dmc 100 used for sale

: 100 x 5 mm square edge steel: 16 x16 mm round bar steel: 18 mm L-beam: 100 x 8 mm dimensions: 400 x 290 x 280 mm weight: 35 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5 axis X-Axis 800 mm Y-Axis 800 mm Z-Axis 600 mm Interference circle diameter 1070 mm Distance Spindle Up to 823,5 mm Machine-Table Load 1000 Kg Maximum rapid travel X/Y/Z at TCP max 75 m/min Cutting-Tool Interface HSK-A63 Motor Spindle Power at CDF 25% max 50kW Engine Spindle Torque at CDF 25% max 187 Nm Machine weight 13000 kgs Wiring diagram: 2526-95-64934955 Resy Filtration system Model : 14-P00449-3 Serial : KBF- 452/500 Erowa pallet changer Model RobotEasy Serial number ERE1364 Year 2014 Weight 1300kgs Hyfra Pedia chillers Model sigma 7-s

MOBILE MIXER-MINCER, WOLFKING TYPE: SFG 150/100 + PORTIONER TYPE: PD200 Technical description: Material: Stainless Steel Mixer, type: SFG 150/100 Serial number: 59440, year: 1998 Power supply: 380 V, 50 Hz, 7.8 / 9 A, 3.7 / 4.4 kW Weight: 350 kg Outlet diameter: ?100 mm Mixer mill size: 1310 x 600 x 1500 mm Foot control Portioner, type: PD 200 Serial number: 59441, year: 1998 Power supply: 220 V, 50 Hz, 0,4 A, 35 kW Weight: 100 kg Band width: 200 mm Working width: 180 mm Dimensions: 1300 x 600 x 1140 mm

A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible.

A total of three counting and distribution machines are available for filling containers (pouches) to the exact number of pieces. 1) MTF Technik MR-S1, year of manufacture: 2017. 2-3) Two identical Lauper LQ 100, year of manufacture: 2007, control: IT 9000. Documentation available. On-site inspection is possible.

An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible.

A universal Illig double-stroke thermoforming machine is available. Form dimensions X/Y: 960mm/560mm, max. drawing depth: 280mm, max. panel dimensions X/Y: 960mm/560mm, motor power: 1.5kW, heating power: 16.3kW, heating zones: top and bottom. On-site inspection is possible.

A Bottero glass cutting machine is available. Cutting thickness range: 2mm-19mm, max. glass dimensions X/Y: 3650mm/2750mm, weight: approx. 1650kg. On-site inspection is possible.

A Schön swivel arm punching press and a Hang eyeletting machine are available. 1) Swivel arm punching machine Schön & Cie 8L, year of manufacture: 1973, pressing force: 18t, table dimensions X/Y: 900mm/450mm, swivel arm width: 350mm, stroke: 60mm, passage height: 83mm-183mm, oil capacity: 40l, weight: approx. 1200kg. 2) Eyeletting machine Constantin Hang 103 SCD KG, year of construction: 1993, machine dimensions X/Y/Z: approx. 600mm/1250mm/700mm, weight: approx. 50kg.

A dissolver basket mill combination machine VMA Getzmann is available. Connected load: 25kVA, flour chamber volume: 4l, container volume range: 75l-750l, product volume range: 50l-400l. The ceramic insert of the flour basket is defective and must be replaced. On-site inspection is possible.

A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On ...

A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible.

pressure: 100 t throat: - mm stroke: 8 - 116 mm total power requirement: 8 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: ca. 2,5 x 2,5 x 3,5 m No. 0778 Single-column eccentric press 1000 kN Stroke adjustment 8-116 mm, stroke rate 65/min, ram adjustment 80mm, Space requirement2.1x 1.7 x 3.1 m, Weight approx. 7500 kg Stand tiltable, 10°/20°/30° Working area: table 800 x 560 Drive: 8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 300 mm grinding length: 1000 mm centre height: 150 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5 x 3 x 2,2 m No. 4959 Universal cylindrical grinding machine STÖCKEL RSU 100 NC-T Working area: approx. Ø 300 x 1000 Drive: 4/1 kW Electronic handwheel Internal grinding device Coolant device with magnetic separator documentation External grinding spindle Wheel Ø 400 x 50 / 250 x 30 mm 4 kW / max. 1400 mi-1 Internal grinding spindle 1 kW / max. 1400 min-1 Swivel range: - Table : -6° / +10° - Grinding headstock 180° - Workpiece headstock -90° Space requirement approx. 5 x 3 x 2.2 m Transport dimensions approx. 6LM Weight approx. 5.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: SK 40 collet diameter: - turning speed range: Maschinenabhängig U/min drive motor: Antrieb durch Maschine kW distance spindle - column: ca. 800 mm total power requirement: - kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,2 x 0,8 x 0,8 m No. 4896: Vertical milling head SK 40 Make COLLET + ENGELHARD, mod. BN 100 ( BFfb 85 / 110 ) Support bearing 2 set of bevel gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 325 mm turning length: 1000 mm swing diameter over bed slide: 250 mm Swingdiameter in the bed bridge: 440 mm reus: 12 (85-2000) U/min tail stock: MK 3 quill stroke: 100 mm diameter of quill: 40 mm spindle taper: DIN 55027 Nr. 5 spindle bore: 32 mm feed: längs 0,006 - 1,77 m/min feed: quer 0,003 - 0,885 m/min total power requirement: 2,2 kW weight of the machine ca.: 770 kg dimensions of the machine ca.: 2150 x 950 x 1350 mm Furnishing: - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

