whatsapp + 653549259

General SKU246S156 MakeWilliam Tatham Ltd (UK) No.15422 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Motor15 KW Specified Features - Paddle mixer MaterialStainless steel Paddle mixercheck Double shaftcheck Useful capacity1000 ltr (ca 3000 ltr cross) Trough sizes1800x1500x1100mm With cover(2x) 1500x270mm Inletdia. 400mm Outlet(2x) 1200x300mm Motor15 kW 380-415/660-720 Volt Information Floor space2,5x2,3 M Total height2,0 M Weight3400 Kg CEcheckPaddle mixersTatham/forbergMixers > Paddle mixersBrand > Tatham/forberg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1166 MakeDe Dietrich & CIe (FR) LocationBarneveld Type1000 Ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (3009) Capacity1240 Ltr (nett.1000 Ltr) Vessel sizesdia. 1000mm x1810mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN200 (2x), DN100 (2x), DN80 (2x) OutletDN80 Max. temperature-30/120 Degr. C. With jacket(82 Ltr) Max. temperature-30/120 Degr. C. With propellor stirrercheck Motor0.75 kW, 230/400 Volt (EX) Speed mixing shaft317 rpm Information No.22014 Year of construction1990 Floorspace1,4x1,4 M Total height2,8 M Weight1500 Kg ATEX compatiblecheckPressure vesselsDe DietrichTanks > Pressure vesselsBrand > De Dietrich What you can expect from Foeth ...

General SKUR1170 MakeEstrella AG (CH) LocationBarneveld Type1000 Ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Capacity1280 Ltr (nett.1000 ltr. ) Vessel sizesdia.1000mm x1810mm Dished topcheck Dished bottomcheck With covercheck Top connections2x DN200, 2x DN100, 3x DN80 OutletDN80 Max. temperature-30/100 degr.C. With jacket(135 Ltr) Max. temperature-30/100 degr.C. Information No.84169 Year of construction1985 Floorspace1,4x1,4 M Total height2,1M Weight1100 KgPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...

General SKU099Z410 MakeCellier, Aux-les-Bains No.828401 Year of construction1978 LocationBarneveld Main Features MaterialStainless steel Volume1000 Ltr. Motor2.2 KW Specified Features - Stirring vessel MaterialStainless steel 1.4401 (316) Open stirring vessel(1x) Capacity1000 Ltr, Cover is missing Vessel sizesdia. 980x1400mm, Vessel insulated Outlet± dia. 20mm With jacket(120 Ltr) Information Floorspace1,2x1,2 M Total height1,9 M Weight800 KG Extra Specifications- With bottom driven magnetic stirrer (motor ± 2,2 KW) - No cover on the vessel - no legs Stirring vesselsCellier FranceStirring vessels > Stirring vesselsBrand > Cellier France What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

General SKUR1174 MakeEstrella AG (CH) LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialGlass Volume1000 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel, Stainless steel 2.4610 (Hastelloy C-22) Capacity1000Ltr. (bruto 1280Ltr.) Vessel sizesDia: 972 x 1810mm Dished topcheck Dished bottomcheck Top connections2x DN200, 2x DN100, 3x DN80 OutletDN80 Max. temperature100°C. With jacketcheck 135Ltr. With propellor stirrercheck( made of hastelloy C-22) Motor1.1 kW, 220/380 Volt (EX) Speed mixing shaft571 rpm Information No.84167 Year of construction1985 Floorspace1,5x1,5m Total height3m Weight1000kg ATEX compatiblecheckPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you can expect from Foeth: -- Machine is in working conditio ...

This 3-axis Eikon VMC 1000 was manufactured in 2000. It features a 10,000 RPM spindle, a 20-tool changer, and X/Y/Z travels of 1000mm, 500mm, and 400mm respectively. Equipped with a Selca 3045 control system, consider the opportunity to buy this Eikon VMC 1000 vertical machining centre. Contact us for more information.

General SKU211N045 LocationBarneveld Specified Features - Tray dryer Material finishCoating Main Features MaterialCoated Volume1000 Ltr. Surface4.3 m2 Tray dryers Tray dryerunknown, manufacturer tag is missing Coated housingcheck Coated trayscheck Heating surface4,3 m2 Drying chamber capacity± 1000 Ltr Drying chamber sizesdia. 1100 x 1050mm Number of trays6x Tray sizes720 x 1000mm Distance between the trays100mm With containerscheck Container sizes700 x 1000mm With 1 doorcheck Connection for the vacuum pumpdia. 50mm Connections2x dia. 40mm Information Floorspace1,9 x 1,4 M Total height1,9 M Weight1590 KG Technical specs Extra informationdrying chamber: dia. 1100 x 1050 mm: container: 700 x 1000 mm Tray dryers-Dryers > Tray dryersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for sh ...

