dmc 100 used for sale

Grinder mill with blades, cutting chamber: 1000x900 mm, motor: 55 Kw (75 hp), open rotor, 4 rows of blades on the rotor, 3 side rows, scissor cutting. With electrical panel.

Agglomerator Brand: Prat, engine: 150 hp, tank: 1000 L.

conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFT -Speed: m/min -Conveyor belt length: 1400 mm -Belt spacing: 560 mm -Conveyor width: 1000 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1450/1350/H750 mm -Weight: 135 kg

conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: conveyor belt with underframe -Speed: 23 m/min -Belt width: 100 mm -Conveyor length: 1040 mm -Total dimensions: 1040/350/H670 mm -Weight: 26 kg

Forklift attachment, crane arm, load arm -Manufacturer: Meyer, crane arm load arm for forklift trucks -Load capacity: 1000 kg -Mounting: Forklift, dimensions see photos -Dimensions: 1800/840/H980mm -Own weight: 83 kg

The WELGER SB 100 is a German baler for waste paper, foil and other materials and waste. Length of machine, without bale chute 3.380mm Width 1,120 mm Height 1,760 mm Table height 990 mm Table width 600 mm Press force 4.3 tons Time per working stroke 6.7 sec Capacity/throughput 0.75 t/h Bhm8ggch Bale size 600mm w x 375mm h x length 600-1200mm Binder Plastic Yarn Power supply: 400 V/5.5 kW Weight: 40-60 kg Machine weight: 1000 kg ATTENTION- BONUS! A second such machine for spare parts is EXTRA included.

Electric motor, three-phase motor -Manufacturer:TH.Halter, electric motor type DI 100 L-2 -Power: 3 kW -Speed: 2880 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Protection class: IP54 -Dimensions: 365/195/H235mm -Weight: 21 kg

Used HAPPLE control screen sieve machine in good condition Screen basket 400 x 1000 mm n=270 rpm, with spare sieving basket Power 4 kw

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Nord, gear motor -Type: SK 30-100L/40 i= 4.29 -Speed: 326 rpm -Engine: 3 kW / 1400 rpm -Shaft: Ø 40 x 80 mm -Dimensions: 550/260/H310mm -Weight: 45kg

Collision protection, ram protection, shelf protection, column protection, column collision protection -Manufacturer: A-SAFE, collision protection pillar protection spacer 2 pieces -Type: R-01-01-0011 150 mm Spacer -Delivery/Price: complete -Dimensions: 230/180/H600 mm -Weight: 2.2 kg/piece

Key data: 1050 mm, 3 mm, 1000 mm

Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized backgauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened Operating instructions Weight: approx. 1400 kg

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

electric motor, three-phase motor -Manufacturer:Elmot-Schäfer, electric motor type ESHE 100LB-4 -Power: 3 kW -Speed: 1440 rpm -Shaft: Ø 28 x 60 mm -Design: B5 -Protection class: IP55 -Dimensions: 370/250/H280 mm -Weight: 37 kg

power converter, power supply, power pack, switching power supply, power supply, switching power supply, power supply -Manufacturer: Balluff, power supply switching power supply -Type: BAE0002 BAE PS-XA-1W-24-100-004 -technical data: see type plates photos -Dimensions: 120/85/H130 mm -Weight: 1.4 kg

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: T (Thyssen) Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 14,100 mm Number of bays per row of shelves: 05 pcs. á 2,700 mm Number of levels plus floor level: 02 pcs. Volume Specifications: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 45 pcs. Total pallet spaces: 45 pcs. Started from: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material color: blue Profile dimensions: 100 x 65 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 2,200 mm high 1,100 mm deep 20x Pallet rack trusses, used Ma ...

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Used filling tank with a capacity of 1000 kg. The tank has an agitator and a heating jacket.

Treif Felix 100-CE dicing and strip cutting machine Performance max. 0.8 t/h Including one grid set for cubes (consisting of two single grids) Including cutting knife Max. cutting-off length 0.5-32 mm Click & go quick change gridset system Refurbished condition

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 315/160/H30 mm -Weight: 1.0 kg

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of feeders: 6 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compressors, screw compressors, compressor coolers, compressor coolers -Manufacturer: Steeb-Industriekühler, compressor cooler with filter from screw compressor BlitzTyp Monsun 7.5 P -Art.No.: 100213 -Dimensions: 455/350/H190 mm -Weight: 8.1 kg

serial no.: 9174 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t throat: 345 mm stroke: 20-100 mm no. of strokes: 60 Hub/min ram - range of adjustment: 85 mm table surface area: 980x650 mm ram surface: 600x440 mm hole in the table: Ø 200 mm table height: 820 mm tool hole in ram: ¤7 65 mm weight of the machine ca.: 7 t dimensions of the machine ca.: 2000x2000x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity 3 ton/hour Motor power 200Kw Die diameter 1000 mm Number of rollers 5

FEINTOOL GKP F 100T fine blanking press was manufactured in Switzerland in 1974. The machine, distinguished by its robust, stable design, can perform several demanding machining steps in one precise process, saving time and labour. Workpieces with a maximum thickness of 6 mm thus achieve an extremely even surface and precisely defined edges that are impossible to achieve on other machines. The machining process can be fully automated when the FEINTOOL GKP F 100/160 hydraulic blanking press is retrofitted with a sheet metal feeder. The total weight of the machine is approximately 9 tonnes. Technical data of the FEINTOOL GKP F 100T hydraulic press - maximum workpiece thickness: 6 mm - maximum sheet metal width: 210 mm - total force including auxiliary functions: 160 t - shearing force: 100 t - hydraulic counterweight force (upper table): 1-40 t - hydraulic force of ring jaw (lower ...

