dmc 100 used for sale

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Material: DIN 1.4404 / AISI 316L - Surface : 3D (BA) Dimensions: - Width: 1475 mm - Depth: 2750 mm - Height: 3700 mm - Ground clearance: 500 mm Design: - Rectangular manhole 310 x 420 mm - Residual drain butterfly valve DN 40, Friedrich no. 2 - Clear drain Angled seat free-flow valve DN 40, Friedrich no. 2 - Clear drain butterfly valve and swivel elbow DN 40, Friedrich no. 2 - Level indicator - Cooling plate - Handwheel taster - Dome NW 400 mm with swivelling cover

Welding Rotator SARAZIN type HD 100 Maxi loading capacity: 5000 KG Shelf diameter: Ø 1500 mm Shelf diameter with external extensions: Ø 2100 mm Tilting: de 0 to 135° New electrical panel with speed variator Voltage: 380 V Length: 2600 mm Width: 2200 mm Total height in height position: 1700 mm Weight: approx 4 T

Inv. Num. : 8246 Type: XR 1000 Producer: Hardinge Generated: Parameters: Control system: iTNC530 Work table length: 1200 mm Work table width: 600 mm Speed: 12000 1/min X-axis travel: 1020 mm Y-axis travel: 610 mm Travel travel Z-axis: 610 mm Machine weight: 7000 kg

Complete baking line capacity: 1000kg/hour. Consisting of: Stainless steel vibrating supply hopper dimensions approx. 1950x1400x1350mm; Conveyor transport belt belt width 400mm; lift height 1900mm; Stainless steel baking oven inlet width approx. 700mm; min. product layer thickness approx. 40 mm max. product layer thickness approx. 70mm; Baking oven equipped with lifting mechanism oven dimensions approx. 6500x1400 mm; Stainless steel cooling tunnel dimensions approx. 3450x1000x1850 mm equipped with metal mesh belt and axial fans; Stainless steel glazing unit salt/glaze belt with agitator on mobile frame; Mobile flavoring dispenser working width approx. 800 mm; Mobile conveyor big-bag transport belt with supply hopper belt width 250 mm height approx. 2800 mm; Stainless steel controling panel; Video of bakeline in process available. Request video by contacting seller.

The scope of delivery includes: 01x U-profile, used Material colour: orange Overall length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | Pcs.: approx. 26.31 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

- Baking Plate Amount: 100 Baking Plates - Baking Plate Size: 212 x 240 mm - Capacity: max. 5.700 pieces / Hour - Cone Size: max. 190 mm - Engraving: 10 x 10 mm Equipment: - incl. Drum Roller - incl. Cooling Tower - incl. Packing Conveyor approx. available in July 2025!

Technical data of the pallet rack stand: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: RAL5015 sky blue Stand Type: PNFB 12 Profile dimensions: 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Drf2Qd Footplates The stands are pre-assembled (screwed truss) Frame height: 1,750 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Tank crest: Airlock DN50 Front: Clapper bottom Manhole 350x450 mm oval Tasting tap Nozzle Flap Size 37 DN100 forward-drawn outlet surround with DN32 disc valve Properties: Volume;: 2100 L Material: V2A (AISI 304) 1.4301 Design: horizontal Last Use: Food Length: 1750 mm Cylinder length: 1000 mm Diameter: 1400 mm Surface inside: 2B=IIIC ground Surface outside: 2B=IIIC ground Important: Tanks are without a base. On request base or feet in V2A - for an extra charge.

Berghof High Pressure Reactor Type BR-1000 composed of: Stainless steel reactor BR-1000 with lid (6 inlets with rupture disc, valve, temperature and pressure sensors for control and recording) and 2 Teflon liners, each 1 liter reaction volume BHM-1000 Heating jacket Temperature controller BTC-1000 with interface to Windows software for programming, visualization and data recording Large number of reusable Teflon seals Hardware The device is used but fully functional

Staral 190 Ø 380 x 1000 mm Distance between centers: 1000 mm Swing over bed: 380 mm Swing over cross-slide: 220 mm Diametre of main spindle bore: 38 mm Number of speeds: 29 > 1500 rpm