round bar steel: 45 mm square edge steel: 40 mm L-beam: 120 x 13 mm flat steel: 500 x 12 mm punching pressure: 60 t throat: 510 mm : 500 x 12 oder 400 x 16 mm punch diameter: 27 in 17 mm punch diameter: 39 in 12 mm oil volume: 80 l total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: Arbeitsbreite 1100 mm pressure: 258 bar oil volume: 46 dm³ ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec total power requirement: 2,2 kW weight of the machine ca.: 970 kg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1 t clamping width: 810 mm Colour: 7016 RAL length: 1210 mm width: 810 mm height: 590 mm gear diameter: 175 mm dimensions of the machine ca.: 1370 x 840 x 605 mm Robust pallet trolley for the safe and easy transport of pallets in workshops, warehouses or factories -Made in Germany. - Four catch corners prevent the load from slipping during transport. - The pallet chassis is easy to move thanks to the castors maneuver. The transport can be carried out with low rolling resistance will. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

carrying capacity: 1000 kg number of suction cups: 8 suction cup dia.: 280 mm Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. is routed to the lifting device ne ...

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

control: SIEMENS 810D turning diameter over bed: 1000 mm centre height: 500 mm centre distance: 2000 mm turning dia. over face-slide: 700 mm spindle bore: 128 mm spindle taper ISO: DIN55027/11 spindle turning speed - stepless: 6.4-1600 U/min tailstock quill taper MT: 6 diameter of quill: 125 mm quill stroke: 280 mm feed - longitudinal/cross: 5000/4000 mm/min rapid traverse longitudinal and cross: 10/5 m/min dimensions of machine: 5600 x 2600 x 2800 mm weight: 9.1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 175 mm centre distance: 1000 mm grinding wheel dia. x width: 400 x 50 / 225 x 20 mm grinding wheel hole diameter: 127 / 76.2 mm grinding wheel turining speeds: 1500-2200 U/min cross slide - travel: 245 mm workpiece spindle head:: turning speed range - stepless: 6-600 U/min spindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 ° weight of the machine ca.: 3.1 t dimensions of the machine ca.: 2.85 x 1.75 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with CNC-path-control: HEIDENHAIN type: iTNC 530 for axes: 3 x-travel: 1020 mm y-travel: 560 mm z-travel: 600 mm table surface area: 1000x560 mm table load: 1.35 t tool magazin:: numbers of tools: 40 max. tool diameter: 76 mm max. tool-dia with free toolbox: 125 mm max. tool length: 305 mm max. tool weight: 7 kg milling head: spindle taper:: SK40 spindle turning speed - stepless: 100-10000 U/min Power: 12/18 KW feeds -stepless-: 16000 mm/min rapid motion -longitudinal/cross/vertical: 40 m/min dimensions of the machine ca.: 3x2.3x2.6 m weight of the machine ca.: 6.8 t 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1020 mm y-travel: 540 mm z-travel: 540 mm table-size: 1120x540 mm spindle taper:: BT40 spindle turning speed range: -8000 U/min tool change unit: 24x weight of the machine ca.: 5.2 t SIEMENS 810D Shopmill With NC dividing head HEIDENHAIN TS27 Measuring system HEIDENHAIN MP12 Measuring probe Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

sheet width: 2000 mm plate length: 1000 mm Punching capacity: 28 to weight of the machine ca.: 11.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number 006 Iveco generator set Generator mecc old Type: ECO 34-2s/4 Power: 100 KVA Hz 50 RPM 1500 AVR Control: MX 341 IP 22 Year of construction 2000 We estimate operating hours to be less than 500 hours Metrics: L: 2.35m W: 1.15m H: 1.45m Weight: 1200 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm table surface area: 600 x 210 mm spindle taper: SK 40 spindle turning speed range: 50 - 2600 U/min feeds: 9 - 450 mm/min quill stroke: 70 mm total power requirement: 5,5 kW weight of the machine ca.: 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW

centre height: 100 mm weight of the machine ca.: 30 kg dimensions: 300 x 250 x 400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for extracting oil mist., Nominal volume flow: 950 m³/h, noise level: 71 dB (A), number of revolutions: 2850 rpm, Dimensions W x D x H approx.: 525 x 592 x 781 mm, Weight approx.: 55 kg, Connected load approx.: 0.75 kW (400 V / 50 Hz),, colour: Grey

This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm | bottle height: 75-240mm | sorting speed: max. 100 bottles/min | machine stops automatically when the bottles are jammed due to photocell | MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter | Frame of stainless steel (SS304) | compressed air: 6-8bar | power: 220V, 2kW | machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machine ...

