126,618 used machines on RESALE, but how to find them? Machine Search
B&A REF: 9213 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE: HYDRAULIC
Key data: 380 mm, 1000 mm, 4000 1/min
Stock number: 3961 CNC LATHE Manufacturer: MAZAK, Type: QTN 250-1000L Year of Make: 2004 Specifications: Max. circumferential diameter 380 mm dia. Max. turn. About Bed 610 mm Dia. Turning length 1032 mm Main motor power 26 kw Main spindle speed range 4000 rpm Hole through drawing pipe 80 mm dia. X axis movement 230 mm Z ash movement 1000 mm Tool turret with 12 stations Total power consumption 50 kva Control 640 T Nexus Fabr. Spindle Hours 6091 Hours Controlled in X-Z axes Accessories: Hydraulic Main Center Chuck Kitagawa B-212 15X (300mm) mm dia. Various tools pcs. Tool setter Chip conveyance. Length: 3550 mm, Height: 1870 mm, Width: 2000 mm, Weight: 5200 kg
Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Bed size 105x 147 cm Pneumatic clutch full working condition Video available
Manufacturer: Heina Model: TT2-1000/1000 Year of Manufacture : 2018 Condition : Very Good Find more here - / Contact us at -
A Reis spotting press for tool and mold making is available. Pressing force: 1000kN, clamping area: 1200mm/1500mm, installation height: 1575mm, max. mold weight: 10000kg, max. tilting plate load: 4000kg, ram stroke: 1450mm, return force: 400kN, hydraulic pressure: 190bar, pneumatic pressure: 5bar. Machine dimensions X/Y/Z: approx. 3200mm/4500mm/4100mm. Documentation available. On-site inspection possible.
DH Robotics RGI-100-14 Rotating Electric Gripper without Brake Gripping force (per back): 10~35 N Stroke (both sides): 14 mm Rotational torque: 0.25 Nm Rotation Range: Infinity Mechanical data Maximum rotation speed: 1500 degrees/s Rotation repeatability: ± 0.02 degrees Rotation clearance: ± 1 degree Position repeatability (gripping): ± 0.02 mm Open/close time: 0.2 s/0.2 s Weight: 1.1 kg Electrical Specifications Communication interface: Modbus RTU (RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Rated current: 1.1 A Peak current: 2 A Degree of protection: IP 20 Recommended Operating Environment: 0-40°C, < 85% RH
DH Robotics RGI-100-30 Rotating Electric Gripper without Brake Gripping force (per back): 10~35 N Stroke (both sides): 14 mm Rotational torque: 0.25 Nm Rotation Range: Infinity Mechanical data Maximum rotation speed: 1500 degrees/s Rotation repeatability: ± 0.02 degrees Rotation clearance: ± 1 degree Position repeatability (gripping): ± 0.02 mm Open/close time: 0.2 s/0.2 s Weight: 1.2 kg Electrical Specifications Communication interface: Modbus RTU (RS 485), Digital I/O Nominal voltage: 24 V DC ± 10% Rated current: 1.1 A Peak current: 2 A Degree of protection: IP 20 Recommended Operating Environment: 0-40°C, 85% RH
Offer 25374 Specifications: - Max. pressing force 100 t - Max. ram stroke approx. 500 mm - Lifting speed 25 mm/sec. - Return 125 mm/min - Installation height approx. 1000 mm - Projection to the middle of the ram 380 mm - Pusher clamping surface 530 x 400 mm - Plunger clamping pin 40 mm - Table size 750 x 560 mm - Table hole / through hole in the table 200 mm - Table height above floor 720 mm - Oil filling quantity approx. 200 ltr - Drive 400 V / 11 kW - Space requirement approx. W 1150 x H 3250 x D 1850 mm - Weight approx. 4600 kg
Height=6 m, Overall length= 21 m, Overall width= 3 m, Description proofer for 4 carts climate control Lillnord PG-1000 used in working condition
Height=1.612 m, Overall length= 1.127 m, Overall width= 0.75 m, Producer: Lillnord temperatures: +20°C – +45°C humidity: 60%-95% power: 6,2 kW, 380 V Made in Denmark Description for 10 m3 proofer used
grinding length: 1000 mm grinding width: 750 mm workpiece height: 700 mm Control: SIEMENS, SIMATIC S 7-1500 table surface area: 1050 x 640 mm table height over floor: 1000 mm table speeds: 3.000 - 30.000 mm/min cross feed of table continual: 5 - 5.000 mm/min cross feed of table intermittent: 0,1 - 65,0 mm vertical adjustment, 1 graduation: 0,002 mm rapid traverse vertical: 0,25 m/min grinding spindle speed: 50 - 2.500 U/min grinding wheel size: ø 400 x 50 x ø 127 mm workpiece weight: max. 1.000 kg table load: max. 1600 kg total power requirement: 33,2 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 4,50 x 2,37 x 2,65 m - complete electronic / electric renewed in 2018 Accessories: magnetic plate 1000 x 650 mm, grinding wheel with flange, wheel trueing attachment, extraction The data for this ad was created with ModulMWS - the software solution of Log ...