Alexanderwerk WRN 100 Planetary Agitator  High-performance stirring and beating machines for professional use. With 100 litre mixing bowl, plastic protective screen • Stirring, beating and kneading of doughs, meat and frothy masses • Stirred tank capacity 100 liters volume • Fixed protective shield made of plastic  • 400 V, 50 Hz • incl. stirrer, broom and dough hook Application Kneading, mixing, stirring, beating More items new and used - can be found in our shop! International shipping costs on request!

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 22 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 100/25/H21 mm -Weight: 0.3 kg

Combination with the Intermac CNC Crease Grinder Groove 1500 (no. 23020) - Serial Number: 90147 Weight: 200 kg Power: 0,8 Kw + internal extraction Length mm: 900 Width mm: 1000 Height mm: 1700 Working height: 1200 Transport size L x W x H: 0,9 x 1,0 x 1,7 Number of spindles: 1 spindle Condition machine : Good Control type: Manually Electric. Connection: 16A 3P+N+PE - For more information, please mail us: salestecfort.nl

Airless sprayer, painting device, spray pack, paint sprayer, paint spray system -Manufacturer: Wagner, paint sprayer paint spray system -Type: W 100 -Use: for varnishes and glazes -Area performance: 5 m² / 12 min -Dimensions box: 300/140/H260 mm -Weight: 1.5 kg

conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Conveyor belt stainless steel with mesh belt -Speed: 27 m/min -Conveyor belt width: 420 mm -Conveyor belt length: 1000 mm -Motor: DRdrives 0.18 kW see photo nameplate -Dimensions total: 1010/700/H185 mm -Weight: 36 kg

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

three-phase motor, electric motor -Manufacturer: Loher, electric motor type A 100L1A-12/4 -Power: 0.18/0.55 kW -Speed: 465/1475 rpm -Shaft: Ø 28 x 60 mm -Protection class: P 33 -Dimensions: 385/275/H250 mm -Weight: 31.5 kg

CINCINNATI ARROW 2 1000 CNC WITH LOW HOURS WE OFFER AN NICE CONDITION VERTICAL MACHINING CENTRE YEAR 2003 WITH EQUIPMENT CONTROLS: GE-FANUC SERIES 18I-M CONTROL Table: 1,120 x 610mm TRAVELS: X : 1,020mm, Y : 510mm, Z: 560mm. Rapid Traverse : XYZ=24m/min. Maximum Cutting Feed : 15m/min. Maximum Spindle Speed: 8,000rpm. Spindle Taper BT40. 20 Position ATC. MACHINE WILL BE AWAILIBLE FROM BEGINING FEBRUARY 2024

try square, locksmith square, hair square, precision hair square -Manufacturer: USSR, stop angle 1000 x 633 -Type: ROCT 3749-65 -Dimensions: 1000/633/33 mm -Weight: 12.4 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank, Ø 925 x 9 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 860 x 5 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 22 kg

-extendable spiral mixer Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left-hand rotation - Stainless steel spiral and guide rod -with 2 stainless steel boilers -per cauldron for max. 100kg flour or for max. 160kg dough -Boiler manual locking -Machine is equipped with 2 new timers

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

Control ? Heidenhain Grinding lenght 1000 mm Gentre height 175 mm Dimension grinding wheel 400 mm Speed of grinding spindle 2000 rpm internal grinding attachment with rotation speed 20000 rpm, with grinding flange, measuring probe taster, machine has s

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 805 x 5 mm -Inside: Ø: 100 mm -Hole circle: Ø 200 x 30 mm / Ø 160 x 27 mm -Number of teeth: see photo -Weight: 18 kg

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diametr: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l p

Control: Max.travel range: X 800 mm Y 850 mm Z 500 mm Wave length:1,06 um Average power:100 Watt Max. peak pulse power:9 kW Laser crystal:Nd:YAG Made in Germany

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 3 boxes -Type: 3.4 x 100 Smooth Bright -Art.No.: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H340 mm -Total weight: 47.1 kg

electric motor, three-phase motor -Manufacturer: ATB Bauknecht, electric motor 100L Ex-protected -Type: EAY 100L/4C-12 -Power: 2.5 KW -Speed: 1420 rpm -Shaft: Ø 28 x 60 mm -Design: B3 -Protection class: IP54 -Dimensions: 365/250/H205 mm -Weight: 25 kg

roller conveyor, conveyor track, roller conveyor belt, roller track -Roller conveyor: with tiltable middle rail and end stop -Total length: 2000 mm -Roll width: 1000 mm -Rollers: Ø 80 mm -Roll spacing: 100 mm -Transport dimensions: 2390/800/H1580 mm -Total weight: 140 kg

Control: SIEMENS 840D Max.turning length: 350 mm Max swing diameter over bed/slide: 320 mm/152mm Workpiece diameter: 310 mm Material passage through the spindle: 0 mm Rotation speed(max.) 6000 rpm Quick Change Toolposts:8 Taper ? VDI20 Coolant tank:80l

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany