dl used for sale

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug

HPE - DL360 Gen10 5220R 32G 8SFF Reman Svr - TAG CZ214609H4 Does your data center need a dense, secure, performance-driven server that you can confidently deploy for virtualization, databases, or high-performance computing? The HPE ProLiant DL360 Gen10 Server delivers security, agility, and flexibility without compromise. Auction-ID: A1-47049-47

Pressure Monitor KROM SCHRÖDER DL5K pmax 300 mbar 0.5 to 5 mbar Dimensions: 95 x 90 x 50 mm

Specifications Manufacturer Siemens Model SGT-600DLE Year 2025 ( Complete overhaul ) Condition new Wattage 24,5 MW Hours 0 Frequency 50 Hz/ 60Hz Fuel Type Natural Gas Voltage 11000 KV Quantity N.1 Located EUROPE General Information - The turbine operates at 50Hz or 60hz . Timeframe for an additional power supply. - The turbine operates on natural gas - New core engine, 0 hours engine - Core engine is under warranty by Siemens - Low emissions and long maintenance intervals - Suitable for power generation and mechanical drives 2. Device specifications 1. Power output: 24,5 MW(e) 2. Fuel: Natural Gas. 3. Frequency: Dual 50/60Hz 4. Gross efficiency: 35.00% 5. Heat rate: 10,294 kJ/kWh (9,756 Btu/kWh) 6. Turbine speed: 9,500 rpm 7. Print ratio: 16.9:1 8. Exhaust mass flow: 40.0 kg/s (88.2 lb/s) 9. Exhaust gas temperature: 555°C (1,031° ...

Make: J. Schneider Elektrotechnik GmbH Type: Industrial Transformer / Power Supply Unit Model: DLAB 50F Year: 1999 Serial number: 203937/1 Technical data: - Rated power: 34 kVA - Frequency: 50 Hz - Primary voltage: 360 / 380 / 400 V - Primary current: 87 / 83 / 78 A - Secondary voltage: 415 / 436 V / 200 V - Secondary current: 76 / 77 A / 156 A - Phase: 3-phase - Protection class: IP33 - Cooling: Air (AN) - Standard: VDE 0532 Equipment: - Integrated electrical cabinet with main switch - High leakage current transformer system - Industrial heavy-duty housing - Power connection cables included Application: - Power supply for industrial machinery - Suitable for CNC machines or heavy equipment Condition: Used Auction-ID: A7-45993-46

CHRISTIE - SET of 5 CHRISTIE DWU Model DWU960ST-iS DLP Laser Projector - (2022) Auction-ID: A1-47049-17

Does your data center need a dense, secure, performance-driven server that you can confidently deploy for virtualization, databases, or high-performance computing? The HPE ProLiant DL360 Gen10 Server delivers security, agility, and flexibility without compromise. Auction-ID: A1-47049-46

Air Operated Diaphragm Pump Type/s DL15-PM-TTT Technical data: - Connection Size Medium - 1/2\" BSPT Female Thread - Material housing - PP polypropylene - Middle part - PP polypropylene - Material diaphragm - PTFE - Material O-rings - PTFE - Material check valves -PTFE - Flow rate max. - 2.2 m³/ h - Medium pressure max. - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXD - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE membrane for the highest chemical demands, very good resistance against aggressive media and chemicals, temperature range: -5 °C – +130°C. PP polypropylene housing has high resistance to acids, inorganic acids and bases. Also available as electric conductive housing material available. Temperature range: 0°C – +60°C Auction-ID: A1-47017-54

Auction-ID: A1-40140-42

Bucket separator for excavators from 4-12t; Volume: 0.27-0.37m³; Pickup: OilQuick OQ45-5; bellowed; Auction-ID: A7-47086-181

82MW ISO rated combined cycle power plant. The plant’s main equipment is composed of a Rolls Royce Trent 60 DLE Gas Turbine (also known as the SGT-A65), a Nooter/Eriksen HRSG, and a Siemens SST-300 Steam Turbine. These are below; 1. Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; · Manufactured in 2016, delivered in August 2017. Never used. · 65.9 MW(e) ISO · 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate · DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas · Cold start to full power in under 10minutes · 50Hz, but easily convertible to 60Hz · Engine still preserved in original shipping container · An aero derivative gas turbine 2. HRSG is licensed by Nooter Eriksen USA; 3. Siemens Steam Turbine Generator SST-300 C2S/C160; · Manufactured in 2016 · Output 15.75MW ISO · Speed 7059 RPM · Admi ...