Clamping Force: 300 ton // Shot Weight (Max): 476 g
Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm
Container Size With Actual Configuration: 2 l // Number Of Heads: 5
- VAC 100a Station - 2 x VAC 100m Station - ST-40 with SPF-CV infeed conveyor - SPF-20A Stitcher & Folder - FC-20A Trimmer - Standard delivery
APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...
ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for the highest performance. This range includes all the main characteristics of RF ranges in terms of efficiency, Power factor, ventilation, internal structure (dedicated 3 compartments) and general flexibility. An integrated digital interface with OLED display and integrated USB enables the best and easiest overview/setting of charging parameters, diagnostic and data reports. Main features AC mains voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Setting Type: OLED Display: Current, Capacity and 7 pre-set Charging Characteristics Through PC laptop/USB port: advanced programming Data storage: report on the last 50 charges and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heat sink ...
Properties: Length 800 mm Width 330 mm Total height 770 mm Weight 22.4 kg Manufacturer ELMOR MORATTO - Italy Speed 905 min ̄¹ Installed engine power 1.85 kW Series: 03-13-5620.004 Connections: Input: DN 50 Output: DN 50
Uhlmann C 100 horizontal cartoning machine Modified 2025 - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Cognex 1D barcode and 2D matrix code reading system for leaflet and folding carton code - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump or Venturi nozzle
Gathering Machine Horizon VAC 100 a/c + SPF-200A + FC-200A Year of construction 2009 Art.Nr. L1103 Collector Horizon VAC 100 a + c Sewing Machine SPF-200A Trimmer FC-200A Turret "a" 2.08 million, trimmer 2.04 million
Mazatrol Smooth ai 5-axis simultaneous machining Max. Rotary Diameter 600 mm Max. turning length 850 mm Travel X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis -30 to 210° Main spindle Drive power: 11 kw Max. spindle speed: 6,000 rpm Spindle Nose: A2-5 Max. bar passage: 52 mm C-axis, 0.0001° Sub-spindle Drive power: 11 kw Max. spindle speed: 6,000 rpm Spindle Nose: A2-5 C-axis, 0.0001° Milling spindle Drive power: 12 kW Max. spindle speed 12,000 rpm 38 tool positions Capto C6 Coolant system -chip management Knoll KF150/950 Compact Filter System 70 bar high pressure pump Mayfran MT10 Chip Conveyor, Right Discharge Further equipment 5 Axis Machining Package for Smooth Ai -EIA/ISO 5-axis simultaneous machining F) Tool tip control 5-axis simultaneous machining Spline Fine Interpolation 5-axis spline interpolation Path Error Suppressi ...