Key data: 190 mm

Stock No: 3764 CNC LATHE Manufacturer: Mori Seiki, Type: ZT 1000Y Machine NO.: ZT101CB0056, Year of manufacture: 2003 Specifications: Max. circumferential diameter 190 mm dia. Max. turn. About BED 250 mm DIA. Main motor power 22/18.5 kw Main spindle speed range 6000 rpm Hole through drawing tube 46 mm dia. C axles 0.001 Y axis 40+/- mm Z Aksen Rapid Traverse 1/2 - 24 m/min Tool turret 1 with 16 stations Motor power driven tools 5.5 / 3.7 / 2.2 kW Kw Tool turret 2 with 16 stations Powered tools. 6000 rpm Sub-spindle Sub-spindle speeds 6000 rpm Control MSX-501 Fabr. Power on 15088 hours Operating hours spindle 5080 hours Controlled in 5+2 axes Accessories: Load and Unload device Hydr. Chuck main spindle 169 mm dia Hydr. Chuck Subspindle 169 mm dia Tool setter Weight: 5000 kg

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m Ready for delivery, with 12 month warranty in germany and neighbouring countries! Geometrically overhauled and repainted with new electrics. In KELLENBERGER quality! -Digital display in 2 axes. Resolution x-axis 0.5my -Modern workpiece headstock with cone  ...

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: K The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Frame height: 2,000 mm Frame depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

for 100-600 g , 350 - 1000 g

for 100 - 600 g, 350 -1000 g

Technical data of the pallet rack stand: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: creamy white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Column height: 9,000 mm Stand depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Vacuum diaphragm press Wemhöner type VARIOPRESS model Basic 1000 S Specifications: Heating plate format (mm): 2850 x 1550 Electric heating plate design: aluminium top heating plate Total pressing force (kN): 2400 Chamber pressure max. (bar): 6 Operating temperature max.: 180 degrees Celsius Batch or workpiece size max. (mm): approx. 2460 x 1180 Thermoplastic film as roll goods: Width of the film: approx. 1430 mm Thickness of the foil (mm): approx. 0.25 - 1 Hyperbaric chamber height (mm): max. up to 180 Connected loads: Installed power (kW): approx. 46 Required air pressure (bar): approx. 8

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Splicing machine with glue thread Make: Casati Type: Z 1000 New machine Technical details: Arm length: 1.000 mm Veneer thickness: 0,4 - 1,5 mm Feed speed: 8 - 18 m/min. Overall dimensions: 1.350 x 500 x 1.300 mm Equipped with: - Key pad of the electronic control device for the heating temperature setting - Electronic digital read-out for an accurate monitoring of the heating temperature - Handwheel of the motor speed control for the stepless adjustment of feed speed - Knob of the motor speed electronic control for the stepless adjustment of oscillation angular speed of the heating arm independent of the linear feeding speed (zig-zag pitch) - Glue thread heater by electric resistance - Electronic adjustment of the heating temperature of the thread with accuracy ± 1°C - Electronic unit with stored control program - Separating fence with pressure wing - Holder of t ...

CONTROLS   PLC SIEMENS S7-400 PRESS DESIGN   drive system: hydraulic   number of suspensions: 1   slide ejectors / cushion: no   table cushion: no   opening in table: no   feedstock transport direction: back-front PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 2066 mm   table surface (front-back): 2000 mm   height above floor level: 630 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 600 mm/s   working velocity min.: 15 mm/s   working velocity max.: 40 mm/s   return velocity max.: 390 mm/s   return force: 100 to TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1710 mm   distance table - slide max.: 1700 m ...

PRESS DESIGN   drive system: knuckle-joint   frame design: H-frame, monoblock SLIDE   total force (nominal): 160 to   stroke: 60 mm   stroke rate (max.): 72 /min COUNTER RAM   nominal force: 40 to   stroke: 60 mm V-RING   nominal force: 50 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 470 mm   lower table (front-back): 470 mm   upper table (left-right): 500 mm   upper table (front-back): 470 mm   shut height max.: 277 mm   ram adjustment: 80 mm   distance between columns (H-frame): 500 mm   passline opening (free passage in side columns): 220 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 210 mm   sheet thickness max.: 6 mm   feeding step max.: 180 ...