Mäder DLP 1700 HV Direct Acting Air Press Press Direct-acting air presses are used wherever the compressive force is required constantly over a longer distance or where a large immersion depth is required: e.g. when pressing pins, bushings and ball bearings or when forming. DLP 1700 HV Direct-acting compressed air press Compressive force at 6 bar: 17 kN Working Stroke: H mm: 40/60/80 More items - new and used - can be found in our shop! International shipping costs on request!

This Priess & Horstmann BMA-DLS-CNC was manufactured in 2000. Ideal for woodworking applications, it offers reliable performance for a variety of tasks. Consider the opportunity to buy this Priess & Horstmann BMA-DLS-CNC woodworking machine. Contact us for more information.

NERI DL400 type V duplex vignette labeller, for top labelling of cartons or similar. Fitted with two labelling heads, carton size range from 80 x 30mm (W x L)) to 180 x 120mm (W x L). Output up to 100 cartons per minute. All stainless steel construction.

Double door depyrogenation owen De Lama model DLST/L year of manufacturing 1998. Useful capacity 5440 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 157 kW. Maximum working temperature 250 C °.

DEPA Compressed Air Diaphragm Pump Manufacturer: Alfa-Laval Type: DL40-UL-T-T Item #: 09855 Year of construction: 1999 LBH: 350 x 460 x 700 mm

I sell here several machines, equipment, forklifts, work platforms, spare parts for forklifts and work platforms and spare parts and accessories for woodworking, so be sure to pay attention to my other auctions Trailer work platform Trailer work platform Telescopic lift lift DENKA Type: DL21 Year of construction: 2000 Payload 200 kg Platform dimensions approx. 1.0 x 0.7 m Transport dimensions approx. 8.2 x 2.46 x 1.8 m Weight approx. 2500 Kg Working height approx. 21.3 m Platform height approx. 19.3 m Range approx. 9 m (center basket/ 80Kg) hydraulic shunting drive (mobile from the basket) automatic cable reel Support can be operated from the basket TÜV: 08/2024 UVV: 08/2023 Extensive overhaul work was carried out on the stage: - Paint renewed. - Hoses renewed. - new batteries - all oils changed. - new test book issued ...

Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.

Double door autoclave De Lama model DLOV year of manufacturing 1998. Useful capacity 4990 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 6 kW. Maximum working pressure 2.5 bar. Maximum working temperature 138.2 C °. Installed cycles: A sterilization + drying B for vials C For closed containers I test cold vacuum machine J sterilization air filter in situ

Parallel Lathe WMW NILES type DLZ 500 IV L 1000 Between points: 1000 mm Maxi Ø on bench: 500 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 50 mm Spindle speed: from 28 to 1400 RPM 3-jaws chuck Ø 200 mm Threadings: Metric + Whitworth Tailstock CM4 Auto Feeds transverse + longitudinal + rapid Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3000 x 1400 x 1500 mm Weight: approx 2,5 T

Dry Transformer Manufacturer: Schneider Type: DLPS 63E The device is NEW and fully functional. see pictures for more details.

Dry Transformer Manufacturer: Schneider Type: DLPS10F - 0617T07001 The device is NEW and fully functional. see pictures for more details.

Product number: 3068 Type: DLSO1500 Brushes: 1100 mm Power: 3 x 400V, 50Hz, 0.6kW Water inlet: R3/4", 4 - 6 Bar Water outlet: DN50 Dimensions: 2600 x 900 x 1300 mm Weight: 120 kg

Transformer Dry Transformer Manufacturer : Schneider Type: DLPS10F - 0617T07001 The product is NEW and fully functional. see pictures for more details.

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Alfa Laval, air-operated double diaphragm pump -Type: DL25-AA-EET-Q -Flow rate: l/min -Discharge pressure: bar -Total dimensions: 240/230/H300 mm -Weight: 8.7 kg

Diaphragm pump, compressed air diaphragm pump, chemical pump, compressed air-operated double diaphragm pump -Manufacturer: Depa, air-operated double diaphragm pump -Type: DL25-FA EEE P -Flow rate: l/min -Discharge pressure: bar -Dimensions total: 340/240/H325 mm -Weight: 9.6 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type DLW 12/20 SN -Input voltage: 220 V 50 Hz -Power: 12 V/20 A -Dimensions: 410/200/H340 mm -Weight: 12 kg

gear motor, electric motor, electric gear motor -Manufacturer: ABM Baumüller, gear motor type IIb / DLB 421 -Speed: 50 rpm -Power: 0.8 kW -Design: B3 -Shaft: Ø 35 x 80 mm -Dimensions: 475/240/H235 mm -Weight: 38 kg

Centrax 501 KB57 DLE Gas Turbine-Generator Package engine overhaul in 2017 at 24 000 hours 372 start service hours 23 000

8x ProMinent dosing pumps DLTA1020PVT2000UA1030DE0

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Required air-pressure: 6 bar 0: 6 m coolant capacity: 7 m3/h Air Operated Diaphragm Pump Type(s) DL25 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, three-phase isolation transformer -Manufacturer: J Schneider, transformer type DLES 1.78-881129T4 -Power: 1540 VA -Technical data: see photo nameplate -Dimensions: 200/130/H230 mm -Weight: 14.3 kg.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide -Linear drive: stroke length 620 mm from Achterberg Toolbase AK -Actuator: DLG 060-068.01 -Threaded rod: Ø 12 x 615 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 745/80/H80 mm -Weight: 1,7 kg/piece

Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Condition of machine bed: very good -Machine bed: hardened -Manufacturer: Martin, lead screw and feed screw lathe type DLZ 502 -Turning length: 2200 mm -Turning diameter over bed: 580 mm -Turning diameter over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools (see photos) -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Required air-pressure: 7 bar weight: 3 kg dimensions of the machine ca.: 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2 BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Tempera ...

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

SPECIFICATIONS: Air flow rate L/min: 1500 Pressure bar: 16

Extra info: 3 ton Weight: 0,15 ton Length mm: 2000 Width mm: 400 Height mm: 2500 Working height: 100 Transport size L x W x H: 2000 x 400 x 2500 Missing parts: None Photos/film available: Photos available For more information, please mail us: salestecfort.nl

Mettler DL 39 KF Titrator with Autosampler Stromboli (13 Pos.) Printer and titration vessel, software Timax light

Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Key data: 1140 °C

Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...

The products to be welded are loaded into suitable holders on a rotary indexing table. Assembly takes place in station 1, laser welding in station 2. The cell is designed as a sit/stand workstation. The products are placed in a rotary indexing table. After turning the rotary indexing table, the machine starts automatically. The machine is equipped with an automatic rotary indexing table, with friction wheel drive. A light curtain is not required. The drive slips in the event of an unforeseen load. Laser welding machine WOLF "Quasisimultaneous" Laser welding machine for "Steller" with semi-automatic rotary indexing table PC and touch screen included Find more here - / Contact us at -

Contactor, semiconductor contactor, contactor, power contactor -Maximum: 22 kW 660 V -Price: per piece -Number: 8x available -Dimensions: 135/85/H115 mm -Weight: 6.5 kg

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Fully automatic continuous system, 30cm belt width with hold-down belt and additional belt insert with turning station Frying length 2.35m with digital control for 7 different programs Bandgesch, adjustable mobile with fully automatic quark ball station with additional jolting for wreaths mobile tested and cleaned Immediately available from stock