1 press system, manufacturer Exner, type EXSBZRD 500/100, built in 2002, drive power 121 kW, pressing force 5,000 kN, overhauled in 2018, stroke length max. 600 mm, working speed max. 16/30 mm/s, machine weight 82,000 kg, table size approx. 1,000 x 3,000 mm, control system, manufacturer Siemens, type Simatic Multipanel, separate two-hand control, upstream light barrier, manufacturer Sick, separate control panel, manufacturer Rittal, control system, manufacturer Siemens, type OP17, feed unit, manufacturer AMT, type WV400/160, year of manufacture 2008,control panel, control unit, manufacturer Rexrodt, separate switch cabinet system, additional transfer unit/material feed, vertical material buffer, 6-fold feed-through unit, oiling, manufacturer Ratiol/Stöber Find more here - / Contact us at -
1 hydraulic double-column press (11), manufacturer: Exner, type EX100SBZR, built in 1988, power 42 kW, pressing force 1,000 kN, GG 11 Exner, type EX100SBZR, built in 1988, SN 10094, power 42 kW, pressing force 1,000 kN, GG 11,000 kg, overtravel 26 mm, table size approx. 900 x 1,100 mm, swivel chair, separate control panel, control system, manufacturer Siemens, touch panel, two-hand operation, manufacturer Sick, type XY2SB, front material feed, linear travel, approx. 1,000 mm Find more here - / Contact us at -
Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.
x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm CNC-control: Fanuc Oi-MD table-size: 1.100 x 500 mm max. table load: 700 kg spindle taper ISO: BT-40 spindle turning speed range: 12.000 U/min feed stepless: 24.000 mm/min rapid traverse: 36/36/30 m/min drive capacity - spindle motor: 15/11 kW tool change unit: 24 coolant: IKZ 20 bar chip conveyor: voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,35 x 2,20 x 2,67 m - Serial No..:M281361B5N D - NC-Indexing Device Manufacturer KITAGAWA, (Call by M-Command) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dynajet 1000 me, used, blue Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 427 h, Trolly, incl. gun, 10 m HD hose, 15° flat spray nozzle,
Two larger bar feeders with drum magazines and one smaller unit are available. 1) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 2) Kurt Breuning (IRCO) Profimat 65.8R/270.8, year of construction: 2008, guide channels: 8, max. material diameter: 65mm, max. bar length: 3200mm. 3) Kurt Breuning (IRCO) ILS RBK 10016, year of construction: 2005, max. material diameter: 100mm, max. bar length: 1600mm, height adjustment: approx. 250mm. Machine dimensions X/Y/Z: approx. 2350mm/1000mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Individual sale possible.
pressure: 110 t chamfer lenght: 4100 mm distance between columns: 3100 mm dayligth: 425 mm throat: 300 mm stroke: 225 mm working feed: 10 mm/sec return speed: 100 mm/sec table height: 900 mm oil volume: 260 l total power requirement: 11 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4400 x 1750 x 2500 mm Equipment: - Cybelec DNC 34 PC control system - Controlled backgauge 700 mm (X-axis) - Hydraulic tool clamping at the top - 2 support arms with sliding system - Upper tool - Lower tool - Side + rear safety device - 2 manual foot switches The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Manufacturer: Zerma Model: GSE 700/1000 Year of Manufacture: 2021 Inlet dimensions: 720 x 990 mm Rotor diameter: 700 mm Working width: 1000 mm 7 x 2 rotor blades 2 stator knives Sieve insert: 10 mm Ø Drive 75 kW, 1500 rpm, IP 55, 400 V, 50 Hz, IE3 The machine has not yet been assembled or put into operation and is therefore in mint condition. Feed Belt (Bias Belt 1) - Length (AA): 6000 mm - Width (GB): 980 mm - Drive: 1.5 kW - PVC stud belt with lower belt cover - Equipped with 2 × emergency stop buttons Switchgear - Load-dependent control - Mounted on a separate frame Extraction System – MFT 55/500 - Power: 11 kW - Pipeline: NW 200 mm Ø - Rack for bagging into double big bags - Cyclone: 800 × 2400 mm - Exhaust box with 12 exhaust hoses Metal Separator - NW 150 mm Ø - Quantity: 1 piece Fine Material Separator – Type FAS 500 - With MFT 30/300 blower (4 kW) - C ...