ELECTRICAL SPECIFICATIONS   total power consumption: 57 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4900 mm   space requirements -front/back-: 2600 mm   total height: 2600 mm   total weight approx.: 2600 kg Washing medium: solvent-free basket/rack size     790 x  590 x  600 mm cabin dimensions    1200 x 1200 x 1200 mm useable volume       800 x  780 x  900 mm net weight of batch            ;     200 kg Attachments: Dosing unit DOSANTEC A763-168M buffer tank 100 ltr Waste water tank 75 ltr rotating spraying cross from top rotating spraying cross from bottom Drying device  ...

Coil weight: 1 ton Material width: 150 mm Coil exterior diameter: 1200 mm Expansion range: 480 - 520 mm Thickness: 0,5 - 4 mm

The scope of delivery includes: 01x Stand protector, used Manufacturer: Nedcon Material color: blue Drhw0R Total height: approx. 900 mm Stand protector height: approx. 800 mm Total width: approx. 110 mm Inner width: approx. 102 mm Total depth: approx. 45 mm Material thickness: approx. 4.00 mm Leg size: approx. 65 x 65 mm Height deflector: approx. 50 mm Drill hole spacing: approx. 60 mm Drill hole diameter: approx. 11 mm suitable for frame profile width: 100 mm including mounting material composed of: 04x Hexagon Bolt M 10 x 35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately d ...

Harrison M400 Ø 430 x 1000 mm Distance between centers: 1000 mm Swing over bed: 430 mm Swing over cross-slide: 254 mm Diametre of main spindle bore: 65 mm Power on main spindle: 7,5 kW Number of speeds: 10 > 2000 rpm Length: 2740 mm Width : 1000 mm Height: 1270 mm Weight: 2 ton

turning diameter: 1000 mm turning length: 4000 mm turning diameter over bed slide: 680 turning speeds: 0 - 1400 U/min control: Siemens 810 D tool turret - number of stations: 2 centre distance: 4000 mm drive motor: 30/37 kW Torque: 4140 Nm bed width: 550 mm max. workpiece weight between centres: 4800 kg max.workpiece weight:each extra steadyrest: 700 kg spindle diameter in front bearing: 150 mm spindle bore: 104 mm total power requirement: - kW weight of the machine ca.: 12 t dimensions of the machine ca.: 7 x 2,8 x 2,16 m equipped with: - CNC control Siemens 810D ShopTurn - jaw chuck - steady rest - 2-fold steel holder 23500h switch-on hours, 9300h spindle running hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1994 1 pipe reactive law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1.000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water content full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

Manufacturer: KUKA Model: KR 100-2 PA Year of Manufacture: 2009 Weight: 1240 KG Work Area Dimensions: - A: 2,180 mm - B: 3,037 mm - C: 3,200 mm - D: 2,160 mm - E: 1,040 mm - F: 1,350 mm Total Volume: 72.7 m³ Techincal Details: - Maximum Reach: 3,200 mm - Payload Capacity: 100 kg - Additional Load on Arm/Swing/Carousel: 50 kg / ~200 kg - Maximum Arm & Swing Load: 50 kg - Total Maximum Load Capacity: 350 kg - Number of Axes: 4 - Mounting Position: Floor-mounted - Design: Standard - Position Repeatability: ±0.25 mm - Path Accuracy: Not specified - Controller: KUKA KRC2 Edition 2005 - Weight (Without Controller): Approx. 1,200 kg - Operating Temperature Range: +10°C to +55°C - Protection Class: IP65 (Dust & Water Resistant) - Installation Footprint: 1,006 mm × 1,006 mm - Power Supply Requirement: 13.5 kVA - Noise Level: < 75 dB

x-travel: 600 mm y-travel: 270 mm z-travel: 430 mm : 630 mm table-size: 1120 x 270 mm spindle turning speed range: 45 - 1660 U/min spindle taper: SK 40 control: konventionell spindle motor: 2,2 kW total power requirement: 2,4 KVA weight of the machine ca.: 1,35 t dimensions: 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Transporband 1000 X 780 mm, Working length mm: 1000, Working widht mm: 780, Total hight mm: 920, Total power kW: 0,7,

