dm used for sale

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

x-travel: 1250 mm y-travel: 850 mm z-travel: 800 mm Control: Heidenhain MillPlus total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm table surface area: 1000 x 600 mm spindle taper: HSK 63 A spindle turning speed - stepless: 18.000 U/min feeds x/y/z -stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min no. of tools in magazin: 2 x 12 workpiece diameter at full load: 130 mm tool length - max.: 315 mm weight of tools max.: 8 kg internal coolant system feed: 40 bar control: HEIDENHAIN control: MillPlus iT table load capacity: max. 500 kg total power requirement: 52 kVA weight of the machine ca.: 6,5 t dimensions of machine L x W x H: 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640, electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

turning diameter: 100 mm turning length: 75 mm control: FANUC Oi-TF total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1998. This DMG Mori Seiki CL-200B features an X-axis travel of 398 mm and Z-axis travel of 214 mm. It is equipped with a Renishaw tool setter and a workpiece catcher that has never been used. The machine has approximately 10,000 operating hours and has always been operated in a single-shift environment. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki CL-200B machine we have for sale. Contact us for further details.

This DMG MORI CLX 350 V3 was manufactured in 2023. A universal turning machine featuring driven tools and a C-axis. It includes a hydraulic 3-jaw chuck D210mm, a 12-slot servo tool turret holder VDI 30 with 12 driven tool stations, and a hollow clamping device with a max. bar capacity of D65mm. A great opportunity to buy this DMG MORI CLX 350 V3 universal turning machine. Contact us for further details regarding this machine.

turning diameter: 465 mm turning length: 1050 mm control: Heidenhain x-axis: 300 mm total power requirement: kW weight of the machine ca.: 7600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details.

PART NUMBER 7967 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 170mm 2 generators: 1) Metal corrugated roller for calibration 2) Grooved rubber roller + boot + metal roller – in advance: - Rubber roller, sliding - generator (two generators on one motor) 15kW - Rubber roller, sliding - Rubber Output Roller - blowing the tape – from below: - 2 metal sliding rollers - pulling tape - Rubber rollers, sliding 2pcs - pneumatic oscillation of belts - grinding thickness potentiometer - electric table top lift + manual (for precise adjustment) - air brake - 2 types of feed speed - working pressure 6-8bar - Diameter of the extraction port 2x140mm - overall dimensions l/w/h 1830x1670x1950mm - weight 1160kg ADVANTAGES – Italian production – 2 grinding units – unpainted – used grinder, perfect condition Net price: 77900 PLN Net  ...

This 3-axis DECKEL DMU 60 E was manufactured in 1998. It features a spindle speed of 12,000 rpm and an impressive X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine includes a fixed angle table with a clamping surface of 1000 x 542 mm and a 25-position double gripper tool changer. If you are looking to get high-quality machining capabilities, consider the DECKEL DMU 60 E vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. Its well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine.

This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details.

Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible.

GeneralCNC Grindingmachine; Control: Fanuc 32iB Rotary dresser (with diamond, for O.D./face)Rotary dresser (with diamond, for O.D./face) Rotary dresser has multiple diamonds, so it has a longer life than a single point dresser. It is not applicable to dress a back face of a wheel. When CBN wheel is used, also selecting Rotary dresser with AE sWheel rear face dresser (combination use with rotary dresser)Wheel rear face dresser (combination use with rotary dresser) This option helps to dress a rear face of a wheel which cannot be ground with a rotary dresser. Please consider selecting this option when a rotary dresser is selected.Clamping fixture for face plate (3 pcs. for clamping, 3 pcs. for centering)Clamping fixture for face plate (3 pcs. for clamping, 3 pcs. for centering) 3 pcs. of face clamper and 3 pcs. of centering adjuster for face plate. It is suitable for clamping flange shape  ...

This 7-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details.

Chiron FZ16e CNC Milling Machine Milling Machine Tool Milling Machine Manufacturer [manufacturer]: Chiron Werke Type [ type]: FZ16e Construction year: 1987 Control unit: Siemens Sinumerik System 3 Travel X/Y/Z approx. 500 × 250 × 425 mm Table size approx. 850 × 550 mm Table load approx. 200 kg Spindle speed 20–7,100 rpm Spindle power 4.8–5.7 kW Tool holder SK30 Tool magazine 12–32 Tools Rapid traverse X/Y/Z approx. 15 m/min Weight [weight]: approx. 3.500kg Good, working condition -without vice -Various accessories available -Monitor new Viewing can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. If you have any questions or would li ...

This 8-axis DMG GILDEMEISTER Sprint 32 linear was manufactured in 2003. It features a turning length of 120 mm and a turning diameter of 32 mm. The machine is equipped with a Fanuc 160i-B control and offers impressive spindle speeds of up to 8000 rpm. If you are looking to get high-quality multi-spindle turning capabilities, consider the DMG GILDEMEISTER Sprint 32 linear machine we have for sale. Contact us for further details.