General SKU254S211 LocationBarneveld CEcheck MakeZenner Ventilatoren GmbH TypeVRZ 1000/20/1 ZAH Pressure Pressure buildup0.0459 Bar Main Features Capacity13.3 m3/Min Motor18.5 KW Pressure0.045 Bar Specified Features - Blower Blowercheck Capacity799 m3/h (total increase of pressure 4587 Pa, density 0,65 Kg/m3) Motor18.5 kW 400/690 volt Inletdia. 190mm Outletdia. 190mm MaterialStainless steel Information No.78153 Year of construction2015 Floorspace2,3x1,5 M Total height1,7 M Weight1400 Kg Extra SpecificationsMax temperature 450 degr. C with extra small cooling fan 0.37 kW 208-255/360-450 volt BlowersZenner Ventilatoren GmbHBlowers > BlowersBrand > Zenner Ventilatoren GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machi ...

This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.

General SKU254S226 LocationBarneveld MakeHauck (USA) TypePBG 1000E-EE-VA-A air heater Main Features MaterialMild steel Specified Features - Miscellaneous MaterialMild steel Information Year of constructionUnknown Floor space4,3x2,2 M Total height2,1 M Weight2100 Kg Extra SpecificationsGas burner Hauck (USA), type: PBG 1000E-EE-VA-A, capacity 230 kW, type of gas: natural gas: With fan, brand: Karl Klein type: EMV 330/S (110 deg C), 110 m3/h: With 4x air blowers: 0.25 kW 230/400 Volt and with air heater: Leister LE 10000 HT 15kW + spare air blower. With board cabinet (as is). MiscellaneousHauck (USA)Miscellaneous > MiscellaneousBrand > Hauck (USA) What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Pl ...

Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details.

General SKU397M454 LocationBarneveld MakeDE RIJK RVS Type2.2 OF No.284898 Pressure Working pressure5 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume1000 Ltr. Motor0.3 KW Specified Features - Stirring vessel MaterialStainless steel 1.4306 (304L) Closed stirring vesselcheck Capacity1000 Ltr Vessel sizesDia. 1100 x 1100mm Dished bottomcheck Dished top sidecheck ManholeDia. 440 mm Top connections2x Dia. 40mm, 2x Dia. 45mm, Dia. 50mm, Dia. 65mm OutletDia. 45mm With jacketcheck With propellor stirrer(Magnet) Motor0,3 KW, 90 Volt (DC) Speed mixing shaft0 - 138 Rpm Information Year of construction1987 Floorspace1,6 x 1,7 m Total height2,0 m Weight1250 kgStirring vesselsDe Rijk RVSStirring vessels > Stirring vesselsBrand > De Rijk RVS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Re ...

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

General SKU297P596 LocationBarneveld MakeMTI Industrieanlagen GmbH (DE) TypeEM 100 B No.835 Pressure Working pressure2 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor11.5 KW Specified Features - Hot mixer MaterialStainless steel Hot mixercheck Capacity100 Ltr Vessel sizesdia.580mm x390mm With jacketcheck Max. temperature95°C. With motor11,5 KW, 440 Volt Rotor speed+/- 350 rpm Pneumatic operated outletcheck Outletdia.220mm With lump breakercheck Motor3,6/4,8 KW, 380 Volt Information Year of construction1998 With switchgearcheck Floorspace2,3x0,8 M Total height1,8 Weight500 KGHot mixersMTIPlastic machinery > Hot mixersBrand > MTI What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The N ...

This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.

General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200  ...

Manufacturer: Matachana Model: 1006-2 Year of Manufacture: 2018 Volume (Vol. I / Vol. II): 44.5 L / 66 L Maximum pressure (PSmax): 3.0 / 3.0 bar Minimum pressure (PSmin): -1 / 0.0 bar Test pressure (PT): 5.4 / 7.2 bar Test date: 05/11/2018 Fluid group: 2 – Water / Steam Temperature range (TS min/max): 5 °C / 150 °C Find more here - / Contact us at -