Manufacturer: Biesse , Type: Skipper 100, Year: 2005, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2005

Manufacturer: Biesse , Type: Skipper 100, Year: 2007, Control: CNI, Online connection: möglich, Machining stations: 2, Work piece width min-max mm: 150-1000, Work piece length min-max mm: 250-3000, Work piece thickness min-max mm: 10-60, 3 axis control: yes, Vertical drilling station from below: 1, Vertical drilling station from above: 1, Double part drilling: yes, Milling spindles vertical: 2, Power kW 2: ca.4, RPM min-max 2: 1800-24000, Vertical drills-X: 13 von unten und oben, Drill vertical Y: 5 von unten und oben, Horizontal drills-X: 4, Drill horizontal Y: 2, Year :2007

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Serial number: 02751,

Hersteller : Hitachi Umrichter, Type: L 100, Card number: 463PT19123, Free text 1: Input 50/60 Hz , Free text 2: 200-240 Volt, Free text 3: 16 Ampere,

Manufacturer: Kaeser Vakuumstation, Type: BSV 100, Year: 2006, Saugvermögen m³/h: 1,0 bar, revolutions rpm: 3000, Operating hours: 76281, Revolutions of main rotor U/min: 3000, Year :2006

Manufacturer: Böhl Wickelmaschine, Type: Meister S 100 +FM, Year: 2005, Control: ESA, Work piece width min-max mm: 300-850, Min.-max. workpiece length in mm: 1500, Min.-max. workpiece height in mm: 50-500, Belt conveyor: 6 Meter vorlegeband, Ausrichtstation: yes, Width:165 to 250 mm: yes, Automatic product recording: yes, Belt tension adjustable: yes, Function repeat: yes, Min. cycle rate: 4, Feeding belt L x W x H mm: 2500, Year :2005

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: Wiwa Leimpumpe, Type: 10018, Year: 90/630310, Volume flow m³/min: 10, Compressed air min/max bar: 8, Year :90/630310

Manufacturer: Formoplast, Type: PE 100 Doppelwandbehälter, Year: 2014, Durchmesser m: 2,5, Zulässiges Füllvolumen m³: 15, Zulässiges Füllhöhe m: 3,06, Zulässiges Füllungsgrad : 95 Prozent, Betriebstemperatur Grad: 20, Befülltemperatur Grad: 30, Zulässiger Volumestrom m³/h: 72, Zulässiges Belastungswert kN/m³: 15, Füllmedium: Kauritleim, Aufstellung: im Raum, Year :2014

Manufacturer: Europress, Type: 1000 VE, Power kg/h: 35 m³/h, Supply case m³: 0,53, Hydraulikal power kW: 5,5, Ballenpresse: yes, Pressdruck kN/ to: 300, Einfüllöffnung b x h x L mm: 700 673, Ballenmass b mm x l mm x h mm : 500 x 650, Ballengewicht kg: 50 - 200, Year :2001

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Haffner , Type: SL 100, Year: ca.1980, Work piece width min-max mm: 550-1050, Face plate aggregate: yes, Key hole boring aggregate: yes, Clamping hight max. mm: 1050, Trench deepth max mm: 150, Trench lenght max mm: 315, Vertikal spindles: 1, Horizontal spindles: 1, Milling chain motor Kw: ca.1,0, Milling widths stop system: 315, Total power kW: 1,5, Lifting device: Pneumatisch, Year :ca.1980

Manufacturer: Indramat, Type: Indramat KDW 1.1-100-300-W1, Frequenzumrichter: yes, Motor: MAC 112C-ED-HC, Current (A): 100/100,

Manufacturer: Indramat, Type: MOD 3/1 X 003-334<CRLF>KDS 1.1 100-300-W1/220, Produktionsnummer: 237-787 B 12.065, Frequenzumrichter: yes,

Manufacturer: Indramat, Type: KDS 1.1-100-300-W1, Modell: 3/1x110-006, Seriennummer: 02758, Current (A): 100/25, Operating rpm: 3500/Ma0.025V/8, Gebraucht: yes,