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details.

turning diameter: 500 mm turning length: 1200 mm control: Siemens 840D greates pass round over bed: 700 mm Main spindle:: turning speed range - main spindle: 20 - 5000 min/-1 power capacity - main spindel: 25 /34 kW C-Axis: 0,0001 ° spindle diameter: 65 mm milling spindle: milling spindle motor: 23 / 13 kW milling head speed: 12000 U/min b-axis: +/- 120 ° axis stroke:: x-axis: 490 mm y-axis: +/- 100 mm z-axis: 1300 mm feeds:: rapid traverse ( X / Y / Z ): 60 / 22,5 / 30 m/min feed power: 5,6 / 5,6 / 7,4 kN number of toolpositions: 24 pos. tool taper: HSK A 63 total power requirement: - kW weight of the machine ca.: 15 t dimensions of the machine ca.: 6 x 3 x 2,3 m CNC turning and milling center - 5 axes simultaneous - CNC control Siemens 840D Ergo Line with ShopTurn - C-axis (0.0001°) - Milling head with B-axis - Y-axis - Coolant device/paper belt filter (through Spindle) - Chip c ...

This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details.

Used Tool - Tester ECO 210 Year 2005 230V

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840D table - swivable +/-: +110 / -5 ° -C-axis table rotating: 360° tool piece magazine with: 16 Werkzeugplätzen weight of the machine ca.: 3.9 t dimensions of the machine ca.: 2.9 x 2.0 x 2.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 600 Y-axis travel mm: 500 Z-axis travel mm: 500 C-axis degrees: 360º (0.001) B-axis degrees: -5 / +110º Spindle nose distance - table surface mm: 600 Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 10 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: 500x525 Max. workpiece weight kg: 240 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Max tool weight kg: 6 Chip-to-chip time: 4.5 Equipment  ...

This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 200 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details.

diameter range 2-5,2 mm shaft length under head 120 mm cutting length 146 mm output pieces/min 105

CNC lathe Type: T1 Manufacturer: DMG MORI Year: 2023 Control: Siemens Sinumerik One + JobShop and ShopTurn Swing over bed: 550 mm Swing over support: 320 mm Max. turning diameter: 300 mm Diameter of clamping chucks – main spindle: 210 mm X: 232.5 mm Z: 410 mm Rapid traverse X/Z axes: 30/36 m/min Spindle nose: A2-6 Inner diam. of front bearing: 120 mm Spindle bore: 73 mm Max. diam. of machined bar: 65 mm Max. spindle speed: 4500 rpm Turret VDI: 12 positions Number of driven tool stations: 12 Max. speed: 5500 rpm Hydraulic tailstock Automatic tailstock travel range: 410 mm Tailstock sleeve taper: MK 4 Chip conveyor Machine weight: 3400 kg In very good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details.

x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm total power requirement: kW weight of the machine ca.: 8800 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details.

x-travel: 2600 mm y-travel: 1100 mm z-travel: 920 mm tool magazin:: 30 internal coolant system feed: 40 Bar tool taper: SK50 total power requirement: --- kW weight of the machine ca.: 26,1 t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 560 mm, 520 mm

Inv. Num. : 9131 Type: DMU 60 T Producer: DMG Created: 2001 Parameters: Control system: Heidenhain MILL PLUS Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 560 mm Z-axis travel: 520 mm Machine height: 2900 mm Machine length: 2900 mm Machine width: 2200 mm Machine weight: 6500 kg Equipment: Tool Holder

Hours in picture. 1999 DMG (Deckel Maho) DMU 80 T is a high-precision CNC universal milling machine. It was a staple in toolrooms and production shops at the turn of the millennium because it bridged the gap between a standard 3-axis mill and a full 5-axis machining center. In the late 90s, the T series stood for Table, featuring a large fixed table with a swiveling milling head, making it incredibly versatile for large or heavy workpieces Find more here - .ucymachines/ Contact us at - sales@ucymachines

CNC vertical machining center Type: DMC 1035 V ECOLINE Manufacturer: DMG MORI Year: 2012 Control: Siemens Sinumerick 840D Total hours: 12,058 Spindle hours: 5,039 X: 1035 mm Y: 560 mm Z: 510 mm Working table: 1200 x 560 mm Tool magazine: 20 positions Max spindle speed: 8,000 rpm Chip conveyor Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1000 mm y-travel: 800 mm z-travel: 500 mm control: Siemens 611 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: DMC 1035 eco Manufacturer: DMG Year: 2010 Control: Siemens Sinumerik 810D Total hours: 25,503 Spindle hours:13,362 X: 1035 mm Y: 560 mm Z: 510 mm Max spindle speed: 8,000 rpm Tool magazine: 20 positions Rapid traverse X/Y/Z: 30 m/min Rated power: 17 kVA Torque:83 Nm Table:560 x 1200 mm Table load: 1000 kg Chip conveyor Dimensions: 3137 x 3355 x 2758 mm Machine weight: 4250 kg In good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details.