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stand-alone Auger Filler Desktop Version with PLC controlled with Touch Screen.Quick and easy programing with check weighing by customers separate weigher. - Specification: hopper volume: 8 liter | filling weight: 2-100g | Stainless steel version with servo motor | packing accuracy: 0,3-1% (depending on product and total weight). Packaging speed 30 cycles/minute | power: 220V, 0.4kW | machine dimensions: L720xW555xH990mm | weight: 80kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Bulk Bag unloading system. INCLUDING lifting crane (HITACHI), stainless steel version and INCLUDING screw conveyor (capacity 8-10t/h) | max. bulk bag size: L1200xW1200xH1100mm | 380V, 2kW | electric chain block speed: 10.05m/min | lifting speed: 6.8m/min | Machine dimensions: L3200xW1700xH5000mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Automatic multi-lane filling and capping machine for cups, containers or trays incl. film sealing unit. Suitable for various container sizes, shapes and materials (e.g. PP, PS, PET, paper, laminated films, etc.). Equipped with 6 piston pumps for dosing of liquids and past-like products. In general, the line can be configured for all types of (separate) dosing systems for fresh or dry, chunky products, granules or powdery products (price adjustment may be necessary). This allows perfect filling and packaging of instant meals, pasta, pasta, fresh or dried fruits, snacks, soup powders, frozen meals, yogurt, ice cream, jam, etc. Automatic operation from feeding the containers/cups, filling, sealing with film and capping with a lid. Easy operation due to touch screen monitor, stainless steel version (SUS304), easy to clean. Other features: print mark sensor, stirrer for hopper, level sensor,  ...

Labelling machine for labelling various packages or products such as boxes, bags, cartons. - Specifications Labeller: Label width: 15-130mm, or customized | product dimensions: L(50-250)xW(80-300)xH(0.1-30)mm, customized adaptations possible | max. speed of the machine in neutral: 100 cycles/minute | power: 1kW, 220V | machine dimensions: L2000xB600xH1750mm | weight: 250kg. Module for hot stamping for BBD, batch number etc. optionally available. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Metal Detector to check vertical falling products. The product is passed from above through a hopper. Ideal to combine with multi head weigher and vertical packaging machine. Stainless steel framework, touch screen. - Specifications: detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size: ? 100mm | power: 220V/0.05kW, 50Hz/60Hz | dimensions and weight: L50xW50xH40mm, 45/145kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework | weight of product: max. 1kg | detecting speed: 0.17-1m/sec | detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size WxH: 150x100mm | max. passing size WxH: 110x60mm | power: 220V/0.15kW, 50Hz/60Hz | dimensions and weight: L940xW500xH1198mm, 100/200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute | suitable for volumes from 200-1000ml | accuracy: +/- 1.5% | max. film width: 320mm | bag width: 100-160mm (depending on pouch type) | bag length: 95-165mm | 0.7m?, 6bar | 380V, 3.9kW | machine dimensions: 1700x1100x2950mm | weight: 720kg. That machine/system is available in different version ...

Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout caps. The production process is fully automated from bag feeding, filling, cleaning the spouts, feeding the spout caps via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g ...

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 500-10,000g | filling hopper capacity: 100 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 2.75kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Auger dosing unit for powder. Dosing by rotating auger. - Specifications: filling range: 5-1000g | filling hopper capacity: 30 liters | hopper with side opening | stainless steel 304 design | power supply: 220~415V | power consumption: 1.4kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Volumetric cup filler for free-flowing granular products (rice, salt, sugar, etc.). - Specifications: filling range: 1-100ml | volume of hopper: 30L | number of dosing cups: We select a suitable cup version for you (1 or more heads) according to your product and the required filling quantities. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 1000-1500kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 30L/min | power supply: 220V | power consumption: 5.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Capping Module to press caps onto containers. - Stainless Steel version (SS304) | max. speed of the machine in neutral: 120 cycles/minute | cap diameter: 15-100mm | container/bottle diameter: 35-140mm | container/bottle height: 50-300mm | 220V, 2.7kW | machine dimensions: L2800xW900xH1880mm | weight: 400kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.