General SKU212T480 LocationBarneveld MakeOchsner TypeCNY 100-340 Main Features MaterialStainless steel Volume32000 Ltr. Motor11 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps PumpOchsner Number of pumps:1 Capacity32 m³/h With motor11 kW, 380-420/ 440-480 Volt, 1455 rpm MakeABB motors TypeMBT 160 M InletDN 100 Outlet70 mm Information Mach.No.49061 Mounted on framecheck Floorspace1,65x0,65 m Total height0,62 m Weight400 kgCentrifugal Pumps-Pumps > Centrifugal PumpsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
A CNC universal tool milling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/500mm, quill stroke: 100mm, tool holder: SK40, spindle speed: 3150rpm, feed rate: 2m/min, rapid traverse: 5m/min, max. workpiece weight: 400kg. Machine dimensions X/Y/Z: approx. 3900mm/3300mm/2100mm, weight: approx. 3300kg, control: Heidenhain TNC 150. An on-site inspection is possible.
General SKU396U1161 LocationBarneveld MakeAzo TypeVB 800 B Year of construction1996 Main Features MaterialStainless steel Volume2000 Ltr. Specified Features - Silo MaterialStainless steel 1.4301 (304) Silocheck Closedcheck Capacity2000Ltr (1000 Ltr. 2x) Diameter1100 mm Conical bottomcheck Flat topcheck With covercheck Manholecheck Outlet with vibro bottomcheck Outlet with valvecheck Information Extra Specificationsequipped with a dosing screw. Brand Azo. Type DFS100x 650. SilosAZOTanks > SilosBrand > AZO What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible.
General SKU366W1274 LocationBarneveld MakeSchallex No.15673 Year of construction1996 Pressure Working pressure1 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4552 Capacity1000 l Vessel sizesdia. 900x1300mm Dished frontscheck Manholecheck DN500 Top connectionscheck Outletcheck Max. temperature80°C Information Mounted on legscheck Floorspace0,9x1,3 m Total height1,50 m Weight500 kg Extra SpecificationsWith level sensorsPressure vesselsSchallexTanks > Pressure vesselsBrand > Schallex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...
material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU366W1263 LocationBarneveld MakeQVF Glasstechnik TypeVSV100 No.B14.31 Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 600x700 mm Dished topcheck Dished bottomcheck Top connectionsDN150 OutletDN40 Information Total height1,05 m Floorspace0,60x0,60 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU366W1273 LocationBarneveld MakeSchallex No.15673 Year of construction1996 Pressure Working pressure1 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4552 Capacity1000 l Vessel sizesdia. 900x1300mm Dished frontscheck Manholecheck DN500 Top connectionscheck Outletcheck Max. temperature80°C Information Mounted on legscheck Floorspace0,9x1,3 m Total height1,5 m Weight500 kg Extra SpecificationsWith level sensorsPressure vesselsSchallexTanks > Pressure vesselsBrand > Schallex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...
General SKU231U190 LocationBarneveld MakeRieter TypePrimo 100S No.10.006-8519 Year of construction2000 Main Features Motor3.5 KW Width100 mm Specified Features - Pelletiser MaterialMild steel Pelletisercheck Rotor width130mm Rotor diameter130mm Number of rotor knives1 Motor 3,5 kW, 400 volt Number of strands:4 Capacity30-90 kg/min Outlet200x140 mm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight620 kg CEcheck Floorspace1,3x1 m Total height2,2 mPelletisersRieterMills > PelletisersBrand > Rieter What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU201P040 LocationBarneveld MakePfaudler Werke GmbH Schwetzingen TypeBE-1000 without gearbox No.4084563 Year of construction2012 Material Lining materialGlass - Enamel (WWG-9115) Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume1474 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1474 Ltr Vessel sizesdia.1200x1020mm Dished topcheck Dished bottomcheck Manholedia.350x450mm (oval) Top connections(5x)dia.100mm, (2x)200mm Outletdia.100mm Max. temperature-25/230 Degr.C. Information Mounted on legscheck Weight1400 KGPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are we ...
General SKU418W1322 LocationBarneveld MakeThaletec TypeCE-400-1000-D80 No.633132 Year of construction2011 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume417 Ltr. Motor1.1 KW Specified Features - Stirring vessel MaterialGlass - Enamel Closed stirring vesselcheck Capacity416 l. Vessel sizesDia. 1000x600 mm Dished bottomcheck Manholecheck Top connectionscheck Outletcheck Max. temperature-60°C/100°C With propellor stirrercheck Motor1.10 kW, 380 volt, Speed mixing shaft44-221 rpm Information Mounted on legs+ Weight880 kg CEcheck Floorspace1,10x1,10 m Total height2,60 m ATEX compatiblecheckStirring vesselsThaletecStirring vessels > Stirring vesselsBrand > Thaletec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- ...
General SKU366W1232 LocationBarneveld MakeQVF Glasstechnik Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 500x1000mm Dished topcheck Dished bottomcheck Top connectionsDN80 / DN40 OutletDN40 Information Floorspace0,65x0,65 m Total height1,4 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU398U1175 LocationBarneveld MakeAtlas Copco TypeGV 100 Mach.No.1316839 Pressure Working pressure0.0005 Bar Main Features MaterialMild steel Volume105000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck High vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity105 m³/h With motor2,2 kW Information Year of construction2013 Total height0,35 m CEcheck Floorspace0,7x0,5 m Weight70 kgVacuum pumpsAtlas CopcoPumps > Vacuum pumpsBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU398U1169 LocationBarneveld MakeAtlas Copco TypeGV 100 Mach.No.1423888 Pressure Working pressure0.0005 Bar Main Features MaterialMild steel Volume105000 Ltr. Motor2.2 KW Specified Features - Vacuum pump MaterialMild steel Pumpcheck High vacuum, oil seal rotary vacuum pump Number of pumps:1 Capacity105 m³/h With motor2,2 kW Information Year of construction2014 Total height0,35 m CEcheck Floorspace0,7x0,5 m Weight70 kg Extra SpecificationsUNUSEDVacuum pumpsAtlas CopcoPumps > Vacuum pumpsBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU300P647 LocationBarneveld Makeunknown, manufacturing tag is missing Year of constructionunknown Main Features MaterialStainless steel Volume1000 Ltr. Motor7.5 KW Specified Features - Stirring vessel MaterialStainless steel Open stirring vesselcheck Capacity1000 Ltr Vessel sizesdia.1000mm x1500mm Dished bottomcheck Flat top sidecheck With covercheck Top connections(2x) dia.50mm Outletdia.70mm With jacket(but jacket has leakage) With paddle stirrercheck Motor7,5 KW, 400/690 Volt Information Floorspace1,5x1,5 M Total height2,7 M CEcheck Weight1000 KGStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in ...
General SKU300M410 LocationBarneveld MakeFuji Paudal Co.ltd TypeEXDFS-100 No.19034 Year of construction1988 Specified Features - Roll compactor MaterialStainless steel Roll compactors Granulatorcheck Flat diecheck Die sizes260 x 160mm Number of dies available:1 Die perforationdia. ± 3mm Motorcheck With variable speed drivecheck Trough sizes315 x 180mm With motorcheck With variable speed drivecheck With metering screwcheck Screw sizesdia. ± 100mm With hoppercheck Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,3x1,2 M Total height1,4 M Weight900 KG Technical specs Extra informationtrough sizes: 315 x 180 mm: screw dia. ± 100mm: die sizes 260 x 160 mmRoll compactorsFuji PaudalCompactors > Roll compactorsBrand > Fuji Paudal What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...
General SKU366W1271 LocationBarneveld MakeQVF Glasstechnik TypeVSV100 No.B15.32 Year of construction1996 Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity100 l. Vessel sizesDia. 600x700 mm Top connectionsDN150 OutletDN40 Information Floorspace0,60x0,60 m Total height1,00 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU366W1270 LocationBarneveld MakeQVF Glasstechnik TypeVSV100 No.B15.31 Year of construction1996 Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank MaterialBorosilicate Glass 3.3 Closed vertical tankcheck Capacity100 l. Vessel sizesDia. 600x700 mm Top connectionsDN150 OutletDN40 Information Floorspace0,60x0,60 m Total height1,00 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
maximum number of results exceeded
please refine your search