Overview  This isobaric beer filler was manufactured in 2002 by German company KHS. The machine is configured for 500 ml glass bottles with crown cork and achieves a capacity of 44,000 bottles per hour. It was used for filling beer at 10–12 °C. The machine will be available from November 2025 and remains installed until then. A site inspection can be arranged upon request. Technical data  Capacity: 44,000 bph (500 ml glass bottles) Formats: 500 ml glass bottles Filling principle: Isobaric (mechanical filling system) Number of filling stations: 144 Crowner: 24 stations (crown cork) Operating voltage: 400 V Frequency: 50 Hz Control system: Siemens S7-400 Control cabinet: Air-conditioned, stainless steel Operating hours: approx. 30,000 (as of Nov. 2024) Direction: Left to right Scope of Delivery Filler: KHS Innofill DMG SVF 144-KK24 Crown corker with 24 stations Control cabinet and ope ...

This 3-axis DMG CTV-250 was manufactured in 2012. It features a maximum workpiece diameter of approximately 350 mm and a chuck diameter of 250 mm. The machine is equipped with a 12-position turret and operates at spindle speeds of up to 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTV-250 vertical turning machine we have for sale. Contact us for further details.

X-axis: 880 mm, Y-axis: 630 mm, Z-axis: 630 mm, table dimensions: 1250 × 700 mm, table load capacity: approx. 500 kg, B-axis (milling head): manually or NC swiveling up to 103°, maximum spindle speed: 12,000 rpm, power: 15 kW, torque: 130 Nm, tool holder: SK 40, tool magazine capacity: 32 positions, control system: Heidenhain TNC 430 MillPlus, length: 4073 mm, width: 3323 mm, height: 2375 mm, weight: approx. 9.5 t. An on-site inspection is possible.

This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details.

x-travel: 1350 mm y-travel: 560 mm z-travel: 510 mm Control: Heidenhain iTNC 530 total power requirement: 13 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details.

A vertical CNC machining center DMG is offered. Travel X/Y/Z: 635mm/510mm/460mm, spindle-to-table distance: 120mm-580mm, table size X/Y: 790mm/560mm, table height: 720mm, max. table load: 600kg, feed rate X/Y/Z: 20m/min, rapid traverse X/Y/Z: 25m/min, max. feed force: 5kN, max. spindle speed: 8000rpm, max. spindle power: 18.9kW, max. torque: 100Nm, tool holder: SK40, tool magazine: 20 positions, max. tool diameter: 80mm, max. tool length: 250mm, max. tool weight: 6kg, tool change time: 1.6s, control: Heidenhain iTNC 530, total power-on hours: approx. 25232h, spindle running hours: approx. 8801h. Inspection possible by appointment.

General SKU204U049 MakeAzo TypeTFS 140x3350LG Mach.No.446631 Year of construction2003 Main Features Motor1.5 KW Length3330 mm Inlet diameter115 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Diameter150 mm Length4000 mm Between inlet and outlet2600 mm Shaft diameter50 mm Pitch110 mm Inlet115 mm Outlet150 mm Motor1,5 kW Screw speed120 rpm Outlet height823 - 1760 mm With coverscheck MaterialStainless steel 1.4301 (304) General LocationBarneveld Mounted inclined in framecheck Mounted on wheelscheck Floorspace4,3 x 0,8 m Total height2.6 m Weight420 kg CEcheckFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAn ...

This 5-axis DMG DECKEL MAHO DMU 100T was manufactured in 2003. It features impressive travels of 1,080 mm in the X-axis, 635 mm in the Y-axis, and 710 mm in the Z-axis. The machine includes a fully refurbished Nikken CNC rotary tilting table and an Erowa Robot Easy automation system with 12 pallet stations. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 100T universal machining centre we have for sale. Contact us for further details.

x-travel: 1050 mm y-travel: 800 mm z-travel: 560 mm Control: HEIDENHAIN iTNC 530 Tools changer: 30 pos. table-size: 950 mm turning speeds: 28000 U/min output: 55/43,5 kw taper: HSK A 63 a-axis: -10º/+110º ° c-axis: 360 ° Internal cooling system: 10 - 80 bar table load: 800 kg total power requirement: 80 kVA Total weight, approx.: 13 t dimensions of the machine ca.: 3,6 x 3,8 x 3,18 m 5-axis machining centre DMG-MORI HSC 105 linear - CNC control Heidenhain TNC 530 - Tool changer 30-fold (HSK A63) - NC rotary table 2606h Spindle Hours The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 200 mm y-travel: 200 mm z-travel: 280 mm Control: HEIDENHAIN iTNC 530 table - swivable +/-: -10 / +130 ° -C-axis table rotating: 360° milling head: 42000 rpm tool piece magazine with: 60 Werkzeugplätzen weight of the machine ca.: 5 t dimensions of the machine ca.: 2 x 2 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.